Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
A subsequent patch brought me to realize that I was not checking the
return values from operational calls to the engine. Also, noticed
that on any failure we'd stop submitting IO but still wait until the
timer expired to exist. To match what other perf tools do, now
continue to submit even after an error and run until the clock is
out giving an accurate count of transient failures and successes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5e6a0f382f9090e428ee67fbdfb60926e9c85917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In case when no device supporting Namespace Managment was found,
the test case exits without producing an error.
For example QEMU NVMe emulated device does not support it, thus
only physical devices have to be used right now.
This goes against design of "run_test" function, that when executed
should always run and never silently skip.
This patch adds check whether there is a device support and triggers
the test case only then.
Note that original code for selecting the device is still in original
script. This is to enable running nvme_ns_manage_cuse.sh on its own.
Right now CUSE tests are only enabled on VMs so nvme_ns_manage_cuse,
was added to exception list.
This will soon be reverted as the tests are moved to job that
runs on physical machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie784696c2628b5fe45ce751b3978abcc03118cd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2828
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added more comments for clarity.
Moved namespace size calculation to the clean_up() function.
Changed size calculation from nvmcap (id-ns) to tnvmcap (id-ctrlr).
There is noneed to cache the size before deleting namespace,
if we assume that all devices had single namespace encompassing the
whole device.
Changed blocksize from 512 to 4k. All devices in CI should support that,
and usually thats the default.
This could be further improved by reading LBAF and checking the Relative
Performance (RP), but that would convolute the test scripts. This
is good enough.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8a38d00ae1442edf5480e4e72a8a8aa90380cd79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
It is already assumed that enviroment was prepared,
setup.sh ran binding the drives.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I864590b57db880b33c7b32deba8d38e4d5637b5b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used couple times in cuse test, so move it to common script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e9f973e7fb53b0024fb320d37632e1e011ba3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2824
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This will help with managing the test execution and preparation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0bd3612381d031a4015335d162f1296fd6dd213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"nvme_cuse" name for run_test was already used by one
of the tests in nvme.sh.
This removes the naming conflict and will prepare for further
restructure of nvme-cuse tests, where "nvme_cuse" name will
encompass all cuse tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If141fe0ef492e0cde8e68490550de5d48fecb5e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This might be helpful if secondary processes cannot start due to
conflicts in address map.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I180dc09b4cad3b0064f009b0f553f5929de6566c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2776
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In SPDK 20.07 will be deprecated, this means that CI
will no longer build or test the VPP component.
With SPDK 20.10 VPP the implementation and test scripts
will be removed.
autorun_post.py processes all run_test instances to
verify that they were executed. Since CI will skip
VPP tests, it needs to be added to list of exceptions.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I06c76643e6189d32471d9f53a0987e52f167844b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When read I/O to the controller failed, clear
rdma_req->num_outstanding_data_wr to zero to avoid
rqpair->current_send_depth goes to negative after completing data
transfer to the host.
This bug was apparent when the outstanding read I/O was aborted.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62e439f946ef81ea0b5de5280670ed97fe8d977f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2341
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This will help us to change the host identifier if required, moreover,
some drives sometimes report set host identifier failed when startup,
so set host identifier at runtime making more sense.
Change-Id: I939c059d890b06aa2d51e82e0dede9630a6a1b51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We don't want these internal functions to show up in the
object files with an spdk prefix.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic14cbe2963e176bddbff1a729b503f972a78419d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2871
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is technically a function that will remain
static in the library where SPDK_BDEV_MODULE_REGISTER
is invoked. It was missed in earlier checks because it
is created via a macro.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I32a59f88bb7c112183763f222d4e1c8c864c545a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2794
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow to specify additional argument which will tell Vagrant to enable
CMB on given nvme drive. The format of the argument is any string which
is then simply converted to plain "true". E.g.
./create_vbox.sh -b "/path_to_nvme_img,nvme,3,true"
Change-Id: I7de55e46491318b082bf4e2165260091b44d60f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable Packed Ring option in performance tests. Only BLK
stack for now, as SCSI doesn't have this option yet.
Change-Id: Ie70642dd846ada35926e17204770ea2436089432
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2716
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use system-wide fio if a specific binary was not provided.
Additionally add 1 second delay after finishing fio run
to make sure fio client-server finishes correctly.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Id7d1e7f70017755206c8fe9942ef8d6051a73bbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Make the variable local, so that we don't unnecessarily
read it's value from base script in case it's defined.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib4d95d3c67cfa8918c67f0b2642e9a3fe2ca3260
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
struct spdk_nvmf_fc_rq_buf_ls_request does not need to be marked
as packed. The static assert that immediately follows will catch
any inserted padding.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id11ac9865a9c60f6d147d0f829d272ca791d0336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2683
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For completeness, now all output is placed into build/ in the
appropriate location. In the future, 'make install' can be changed
to simply copy from there instead of rebuilding.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I236b37868b5f4a2d5c5b910090aeaa9dff0501e2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2381
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The packed ring can supply up to 10% performance promotion.
Let's set the packed ring format as default.
Change-Id: Ie722417d20f3355769eefce4fec9831c60976e6f
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the operation function is not specified in spdk thread lib init.
Add a info logs to tell user that you should manage and poll the
thread.
Change-Id: I536c6954c129fbbbc2d19776866fa348d49688ee
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will skip the test case if the drive didn't report such
capability, this isn't treated as an error case.
For vagrant environment, the namespace size is set to 1GiB or
2GiB, so here we also change the test LBA start from 0.
Also use printf instead of fprintf for normal exit.
Change-Id: Ib9f845ae548452921564aafebd2b23da6310b071
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2768
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will open up the way for probing and connecting to
all of the namespaces on a pci controller.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8fa3dde9f249ce826659882e66f630b8c25e2701
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2779
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
See commit msg from db43b387:
"Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests."
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifa70a51822f78e95b6cddbfe665ea95ec1b423c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These returns at the end of functions, so remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1f54d812956727e1871f4879c8bc9a526d7d14c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The implementation of Calsoft case tc_login_29_1
is wrong. We should return "Irrelevant" to the initiator
when Session type is discovery.
Also also update the known failure test cases of
Calsoft.
Fixes 958.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I38cd2cf39bf80fd025ab74bc9dfe6ac412d01328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2846
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The plan is to push the logic that assigns qpairs to poll groups down
into the nvmf library. To do that, we'll need to have a list of the poll
groups.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iea59ac1a439dbd1bcae68fb2977a47a855884a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
When we conduct the ip migration test (i.e., switch the iSCSI target
process from to first process to
second). This time may exceed the 5s in some cases, so
FIO process will exit with error and make the test fail.
Because The total FIO execution time is 10s, and we sleep 5s
in the script. So propose the following approach:
1 Change the sleep from 5s to 3s, we do not need to sleep
it too long for FIO.
2 Extend the FIO execution time from 10s to 12s.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I07d488c6e8a94733534acc1acd2ba8778c4d2eb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2801
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We should wait until login fully performs before fio tests
to avoid intermittent failures.
(Suggested by Shuhei according to the rbd issue fixed previously)
Fixes 1313
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I331bf6d69bf0a5c9ef6e36c4325334159062f949
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2815
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Include completion operation into nvmf_qpair_abort() and rename
it by nvmf_qpair_abort_aer() for clarification. Update unit test
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I763cc7d24b979e27e8775f4e69730466a2351bdf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2712
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvmf_ctrlr_abort_aer() has not been used anywhere, and so we may be
able to remove it, but let's update it to set the completion status
of the aborted AERs to ABORTED for future potential use cases, and
then rename it by nvmf_ctrlr_abort_all_aer() to avoid name conflict
with the next patch.
Setting the completion status to SUCCESS is not good in this case
anyway.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie49936429b82dd05724cf8f10a1417e9c5304635
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2709
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
