In nvmftestfini we try to kill the nvmf application, but this doesn't
get set by nvmftestinit. I think that nvmftestfini and nvmftestinit
should be symmetric options, or at the very least, one should be able to
call fini right after calling init without fini failing.
Change-Id: I14f274f940ec20c2d5f8d831fed3f6d6c4c6d2ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Correct shellcheck rule SC2128: Expanding an array without an index only gives the first element.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0e7c335af678114dc78dfb12a02369a69158e435
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This will allow us to reset the controller when we get disconnect events
from the underying transports.
Change-Id: I825985219f98ff65cfcf7581757bd26db5bd08ba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A recent change to the way we grep to determine whether an IP is
soft_roce caused this functions return value to flip. This is causing
the multiconnection.sh tests to fail on nightly.
This change flips the return value back.
fixes: f924c94b
Change-Id: If524ff695593365bb7b26bab8efe71213737858b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the test pool, if a vm has previously had the soft-roce rxe module
loaded, it will report up that the NIC is using Soft-RoCE. If we are
doing the nvmf_tcp tests, then we should not exit prematurely.
Change-Id: I67683632b0457a488826e207e77a4813bac982c9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make sure we don't crash or do any other bad memory accesses when we
fail to connect to a discovery controller.
Change-Id: I7c3e25899bc78f4beff9ad017612bacf286d52c7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474153
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is an intermittent failure on the CI involving RXE and the target
disconnect test. We believe it is an internal issue in RXE. So for the
time being, disable that test when using RXE.
Fixes issue #1043
Change-Id: I5cc11e51c398e132a09baf3a26e48aa4ae7370a3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474279
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We should alert the upper layer when the qpair becomes unusable due to
qpair errors.
Change-Id: Icdee3b55a14441a60111f3bd7a44dceef93bbb09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474095
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
just a little cleanup.
This patch series is aimed at enabling reset handling in the spdk nvme
bdev module and demonstrating how it will work using a test in bdevperf.
Change-Id: I1f9108aa2e6f197c8e1c138f0e3205d78fa89dce
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473760
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Correct shellcheck rule SC2124: Assigning an array to a string!
Assign as array, or use * instead of @ to concatenate.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id74c55b7e1c41b6469e84ac388cf8a5bd8e562a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473276
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We tried to change all of these when updating the RPC
names, but there were some that were missed apparently.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b27d658bb039f201ca003b1d9005e7cfa8c45c2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Modifying the target_disconnect.sh test to include an example of
transport_id failover for an NVMe-oF controller.
Change-Id: I746ed737ab56c7dec6ee99e840c631ba46ee359e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is simply a dumbed down version of perf so that we don't add extra
functionality to perf that might impact its performance.
Change-Id: Ia2716a61abcc5269dafcda394d40517d156fdb2a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Check exit code directly with e.g. 'if mycmd;',
not indirectly with $?.
Rule disabled in test/pmem/common.sh as behaviour
may differ depends on bash version
Change-Id: Ied4c5dfb09e52c5db08becf1ad69a29a1bda426b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Correct shellcheck rule SC2022: Note that unlike globs,
o* here matches 'ooo' but not 'oscar'
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ie201a8401c5c501e1fff3d0eb71409163893768e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469983
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The example application doesn't really make use of these RPCs for the
time being, so add a simple test to make sure they get exercised.
Change-Id: I8ae4c7b769428b76200f71c771ae98f85ede4640
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new test flag SPDK_RUN_NON_ROOT forcing some of the
SPDK applications to run as an unprivileged user. For now
we implement it in nvmf tests. If enabled, nvmf_tgt will
run as the user who invoked `sudo ./autotest.sh`.
Running SPDK as non-root has two major prerequisites right now:
* there must be an IOMMU in the system in order to use PCI devices
* DPDK version must be either < 18.05 or >= 19.08-rc1
Change-Id: If1ba9dfcc09fc6cac059867408a1b54eddecfb4b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A sub-team over a year ago agreed that there was not enough value
in checking test plans in to the repo as they require maintenance
and their primary purpose is not to document how the module is tested
but to facilitate discussion during test development. It was agreed
that we would use the review system to iterate on test plans but once
the actual tests were developed that the plan would not get checked in.
This patch just removes those that were likely in the repo before that
discussion.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I75dcdd8b4754b7ecb4a21079b251c707557a3280
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If there are enough subsystems, the discovery log page spills
over to a second page. Add a test to confirm that is working.
Change-Id: I1df57b0b9a543736fe4c48f2cfe5628cb963a631
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466820
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Double quoting of string in "$IO_QUEUES" results in bash
replacing the variable with '-i 8' instead of just -i 8.
This makes nvme-cli to consider the string as a single
option, not a key/value pair and results in
"Invalid argument" error.
Change-Id: Ibc2f6324baa3c90aa7bf43128c5e7486e38c1fc1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By default nvme-cli will try to connect to subsystem using
number of io queues equal to number of available cores.
In case of more powerful CPUs and HT enabled this results in
more time needed to allocate resources.
Using "-i" option for nvme connect allows us to control the
number of IO queues and avoid timeout issues when testing.
Fixes issue #927
Change-Id: Ibb9b89b2d8be84fba29360db0f781cc99ae5c5b1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466389
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previous commit which fixed this styling issue was not
rebased before merging, so this single place was missed.
Change-Id: I67c5024322c97afd031b3a28ab3dfd686cd96cee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465125
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix SC2064 issue.
Use single quotes, otherwise trap expands now rather than
when signalled.
Change-Id: I0b3a9157f52eed037e8d217f639c64d6876ec1e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
This test is meant to simulate uncommon network situations where lots of
I/O are getting dropped before they get to the initiator. Essentially,
we are trying to trigger the initiator timeout in the kernel which
disconnects from the target and reconnects after 10 seconds.
This test is different from the other tests that we have currently
because it doesn't rely on killing either the target or initiator.
Instead it expects the target to stay up and properly respond to the
initiator error conditions. The hope is that the fio job running on the
initiator can still complete successfully and the target doesn't crash
due to improperly handling the disconnect and reconnect.
This test should be added to the nightly CI jobs because it is rather
time consuming.
Change-Id: Id457d9eb21a980140f065663547b89b2c69ace93
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Fix SC2007: Use $((..)) instead of deprecated $[..].
SC2007 removed from check_format.sh exclude list.
Change-Id: Ifd858857e461d785d6d6f101acca13c326ee637e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't require these to be numbered.
Change-Id: I385f579b41d24eea02e157e53c4fc1530864bb5b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The "-s" causes ERROR printing, because it has been deprecated.
So I modify it to equally functional "-z".
Change-Id: I9c34bd98fef2c2bd346d288b6a20338be02382f5
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Phenomenon:
Test case: Using the following command to test
./test/nvmf/target/shutdown.sh --iso --transport=tcp
without this patch, it will cause coredump.
The error is that the NVMe/TCP request in data buffer
waiting list has "FREE" state.
We do not need call this function in
spdk_nvmf_tcp_qpair_flush_pdus_internal, it causes the
bug during shutdown test since it will call the function
recursively, and it does not work for the shutdown path.
There are two possible recursive calls:
(1)spdk_nvmf_tcp_qpair_flush_pdus_internal ->
spdk_nvmf_tcp_qpair_process_pending ->
spdk_nvmf_tcp_qpair_flush_pdus_internal ->
>..
(2) spdk_nvmf_tcp_qpair_flush_pdus_internal->
pdu completion (pdu->cb)
->..
-> spdk_nvmf_tcp_qpair_flush_pdus_internal.
And we need to move the processing for NVMe/TCP requests
which are waiting buffer in another function to handle
in order to avoid the complicated possbile recursive
function calls. (Previously, we found the simliar
issue in spdk_nvmf_tcp_qpair_flush_pdus_internal for
pdu sending handling)
But we cannot remove this feature,
otherwise, the initiator will hang for waiting the
I/O. So we add the same functionality in spdk_nvmf_tcp_poll_group_poll
function.
Purpose: To fix the NVMe/TCP shutdown issue.
And this patch also reables the test for shutdown and bdevio.
Change-Id: Ifa193faa3f685429dcba7557df5b311bd566e297
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462658
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When individual tests were run with --iso --transport=tcp, the
check_ip_is_soft_rocefunction incorrectly marked the loopback ip address
as soft_roce due to 'lo' matching with a notice message from the rxe_cfg
config command "module rdma_rxe is not loaded". Instead, grep
specifically to make sure that the argument we are matching against,
which is supposed to be an rxe interface name, contains rxe.
rxe interfaces are numbered sequentially as rxe0 rxe1 . . . rxen
Change-Id: Ibe8afb3e038e104173eb1e2bbf671ce9f417ffeb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test is very unstable on TCP. Until we can get to the bottom of the
latent failures, we should disable it. This will allow us to continue
testing a substantial amount of tcp functionality while avoiding latent
failures in the test pool.
Change-Id: I3c7ec2709ad81a3ec5c1a4d56027b27a9c6ffc7e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When you run verify on bdev perf, it rejects any user provided core
masks and pins itself to core 0. We were also running the NVMe-oF target
on cores 0-3. Occasionally I was seeing the shutdown tests failing
during the waitforio step. It seemed like the target and bdevperf were
both still online during this failure, so my hypothesis is that the
bdevperf poller was stealing all of the cycles from the NVMe-oF poller
completing I/O so the I/O wasn't completing.
Even if that's not what's happening, it is probably a good idea to split
the NVMe-oF application and bdevperf onto different cores.
Change-Id: Ib3b5b00e639ebd14bd1ed2cfb4b7782076ca364c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462551
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In the RDMA transport, the initiator doesn't properly pick up the lost
connection and we have to kill it. However for TCP, the initiator
realizes the closed socket and fails out. Then when we go to kill it, it
fails the test. So add and || true when killing the perf processes.
Change-Id: Ifed5d726946bad2e9396db40b40f1fee72b4597f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Kernel versions 5.0.x do not support the -o option from our target.
Currently, kernel versions 5.1.x and 5.2.x are broken for the tcp
transport in loopback, so in order to test against a stock fedora kernel
that works, we will need to use 5.0.x for at least the next few months
until the distributions start shipping 5.3.x which contains the fix we
need.
Change-Id: I41fc5956dd4b53f03879e0adf2427872cd2337ee
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For a lot of the tests, we may want to specify different options for
each transport. I believe this will be more prevalent as we add more
transport specific options.
Change-Id: I83a915629460d1d869eaba4bc86822d7563402ac
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The file is not meant to be executed, so shebang is
not needed - let's remove it.
Change-Id: I51c32613ffb25b43a2d1b96523a8f25c853594e4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461355
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently we test both transports under perf each time we run the nvmf
tests. Once we have created a jenkins job for the tcp transport, we will
only need to run this test against the specified transport for each job.
Change-Id: I053d11f4e6d6f4b86a3f29e6c8f43e1e196bedab
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460714
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Enables us to test randomized data against the NVMe-oF target interface.
Change-Id: Ie7ab46949ccd89f74b10b79a24256aeae2df89ab
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: qun wan <qun.wan@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By moving the modprobe and modprobe -r calls into nvmftestinit and
nvmftestfini respectively, we can make these calls symmetric in all
cases The previous format where nvmfappstart was adding modules and
nvmfcleanup was being called independently to remove them started to
cause issues when we added the tcp transport.
I think this fixes#846
Change-Id: I68d18e0be5a2d4d2ea83a5a34f0aa2da268209fe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460396
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we insert the nvme-$TEST_TRANSPORT modules into the kernel, we
allow for it to fail. So, for the sake of symmetry, we should allow for
the opposite to be true.
Thanks to Maciej Wawryk for pointing out the discrepancy.
Change-Id: I3c551950cbe25382c2bbea4f390bead0ba6f2a37
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: Currently, there are many patches related with
NVMe-oF, especially related with big I/O. We need to
add a test case to guard this.
Change-Id: Iddd4070976fe6bf4926ca489d9c97f64a108a422
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also, construct this path by grabbing the home directory
of the current user.
Change-Id: Ia8d5cc2be40c0c3ac693c80a3132b970f7124183
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456704
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is much easier.
Change-Id: I4ae5f2f5b9393f65d07f39f03fa30628a40b01cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459304
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we have a really large disk, setting up a nested lvol across the
entire drive can actually be quite time consuming. When trying to run
this test on an 800G p3700 I was actually getting timeouts on the rpcs
when creating the nested lvolstore. By only taking the first 20G of the
drive to set up the stores, we end up with a much quicker test and
conveniently get rid of the timeouts I was facing.
Change-Id: Ifd43c21c66bc77b615da9b0f421e95337b4c7019
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When possible we should make sure that no silent failures or
skipped tests.
Since some of the tests use fio, autotest should fail
in those places when it is missing.
Change-Id: I97581e2df30a02445b560e3b88d03ce92986d0fd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456316
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In fio.sh we used `set +e` for bdev deletion RPCs
and for `wait $fio_pid`. Disabling errors from those
RPCs doesn't make sense. We expect FIO to fail due
to bdev hotremoval, but the bdev hotremoval itself
must succeed.
Besides, it's easy to forget to undo `set +e` so
don't use it. For `wait` we can use the following
paradigm instead:
```
rc=0
wait $pid || rc=$?
```
The same applies to nmic.sh, where we expect some
RPC to fail.
Change-Id: I66ce3504a0c6b5da497759f0688b6c0ea6480b61
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
ASAN needs to be LD_PRELOADed before SPDK fio_plugin
in order to analyze its code.
Just adding that will report any issues in fio binary as
well as the fio_plugin.
To prevent known fio leaks from affecting the results,
a suppression list for LeakSanitizer (used in conjunction with ASAN).
At this time the suppression list contains known leaks
for fio 3.3. The list might need adjustments as fio
version is updated.
Side note. Even though it is possible to specify directory
to ignore ("leak:/usr/src/fio/"). Which in theory should
suppress any leaks in fio. It has side effect of hiding
SPDK leaks as well, since the fio_plugins leaks are
seen as coming from /usr/src/fio/ioengines.c.
See below for examples of each suppressed error:
Direct leak of 42 byte(s) in 4 object(s) allocated from:
#0 0x7f9d52f3e320 in strdup (/lib64/libasan.so.5+0x3b320)
#1 0x41f267 in get_new_job /usr/src/fio/init.c:490
Direct leak of 914936 byte(s) in 10397 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Direct leak of 608 byte(s) in 19 object(s) allocated from:
#0 0x7f74422e8ca8 in __interceptor_malloc (/lib64/libasan.so.5+0x10dca8)
#1 0x44c4e1 in add_to_dump_list /usr/src/fio/parse.c:1039
#2 0x44c4e1 in parse_option /usr/src/fio/parse.c:1098
Direct leak of 173 byte(s) in 20 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44b50d in __handle_option /usr/src/fio/parse.c:718
Indirect leak of 111925528 byte(s) in 1271881 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Indirect leak of 171 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c4ed in add_to_dump_list /usr/src/fio/parse.c:1040
#2 0x44c4ed in parse_option /usr/src/fio/parse.c:1098
Indirect leak of 167 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c502 in add_to_dump_list /usr/src/fio/parse.c:1042
#2 0x44c502 in parse_option /usr/src/fio/parse.c:1098
Change-Id: I9b5811993508421be50b12af160645c77ea93d7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456315
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Change-Id: Id093b6c82d1f766ba6af13bed720977eceaa7ffc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Partprobe is a program that informs the operating system kernel
of partition table changes, by requesting that the operating system
re-read the partition table. For instance, if you create a new
partition on one of your disks using parted, you should run
partprobe afterwards to make the kernel aware of the new partition
configuration.
This is useful for issue #799.And it's compatible with other systems.
Change-Id: Icd4c85193bd9d9e6c2b32b8463e75c7a6ff06f34
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457735
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Normal return for qemu checking , this should check before vhost/common.sh.
For qemu not installed on this machine. It may be a VM. Skipping nvmf_vhost test.
Otherwise, code will exit 1 before this normal return.
And in vhost/common.sh should with qemu checking.
Change-Id: I2285fffa6fc4384b4b172e5c443019e9ab391fa0
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds functions in autotest_common.sh,
fio_bdev() and fio_nvme() for their respective plugins.
It simplifies its usage throughout the scripts.
Additionally will help with expanding the fio cmd
line with nessecary changes only in single place.
This will be used in next patch in series to
LD_PRELOAD ASAN before fio_plugin.
Note: Did not implement changes for perf scripts,
since they are usualy run separately and didn't want
to affect those.
Similarly didn't change vhost initiator tests,
because the exported directories do not work for
inside the VM. Will need to think of a way to change it
there as well.
Change-Id: Idf750ee7aa9d5e30efc0ce430d15fa45ceccb203
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456314
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the new nvmfappstart to simplify this script a
bit and bring it inline with the other nvmf scripts
that have been updated recently.
Also remove the comments about aer with temperature
threshold. We use namespace notifications to test aer
now, so there's no need to try to resurrect the
temperature-based tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9c66ed4c9456acb39d6c64d55153304eb6e07100
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456706
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change autotest.sh to pass --transport=rdma. But this
now allows someone to run nvmf.sh with --transport=tcp
to run all of the nvmf tests with the tcp transport!
Initial testing shows that bdevio.sh fails with tcp,
so only run this test with the rdma transport. Issue
#808 has been filed - once it's resolved this
restriction can be removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie50de4d67e504c84d6d8eebfe2b8c68b14f4ba2b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
While here, remove NVMF_TCP_IP_ADDRESS since we already
have NVMF_FIRST_TARGET_IP which serves the same purpose
when testing the TCP transport.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7cc4712cd9746377937e889127aa5a61566d8846
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We also no longer hardcode TEST_TRANSPORT=rdma. Users
of the individual test scripts must now explicitly
pass --transport=rdma. Support for tcp will be coming
in future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I819d69cb0906eb27b692eb2755aca5085298d779
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Right now this is empty, but we'll add to it later as
part of parameterizing this script for different transports.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf0f67ce4dd886031c37986b352129d3c556bd92
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for using scripts for tcp testing as well.
Note that this patch just hardcoded TEST_TRANSPORT to
'rdma' for now. An upcoming patch will require the
caller to pass --transport=rdma instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I085fdf51910aaf960959c71c73a187be41fd7ee8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A lot of places were still hardcoding 4420 directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff8a549addeb05e441fe3b035a84a0f8a6bf2205
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script was developed in parallel to some of the
script infrastructure improvements. So fix it up to
match the more recent changes - including leveraging
the common setup of the NVMF_FIRST_TARGET_IP, and removing
the parameters to nvmftestinit/nvmftestfini.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6cc4ef30325961822014e2835e575a950c53ecc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script was getting a bit unwieldy. adding argparse will make it
easier to add more options in the future or to set default values and
validate arguments going forward.
Change-Id: I1ffdbdf2082287ceb8a88cd3eb6ecf9bbd6c9e11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Good suggestion from Darek - let's just always
parse common script args from autotest_common.sh.
These arguments follow common arg naming conventions
(i.e. --iso) so there's no harm just doing this for
any test that sources autotest_common.sh. This has
the nice effect of not requiring scripts to
explicitly call this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id89b68c22557a5a771be407873d0e57843f0d05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
iscsi test scripts can now take two arguments -
"iso" and then the sock type (posix or vpp). They
need to be in that specific order too. nvmf test
scripts also support "iso" and we want to add
the transport type (rdma or tcp) as well. Even further
out, we may want to use a sock type for nvmf, i.e.
tcp transport with vpp.
We also have the iscsi_tgt fio_remove_nvme.sh test
that does both iscsi and nvmf.
So to make this all work a bit nicer, add a new
function called parse_common_script_args that
will take the command line arguments to a script
and set the appropriate variables, including defaults
when a specific parameter isn't specified. We will
use getopt-like behavior for this also, instead of
enforcing a specific parameter order. Then a script
could be called like this:
test/nvmf/target/shutdown.sh --iso --transport=tcp --sock=vpp
Individual test scripts then just need to do this
after sourcing autotest_common.sh:
parse_common_script_args $@
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb8d7666384991482a2d425e26ffa7525b9ac15a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's a bug in Linux 5.1 (possibly 5.0 too) where
the kernel initiator driver crashes if it can't get
one queue per CPU. This will get fixed eventually,
but for now we need to remove the cases where we
restrict the number of queues per controller so that
we can test on newer kernels.
Even on cases where we're testing the SPDK initiator,
there's no real need to restrict the number of queue
pairs.
The kernel will eventually get fixed, but we should
be testing with default behavior anyways (the kernel
wants lots of queues). We'll also want to add some
regression tests to make sure the kernel doesn't
break again. But that will all come later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9979e6d94456e075688b822b042936b63e518a4a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Rather than revert this patch, just modify the path to the common script
to enable it to pass in the test pool.
Change-Id: I33f5d89e1e118df4546f45237b55173ad30fad24
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to verify functionality between the nvmf target and
the vhost target and test extra code paths within the nvmf target
including multi-sgl stuff.
Change-Id: I3f5e9351c11ab896b75cd7bba7a69d95c1d031be
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Nested lvolstores take a very long time to create,
since the initial unmap will get broken into
one unmap per cluster for the underlying lvol.
This test is working fine in the test pool, but they
have much smaller SSDs. My system has a 3.7TB SSD,
and this test times out.
So don't bother clearing the nested lvol store - this
saves unmap operations. We still have unmap operations
when deleting the nested lvol, so increase the cluster
size for the main lvolstore to 1GiB to reduce the total
number of unmap operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29a254fff443e963cd620b55e78092d6a96f8ddd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Just name the malloc bdev explicitly. And since there
is only one bdev, remove all of the unnecessary loops.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie3b55161d6ebee64497bc9726edaa3fbf04bb445
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454690
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1) remove unnecessary disconnect for cnode2 - this
subsystem doesn't exist (and the || true was
hiding the failure
2) remove || true from the cnode1 disconnect
3) remove extra spaces when assigning nvme_model -
maybe these spaces are OK on some versions of
bash, but when I run this locally this doesn't
work at all
4) remove trailing spaces from model returned by
identify data before comparison
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If3dd7ddc2ba44fc880e5b398b5fe0922b6637b80
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454689
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few test scripts were creating 128MB malloc bdevs
instead of 64MB - but there's no real reason for the
difference. So make them all the same. A future
patch will make all of these size variables common
instead of duplicated in each file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I865ef08f384e026d0d3e7b064fb3a2d5958f054c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454688
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adding the second bdev doesn't provide any real value since
it's the same kind of bdev.
While here, explicitly name the malloc bdev to simplify
the test some more.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide6da901d4b90383cc73fa195b5a070a8eda0d01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454687
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1) specify malloc bdev name explicitly
2) just use a single loop variable
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fb4fc28715f7303fc2b39de80985939ab469887
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454686
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparatory patch for specifying the transport
when calling the script. Better to use "rdma" across the
board instead of a mix of "rdma" and "RDMA".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If7170cff6ba2ec51e92a0423c0b24cc141054b55
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454685
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All of the checking for NVMF_FIRST_TARGET_IP, starting
the target, waiting on the target and modprobing
nvme-rdma is duplicated in every script. So move
a lot of this either to nvmftestinit() or a new
nvmfappstart() function in common.sh.
Also just kill the nvmf target in nvmftestfini, rather
than the script to explicitly kill it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5864404610a4244473f460d48264de92687ed867
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454678
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pull this parameter when sourcing common.sh
and set a RUN_IN_ISOLATION flag if it was specified.
This reduces the overall code a bit plus avoids having to
pass the "iso" parameter to nvmftestinit and nvmftestfini.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idbbe27bfb7b62857500176cdb5d90e381fce4ffc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454814
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test does resets which the nvme driver doesn't
really support yet for fabrics controllers. Some
recent patches accidentally broke resets for PCIe
controllers, and fixing that causes this test to
hang on fabrics controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5676130087a49555645b077f289bb40f6f27a43
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This tests a variety of bdev-related commands against
our NVMe-oF target. The key ones are write_zeroes
and nvme_passthrough which until now weren't being
tested at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8a5cfb2e41c2a7e8fd940b61b43a80c39993f9a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
We use python3 now, not python. This is important
because in next patch we will use a new 'aliases'
keyword argument in the argparse API that's only
available in Python 3.
While here, clean up some documentation that was
instructing users to call python explicitly instead
of just invoking scripts/rpc.py directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c11e131cd56f7c994aa8fe21b4b00ae33489fdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This reduces the number of directories significantly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2bb428962e1666bd3cee20fb566c7eb81195363a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) nmic is a target test - move it out of the host
section
2) don't reset trap until after all tests have run
3) while here, move all of the target-related test
together, followed by the host tests
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I73b3c0a8ace0ad65311ab7bb29b6cb08188e3aba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This should cover all of the cases that we want to
changes for now - where it was doing an unnecessarily
loop over just one malloc bdev.
A few cases remain, but I'm planning to strengthen
those tests with more bdevs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I16f9e82b4a551bcf1f491fc506e11c0ee98b60d9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We only create one namespace, so this can be simpler. We
can also just specify the name of the malloc bdev explicitly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I04141cb8013605f9c54777147852a53d22ae68cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently bdevperf isn't specifying a core mask, meaning it
will conflict with the nvmf_tgt running on cores 0-3. So
specify a core mask, and actually a different one for each
test. An upcoming patch will then run these bdevperf
instances in parallel to speed up execution.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70cf4321d3005dda0ff63a96cef226b0329f778e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We need to wait for the aer application to be ready
to handle an AER completion - so instead of blindly
waiting for 5 seconds, instead wait for the aer
application to touch a file indicating it's ready
to receive an AER event. On my system, this took about
1 second.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic18fabb5ba637ef1f4097930423f897c76bba299
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452806
Reviewed-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
get_lvs_free_mb only takes a UUID argument, not
a friendly name. So revert that part of the changes
to this script made previously.
Also fix ordering of nested lvolstore and lvol names.
This fixes last night's nightly test failures for
nvmf.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I408ed787b6ff43314dd432c9fa7d9f5882c3d071
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453007
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This leverages a new feature in rpc.py for piping a
large number of commands at once. This will cut down
the amount of time it takes to run the affected tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieddf5dcc9cb6132dff96c90db4ed97e67c328f56
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We don't need to use the UUIDs for lvolstores and
lvols in the nightly test - just use the names that
we've specified.
Also remove the bdev loops - there's only one namespace
per subsystem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I684b72ca4472009dd8bc49f5221a7937769f1ab8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We only create one namespace so there's no need for
a loop.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7b37792e5ea0ee7d48853ca05882d566dd6ac5e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently it blindly waits 5 seconds to make sure bdevperf
has started I/O - and it does this for two different tests.
Improve that by using the get_bdevs_iostat RPC to check when
I/O start occurring.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If7bc773ab65d23f69524d3a42123be090f3b4eac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Simplify the test to only run on the RAID volume, but then
also perform several operations on the logical volume while
I/O is occurring in the background. This would have caught
several recently filed bugs.
Change-Id: If937a118ea034ce08d95b70fe74dc5f445cb1008
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test is causing intermittent failures on the test pool.
Change-Id: I6be745700ee34813d49800acf689dc35d6c88ef4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451998
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were setting this value in the target from our initiator, but it
turns out the rdma_conn_params struct is responsible for setting the
opposite side so we need to add it in the target side when accepting
connections.
Also, add a test to demonstrate target functionality when we overwhelm
the SRQ. It is useful to note that performance really tanks when you
start overwhelming the srq so it may be useful to use this test case to
check performance gains in edge cases over time.
Change-Id: Iac541bd9fc1d82eca9f21e7abc3f625663a6c460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to test a greater number of connections without
having to add more subsystems when doing NVMe-oF testing.
Change-Id: I33203d6db79b30abb065f098c16840096478c5de
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451677
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
FIO is going to always present a contiguous buffer to us. But we can
fake out the nvme driver with a couple of global variables.
Change-Id: I038e70582043e1d7c1800ed065fe126aa091c290
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
scripts/fio.py and test/nvmf/fio/nvmf_fio.py are almost exact
same script. This commit unifies two files into one.
Change-Id: If753baaeb9f92dad2cda27bb4bed78ade4827d0b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is third party code which no need to run with asan enabled.
Change-Id: Id6f20f5e280e2b2ef67f83bac710133271d84aa8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448597
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After the last two patches, I was able to verify that this doesn't fail
with Soft-RoCE on kernel 4.19.13
Also while here, make the output less verbose.
Change-Id: I051e62088db2995e55e07201b91e1dd286ecd22e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This automates the process of probing some RDMA capable Chelsio NICs
Change-Id: I1ef52ffd899d4cbd1ace65037c8acf0be099adae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the option to test with intel X722 NICs
Change-Id: Icb439e43768eb397dac881c6cb6979b3426fa62e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it so we only have to check one variable when determining if
we want to load Soft-RoCE NICs.
Change-Id: I5ba615e26252041023ec8615a00c1777bee6cb12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps us simplify the detection of Mellanox NICS and paves the way
for a more modular detection scheme for PCIe connected NICs.
Change-Id: I93f16f469c569977c43d6e20fd4616299fa8c723
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446965
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test consecutively fails for at least couple of days.
Test fails with:
"Failed to write to /dev/nvme-fabrics: Cannot allocate memory"
coming from kernel module.
Change-Id: Idba1bbb3fb63df8a1fb460752ee9cb5780d89860
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are doing away with using the stub application as
much as possible, so let's just remove references to it
where we can.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I52802474f1aaaf100c1b929f4e3ac555532a8410
Reviewed-on: https://review.gerrithub.io/c/444305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvme-cli in NVMf tests currently fails to initialize
the NVMe driver and exits straight away [1]. It expects
the primary process to initialize the driver first, but
since the primary process doesn't operate on any NVMe
devices, it doesn't initialize the driver at all.
Fix this by running nvme-cli without multi-process mode.
In NVMf tests, nvme-cli is only used to discover, connect
and disconnect from an SPDK NVMf target. It does not need
to access any shared memory resources.
This wasn't an issue before, because we used an outdated
DPDK version for nvme-cli which didn't detect any other
shared memory processes of SPDK.
[1] nvme.c: 337:nvme_driver_init: *ERROR*: primary process
is not started yet
Change-Id: Id56f94c6655049e87ab9d93ee38853faf40a11e5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The error message in the chandler pool is:
bdev.c:1127:_spdk_bdev_finish_unregister_bdevs_iter: *ERROR*: Unregistering claimed bdev 'Malloc2'!
bdev.c:1127:_spdk_bdev_finish_unregister_bdevs_iter: *ERROR*: Unregistering claimed bdev 'raid0'!
And this patch can fix this.
Change-Id: I8a247344aa09b62a7395a5513631e7bef6cf0d32
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
