SPDK poller function will return the different value for
the different status. Update the QoS poller for this change.
Change-Id: Ia384bf00a23713df663c317b1997ead441c5adcb
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/428573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1.nvmf: change the return type of calloc failed to -ENOMEM and
keep consistency in this file.
2.thread: revise rc condition to ( rc!= 0),to deal with
all abnormal return.
Change-Id: I7cccb548f30448eaa1bac1a5904c3edcad9c1208
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/431459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current behaviour will match anything that contain address. Change this
to match whole address only.
Change-Id: I6343fb91ed624cba41adbc33d711fb48c2f167a1
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/431530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Especially for rxe. We're not waiting for the queue pairs to get
cleaned up after disconnect, so this test fails due to running
out of qpairs sometimes.
Change-Id: Ib99133776d02743782ef1631e3880e4e6997c1b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/431372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
We were previously doing lots of checks in debug mode
to verify the validity of this field. Now we understand
how it works, so these checks are never going to hit
and are just making the code harder to read.
Change-Id: Ic82d479ae34a8c7db06db62aee1cdf6e8bec126e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430866
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
When we thought we could do error recovery we differentiated between
inactive and erro states. However, that's not possible so collapse
them back into one.
Change-Id: I57622c400378f2d4c518efbc12fb52e665a9ba4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The specification states that opcode is not valid when the status
is not success. Instead, keep track of the operation type ourselves.
Change-Id: I60af4b35e761c46f5f296a61cedfca198836197f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Co-authored-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/430865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
After some lengthy discussions with the RDMA experts, the only
way forward on an RDMA qp error is to disconnect it. The initiator
can create a new qp if it wants to later on.
Remove all of the error recovery code and disconnect the qp
any time an error is encountered.
Change-Id: I11e1df5aaeb8592a47ca01529cfd6a069828bd7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let's just make them consistent and all with a
bdev_* format.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3dec7f4be2ecc765b4aa095e6b675f13d326063
Reviewed-on: https://review.gerrithub.io/429289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Currently only the iscsi => scsi dependency is defined to
demonstrate how the framework behaves.
Eventually, lib/Makefile will be populated with more lines
of the form:
DEPDIRS-iscsi : scsi log conf event
This line will ensure that the iscsi subdirectory is built
after the specified dependency directories.
Then the lib/iscsi/Makefile also defines:
DEP_LIBNAMES = scsi log conf event
This line adds dependencies from the iscsi.so to the specified
libraries.
Ideally we could avoid this duplication by passing the DEPDIRS
value to the lower level Makefile, but that breaks down when we
start considering event/subsystems/* libraries. So for now we'll
need to duplicate it. Incidentally, DPDK also duplicates the
dependency information like this.
While here, remove use of $(MAKESUBDIRFLAGS) in spdk.subdirs.mk -
it was no longer used anywhere in the tree.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If63cbc10ffa18ac6361e4210bd6196ffe88bec43
Reviewed-on: https://review.gerrithub.io/429287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2ca1364cce390c9010a3797bb604aee49de8c990
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/429957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Put the core operation into the loop without using the found flag.
Change-Id: I6509988f11a87e7a7f0ffbad46a090837ee9de20
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430512
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The condition that both raid_bdev and raid_bdev->base_bdev_info[i].bdev
are not NULL is already verified by matching it with base_bdev.
This is a preparation to the further refactoring in the next patch.
Change-Id: I273a31c2ff2f79caf52b59938eee547129768abe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Remove the duplicated operation and reorder configure() to initialize
the raid_bdev and then the bdev.
Change-Id: Ic39da1936b0755e6acd1ae62bd55a241b77f7056
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, add error message if an invalid timeout action value is found.
Change-Id: I09acec39680a640ea9bc2d7a819e4b1887ed622d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/429874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
When the NVMe namespace is formatted with PI enabled, PRACT value
is set to the bit 0 unexpectedly and cause the following error.
nvme_ns_cmd.c: 447:_nvme_ns_cmd_rw: *ERROR*: io_flags 0x1 bottom 16 bits is not empty
Change-Id: Ib99c7a974c6a224d4e702b54b654136f10291b18
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The crypto drivers are now always initialized at
bdev module init, so any subsequent attempts to
init them would immediately return with rc = 0.
Besides, from the code perspective, this call does
not have the proper error handling. To clean up
all of this, we remove the call entirely.
Change-Id: I8e4f5a314b8c5e83a50c668d6c8953a95d6832cc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/430678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
702 case are listed in NIGHTLY test and run PASS,
but it not listed in lvol.sh' usage().
It's easy to be confusing.Where is 702 case?
Change-Id: Iad376112510b277e8747798dde5ef0f12b42c2ec
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/430905
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Code movement only. No other changes.
Change-Id: I04cf179ecd57154172a9369926cbeaaa37e11a52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This event only occurs when using shared receive queues, which
the target does not currently support.
Change-Id: If155843610cf0e961b9783d4afd64b969b4316f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactor the printout of autorun-spdk.conf and fix the path for
pkgdep.sh (the previous path was based on an old assumption)
Change-Id: Id95e0f80f835dd1b055a94a6bfdbffcce029b8af
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In early development of crypto we built the lirbary using
dpdkbuild/Makefile but later due to a DPDK change we needed
to move to a newer version of the ipsec library that is now
built and installed in pkgdep.sh btu we never removed it
from the makefile.
This patch removes the extra building of the ipsec module.
Change-Id: I367618440074d952ff13c6e2098fc3a572cc785e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/429519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I7dfd9ab4826583c6287b0270ecb919d59722c371
Reviewed-on: https://review.gerrithub.io/428007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch introduces script that may be used for
sending RPC commands from remote machine. This script
requires remote user to authenticate with user name
and password set at launch time.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I4ef7c870f3ea760c44da63ba4c16954aa54d4473
Reviewed-on: https://review.gerrithub.io/426531
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9c01bfc05417f07b9265692a02b6aaba37c507f2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/431529
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no guarantee that the first io_channel created for
a LUN will be the last one destroyed. So we need to attach
the poller to the LUN, not the io_channel.
While here, and related to this patch, remove the assert()
that the last channel destroyed must be on the LUN's
master thread. This assertion simply isn't true.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3e0dfddde2de70caec479bf1b6703f01c9d7b3a2
Reviewed-on: https://review.gerrithub.io/431375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
