This RPC lists all PCI devices attached to an SPDK application. Each
device is identified by a BDF and contains a buffer with a copy of its
config space.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I852f421fde105d975458f8e63b8da4f92ed2c69b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This function serializes a buffer as a hex string.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I09ab93bc626f6f6543b7c1ef033bcf807050862a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10651
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
These APIs are not safe, since they do not hold the
pci device lock across calls, which can cause problems
if a device is inserted or removed while handles
returned by these APIs are being used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01a80f26d0a0ca4cdfc7181359932b38da8dd43a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10659
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is a safer alternative to spdk_pci_get_first/next_device,
since those APIs do not hold the lock between calls.
Future patches will remove those APIs, and change callers to
use this new API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71c7e8c1feb9112da8be32a8056b30e105e30463
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10655
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If a subsystem has no listeners, then there is no need
to update the discovery log when adding a host, or setting
a subsystem to allow all hosts.
This eliminates some unnecessary discovery log update
notifications, especially when setting 'allow any hosts'
on a subsystem immediately after it is created (and before
it has any listeners).
Update unit test to check the adding a host to a
subsystem without listeners does not rev the genctr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63dab5df564269e574bb925890088f52063aa378
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The discovery log isn't updated when a subsystem is created
or deleted, it's only updated when a listener for a
subsystem is added or removed.
So remove the nvmf_update_discovery_log() in the subsystem
create and delete paths. They just generate extra AER
completions that potentially cause the host to do unneeded
work.
Note that if a subsystem is deleted with active listeners,
the subsystem delete path will remove each of the listeners
before deleting the subsystem itself. So the discovery log
will still get updated when those listeners are removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id01bbfa3b24d3e1279a614a2fd60be41387a03b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
btrfs.tools v5.15.1 in Fedora 35 complains about target
device being too small to create a filesystem.
Let's increase the bdev size to this test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iedf59328b91516693c88af8c5d47dde849394337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10614
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update scripts with Fedora 35 and remove older
versions which we no longer use.
Change-Id: I54d9f3bcf76065f3e4e3094411d77153c351afc9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The NVMe bdev module enables asynchronous IO QP creation by default, after
calling `spdk_nvme_ctrlr_alloc_io_qpair` and `spdk_nvme_ctrlr_connect_io_qpair`,
the queue pair is in connecting state at the beginning, then users may call
`spdk_nvme_ctrlr_free_io_qpair` immediately, and the common layer will
change queue state to NVME_QPAIR_DISCONNECTING and NVME_QPAIR_DESTROYING,
so in function `nvme_pcie_ctrlr_delete_io_qpair` the workaround to wait
for create cq/sq callbacks will not be called, instead of using the common
layer queue state here, we should use the internal `pcie_state`.
Fix#2245.
Change-Id: I801caf26563464b135035bf7fa2f63def13de9f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10445
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Batching will be made available for DSA specifically through the new
idxd_perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic51d9ad3692074805b1ffa705cea8be35737c778
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9846
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's being added to the low level library perf tool which makes
more sense as the accel_fw provides queueing thus allowing any
queue depth. When using the low level lib you are limited to
a small number reported by HW unless you use batching then you
can get quite a bit more.
Future patches will remove batch from the accel_fw, this is just
the accel_perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3775b9ecdf353f730c7f3e2c06bb45a8873e61f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9845
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As we known, there's a bug in argparser, which puts
required descriptions in optional list.
There are many such descriptions, if not to break a
lot of existing scripts, just adding a notice description
behind required item.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I3d8d2db96dc947d8342cc4e04ce3914da64be146
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We set cb_ctx to NULL when calling spdk_nvme_probe_async(). It looks
that nvme_probe_ctx has not been used anywhere for a long time.
nvme_probe_ctx is not public data structure.
Remove nvme_probe_ctx to simplify the code and make the following
patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7dd5f970a7fde1c9c189fae3c8f28f84d7aed991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This refactoring will be helpful for the following patches to unify ctrlr
reset and failover and failover trid also when reconnecting ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4623a5dd310ac7516c270ccd3b0541c27cc880d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The failover_in_progress flag is used to decide the return value of
bdev_nvme_failover().
bdev_nvme_delete() calls bdev_nvme_failover() with remove=true to remove
nvme_ctrlr->active_path_id. However bdev_nvme_failover() returns zero
if nvme_ctrlr->failover_in_progress is true. bdev_nvme_failover() may
return zero even if it does not remove nvme_ctrlr->active_path_id.
The following will be better.
bdev_nvme_failover() returns -EBUSY if nvme_ctrlr->resetting is true,
and the caller repeats calling bdev_nvme_failover() until the target trid
becomes alternative path or bdev_nvme_failover() returns zero.
To do that, the failover_in_progress flag is not necessary any more.
Removing the failover_in_progress will also simplify the following
patches to unify ctrlr reset and failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ab944beb1d06ea4def144c81c69705860de35f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Checking if nvme_ctrlr can be unregistered is not so simple and
a few changes will be added. So factoring out the check into a
helper function will be valuable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I310c7e3ad2dae9583df4db575d342c2cb111f3f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10461
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a I/O or admin passthrough failed, if the corresponding nvme_ctrlr
is not available, we should failover to another path.
When no path was found, if there is at least one nvme_ctrlr which is
not failed, we should wait until it is recovered.
We should improve error recovery not only for multipath (multipath is
"multipath") but also for failover (multipath is omitted or "failover").
To do this easily, clarify the conditions of availability and failure of
nvme_ctrlr and realize them by helper functions.
Use new helper functions for other cases to improve readability too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I716731f72811d2ec4dfc91f9eadb191d75739af6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10381
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We had not checked the bit 0 of the Namespace Multipath I/O and
Namespace Sharing Capabilities (NMIC) field in the Identify Namespace
data structure.
If the bit 0 of the NMIC is zero, it is likely that namespaces are not
identical.
We should check if the value of the NMIC first, and do it in this patch.
Additionally, it is not usual if the bit 0 of the CMIC and the bit 0 of
the NMIC do not match. So in unit tests rename the parameter multi_ctrlr
by multipath for ut_attach_ctrlr() and use it for the value of the NMIC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6aa7cbcc99be2507dbf18930f7b585a9ea7d0f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10380
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_reset() deletes all qpairs, reset a ctrlr, and then create
all qpairs. Any qpair may fail to be created, and then the reset
request may fail. However, already created qpairs were left.
Let's delete the already created qpairs and then fail the reset request.
This will make us easier to control reconnect, deley reconnect by
a few seconds, or stop reconnect after repeated failures and then
delete ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I414e2281b4bf0cbd1cf461d8fc64a22f43d26d13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace the spdk_nvme_ctrlr_reset_async() and spdk_nvme_reset_poll_async()
calls by the spdk_nvme_ctrlr_disconnect(), spdk_nvme_ctrlr_reconnect_async(),
and spdk_nvme_ctrlr_reconnect_poll_async() calls in a reset ctrlr
sequence.
spdk_nvme_ctrlr_disconnect() can fail if ctrlr is already resetting or
removed. But both cases are not possible. reset is controlled and the callback
to the hot remove is called when the ctrlr is hot removed. So we assume
spdk_nvme_ctrlr_disconnect() always succeed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1299e198597b2a2110f80b9a868e2dae015682ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10092
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will support two features, delayed reconnect and
delete after multiple failures of reconnect to improve error recovery.
The recently added two APIs, spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async(), were not good enough.
spdk_nvme_ctrlr_reset_ctx was not necessary. It had only a pointer to ctrlr.
Using a pointer to ctrlr directly saves us from undesirable malloc error
processing.
Separate spdk_nvme_ctrlr_reset_async() into spdk_nvme_ctrlr_disconnect()
and spdk_nvme_ctrlr_reconnect_async(). spdk_nvme_ctrlr_disconnect()
disconnects ctrlr including disconnecting adminq.
spdk_nvme_ctrlr_reconnect_async() moves the ctrlr state to INIT.
Then rename spdk_nvme_ctrlr_reset_poll_async() by
spdk_nvme_ctrlr_reconnect_poll_async().
Finally deprecate spdk_nvme_ctrlr_reset_async() and
spdk_nvme_ctrlr_reset_poll_async().
The following patches will change the NVMe bdev module to use these new APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1d6858dcdc5fc2e9db0a6ebf3f79cab4f9bbcb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10091
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Future patches will remove some of the more complex conditions
between different configure flags. As a result duplicate entries
might be present in DPDK_LIB_LIST.
Just for tidiness of the DPDK linker args, the DPDK_LIB_LIST_SORTED
is added. Using sort function removes duplicate entries in the list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I318fd0cebbd30a80d281175b7d48bb3249abb841
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
This library was never used, remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5d0255f4b9ddbe98b349b4253f87e5332fe7057f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK supports only maintained LTS versions of DPDK.
For SPDK 22.01 this means DPDK 20.11 and 21.11.
This patch removes paths for earlier versions of DPDK.
There is no need to check if library is present for the following:
- rte_telemetry was added as rte_eal dependency in DPDK 20.05
- rte_kvargs was added as rte_eal dependency in DPDK 18.08
- rte_pmd_aesni_mb, rte_pmd_isal, rte_pmd_qat were removed in DPDK 20.11
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I30c4cdb0fe0634db50bc34d7d6c232806ff49960
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this time raid5 bdev does not depend on rte_hash in any way.
Meanwhile NVMe-oF Fibre Channel transport does.
This patch reflects that in the mk file for env_dpdk.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2ba3e016337866f80fc7a6043cef87bf33cf2373
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since DPDK 21.05 -Denable_drivers option is present,
which only enables selected drivers in DPDK.
As name would suggest it is exact oposite of -Ddisable_drivers.
When building DPDK submodule all unused drivers were disabled
anyway.
Simplify this process by using the new option.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic8ac84b1d6dc88dd7c0b8c4aca391f31bfc93404
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK tests were usualy disabled in the DPDK submodule,
as part of skipping dpdk/app directory.
Since DPDK 18.02 -Dtests=false option was added to
skip building tests in dpdk/app/test.
This reduces the overall time taken to build DPDK from
submodule without introducing new changes to DPDK.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I425976fa38e09c140e517cccd8aeedd64c67b06c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
check_format.sh requires the following, none of which
are supported by default on MacOS and require alternative
homebrew installation for GNU variants:
* mapfile command not supported by bash
* -f option for readlink
* -P option for grep
Note that SPDK is not supported on MacOS, the changes
here are added only for developer convenience.
Fixes issue #2255.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3d4ed49d9bfb4be50a8dd090a34090037f592c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also consolidate Log Page Offset test cases together into a
new test function.
Change-Id: I0f9d25f1f5c3aa2238caf5766a9084bd561aefd1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1a2fa8e818835889999fd615e8c192ffe2ef735d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
With more test cases added, we may not know exactly how many
tests cases are covered by the compliance test tool, so here
we use `Command Type` + `Command` + `Test Case` as the function
name of each test case.
Change-Id: I9d1f90c2463d15657133043fdf70d8124ef3fd87
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The nvmf library will use INTEL VID/SSVID/IEEE values by default,
each transport can overwrite them if needed.
Change-Id: I9dad521c4d080b6f0cc1aaeb4b5d5f6863c6846d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also we don't treat exceptions when getting INTEL log pages
as a fatal error, the initialization will still contine.
Change-Id: Ic2fd2be510fde2679c1546482934d0a180266936
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our tests, especially those which use nvme block devices for various
use-cases, won't be able to perform successful IO on such devices.
The idea is to skip them for now and introduce basic, dedicated,
tests for zoned nvmes in oncoming patches.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I67baad5c85c662921e3327f2101180283c89e96c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9181
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This also translates into switching fully to upstream QEMU for the
vagrant setup.
This is done in order to move away from OCSSD and SPDK's qemu fork
and align with what upstream QEMU supports. Main changes touch the
way how nvme namespaces are configured. With >= 5.2.0 it's possible
now to configure multiple namespace under single nvme device. Each
namespace requires a separate disk image to work with. This:
-b foo.img,nvme,1...
-b foo.img
-b foo.img,,..
Will still configure nvme controller with a single namespace attached
to foo.img.
This:
-b foo.img,,foo-ns1.img:foo-ns2.img
Will configure nvme controller with three namespaces.
Configuring nvme controller with no namespaces is possible via:
-b none ...
Note that this still allows to define other options specific to nvme
controller, like CMB and PMR. E.g:
-b none,nvme,,true
This will create nvme controller with no namespaces but with CMB
enabled.
It's possible now to also request for given controller to be zoned.
Currently if requsted, all namespaces under the target controller
will be zoned with no limit set as to max open|active zones.
All nvme devices have block size fixed to 4KB to imititate behavior
of the SPDK's qemu fork.
Compatibility with spdk-5.0.0 fork is preserved in context of setting
up namespaces so this:
-b foo.img,nvme,2
is valid as long as the emulator is set to that of spdk-5.0.0's.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5d53cb5c330c1f84b57e0bf877ea0e2d0312ddd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When NVMe passthru command (IO or admin) fails on submission (e.g. it
is not supported), set DNR bit in completion status field. There is no
sense in retrying the command in this case.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I55960c128bd9fc31f6defef0b9832259a71684b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8578
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
