The definition is that:
max active zones >= max open zones.
The REAME.md incorrectly writes max active twice.
Fix this typo in the README.md.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4b7d24d7bd1efcbe1608d3ee04d8900f83857f5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7912
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Implement support for the recently added fio .get_max_open_zones callback.
If our ioengine does not implement this callback, fio will always result
in an error when using --zonemode=zbd, on platforms which does not have a
fio oslib implementation for this callback, e.g. FreeBSD.
On Linux, fio will by default try to parse sysfs, which will of course not
work on SPDK.
Implement this callback so that our ioengine will be able to provide fio
with the proper max open zones limit.
This will ensure that fio will be able to fetch the proper max open zones
limit, regardless of OS.
While our SPDK nvme ioengine did overwrite the max_open_zones option if it
was set to zero, this is a bit of a hack. The new fio callback is the
proper way to inform fio about the max open zones limit, so that fio itself
can have access to the actual device limit.
(Just overwriting the requested max_open_zones option will not allow fio
to know if the requested max_open_zones option exceeds the device limit.)
Remove the SPDK specific hack and update our README.md accordingly.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I532a0fa065b9e215ee6229b9100135e5403f198e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Move get_fio_qpair() out of ifdef and reuse it in spdk_fio_queue(),
since the code is next to identical.
The only difference is that get_fio_qpair() returns NULL if qpair->ns
is not set.
Since we know that get_fio_qpair() returns NULL if qpair>ns is not set,
we can also remove the equivalent check in spdk_fio_queue().
Also use ns pointer instead of qpair->ns pointer in two other places
in spdk_fio_queue().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ie647a814ff0b7a6f2bb81cbc9d7e95537fbe5256
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement support for the recently added fio .get_max_open_zones callback.
If our ioengine does not implement this callback, fio will always result
in an error when using --zonemode=zbd, on platforms which does not have a
fio oslib implementation for this callback, e.g. FreeBSD.
On Linux, fio will by default try to parse sysfs, which will of course not
work on SPDK.
Implement this callback so that our ioengine will be able to provide fio
with the proper max open zones limit.
This will ensure that fio will be able to fetch the proper max open zones
limit, regardless of OS.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia9c281290e11e4204d270ba4090edb73212ce20f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7896
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
zipf is a power law probability distribution. When
applied to performance testing of block devices, it
will select blocks over the full range of LBAs, but
will more frequently select lower-numbered LBAs.
The theta parameter governs the distribution - higher
values of theta will concentrate the distribution on
a smaller number of LBAs.
Note that fio supports zipf, so adding it to SPDK
will enable our perf tools (bdevperf, nvme-perf) to
provide similar functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df129c9d61996a2070188c6cd9f1fde631ac208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We cannot solely rely on the qpair_ctx->count reaching
0, because qpairs that are in process of being
disconnected will immediately invoke the qpair
disconnect cb.
Instead, we need to wait until the poll group
no longer has any qpairs remaining on the subsystem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I977747d367d14a4bf60f66a1147b3d75679e5179
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7870
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
When running scheduler/interrupt.sh, the core_freq displayed from
refresh_cores_tab() and show_core() mismatch for lcore 1. We should
get core_freq from cores[] array which has been qsort.
Change-Id: I4eba9b023cfa00700ab82c679d42fff22b85be46
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to add two rpc calls:
bdev_rbd_register_cluster
bdev_rbd_unregister_cluster
Then in the next patch, rbd bdev constructed on the same cluster object
can share the common Rados_t structure in order to remove the thread creation
overhead and improve the scalability.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I898cc4ffabb8e6721ba5bef099cbf948c64d2c98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7551
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Copy Free BSD's sys/sys/tree.h to SPDK's include/spdk/tree.h by
changing as little as possible.
A few changes are as follows:
- Remove a few lines located at the head of the file.
- Change the name of ifdef from _SYS_TREE_H_ to SPDK_TREE_H.
- Change the type __uintptr_t to uintptr_t.
- Change the attribute __unused to __attribute__((unused))
- Insert a space to the front and the end of CONSTCOND.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I26488d8fd61f80508cf7d96fbeb6007f12080a01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When we introduce RB tree, getting the closest timed poller is not
O(1) but O(log N). To mitigate such delay, cache the closest timed
poller into thread, and update the cache when its content is changed.
Add unit test cases for this change. They will also clarify the current
behavior of spdk_poller_unregister() and spdk_poller_pause() for
timed pollers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb98a54c261859a3210034038d3953e5c93ef8aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Current `test -f` never succeeds, because `/dev/cpu/0/msr` is a
character device file.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iaa28f04866ab24140668ad43351a37f0ccccef65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Requests that still reside on retry queue should be
submitted to disk before shutdown.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: Id2d020fcaef6443d01cfd8628686e9b0f34a1cfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch reduces admount of changes in the next patch,
no functional changes added.
The next patch will add usage of contig IO buffers for
multi SGL payload. To support it we need to pass an
offset to fill_wr_sgl function. Also in the current
version we assume that for 1 iteration we fill 1 IO
buffer, the next patch will change it and we'll need
to swtich to the next IO buffer in special case. That
can't be done easily if we use fill_wr_sge function
Change-Id: Iee8209634637697f700f8fa9fe61ead156b6d622
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7258
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The header is small enough that it likely won't ever make sense
to offload the digest computation.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib6baa201a76d769d978f498f5c65985d5ab06ffd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7766
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The bdev layer can do the unmap split now based on the backend
device. For now we only use 1 unmap descriptor, the bdev layer
can help us to do the split.
Fix issue #1888
Change-Id: Iaf740bafd4f2bb4b108133fee2aafd2f53da9b2b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7519
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also free scsi_task data structure for the asynchronous
libiscsi APIs.
Change-Id: I0bff706bfb795e51a4b10c357913ae66493dca5d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is an error when collecting the cpu usage data in perf.c.
The cpu busy data exceeds 100% when running perf tool with mutli-cores.
Signed-off-by: Jaylyn Ren <jaylyn.ren@arm.com>
Change-Id: I9a00f86a51fb52e115c37199aee6f849b235d868
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
process_core() indicates error where any core files are found. If
that happens to be the case when the trap is called, the remaining
pieces won't be executed due to errexit being enabled. With that
in mind, simply ignore process_core's exit status.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I83527468bd1b41bf92b9ee8189a4c425be914552
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6990
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If no ioat devices are registered, we should return.
Change-Id: I03435946716ef653b230515da32e8ccbdf5a188a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7834
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The coredump info can be viewed in
https://github.com/spdk/spdk/issues/1935
We face this issue because no idxd device is attached, but we
still register the hw engine by spdk_accel_hw_engine_register
in accel_engine_idxd_init.
Fixes#1935
Change-Id: I537f06e2b2923faac7f2cd6a28903e77f1f6aaa5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should use `ns->registrants` to count the number of registered
controllers(REGCTL) for Reservation Report command, as `subsystem->ctrlrs`
only list current active sessions(controllers).
Also use the output data buffer directly so that we don't need to calloc/free
during the process of Reservation Report command.
Fix#1928
Change-Id: I650224b751a08416208b8a504b82debff31e92fd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7822
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Some systems may have page size other than 4096 bytes
Change-Id: Id56bb1566fff480edbe1a293121fc7a68c74252a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This is needed before we can start looking up attributes
of the block subsystem under sysfs. In some occasions they
may simply not exist yet at a given time.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4261d17e92e02acec31b8affaccd0aa11c2b851e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7863
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes use of newly added spdk_bdev_wait_for_examine(),
to only respond to RPC when bdev was fully examined.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If82cd913ab6653e8cc0da38c639b384b6c0303ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5482
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Runtime RPCs such as bdev creation has no chance to wait for
bdev examination to finish. To handle this case commit below
introduced bdev_wait_for_examine RPC, and built it into all newly
saved JSON configurations:
(e57bb1af)lib/bdev: build bdev_wait_for_examine into subsystem
Some tests generate the configuration by hand, rather than
saving it from an existing application.
This patch embeds this RPC into the test configs.
Fixes#1760
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I79f998d722a2d19aa98b78333c64dbd2c1151444
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7861
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Function initiator_json_config is never called with
additional arguments that would fill up the subsystem
JSON.
Handling for the comma is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ce5648a0eac29cb0f45d210696edf7977dfe89d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7860
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This makes use of newly added spdk_bdev_wait_for_examine(),
to only respond to RPC when bdev was fully examined.
Fixes#1760
Issue above was triggered in DD tests where application
finished before the examine had a chance to fully finish.
This patch addresses it by making sure that nvme attach
RPC waits for completion of the examine.
Later patch in series adds the bdev_wait_for_examine RPC
to multiple static configuration files. Making sure similar
issues do no occur for bdev modules which do not have changes
in their RPC as here.
The issue does not occur for JSON configs generated from apps,
see patch:
(e57bb1af)lib/bdev: build bdev_wait_for_examine into subsystem
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3ca2933af97a40ae01ecc3eefe2161d2d34c602
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5483
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use spdk_thread_get_last_tsc() and spdk_thread_get_stats() in
unit tests for reactor. As a result, we can change one inclusion
from spdk_internal/thread.h to spdk/thread.h.
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24d4a52ecf885b6e7db749616ee1f95b82574dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f7bdfdd7a7b1b834d16d79638a4fd2d63e9daf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7800
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Most accesses to the struct spdk_poller outside lib/thread have been
done via functions but a few direct accesses remain.
Change these to indirect accesses by addinng a few helper functions
as SPDK internal APIs.
Add spdk_poller_get_name() to get the name of the poller.
Remove spdk_poller_state_str() and add spdk_poller_get_state_str().
Exposing enum spdk_poller_state outside lib/thread is not really
necessary.
This removal requires us to update major SO version.
Add spdk_poller_get_period_ticks() to get the period ticks of the
poller.
Add struct spdk_poller_stats and spdk_poller_get_stats() to get
the stats of the poller.
The next patch will move the definition of struct spdk_poller and
enum spdk_poller_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id597dae074a15fcd8af09fd9d416a22ce2f403c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7798
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is better if the internal of poller or thread is not accessed
outside lib/thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80d488a111fd9a67a0da32d1e63695ce5a6bcb4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7776
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will update the cache to the closest timed
poller when removing it from the list. To do it easier, factor out
the operation to remove a timed poller from timed_pollers list into
a helper function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25016d86117b240a2651d1f06e23bea0342211f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7719
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we introduce red black tree for timed pollers, we will not use
RB_FOREACH_SAFE() but cache the leftmost (smallest) node and iterate
from it via RB_NEXT() instead.
As another preparation, separate TAILQ_FOREACH_SAFE() into TAILQ_FIRST()
and TAILQ_NEXT().
The next patch will cache the first element to thread and refer it
first.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie03c387b5b3a055c668e7b439a5eb05ed77eaa81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7718
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It will be sufficiently reasonable to check if the caller thread is valid
even if spdk_poller_pause() or spdk_poller_resume() does nothing.
Besides, let's write all possibles states explicitly in switch - cases.
This refactoring clarifies the logic and makes the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1163eff388fe741d6b6924f474a82b1aa7d18acb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7665
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change if - else if - else blocks of thread_execute_poller() and
thread_execute_timed_poller() to switch - cases blocks and specify
possible states explicitly in these switch - cases blocks.
The code will be simpler and clarified, and then the following patches
will be easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2e283894f5d69e1bd67466ae070c5b8bb9014616
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7664
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There will be no issue even if time poller is unregistered or paused
after it is expired. The iteration is stopped anyway after the head poller
is found not to be expired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b394b8b517930a6630dd31f59fcaea12eb80572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following patches will introduce red black tree to manage
timed pollers efficiently but it will be based on macros available only
in lib/thread/thread.c. Hence then it will be difficult to expose the
internal of timed pollers tree outside the file. On the other hand,
we do not want to include JSON into the file.
Hence add a few SPDK internal APIs to iterate pollers list transparently.
For spdk_thread_get_next_active/timed/pause_poller(), we omit the parameter
thread and get it internally from poller->thread even if the names include
the term "thread". This will be slightly cleaner.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I000801a2e4dc42fa79801a2fd6f2b06e1b769c88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7717
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add {min,max}_cntlid to spdk_nvmf_subsystem, defaulting to 1 and
0xFFEF, respectively, and add nvmf_subsystem_set_cntlid_range() to
allow the controller range to be configured in the range [min_cntlid,
max_cntlid].
Also add {min,max}_cntlid to the nvmf_create_subsystem RPC to allow
the controller ID range to be specified when creating an nvmf
subsystem.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I936db3bb0c9a38569063a6fd3c11df262dfad776
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7322
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change zone append print to SPDK_DEBUGLOG() instead of an unconditional
print. Since we already print a warning when zone append isn't supported,
there is no need to unconditionally print something for the success case.
This also matches the behavior of the SPDK fio bdev plugin.
Also improve the zone append help text to match the SPDK fio bdev plugin.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic7604ea4bdf17e0cddfe2638f3db7944ee652474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7804
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update README.md with information specific to zoned block devices.
Additionally, add an example config that can be used to test the
--zonemode=zbd fio option using the virtual zoned block device
SPDK module on top of a Malloc bdev.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I68bbc07ab70ad1ce8e38abc91dd8c15c49f90656
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7758
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add support for using zone append commands instead of write command,
for bdevs that support it.
In the SPDK NVMe plugin, the target struct (called spdk_fio_qpair) is
allocated in .setup(), but the qpair is first created in .open_file.
In the SPDK bdev plugin, the target struct (called spdk_fio_target)
is allocated in spdk_fio_bdev_open(). This function also creates the
I/O channel. (spdk_fio_bdev_open() is called by .init().)
Since certain options has to be saved in the struct spdk_fio_target,
which is allocated quite late, we cannot reuse spdk_fio_handle_options(),
which has to be called before threads are created.
Therefore, we unfortunately need another option parsing function in the
SPDK bdev plugin.
If we fail to handle any of the per target options, the target is never
added to the list of targets, and is freed immediately.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Iacd1924c8f0d3d324f2a6f1b0a54f86459f39d31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7727
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
