If NN is very large this saves a lot of memory. This lookup is
not generally used in the I/O path anyway.
Change-Id: I98e190006843ad5d0bac8483bf9feb800d4a665a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9884
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_find_io_path() selects an io_path whose qpair is connected
and ANA state is optimized or non-optimized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79c978795562b606ee27aa43020684d8bcbf50c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset all controllers of a bdev controller sequentially. When resetting
a controller is completed, check if there is next controller, and
start resetting the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I169a84b931c6b03b36bb971d73d5a05caabf8e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7274
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the NVMe bdev module had completed the outstanding reset and
then canceled pending resets. This was complex.
On the other hand, the generic bdev layer cancels pending resets
and then completes the outstanding reset.
Following the generic bdev layer simplifies the code and makes us easier
to control retry reset, delay retry reset by a few seconds, or stop retry
after repeated failures and then delete ctrlr.
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a68422918ebcb052b3a281316ffba9b3450ecd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9816
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Restore the previous nice idea and unify canceling pending resets
into bdev_nvme_complete_pending_resets().
cb_arg of spdk_for_each_channel() was reserved for a different
purpose but it was gone.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c01051ae9d8eccc7fc3ec485dd344ff9f55087b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9815
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The all setters of the reset_cb_fn use boolean as the result eventually.
Using boolean as the result earlier makes the code simpler and the
following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ec4f670ed7a000a824ab7e261bab07a3dc21f43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9814
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_admin_passthru() chooses the first ctrlr which is not failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If41a1d1e1bde4bddfa92e5a385509daa3f0ce4de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_admin_passthrough(), bdev_nvme_reset_io(), and
bdev_nvme_abort() do not use io_path. So simply fall through even
if the optimal io_path is not found for these, and clear the
cached io_path for these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26fcbf99c95bbfb6e825c1b7c6455241c198d92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9675
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even if the NVMe bdev module supports I/O retry, it will not retry reset or abort.
For clarification, bdev_nvme_reset_io() and bdev_nvme_abort() call
bdev_nvme_io_complete() themselves for error cases.
For bdev_nvme_abort(), we do not need to differentiate error processing
among return values. Simply complete the request with failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5d51cbba47c6360a6177efd7d5f2e978c48ee9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even when I/O retry is supported, reset will not be retried. However,
bdev_nvme_io_complete() will process I/O retry. Hence inline
bdev_nvme_io_complete() into bdev_nvme_reset_io_complete() to exclude
reset from I/O retry. The result of reset is success or failure, so omit
the -ENOMEM case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I667e74cbbac4a13cefb6896f898476ba48bcd0fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9687
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Save the io_path to which the current I/O is submitted into struct
nvme_bdev_io to know which io_path caused I/O error, or to reuse it
to avoid repeated traversal.
Besides, add a simple helper function nvme_io_path_is_available() to
check if the io_path can be reused.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idadd3a3188d9b333b335ea79e20a244aa0ce0bdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9296
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We have io_path structure now and returning io_path rather than
ns and qpair match the function name. The following patches will
cache the returned io_path into nvme_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d773da18591fc324667f6b5c489a38f497bf3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the critical limitation that ctrlrs which are
aggregated need to have no namespace. After this patch, we can
add multiple namespaces into a single nvme_bdev.
The conditions that such namespaces satisfy are,
- they are in the same NVM subsystem,
- they are in different ctrlrs,
- they are identical.
Additionally, if we add one or more namespaces to an existing
nvme_bdev and there are active nvme_bdev_channels, the corresponding
I/O paths are added to these nvme_bdev_channels.
Even after this patch, ANA state is not utilized in I/O paths yet.
It will be done in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15db35451e640d4beb99b138a4762243bee0d0f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Pointer 'ctx->req.multipath' returned from call to
function 'strdup' may be NULL. Reported by Klocwork.
Change-Id: Id4a188ec5340f02c9bd0643db0acb03409dd5829
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9843
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It can be much simpler when inlined.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifad89d7b9557a45eee601fc2004066a0fd9289c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Specifying only a transport id is not enough. We need to be able to
describe the host parameters too.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iadbea553aee4b38e7cacab0b486e7e5746d0d1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9825
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the currently active path identifier in a failover scenario. The
path is defined by more than just the transport identifier, so fix the
name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I682c6f4c54f75307e2615bf80e70358180d99fe2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9576
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines a unique path between a host and a target.
Change-Id: Ia3d24c1b34199a8b596aaf17900ca9694a9da77d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9505
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new path must differ in some way.
Change-Id: I98fd2b2cb3220b482efe0a19bfce94ec4e72bec2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9418
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This parameter may have the values "disable" or "failover". The default
is failover to match existing behavior. In the future we expect to
change the default behavior to disable.
Further, we expect to add an "enable" option soon to do full multipath.
Change-Id: Iebbdc9b95f23101f18d64e085933463498e627be
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9343
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We know that the librbd's read/write operations will be handled by a
non spdk thread, so we can get rid of the epoll based group based
polling and directly use the async completion. This makes the code
is simple and easy to maintain.
And we still need to keep the io_device registration for this module,
because the I/Os are async. We need the channel reference on "rbd_if"
in order to know which rbd disks are still active.
Change-Id: I1c140a4b286dbfe113ed2a67bd2875de605e8f24
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9335
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Call rte_cryptodev_close() to free qpair memory instead of using
an internal function.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1bd7f0dd86de83f278f6be3263cdf3fbd8e1c77f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9720
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's no need to keep polling with iscsi_bdev_conn_poll() when the request
list is empty, as new requests already restart the poller when needed.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Iec5553f8c14d32e894989c9f7a448b6817a821b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not providing a lot of value, while being pretty problematic, as
the read is blocking and cannot be easily changed to be non-blocking, as
dump_info_json is a synchronous interface.
Now that dump_info_json isn't using any synchronous interfaces from the
NVMe driver, we can send a bdev_get_bdevs call in the async_init.sh
test to verify that.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ida31c8d1000a52b0782f698afe46b071ed4e41df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch replaces the synchronous `spdk_nvme_detach()` calls with its
asynchronous counterparts in the controller unregister path.
An additional poller is introduced to periodically poll the NVMe driver
for detach completion. Once the detach is completed, the poller is
unregistered and the nvme_ctrlr is destroyed. The poller uses the same
period (1ms) as the async probe poller.
Since reset and detach cannot happen at the same time, reset_poller was
renamed to reset_detach_poller and it can now store the pointer either
to the reset or detach poller, depending on the circumstances.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5eb2dd6383d98d25d1f9748af08c1a13d18acb0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is done in preparation for using the non-blocking versions of the
spdk_nvme_detach API, which will delay controller's delation until the
detach is completed asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia785408c9a94427e60bf239e6036a5e89d589f61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It can match by any provided parameter to remove paths.
Change-Id: I5e7a87342bbb90943dc97fb52f142814fcf0acfa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9453
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Instead of storing an spdk_nvme_transport_id, store the object that
contains it. This will make a few later patches easier.
Change-Id: I36b74889fe39af3b7ab2b900fb3ea4b3f39e1f83
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9484
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Better to put this varable into the bdev_rbd_io structure
instead of on the stack. And we will use this variable in next patch,
when the callback function is completed, so we should not put it on the stack.
Change-Id: I11ff46ef07908084012bc1ce040eceb667334a40
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The purpose is that we will remove the group reaping of
rbd_io later, so we need to know the original thread info of the
rbd_io.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I69f60261447fdac0b0885fdb213e92c246439047
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enable dump of transport stats in functional test.
Update unit tests to support the new statistics
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815aeea7d07bd33a915f19537d60611ba7101361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch enables us to aggrete multiple ctrlrs in the same NVM
subsystem into a single bdev ctrlr to create multipath.
This patch has a critical limitation that ctrlrs which are aggregated
need to have no namespace. Hence any nvme bdev is not created.
However it will be removed in the next patch.
The design is as follows.
A nvme_bdev_ctrlr is created to aggregate multiple nvme_ctrlrs in
the same NVM subsystem. The name of the nvme_ctrlr is changed to be
the name of the nvme_bdev_ctrlr.
NVMe bdev module has both the failover feature and the multipath
feature now. To choose which of failover or multipath to use, add an new
parameter multipath to the RPC bdev_nvme_attach_controller.
When we attach a new trid to the existing nvme_bdev_ctrlr, we use the failover
feature if multipath is false, we use the multipath feature if multipath is
false.
nvme_bdev_ctrlr has a list for nvme_ctrlr and it is guarded by the
global mutex. Callers can query nvme_ctrlrs from a nvme_bdev_ctrlr via
trid as a key. nvme_bdev_ctrlr is not registered as io_device.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20571bf89a65d53a00fb77236ad1b193e88b8153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, if an I/O qpair is disconnected, we tried reconnecting
the qpair. However, this reconnect operation was very likely to fail
and will not match the upcoming asynchronous connect/reconnect
operation. We need an extra callback to make this reconnect operation
asynchronous, but we do not want to have it.
Hence if an I/O qpair is disconnected, we free the I/O qpair and then
reset the corresponding nvme_ctrlr immediately. If the admin qpair is
also disconnected, the nvme_ctrlr is reset immediately. However this
event may never happen. So we do not wait for the error of the admin
qpair.
The NVMf host may disconnect connections by itself intentionally.
In this case, resetting the nvme_ctrlr will surely fail. But resetting
the nvme_ctrlr frees all I/O qpairs of the nvme_ctrlr and these I/O
qpairs are not created again until resetting the nvme_ctrlr succeeds.
Resetting the nvme_ctrlr once at most is more efficient than repeating
reconnecting the I/O qpair. So this change is valuable even for such
intentional disconnection. However, it is helpful to know the event that
I/O qpair is disconnected. Hence change DEBUGLOG to NOTICELOG in the
disconnected callback. The disconnected callback is not repeated, and
we do not need to worry about NOTICELOG flooding.
Refine the unit test case to verify this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I376b749c2f55d010692bf916370e8bb4249b795f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9515
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Poll group has a list of the associated ctrlr channels to update
them when the corresponding I/O qpair is disconnected to do path
failover.
Another idea is that poll group has a list of the associated bdev
channels. However, two or more bdev channels may share a single
ctrlr channel and I/O qpair is per ctrlr channel. What we want to do
by this addition is to stop I/O submission to any failed I/O qpair
and choose alternative I/O qpair. Hence we take the first idea.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia287bd1b803313e66b8505a19694a40133b675f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8124
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously nvme_ctrlr_channel had a pointer to a nvme_ctrlr and used it
throughout. However the use cases are not performance critical and
are better to convert from nvme_ctrlr_channel to nvme_ctrlr by
spdk_io_channel_get_ctx() and spdk_io_channel_get_io_device().
Provide a convenient macro nvme_ctrlr_channel_get_ctrlr() to do it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie22e8c318af88e09b95824c67b3e874d85425f1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_find_admin_path() is used only in a place and it's role
is to find a non-failed ctrlr even after multipath is supported.
Inline it into bdev_nvme_admin_passthru() will be better.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If58507c49b43d047e1f3ef25bbdfb571c36a1956
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9194
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously bdev_nvme_reset() returned -EBUSY if ctrlr is being
destructed and returned -EAGAIN if ctrlr is being reset.
These did not match what spdk_nvme_ctrlr_reset() returned.
Reset operation will be more important than current when multipath
is supported and reset operation is made asynchronous.
Hence change bdev_nvme_reset() to follow spdk_nvme_ctrlr_reset().
bdev_nvme_reset() returns -ENXIO if ctrlr is being destructed and
returns -EBUSY if ctrlr is being reset.
Additionally change the return value of bdev_nvme_failover()
accordingly. After the change bdev_nvme_failover() returns -ENXIO
if being destructed and returns -EBUSY if ctrlr is being reset.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie2c6f8601050b1043d83de9cf01490751784e4e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, include hostid into ctrlr_opts rather than
passing it as a parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d04db1c5767ec76a9a7cd255c3a8d56b0b8f583
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9344
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_ctrlr_populate_namespace_done() needs nvme_ns, probe_ctx, and completion
status.
When multipath is supported, nvme_ctrlr_populate_namespace_done() will
be called from the spdk_for_each_channel() callback. The spdk_for_each_channel()
callback can have one context and one completion status.
Hence nvme_ns or probe_ctx need to have another.
If an nvme_ctrlr has multiple namespaces, a probe_ctx is shared by
multiple nvme_ns.
So let nvme_ns has probe_ctx.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iedaaab80616d34d01935f4ebc31e1f3b84e09e32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9047
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For multipath, when an new nvme_ns is added to an existing nvme_bdev,
we need to add the corresponding qpair to all existing nvme_bdev_channels
dynamically. The RPC bdev_nvme_attach_controller has to return after that.
Hence populating namespace needs to be asynchronous.
On the other hand, when an nvme_ns is removed from an existing nvme_bdev,
we need to remove the corresponding qpair from all existing nvme_bdev_channels
dynamically. Hence depopulating namespace needs to be asynchronous.
By the recent refactoring, two callbacks, nvme_ctrlr_populate_namespace_done()
and nvme_ctrlr_depopulate_namespace_done() were removed accidentally.
We need to restore these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I37ea2420588cef3a18648dec053f8bd2b884e86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9392
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few functions can be made private in bdev_nvme.c. Hence delete
these function declarations from bdev_nvme.h.
Besides, bdev_nvme_remove_trid() is only a function declaration.
Hence delete it together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7bf9ae6da332c6426f6eb40926e7c4130d9acd8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9444
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This only existed to share code between OCSSD and regular NVM
namespaces. Now OCSSD is gone, so just merge the files into bdev_nvme.
Change-Id: Idb73cc05d67144de5dd20af8db24c8f6974d10a7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9337
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_populate_namespaces
Avoid relying on this number. Different targets have interpreted its
meaning in different ways and it cannot be used anymore in practice. It
may also be very, very large.
Change-Id: I94e8eae49d6ccdbd8be302b30a120d89242b6d39
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9316
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
