Initialize ANA state of each namespace to optimized regardless of
whether ANA is supported or not. This will simplify the code to get
the optimal I/O path because we do not have to care if the namespace
supports ANA.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24dfe08674af398671de6528b884e9d82409eeae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7890
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The purpose is to reduce the duplicated code in nvmf and iscsi
layer.
Change-Id: I7e96f0d5bb1ba4b81378addca3cdd929056384e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
We map the SPDK_NVME_TRANSPORT_* values directly to
the NVMe-oF trtype values. Since PCIe isn't
Fabrics, we choose 256 which is outside of the
8-bit trtype range of values.
So we can just check if trtype >= 256 to determine
if the trid is for fabrics or not. This is
preferable to checking PCIE || VFIOUSER in case
additional non-fabrics transport types are added
in the future.
I considered taking a trid as the parameter instead,
but went this route since it is consistent with
the existing spdk_nvme_ctrlr_is_discovery().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib62ff4d30549b2324486c81f2dce67f0f1741e9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Connect the adminq as part of controller initialization
instead of controller construction.
We never actually 'connected' the adminq for
PCIe or vfio-user transports, since its a nop.
But their connect_qpair transport ops function
is also a nop for the adminq, so it's fine to
generically connect the adminq across all transports.
Note that we cannot read registers (cc or csts)
during controller initialization now until after
the adminq has been connected since reading fabrics
registers depends on a connected adminq. This gets
special cased for now, but eventually reading
cc and csts will need to be part of the state machine
itself to make it asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5566d7c549d78d24b94ea253df51e697da6237f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
According to NVMe-oF 1.1 spec, it is not a fatal error.
So according to Figure 126 in NVMe Base specification,
we should return "Transient Transport Error".
Change-Id: I601304ae2bb24508882fb1ec8c7e53ec587ab515
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read CAP (Capabilities) register as part of controller
initialization instead of controller construction.
For now, still read CAP in the pcie and vfio-user
controller construction, since they need the
drstd (doorbell stride) to construct the admin
queue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I000fe880f2ec0d6de1d565c883d7ea0ae1ac2c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8078
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We're going to be adding some new states (READ_CAP
and READ_VS) in future patches, that we want to
come before the current "INIT" state.
So we will simply make "INIT" have the same
value as this new NVME_CTRLR_STATE_CHECK_EN state
for now. That means existing code won't have to
change later once we add new states that come
before CHECK_EN.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07ca92e28ab1cd8d838cdef5c3ff36ba80a224bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8075
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
_reactor_schedule_thread() zeroes out the lw_thread on move.
To properly calculate thread stats since the move,
save them right after reschedule.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44cc3b5907adda35b3117c2dd7268dc813d59853
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_thread keeps track of tsc from its whole lifetime,
those can be requested with spdk_thread_get_stats() at any time.
spdk_lw_thread uses stats from above and keeps track of two points in time:
- current_stats reflecting stats at the time of gather_metrics stage
- last_stats reflecting stats from previous gather_metrics stage
1)
Before this patch current_stats were duplicated in snapshot_stats.
There is no need for that so now they are removed.
2)
Removed _spdk_lw_thread_get_current_stats() since it would be copying
current_stats to current_stats, thus not perform any action.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5e5d4039cd0f7cc10ba150a3d915b90ec96589d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7842
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Whenever an event executes, it might change the currently
set thread or reset it to NULL.
To prevent it from affecting other events, set the current
thread each time an event executes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f1e7f8b7acab25353b4782058e87a9e01aab2c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8045
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_get_thread_load() is function used to determine
the load of a thread based on relation of busy/idle tsc
from previous scheduling period.
In order to avoid division by 0 calculating the percentage,
we can simply exit early determining that thread was not
doing any work.
Having this check here will make sure that no matter
the changes in event framework, scheduler dynamic will work.
Removed the place that updated last_stats if they weren't
yet updated at least once (first scheduling period iteration).
In this case after change to _get_thread_load() will be the same,
as only the latest iteration will be used to calculate thread load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75f0f12f024675f2473a26e30596d6eb28093d46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In struct spdk_nvmf_poll_group_stat, there are statistics of cumulative IO and
admin queue pair counts. But current qpair counts are not reflected. Use
this patch to add current admin and io qpair counts for a poll group.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I7d40aed8b3fb09f9d34e5b5232380d162b97882b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7969
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Eugene Kochetov <evgeniik@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Block device product name is same among same type
of the block devices, while Guest VM may use this
value to generate UUID, so here we change it to
block device name instead.
Change-Id: I58c5fb271a6a436c15520616c2065eee9c37300a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now, vfu_setup_region() must specify the region fd offset (which is always zero
in our case).
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I10795d848a4c73ee9e1e78ea63776074401c4b17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Clean up spdk_bdev_register() to facilitate the upcoming patch which
uses RB tree to speed up bdev name lookup.
* move TAILQ_INSERT from bdev_start() into bdev_init();
* rename bdev_init() to bdev_register() and rename bdev_start_finished()
to bdev_register_finished();
* inline bdev_start() into spdk_bdev_register().
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Idbfc800472bc8c6f9b615046e082772e9f6026e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8043
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
nvmf_get_ana_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
The following patch will fix the same issue for other commands in
nvmf_ctrlr_get_log_page.
Fix#1946
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I495f3be05c82be5cd53609772c655c8924b9179f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Since we will reuse send_pdu for other purpose in the next
patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee5166131b70a25bc13aaa847bfc9066231f31a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
For nvme/tcp connection, we use the synced manner
if the qpair is not fully connected. Thus without
the check, we will stuck here. And this patch
fixes this issue.
Change-Id: I72815bf5b4c0b31c4866bc1b9034b0e42b81d3f1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Loading subsystems and restoring state from a JSON config file is useful
outside of the SPDK application framework, so move it to lib/init.
Change-Id: I7dd3ceace2e7b1b28eef83c91ce6a4eedc85740e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6645
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
I'm not sure whether this should go into lib/init or to lib/rpc
directly, but I've chosen lib/init for now.
This is to support applications that want to run the SPDK JSON
RPC server, but aren't using the SPDK application framework.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I79ca39aa0ca6e1a3a6905b0bf73e6cc99b086e55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6644
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The functions to initialize the SPDK subsystems or tear them down
was previously an internal-only API. Make it public for use by
applications that aren't leverage SPDK's application framework.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2ebfd020e6fa4c1947fa1c1a2ac509ce9b0242f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6643
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
There were some functions in the internal header that can be entirely
private to the init library. Move them over.
Also, remove the support for including the header from a C++ file
because these headers are internal to SPDK which is pure C.
Change-Id: Ic4323b2b8664e70106a57b3ca8acbc7c2efe621d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6642
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The header size is very small, which does not have too much value to
offload such calculation by hardware.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iaa82f39312df7eef3282325a33677ea41ab735ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
open_blobids holds bit array of currently open blobs,
this is a way for quicker determination than iterating
over all blobs. See patch introducing it:
(30ee8137)blob: Add a bitmask for quickly checking which blobs are open
That patch added resizes of this bit array to bs init
and bs recovery path (not shut down cleanly).
But that patch skipped over bs load from a clean shutdown.
This resulted in blob open having multiple blob pointers that
target the same blob id.
Fixes#1937
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3c42a63d168d1f5b013b449f010c5b207936045b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Mellanox Build Bot
Before this patch idle_tsc was sum of all idle tsc of all
threads running on a reactor.
There are cases when no threads are present on the reactor,
and _reactor_run() spins doing nothing.
To give more accurate representation of the reactors state,
the idle_tsc now adds time spent doing idle spinning.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If797b2a03507d17b07367d56d5f6c40cefbbbd49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7900
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Disabling interrupt mode on reactor now updates the tsc_last
to current time. So any further tsc caulations will not account
for the time when reactor was in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56fb8a738eea60ee5de3b49d586f7cb228b54510
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7901
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
tsc_last value is used to update thread stats
during _reactor_run(). See:
spdk_thread_poll(thread, 0, reactor->tsc_last);
If no threads were present on the reactor,
this value got outdated and resulted in
adding time reactor spent with no threads to
stats of the first thread placed on that reactor.
This patch fixes thread stats by making sure
that argument to spdk_thread_poll() is up to date.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0c35fdba1b63b6ee19a5a2b34751090839cb2438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Get all of the hot stuff to the first cache line.
* Shrink the xfer enum to one byte (it only has 3 values).
* Pull out the dif enabled flag form the dif structure so it
can be access separately
* Rearrange the members
Change-Id: Id4a2fe90a49c055a4672642faac0028671ebfae9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
(cd83ea4a)thread: Add SPDK internal APIs spdk_thread_get_first/next_active/timed/paused_poller()
Patch above by mistake iterates over active_pollers list
for function that lists paused pollers.
Fixes#1947
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1b69d942675f34f5f046ec46feacc8d81d89f015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
When blob persist starts, there can already be multiple
of such requests pending. It is possible to complete
a set of persists at once, if blob state after their
execution would be the same. This is the case when
persists are already pending when a particular persist
request is started.
This patch implements such mechanism by introducing
persists_to_complete queue, containing entries that
were previously queued up before starting the current
persist request. If there are any entries in this queue,
further requests are put into pending_persists.
When first request from persists_to_complete is persisted,
completions are issued for all requests on that queue at once.
If at that point there are any new entries on pending_persists,
all of them are put into persists_to_complete. Persist process is started
again with the first request from that queue.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10063e55d6f821b1863de016d3148da6a719a422
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was using reserved field in CRC to store the final address of where
to put the result, this not legal. Move to the completion record
and slightly re-arrange the struct to keep it at 96 bytes.
Refacorted the IO prep function so the caller can udpate both the
descriptor and completion records instead of continuing to add
parameters to the prep function for opcodes that need something
unique in the completion record. This also allowed for a minor
fix where the prep function was returning NULL when vtophys failed
which would have indicated busy as opposed to failire. Now we can
proprely fail that path.
fixes#1929
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic23bc7b68bdd5757c30b7963880677f423368e20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update libvfio-user to the current version, updating the client for the relevant
changes.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic64ace08ac0c7e9676f04f8d1f47a9c0388a2652
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Support ACRE (Advanced Command Retry Enable) feature. Currently set
all crdt to 0 and only select crdt[0] (crd=1) when the IO has any
error.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If7bc30f91f5b2d0839002dead17188a4b3a52d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7885
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
That prevents nvmf target from starting to destroy poll
groups prematurely
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I833f6198ef0e3083fdadf70dd3b62844c905aceb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7881
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch changes the order of IDENTIFY_ACTIVE_NS and CONSTRUCT_NS
controller states. It is required to further improve memory management
for namespaces by allocating memory only for active ones.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie540442b1bd9e897afcbaa4319c139109dd0c515
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous implementation allocated memory just once at the beginning of
active NS list retrieval procedure. It allocated memory for maximum
possible number of active namespaces, i.e. 'cdata.nn'.
This patch changes allocation logic. One page is allocated at the
beginning. If more is needed, reallocation is done with one more
page.
This patch also removes SPDK_MALLOC_DMA flag from allocation since we
don't do RDMA directly into this buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Iaa80c4d70c54daaf71dcbf755c63a01a1d83b772
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the macros for red black tree provided by Free BSD to manage
timed pollers efficiently.
Allow RB_INSERT() to insert elements with duplicated keys by changing
the compare function to return 1 if two keys are equal.
Check the return code of RB_INSERT() because this is the first use case
for RB tree macros in SPDK. We did the same for RB_REMOVE() by
adding another temporary variable but we remove it from this patch
because it is not so important compared with RB_INSERT().
When a timed poller is inserted, update the cache for the closest (leftmost)
timed poller only if the tree was empty before or the closest (leftmost)
timed poller was actually changed. We do not have to use RB_MIN()
because all duplicated entries are inserted on the right side.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe253ca8eecc10116548b5eedbcdba8fb961b88d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7722
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We already hold thehe next closest timed poller in tmp. Inlining
poller_remove_timer() into thread_poll() makes the cache update
more efficient.
After this patch, poller_remove_timer() is called only in a single case
and the case is compiled only on Linux. So add it inside of a temporary
block is much clearner. However it will be used by spdk_poller_reschedule()
in the end of this patch series. So keep
the current position.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2e6858223713eed84f5d70b160da6122edae6d03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7910
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This enable us to optimize the cache update when RB tree is supported.
Call poller_remove_timer() after getting the next element because
as TAILQ_FOREACH_SAFE() and RB_FOREACH_SAFE() do, TAILQ_NEXT() may
not be valid after the current element is removed.
Previously, the patch had called poller_remove_timer() before getting
the next element. However, thanks to the nice testing, this bug was
found.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I18afb4412115dc1696cc568610cbe3dc618c2357
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7909
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This change is a preparation to first dequeue the closest timed poller
always when it is expired. Previously the poller_remove_timer() calls
were not consistent and difficult to follow.
spdk_poller_pause() sets poller to PAUSING even when it in RUNNING
and move it to PAUSED after returning from its context.
If spdk_poller_pause() and spdk_poller_resume() are called while poller
runs, it is moved to WAITING. Hence thread_execute_poller() and
thread_execute_timed_poller() ignore such cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29340613a2ec0c3529d0886f4d81c0a0fdf8745d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This API was removed previously, so remove remaining
references in map file and unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba2f6a5f5ba590d3996dc133c8181083a33d7405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7963
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
