When you run verify on bdev perf, it rejects any user provided core
masks and pins itself to core 0. We were also running the NVMe-oF target
on cores 0-3. Occasionally I was seeing the shutdown tests failing
during the waitforio step. It seemed like the target and bdevperf were
both still online during this failure, so my hypothesis is that the
bdevperf poller was stealing all of the cycles from the NVMe-oF poller
completing I/O so the I/O wasn't completing.
Even if that's not what's happening, it is probably a good idea to split
the NVMe-oF application and bdevperf onto different cores.
Change-Id: Ib3b5b00e639ebd14bd1ed2cfb4b7782076ca364c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462551
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If the log level of the output log is higher than
the process's log level, the system does not output
it, so we needn't generate the formatting logs.
Change-Id: I36be0e6807ed575fcbf1d0ae01f064a6ca2c4539
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462790
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Issue reports:
vbdev_crypto.c:695:12: warning: The left operand of '+' is a garbage value
iv_ptr = rte_crypto_op_ctod_offset(crypto_ops[crypto_index], uint8_t *,
Change-Id: I1a4f89111e94a13d8daf38070aa69306783a83c5
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Original intention most likely was to compare nvme lib to
aio, but since then aio bdev was developed.
There should be no need to keep the support for AIO in
perf example app.
Change-Id: I716f2164b8eaef16db05b4fffa35393c7d916e0b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461593
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During PCI bridge initialization not all
registers was cleaned properly.
Change-Id: Ie0752bb303ba06e2a21669908efd9f746f6b0039
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On Fedora30, GCC9+ reports errors:
Issues report:
vbdev_compress.c:482:17: warning: Assigned value is garbage or undefined
comp_op->m_src = src_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:502:17: warning: Assigned value is garbage or undefined
comp_op->m_dst = dst_mbufs[0];
^ ~~~~~~~~~~~~
vbdev_compress.c:491:3: warning: 1st function call argument is an uninitialized value
rte_pktmbuf_attach_extbuf(dst_mbufs[iov_index],
compress_ut.c:826:2: warning: Attempt to free released memory
free(g_mbuf_mp);
^~~~~~~~~~~~~~~
Should remove free(g_mbuf_mp), for pointer exchange.
Change-Id: I1a48b7c309a4e2aa0aa513f9be44ae3504d9e385
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462574
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
One of the tests required the OC device to have at least 8 parallel
units. It's not really necessary as we can test the same thing on
fewer (4) units.
Change-Id: Ib3ccd7fee0b8ecd2663b12e4aa9aa802ebe238a8
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Code on line 613 should never be reached for last
chunk on the band, since it is checked on line 606.
This assert verifies that, all chunks before last
are not NULL.
Change-Id: I78a9967f91c0873981b3308e888d85fa7c8d6641
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462488
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved the spdk_bdev_io_get_iovec() after the verification that io
succeeded.
Then added return path when iov could not be retrived from bdevio.
Change-Id: I2638e6657fd08a2dd85ab0906383cecef8fb4f4a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Admin can enable user and add user to locking range.
Then the user can lock/unlock his range.
Change-Id: Ifc5a8cf5c6b5febeb59c86333981f0cf5b938500
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we use getpass. But it looks like this
is obsolete, this patch is to fix this.
Change-Id: If3b667cea8e09aab170bfdb75b8d51e6855bb0b0
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are many req leaks when a controller failure
occurs during submitting IO. It must free all of
the children before freeing the parent req.
If a part of the child req has been sent to the back end
and a part of the child req fails, removes the failed req
from the parent req and the parent req must be retained,
freeing the parent req after all of the submitted reqs return.
Change-Id: Ieb5423fd19c9bb0420f154b3cfc17918c2b80748
Signed-off-by: Huiming Xie <xiehuiming@huawei.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Existing children split functions defined in nvme_ns_cmd.c can
also be used in nvme_qpair.c to free children requests with error
paths.
Change-Id: I640b32884424709da67ee89ff780c2de45acc54c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461372
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
move the staement location of TCP request setting and remove
the duplicated code.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia659756185547ff4f8aa26c5bc01f63defe6c113
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Catch exceptions during RPC client initialization
to display meaningful error message.
Withouth this change, user gets stacktrace
when e.g. SPDK application is not running.
Before:
```
Traceback (most recent call last):
File "scripts/rpc/client.py", line 53, in __init__
raise socket.error("Unix socket '%s' does not exist" % addr)
OSError: Unix socket '/var/tmp/spdk.sock' does not exist
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "scripts/spdkcli.py", line 74, in <module>
main()
File "scripts/spdkcli.py", line 47, in main
with rpc.client.JSONRPCClient(args.socket) as client:
File "scripts/rpc/client.py", line 56, in __init__
"Error details: %s" % (addr, ex))
rpc.client.JSONRPCException: Error while connecting to /var/tmp/spdk.sock
Error details: Unix socket '/var/tmp/spdk.sock' does not exist
```
After:
```
Error while connecting to /var/tmp/spdk.sock
Error details: Unix socket '/var/tmp/spdk.sock' does not exist. SPDK not running?
```
Change-Id: I65862965b68acf3bd4709de598f04de49da27de2
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
RPC client constructor accepts optional port,
but does not check if it's None in case of
remote connection.
This patch adds the check and new error message
related to it.
Case where port is unexpectedly None
can be reproduced by starting spdkcli
when SPDK socket does not exist.
Change-Id: I46e0b99547204c6fdeac421e5de9d6991387e207
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We already have send buffer allocated. This will greatly improving code
as we guarantee by design that there is always JSON write context
object.
Change-Id: Id487c01448e1a65d9d4ef76d40a2a9f178b2f570
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459341
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If subsystem bdev module initialize failed, it will call
spdk_bdev_init_complete(-1) -> (subsystem bdev)->fini
_spdk_bdev_finish_unregister_bdevs_iter -> spdk_bdev_module_finish_iter
In abovt path, spdk_bdev_module_finish_iter will repeate to call
bdev_module->module_fini function. Some bdevs will call spdk_io_device_unregister
which never call spdk_io_device_register. It will coredump when assert false in
spdk_io_device_unregister dev is null.
To fix this, let's check whether g_bdev_mgr.module_init_complete is equals true
and then call the bdev_module->module_fini.
Change-Id: Ia9a13318720d954e40eb2d666574bcb86e5f49e3
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462382
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve error messages where possible.
Modify spdk_bdev_rbd_create() to return instead instead
of pointer for better return code handling.
Change-Id: I5fcf90794f5fe44296422c654c5f8d404f3d5eef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
scanf format specification '%ld' expects type 'long int *' for 'd',
but parameter 2 had a different type 'uint64_t*'.
Changed to SCNu64 to reflect the type for range_length and range_start.
Change-Id: I1637b2f7e982a33b45bc765a3e16f7f1302d84cb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Adding some extra debug information for any failing IOs.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: If38de30bcb80d291778ad7325a33b7786d02390d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461588
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In SPDK 19.07, DIF insert and strip is supported for TCP transport of NVMe-oF
target, and DIF reference tag remap is now supported for partitioned virtual
bdev modules.
This patch updates CHANGELOG to reflect these updates.
If summarizing shortly,
DIF insert/strip is supported in the NVMe/TCP target. User can choose
DIF insert/strip or pass-through based on the use case. DIF reference tag
remapping is supported in partition type virtual bdevs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I452ccb60713928087e90bae0cfbf3393dfd61be7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462368
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These arguments are obligatory and spdk_json_decode_object will
fail even before we reach the if block.
Change-Id: I3c17faf570aefc7d96d009a595cf3a76994977e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462043
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an invocation of `start_subsystem_init` method of spdkcli to iscsi test.
This method is one of few that left untested in spdkcli.
iscsi test had to be changed a bit because `start_subsystem_init` requires
spdk to be started with `--wait-for-rpc`.
This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage
Change-Id: I4f49f2ce499ef849d4d41a391844f5947c1b133d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
JSONRPCClient.call recieved optional `params` value,
but then `params` was used in `json.dumps` function (line #159)
as a dictionary, so `None` was treated as dictionary
in some cases, which resulted in TypeError.
This patch fixes above issue by changing
the default value from `None` to `{}`.
Change-Id: I27ca0ccc2d970c0ff9e8117f02203c03e417adf0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Improve error messages where possible.
Modify parts of the code so that it follows the same pattern
as in previousle changed bdev modules.
Change-Id: I6672a14900326029c670bfca99a6d085093861c3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461553
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit 346fefc364.
That commit breaks the shared object build when linking against the
implicit top level linker script. It makes it so that none of the
constructor functions get properly linked in.
Change-Id: I3477acbd86f44b6d5e949eb6725ca4c1b71a55b5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462149
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the RDMA transport, the initiator doesn't properly pick up the lost
connection and we have to kill it. However for TCP, the initiator
realizes the closed socket and fails out. Then when we go to kill it, it
fails the test. So add and || true when killing the perf processes.
Change-Id: Ifed5d726946bad2e9396db40b40f1fee72b4597f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This API can be used to set the socket
with different priority.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9df1122bf6ae640eba731e635a1784f4e9da4104
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These scripts are intended to be run as part of a standalone automated
jenkins fuzz testing job. hey are intentionally set to run for
approximately 20 minutes at a time.
Change-Id: I861e01abf8b86a7531111119655f487f8d982200
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462006
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Kernel versions 5.0.x do not support the -o option from our target.
Currently, kernel versions 5.1.x and 5.2.x are broken for the tcp
transport in loopback, so in order to test against a stock fedora kernel
that works, we will need to use 5.0.x for at least the next few months
until the distributions start shipping 5.3.x which contains the fix we
need.
Change-Id: I41fc5956dd4b53f03879e0adf2427872cd2337ee
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For a lot of the tests, we may want to specify different options for
each transport. I believe this will be more prevalent as we add more
transport specific options.
Change-Id: I83a915629460d1d869eaba4bc86822d7563402ac
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
