Sine core module is responsible for handling IO it
should also handling zone reset logic.
Change-Id: Id8be4bb221cc85f207d44bd45761a72e263ea5ce
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The on_error_exit() function was being called via the local ERR trap
to cleanup after the tests in case any failure occurred during the
execution. However, this was masking the backtrace trap so the
on_error_exit() had to also call print_backtrace() to compensate -
this was resulting in an additional function being unnecessarily
placed onto the stack and included in the actual backtrace.
Avoid the above by refactoring on_error_exit() into simple cleanup()
function called upon exit()ing from the script. The rationale is that
cleanup has to happen regardless if the script failed or not and
elements like $conf_file are always created from the very scratch by
the script itself anyway prior running the tests.
Change-Id: I6bb8f4155525037624f0bd5aab288f8c502141f6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Context:
Every-time the SPDK starts, it creates a large file under
/dev/shm (130 MB in my setup) which is never removed when
the application terminates.
The number of trace entries can be tuned using the SPDK runtime
option 'num_entries'. A value of 0 for this option considerably
reduces the size of the trace file (few MBs) but it is still
created.
This patch adds a special case in the code when num_entries=0:
the trace system would not be initialized, and the trace file
would not be created in this case.
The rest of the code properly handle the case where the trace
system is never initialized.
Signed-off-by: Sylvain Didelot <sdidelot@ddn.com>
Change-Id: If54a548de4a2ce2def8e57d527d0dc20bc55fe4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/606
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
igb_uio doesn't necessarily have to be loaded into the kernel as SDPK
still may be built with support for it but only particular set of
tests is actually using it. If such a condition is met then rmmod will
fail the entire test run since it always exits with != 0 if given
module is not found.
Avoid this by checking first if igb_uio is actually in use.
Change-Id: Ib97488797c657f810b588a0b427e578807ebe6c6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
A recent commit accidentally removed the leading $(Q)
when generating include/spdk/config.h. Add it back to
reduce clutter when building SPDK.
Fixes: b41f404 (make: Fix python command in Makefile)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2084d1e0b24a6a3eafc7c6aef201ca3b8ddd181c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/449
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: <sys_sgci@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If stub terminates right after execution, e.g. due to lack of system
resources (requested number of cpu cores to run on, right amount of
memory, etc.) start_stub() would end up blocking forever since there
wouldn't be any entity around that would mknod spdk_stub0 for it to
break the loop.
Avoid the above scenario by checking if $stubpid is still visible
under procfs and return if it goes missing.
To make sure kill_stub() is still called to clean up after start_stub()
declare proper trap prior the call to start_stub().
Additionally, avoid potential stderr noise in case kill|wait are told
to act on a PID that's not visible in the ns anymore.
Change-Id: Ief41200c57957f84b4f96a54baabc8da1f27dd43
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, kill_stub() doesn't gracefully handle this particular sysctl
since it overwrites it with assumed default that doesn't necessarily
have to be a part of kernel's config on a given system.
Don't presume what the setting should be, instead, read and save the
current value and try to restore it whenever kill_stub() is called.
Change-Id: I1f1ee85c29d5e2ec2f442a54f700e3bc45ee2437
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove detection of python command. If PYTHON_COMMAND isn't set, PYCMD
defaults to python which doesn't exist in some python3 only environments
such as yocto. genconfig.py has already been updated to deprecate
python2 support.
Change-Id: I1a289bc0e30a2de9396e1397a72d8f0e81912a68
Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483418
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Scott Branden <sbranden@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
fdump puts out buffer in following format:
"00000000 76 61 6c 00 val. "
Each buffer is displayed with hex values up to maximum, then
followed up with a value. This is done to keep starting value
with the same alignment between each consecutive line.
Value contents should end at its length instead of
adding trailing whitespace.
After this patch, output is changed to:
"00000000 76 61 6c 00 val."
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I26b327e83f296ba3865f1a337f4a70764a80e2b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483706
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Match script before this change ignored all input
when passing just a new line in ignore file.
This was because \n symbol was stripped from that
particular line (chop()) leaving empty string.
This always matched all of the input when using index().
Now when comparing the input line and ignore line,
we check that ignore line is not empty.
Besides that, to still allow ignoring new lines
we check and compare both strings directly.
Changed chop() to chomp() to prevent further breakage,
difference is that chomp() only strips new line characters.
As that was the original intention anyway.
The loop changed so we exit on first instance of ignored
line matching, rather than mention particular line
multiple times for each matched ignore.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I62d48e1130c600ffff6713d2748239cc955bbe9e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483834
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Empty line in ignore file caused all output from the match
tool to be ignored. This made the test to always pass,
regardless of changes made.
Next patch in series will be fixing the match tool,
meanwhile this patch focuses on making the blobstore
test match and ignore files right.
This patch adjusts match file in following ways:
- keep EAL and crypto output up to date
- use $(N) to match any blob id
- adjust out of date xattr value print
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia0a2312d9691487acbdd06dc08451232171cc46d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We want to split pkgdep.sh to install packeges that are required to run SPDK
and that are needed by developers.
This patch is only split one install command to divide the minimal
dependencies from the developer tools.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I332cbc430bd04e6ef2872ab762da99e837bf0fc2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the purpose of this commit is to avoid an entry into the error log in
the case that a thread does not exist, since there is no separate
function to check if a thread exists
Signed-off-by: Jesse Grodman <jgrodman@gmail.com>
Change-Id: Iec79b87e11e411bde59004baae1dc996864cec4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481576
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Again, smuggle it into one of the existing test case
to create more opportunities for this test to fail.
We'll now trying to remove an inexistent lvolstore
when there's a valid lvolstore present.
Change-Id: I64a72a8ffe38ba6939d0818d2c6c81e49748a33c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This test case is about hotremoving a malloc with
an empty lvolstore on top. We rewrite it to bash,
but also introduce one more similar test case but
with a single lvol in the lvs.
Change-Id: Iea9666080fe5e73befd97ec5e0b2898d8b30ecd6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Those test cases were basically testing hotremove, so
that's how we're going to name them now.
Change-Id: Ib79ab7e50e3022df981f7092436b0a0991d5c9b9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The test case covers destroying the lvolstore using its
human-friendly name instead of uuid. We destroy lvolstores
all over the basic construct tests, so we just smuggle
one removal by name into one of those existing test cases.
Change-Id: I5027382f727be226f601573367bfcd214baf474a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We didn't really test it so far.
Change-Id: I58e57a47465e3c4bc409d497706a56c7aa5cdaa1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
We already perform the same steps as a part of different
test case in basic.sh.
Change-Id: I0e1931307b3de69df95b2a2994b87147028677e1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
We did not test it so far.
Change-Id: I0769c31691535b5d8f9c49e07899f035208efebb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Resize tests were extremely basic so far, extend them
with a test case that actually tries to do some I/O
before and after the resize.
I would like to keep it as a separate test case,
because it uses NBD which used to be quite buggy at
some point. If the resize tests fail on this new test
case, it means the previous very basic resize tests
have passed and the lvol resize functionality itself
doesn't show any failures - this might potentially
simplify some root causing later on.
Change-Id: I7ee45243ee4fc025fc71f6eee4c946211c07a78a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added resize.sh. There won't be too many test cases
in there just yet, but eventually we'd like to lift
some restrictions on lvol resizes and there will be
a fair amount of extra cases to cover.
Change-Id: I3d9db16003ac806241678cfd8441281d557c214c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
When reset operation is ongoing mark zone as busy
to avoid write operation on it.
This path fixes issue #1171.
Change-Id: I30097e1db1bfbbabebd7e6adeab6e8810dc8b2b1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483264
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It fixes memory leak e.g. when add_listener rpc called twice with the
same trid on the same subsystem (ref = 2). In such case kill or
remove_listener decrements ref only once.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib19f2e50838feff1c9108957ee82a42da66e54a2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_thread_send_msg() for notification of bdev hotplug
and test completion instead of spdk_event_call().
Each I/O target group is associated with SPDK thread now. Hence
use spdk_thread_send_msg() to do bdevperf_target_gone() on the
specified thread. The group is held in struct io_target by the
previous patchm and remove target->lcore safely because it is
not used anymore.
Then use spdk_thread_send_msg() to notify master thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88eadbdd1f120161cf484793f14f5eb0b44d010f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Register the global bdevperf object as an I/O device by
spdk_io_device_register(). Create and destroy I/O target groups
asynchronously by using spdk_for_each_thread() and
spdk_for_each_channel().
spdk_for_each_thread() and spdk_for_each_channel() serialize the
execution among multiple threads, and any lock is not necessary.
Additionally, for bdevperf_submit_on_core() and
bdevperf_stop_io_on_core(), replace for their loop + event call by
spdk_for_each_channel() and rename them by
bdevperf_submit_on_group() and bdevperf_stop_io_on_group(),
respectively.
This advances the work to move bdevperf from core based to thread
based.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63b512d0b8e734e862afe1f7a4053414b99204d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows to configure desired retry_count instead of using
hard coded value
Change-Id: I25c9601997ace916dfb735469a4b443c0cd2a96b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482499
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some functions performed incorrect header/data digest
support check, align it with NVMEoF spec. Use a table
to check if PDU supports digest depending on its type.
Change-Id: I6170dd19ace017f37fda0a923f604732799460b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483375
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the recent changes which added usage of writev_async to
both TCP target and initiator, nvme_tcp_pdu::writev_offset
becomes useless since it is not updated in data path. This
field is only used in UT. Remove this field from nvme_tcp_pdu
structure, now nvme_tcp_build_iovs builds iov which fully
describes the PDU. Update UT accordingly.
Field padding_valid_bytes is not used at all, delete it too
Change-Id: I2d6040ae64d6847cb455f59f65ec5677de8e5192
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483374
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Bdevperf tool had not called spdk_poller_unregister() called on the
same thread that called spdk_poller_register(). But it had not caused
any issue because spdk_poller_unregister() simply set the state to
unregistered. This design flaw has been fixed recently.
However the new pause feature has been added to poller and this
design flaw might cause any unexpected behavior if paused poller is
unregistered.
We do not know any other case such that spdk_poller_unregister()
is not called on the same thread that called spdk_poller_register(),
but we have no way to know it even if it exists. Hence let's add
assert for such cases.
Parsing poller lists managed by thread may be another option but
spdk_poller_unregister() is performance critical. So we do not check
list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d91daaeb81fa33d5f042dbe7ddbd8ab6ea98d55
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_put_io_channel() was designed to be called on the same thread
that called spdk_get_io_channel(). spdk_put_io_channel() sends a
message to its own thread, to allow the context to unwind before
releasing the resources. This had the side effect to allow an
incorrect thread to call spdk_put_io_channel(). This patch will fix
that.
Bdevperf tool had a design flaw that needed the side effect, but
it was fixed recently. We do not know if we have any other case.
Hence add assert to spdk_put_io_channel() to find other case.
We found that unit test for blobstore had called
spdk_put_io_channel() and fix it together in this patch.
Besides, correct the comment for spdk_put_io_channel() in
include/spdk/thread.h not to create any other case in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6ec7bf074818abef43b23ca40bc9385adac70a75
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479390
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is no need to support read operations on separate thread.
Change-Id: I10b595b8eeaf5fd0182f05913fdd5baa4b84961f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Allow for using appends instead of writes.
Change-Id: I2f0d3bcdbb0eee034f7b0b6349de854ddbf7273d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481839
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
bdev_nvme_detach_controller call should be used instead of
delete_bdev_controller
Change-Id: Iaa8bb2580d108eaf28c64a9fa7e352991cf2608d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
ftl_bdev_create call should be used instead construct_ftl_bdev
Change-Id: If361ca6be8c5118dd55579e8c0a219041b7f1e94
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481811
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Update FTL documentation according to recent changes in API.
Change-Id: I86de8c115f2dedaff5f281d17a35bce34c35cef0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
