Currently on blobstore creation we use write zeros everytime.
Some drives does not support write zeros, but support unmap.
We should do write zeroes only on metadata and try to unmap
data clusters
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iae36c1ccacc08340e79ad40c4c9a2c53dda920ba
Reviewed-on: https://review.gerrithub.io/387152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Commit c63d9de433cb4b624521ae5f0ec699755c347761 replaced
remove_vhost_blk_controller with remove_vhost_controller, but test
wasn't updated to match. The test had already been broken before that
point, because the RPC method name was incorrectly spelled using "block"
instead of "blk". This hadn't been caught because this particular test
is expecting a failure, just not the particular failure that is being
caused by the incorrect method name.
Additionally, the "create block controller with incorrect name" test was
actually using the construct_vhost_scsi_controller RPC rather than
construct_vhost_blk_controller, so fix it while we're here.
Change-Id: Ib60f51639e0a3f65b09e2663186aa259be407ee4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388060
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch could prevent the potential coredump of
accessing rte_mempool among multiple threads. We
allocate the tasks from the beginning.
BTW, this patch also refactors the bdevperf to remove
dpdk dependency
Change-Id: I841e6c8b43276923acaf6686377741c37e2e71ec
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Using pthread_create is much cleaner, and avoids race
conditions related to the forked process sharing memory
with the primary process. Specifically this fixes
a double spdk_event_call() of the shutdown event - one
from each process. The primary process may have already
recycled the shutdown event, and when the forked process
calls it again, hilarity ensues.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3e4b77b8b380a8fa0227b770758099bcee0ef35b
Reviewed-on: https://review.gerrithub.io/388520
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
dev_fd => fd for /dev/nbdX device node
spdk_sp_fd => fd that SPDK will use to poll for new
I/O requests from the kernel nbd thread
kernel_sp_fd => fd passed to the kernel to send I/O
to SPDK
This enables an upcoming patch to switch from using
fork() to pthread_create().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0840a35eb1ba12810b7fc12775ee0df9ad3d99f9
Reviewed-on: https://review.gerrithub.io/388519
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is outdated and not really usefull.
Change-Id: Ifcfd1c987467448cb6f827457de215922a701d77
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387797
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Introduce SPDK_AUTOTEST_X to allow controlling '-x' flag.
Fix ldconfig detection - it is not always in /usr/sbin but should be in
PATH.
Fix (once again) regexp in print_backtrace. Also obey current '-x'
option.
Change-Id: I782b6445e7d44ceb168fd4d9874300f1c71f4f80
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387610
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This is inconsisten with local variable deffining the same path. We need
also to move negative vhost app tests from run_vhost.sh since VHOST_APP
will not be available anymore.
Change-Id: I21cee58c545357ca7e7997cb529b15d436cfed57
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/387561
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
"OK/NG" may be only used in Japan. It may cause misunderstanding.
Hence remove "OK/NG" or change to "Allowed/Denied".
Access control of iSCSI target follows further refactoring.
Hence to save the amount of change, "OK/NG"s are mainly removed.
Change-Id: I1f2ef9bc2be21caa86a6ae98377b6d6b3f85386a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385075
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Running the 'touch' command unconditionally causes the compile step to
return 0 even if the compilation failed. Instead, only run it if the
compiler succeeded.
Fixes: 4f1634435640 ("make: Update build artifact timestamps for clang
support")
Change-Id: I46907851fde8bb9e3f73549276e489b6c30ed1fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388324
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <ed.rodriguez@netapp.com>
The vdev->ctx conversion is now
straighforward and doesn't need
any macro.
Change-Id: I88b0cf3fa5e95b93e5f69a0a3ae9508f9fac3683
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385625
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a single header file that
provides access to all virtio initiator
capabilities. This is a preparation
to exporting rte_virtio as a separate
spdk lib. Also renamed virtio_dev.c.
Change-Id: If45a0cadc61943b6ffd87cf70a59321a83b238a6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's contents have been moved to
virtio_user/vhost.h and virtio_dev.h.
The virtio_user_dev struct can't be hidden
in virtio_user.c (similarly to the virtio_hw),
due to another abstraction layer in virtio_user
- vhost-user and vhost-kernel. Even though only
vhost-user is implemented now, let's not close
the possibility to implement vhost-kernel in
the future. The vhost-user/vhost-kernel code
should probably be placed in separate files,
with the virtio_user_dev struct in common
vhost.h header.
Change-Id: I36ee96eff30b398dd129953a874513e727619f98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved it's contents to virtio_user.c.
Having this logic separated across
multiple files doesn't make much sense.
Change-Id: Ib2daaa56e1b3d755d9476abca247c7cbcfa7096b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Renamed all vtpci functions.
While here, also added some documentation.
Change-Id: Id24aaab8c5b556b969c60ee1c95b9d46936ea13d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385426
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
virtio_hw struct definition is now hidden
in virtio_pci.c. The API to enumerate all
PCI devices is available through virtio_dev.h.
Change-Id: Ib9c968732d9f78204e9664c426ad99542cfe8c93
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385425
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vtpci layer is about to be removed.
This is only 1:1 code move, all functions
will be renamed/refactored in future patches.
Change-Id: I63c1b30fdaf6eff2e5d8bf60e62c87c2cb9f2b15
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385424
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that legacy PCI support has
been dropped, we can safely assume
there's only one backend type
per device. So the vtpci_internal
- containing process-local data -
can be removed.
Change-Id: I15d87a280b74318c7a44ee60ce3408756d1f5a69
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385423
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch initiates the removal
of the vtpci layer from rte_virtio.
The general idea is to provide separate
virtio_dev_construct and virtio_dev_init
functions. construct would just allocate
and setup the struct data. init would
be the one to start the device via
MMIO/vhost-user. virtio_dev_construct
takes 2 params - backend ops and backend
context. The context is kept as void*
and can be cast to proper structs inside
backend ops callbacks.
Change-Id: I1d6d92e1cf09b9d0c9fa4fd2cb70203e3fc7e65b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We currently pass virtio_user_dev as
an argument to various function in belief
they will access the virtio_dev via
virtio_user_dev->vdev field. However,
this field is about to be removed soon.
This patch is a mid-step towards a bigger
change. See the next patch for details.
Change-Id: Ie684aa1614d9777d79d350bbfda79effe2a2d5f6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385422
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It's been only used in 1 place.
Change-Id: I0b7c9cdb809a6946eda5ee361362dec86e57b4ef
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385623
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for future changes.
The general idea is to provide separate
virtio_dev_construct and virtio_dev_init
functions. construct would just allocate
and setup the struct data, while init
would be the one to start the device via
MMIO/vhost-user. If we want to destruct
a non-initialized device, there's no
need to do a reset.
Change-Id: Ib8ce56169e86e43fba8fcd1bf6c2a5b12ed99966
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Even though config change intrrupt
handlers are still required, we need
them only for real PCI devices.
They should be handled internally
in vhost_pci.
However, current QEMU implementation
doesn't ever change SCSI PCI config,
so no interrupt handler is required
for now.
We might want to add it together with
Virtio-Blk, as PCI config will change
there with each resize.
Change-Id: Iece024cd31c788857ce900385e289758ca3f5948
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385304
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It's been only used in 1 place.
Change-Id: I3e933d3fb0816ea30f983fb3de69ce49238c3b72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385303
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When there are no lvols present on lvol store
spdk_bdev_module_examine_done function is not called
when tasting is done.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia6c559f392148e3b4444dbc547df462bbe02356d
Reviewed-on: https://review.gerrithub.io/388402
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Until the fio_plugin unload crash is fixed, disable the fio portion of
the tests so that we can re-enable the rest of the bdev/virtio testing.
Change-Id: I8d18fff729262fa88cbc66fce914cf1ff92db83e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388307
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Switch the iSCSI process in the iSCSI/NVMe-oF test to use a UNIX domain
socket for RPC instead of a TCP socket.
Change-Id: I130b2871c74b6bd9aa55a63d751c995a579e03bf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Switch the ip_migration test away from using TCP to access the RPC
service.
Change-Id: Ic89f59acf60016ae2669b267f09a035413ab22e1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388286
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Allow overriding the default RPC server address.
Change-Id: I9ff11b0d8a244cbc1ca0e5b291ab2f88d0b257c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
discover_bdevs previously took a port number for the RPC service, but
after commit 6bef902ca5 ("rpc: add default UNIX domain socket listen
address"), running rpc.py with just a -p (port) parameter doesn't have
the expected effect, since the default server_addr is now a UNIX domain
socket path, and the port is ignored.
Change discover_bdevs to accept a socket path instead of a port number
to fix the issue for the vhost/initiator test; no other callers use the
disover_bdevs rpc_port argument, so this is the only instance that needs
to change.
Change-Id: I4e290f175ccc79caa3c4ef76c062641b9fe489a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388283
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_iscsi_init_grp_create_from_configfile() returns 0 even if
creating an initiator group (IG) is failed due to empty netmask or
initiator name. This will be unexpected behavior for end users.
Hence change the return code from 0 to -ENVAL for this failure.
Besides do the following.
Change other error return codes in the function by using errno too.
Current IG don't have any UT code in repository. UT code to confirm
this fix is also submitted.
Change-Id: Ic918feb5c6a3e772b325664d881b2673b553a217
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic11a56c5616098ff42f31f78aa96289af5965118
Reviewed-on: https://review.gerrithub.io/387611
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If89275acfb1560982e332148a99ed3c83f8cb34f
Reviewed-on: https://review.gerrithub.io/387609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move vhost tests with split disk configuration to nightly test
to save some per-patch testing time.
Change-Id: I837a66cd9b02935c3bbef1f9ae019cbf53d5869b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/388372
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Typo caused lvol blk test to not run.
Change-Id: I1e26b96757450a3ea860e0b74a0b7d976c86bdf2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/388413
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ifd924bcee94bc4e36530b42a07afb5141b150cad
Signed-off-by: lu fan <lux.fan@intel.com>
Reviewed-on: https://review.gerrithub.io/387722
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding new functions to core vhost requires adding their equivalent
mocks in both vhost_scsi_ut and vhost_blk_ut separatly. By adding common
file "test_vhost.c", we can prevent duplicate mock functions.
Change-Id: I4542ae092e158b94b25559216e1fc46e10c1a1ae
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/383357
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to unlink the unix domain socket
regardless of who created it. Even we
got the "socket already exists" error
on init, we would still unlink the socket
on shutdown.
Change-Id: Ib14382d6d7e127d8f51f6544cbb063594e040879
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388284
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Deinitialize only those subsystem that
have been fully initialized.
Change-Id: I86cdd4cda0a80c107956843ed8198072e898a743
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/386892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_nvme_io_passthru_md() is verified on QEMU NVMe
and will be verified on Cosmos mini OpenSSD.
Change-Id: Ib759b6b6095deaa4ae7cf746f3a241f678295605
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/387114
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows 'make' without 'configure' to work out of the box if the
user has already updated the dpdk submodule.
Using 'configure' is still the recommended way to build SPDK.
Change-Id: I59fda03197939a745d2ed92b4d15ae0d7d8cdba5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- for environments that don't support rlimits
Change-Id: I6dde1eb9e1cb2274462a450625d8bc70a3889163
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/386355
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We probably do not allocate the mgmt_channel when we destroy the
rdma queue pair, add the judgment before put the io channnel.
Change-Id: I528c9686907c04c5025ff9d3872f24f2996e9d33
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/388159
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I162bfd8090bb376cee08c5e811d632e4d2c6db10
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
