Some nbd io type has no payload, like NBD_CMD_DISC.
Change-Id: I17babf625f51d32bf07fa7a9b6a7396660b39cd5
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By supporting the management based on linked list for PG and IG
the group state of PG and IG are no longer necessary.
Change-Id: I249424cacd2d27dda4e4cb2182442d0d1e9bfb8e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current fixed sized array for iSCSI target is not thread safe.
When newly created targets are inserted into the array, multiple
targets may be inserted into the same position. Linked list is
better than fixed size array to support dynamic reconfiguration.
Change-Id: I4db5a3ec16844db06e0cfcd2aef1f97952f15afa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The results of access control procedure for login in the
spdk_iscsi_tgt_node_access() is defined in the following table:
+------------------------------+
|iscsi name |netmask |result |
+------------------------------+
+------------------------------+
|denied |- |denied |
+------------------------------+
|allowed |allowed |allowed |
+------------------------------+
|allowed |denied |next IG |
+------------------------------+
|not found |- |next IG |
+------------------------------+
However current implementation have redundant repetition in the
spdk_iscsi_tgt_node_access() and the above definition is not
visible. Hence refactor spdk_iscsi_tgt_node_access().
Besides refactor spdk_iscsi_tgt_node_allow_iscsi_name() because
it has redundant repetition too.
Add UT code for these changes.
Change-Id: If06d87c1246c85439ee0482149bd887a7b53b169
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Naming rule of access control of iSCSI target does not reveal its
intention. Hence change it before refactoring to avoid unnecessary
repeated procedure.
Change-Id: I4064ec0a5a2b52244b6de3958ee2ab41342d1a57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
1) Rename to "User's Guide".
2) Link to @ref getting_started.
3) Note that QEMU 2.10 now supports userspace vhost-scsi, and
the SPDK patches are only needed for vhost-blk.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id3508be4714fa35e9846d47019caf859cef65192
Reviewed-on: https://review.gerrithub.io/389412
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Fix: Add condition to some test cases
because there are more possible return values
in check_get_lvol_stores function.
Change-Id: Id035d1edc52252f009277c9afd5f07f8875e0dcc
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/388242
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add a small description of what the script does.
Change-Id: I8a9373d204e7abc83772b5d5a95de30ca260dd7c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Althrough the two functions are empty now, but they are not
vhost_scsi specific.
Change-Id: I331a455374f7dd92fd76cab255a43072baceb0dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the existing bdev_null_destruct() function instead of open-coding
the bdev cleanup; the bdev_null_finish() path neglected to free the bdev
name.
Change-Id: Ie74be39b0475674f70c3999bbe2f21caab2e2e20
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389867
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the nightly tests are hanging due to the AER test program,
which waits for a temperature threshold event to occur. The QEMU
emulated NVMe controller (as well as the SPDK NVMe-oF target virtual
controller) don't emulate this condition, so the test never finishes.
Change-Id: I41a216f77ffbb3beaef2fdf7533fe62c36033fc6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389908
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of this patch, it is unused.
Change-Id: I15f42b8cc43e3792ae69c91f3911b7853d5b5664
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It has all the same properties of uniqueness, so
implement it as an io_channel to take advantage
of the other infrastructure for message passing
already available.
Change-Id: I1777b91f0597a5a43ac0d0bbfdf878e874eb04f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388291
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This correctly puts all of the I/O channels on the right
thread during shutdown.
Change-Id: I432c8cb981a68b40639f8876dae42597a9e6a85f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When device was reinitialized, the old
virtqueue memory used to leak. While
here, also added a doc for virtio_dev_init.
Change-Id: I9bb8dbfa5d68deeb73e71567a7e51b82f869537a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388297
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia688b082f2b5a74b78ebd1fe7a3f0ae33e084a8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389920
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All SPDK public API headers should include spdk/stdinc.h first.
Additionally, the other headers included in lvol.h aren't needed;
spdk/queue.h was unused, and spdk/blob.h can be replaced with a forward
declaration of struct spdk_bs_dev.
Change-Id: I89fad764efbb4c088ce325392f8237c1a869a895
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389895
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The vbdev_* functions that were declared in lvol.h are all internal to
the lvol vbdev implementation; they don't need to be in the public
header.
vbdev_get_lvs_bdev_by_lvs() is moved to the top of the file so it
doesn't need a forward declaration (no code change).
Change-Id: I98282d3cb0008da5c5b5059eee335219dc929f1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify the vbdev_get_lvol_store_by_uuid() API function to take the UUID
as a string instead of a uuid_t, since this simplifies the calling code.
This also allows us to remove #include <uuid/uuid.h> from the public
API, giving us the freedom to change the underlying UUID implementation
later if necessary without breaking API.
Change-Id: Ib360281f384f95722c5ab64e75dcf3603f826e4c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the call sites already have a lvs pointer; there's no need to
look up the lvs by UUID again.
Change-Id: Icef54d84e7c89f682ea47f10b282839ab4237ce0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This issue may be hit under some large IO and large queue
depth cases where much memory will be consumed and the channel
may be failed to create due to insufficient memory.
The general fix here is that we need to properly handle
the error case that the channel is not created due to this
or that reason.
Change-Id: Icf58a7c8a9cba625ef1b8da6b8bf68ef72ef5546
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386051
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The array of message strings is now only used in vhost_user.c, so it
doesn't need to be exported.
Change-Id: I40163b95a52a1762eb3639db5553814bf1299959
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev module get_ctx_size callback is only necessary if it returns a
non-zero size.
Change-Id: I00ca366b8a1949bdb091c5e8aefb19cb606481d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than iterating over the g_nvme_bdevs list to determine if a bdev
is an NVMe bdev, we can just compare the module pointer.
Also, the function can take a spdk_bdev pointer directly rather than
casting from a void pointer.
Change-Id: Iccf3c9b3263e9b2d67d07d037dc00d1cbc0f22a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389899
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch will make sure the nvme bdev work in correct way when we delete
bdev by using rpc method and then exit the app.
Change-Id: I19172440d46d96c7396282e1bef07d98ab601390
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
replace the bdev_nvme_destruct() with spdk_bdev_unregister(),
clean all the resource in the bdev layer.
Change-Id: Ic4b85dee6225f42babe868796a8c24dec5c22af6
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389855
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
User may only want to configure hugepage and no configure
on the PCI devices. Add the SKIP_PCI parameter to offer
this option.
If user only wants to configure hugepage, can run:
SKIP_PCI=1 ./scripts/setup.sh
The default behavior is that PCI devices will be configured.
Change-Id: I8302efd5a09f2885e00fa8ed00d398219c11dde7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/389473
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Introduce several new functions configure_linux_pci, reset_linux_pci and
configure_freebsd_pci for the PCI devices relatd operations.
Change-Id: Ifdaddd314ba01fd73ff700d231a6aeae5ec7c480
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/387265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the common SPDK application argument parsing function.
This adds support for several more common options to the bdev_svc test
tool.
Change-Id: Iccccf158164182aa36d0837210d8b189be3b6cd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will allow to put another test cases
in specifig group.
Change-Id: Id352aa516676f78cdb102f8eac70144f115976a5
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/389098
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently SPDK NVMeoF will allocate data buffer from mempool, however,
some data buffers may not block size aligned, this is okay for NVMe
backend but will fail for AIO backend. 4KiB aligned data buffers
should be okay for most AIO backends.
Change-Id: If7b9c2962d716addbd755e80e59620377f2ba488
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389245
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Getting SPDK_GPT_GUID is only necessary inside the part_dev_by_gpt()
function where it is used; this shortens the log and saves some build
time.
Additionally, $rootdir is not necessarily defined by all scripts
sourcing scripts/autotest_common.sh, so this fixes several (harmless but
annoying) error messages:
grep: /lib/bdev/gpt/gpt.h: No such file or directory
Change-Id: Iea7a46273437ee54a15097e63700487f7bcd324f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389608
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The 'm' variable was only used in sizeof expressions; m was a struct
vhost_user_msg, and we already have one of those called 'msg' in the
function where it was needed.
A previous commit removed a RTE_USED() marking on m, which introduced a
warning on clang, since it can now see that m is unused.
Fixes: 73bfcede86d2 ("rte_virtio: remove rte_memzone from vq")
Change-Id: I63eb0d82c7c750b4181b6312bbda82ef3213c205
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389648
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also removed vdev->started field.
Used vdev->status field to determine
if a device has been `started`.
This is simply a cleanup.
Change-Id: Ieb06b03b3bd60bd5906b41c987c418604906c913
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388296
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that vtpci_internal has been removed,
the vdev->id and g_ctrlr_counter are
obsolete and can be removed as well.
Change-Id: Ia1e83cdc81552173f4b57283f83c5791e2b90daa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388301
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Removed another direct DPDK dependency.
Change-Id: I12d9a49fb16fbefad42c09f46c280f6f7be094d1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388300
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use standard spdk_dma_malloc instead.
This removes another direct DPDK
dependency. Yet, for multi-process
support we will more likely use a
memzone for the entire virtio device,
not it's virtqueues.
Change-Id: I57119ad830b573b718605b46cc3099b105651ee9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385629
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Replaced them with spdk alternatives.
While here, also clarified the documentation
for virtio_*mb.
Change-Id: Ia604e9abd8eadc18fa3ea1a782e29e7da6b3c162
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385627
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently there are a bunch of asserts() on metadata
descriptors - change these to fail the blob parsing
instead.
While here also return -ENOMEM if any of the memory
allocations fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie37b73c57b304d05a45d10a8d33bcc1d47e7a1be
Reviewed-on: https://review.gerrithub.io/388702
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
data_ro means that write, write_zeroes and unmap operations are not
allowed.
md_ro means that resize, set_xattr and remove_xattr are not
allowed.
There is no code yet that can activate this - it is coming in a future
patch. Two usages are planned though:
1) a user explicitly marks a blob as read-only - this is persisted so that
future loads of the blob will ensure the blob cannot be modified - neither
metadata nor data
2) a future feature flag framework (how's that for alliteration) may allow
a blob to be opened, but not allow metadata modifications, if there are
feature flags set in the blob's or blobstore's metadata that the
application does not understand
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I247fd900430c56f7176edfb80dddd5a1a6c8dc87
Reviewed-on: https://review.gerrithub.io/388663
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use the env.h abstractions instead.
Change-Id: Ib8a34b28d86a057cc37812568f4c6cce3e8301c3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389402
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
