If trsvcid is not set in the nvmf_subsystem_remove_listener call,
rpc client treats it as 'None' and sends "null" to the application,
which causes decode failure in SPDK.
Trsvcid is described as optional and should be treated this way.
For such a listener removal call with an empty trsvcid, "" should be
sent as trsvcid instead of "null" in the json request.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ic26907c22a2600c9618354ce8ff63e93e00aec09
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9659
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow runtime observation of the
dynamic scheduler in a release build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7436b5dbcaa0df1529f828ef75f4e9335a092893
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9672
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add bdev_retry_count to spdk_bdev_nvme_opts and retry_count to
nvme_bdev_io, respectively.
Set type of both to int because we want use -1 for infinite retry.
Set the default value of bdev_retry_count to zero for the backward
compatibility.
bdev_retry_count is configurable by the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc746fcea54aa8722c76f79c70c2ae2b375aa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
retry_count of struct spdk_bdev_nvme_opts controls the number of retries
in the transport layer, and is set to transport_retry_count of struct
spdk_nvme_ctrlr_opts.
The next patch will add bdev_retry_count to struct spdk_bdev_nvme_opts
to control the number of retries in the bdev layer.
For clarification, rename retry_count to transport_retry_count of
struct spdk_bdev_nvme_opts. Then deprecate the retry_count parameter
and add and use an new parameter transport_retry_count instead for
the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0689c54aa1c96ee99d24236e8ff1a594ad7208e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9924
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK nvmf target reports all listeners on all subsystems
in discovery pages, kernel target reports only subsystems
listening on a port where discovery command is received.
NVMEoF specification allows to specify any addresses/
transport types. Ch 5: The set of Discovery Log entries should
include all applicable addresses on the same fabric as the
Discovery Service and may include addresses on other fabrics.
To align SPDK and kernel targets behaviour, add filtering
rules to allow flexible configuration of what should be
listed in discovery log page entries.
Fixes#2082
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie981edebb29206793d3310940034dcbb22c52441
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
You can now detach specific paths based on the host parameters. This is
useful for two paths to the same target that use different local NICs.
Change-Id: I4858bfda7d940052ca77ffb0bbe764a688fb315d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9827
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This patch is to solve the issue that two nvmf target connect the same rbd image and used for multipath.
The scenario is host wants to access the same rbd image via two gateways, host and gateways are working as nvmf ini and tgt, and two gateways connect with the rbd image, io can switch to another gateway once one is broken. The targets of multipath must have the same uuid, so this patch add a new argument for bdev_rbd_create, like malloc dev.
Signed-off-by: tanlong <948985618@qq.com>
Change-Id: I593fedb6c5d94f625f1b331fdc40e2db488f7fb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9935
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also moved qat_setup.sh to functional tests
fixes: GH#2203
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iab69b192a29013a69f4cc4a251a34dcc6fbf6b7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9952
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently the only way to see the relations, while using trace.py script,
is to feed it a JSON formatted file. This patch allows trace.py
to do the same for the for the binary trace files.
Change-Id: I7237896ede608080d3bec896a43586e34c297b04
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9906
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make use of the changes introduced in previous patches while
printing trace information.
Change-Id: I69edadfb4a7d34fa9c8c1c520b083372317cabbb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9638
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Currently we do not have any way to connect traces from different
modules in SPDK. This change modifies our trace library
and app/trace to handle adding relations between trace points
and a trace object.
Additionally this patch adds classes and fields to structs
inside trace.py to prepare it for future patches implementing
printing relation information.
Change-Id: Ia09d01244d923957d589fd37e6d4c98f9f7bbd07
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9620
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Forced grep to use use basic regular expression syntax (-G option) and
removed escape characters from "{", as they're not needed in this mode.
It fixes the following errors:
fatal: command line, 'enum spdk_nvmf_subsystem_state \{': Unmatched \{
fatal: command line, 'enum nvmf_tgt_state \{': Unmatched \{
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7dd15207d6ff22d229d8f66668d33e0f5596379e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an USDT probe is defined within a shared object, bpftrace expects the
path to that shared object instead of an executable. This means that we
need to replace __EXE__ in the bpftrace scripts differently, depending
on whether the application was linked statically or dynamically.
This is now done by the `scripts/bpf/gen.py` script. It lists all
available probes, along with their locations, of a process. Then, it
matches them to those described in a bpftrace script replacing the
__EXE__ markers with the listed location (either a path to the
executable or a shared library). If a bpftrace script uses a probe that
isn't listed, its __EXE__ will be replaced by a path to the executable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c323d5f7d948ea57cf8d4d3132e4d59a2de594f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9807
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id22c28c46a5fbdf5bd76b31d16f07f2672dfe14e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9306
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4f838df0bfb91398eb5d179a982165adb8af3476
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9291
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib24714363405f926ac8483244b24296fe35d5a86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9591
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A temporary workaround for issues seen when using "adq_enable"
is to set channel-pkt-inspect-optimize on before fio ramp_up and
turn it off when ramp_up is ending.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I74f71d11e3b9d1a064b36de8acc7a2a23f51a34b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* Added sleep as sugested in config guide
* Moved adq_configure_tc() before nvmf_create_transport()
* Added extra logs to output
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icc253b98a0fadbe917e912342f91e2bc5ca5064b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9703
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add tcp events changed in previous patch to the trace.py for
enhanced event information.
Change-Id: I8f176905a8283ba1b588d95bdbc075c38677acbe
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9307
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Changed the way a line is formatted to avoid unnecessary operations.
This slightly (~5-10%) decreases the runtime when the script is executed
on large trace files.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5549462d56f866bea99609f746aa53890b98d622
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
The stack trace is no longer printed if a user presses <C-c> while the
script is running or pipes its output to tools such as head or less.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0951c38d914986b5c9bf2ee98bcd046f0e957ff0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
It makes it more convinient for a user to start the script, as it's no
longer necessary to update the library path manually.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0dbeb54cad2585a50162c91f48c5ef199fa133b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Added trace provider based on the trace library. It uses ctypes to
define the trace objects and execute library calls. It significantly
(~2x) speeds up the execution time on large trace files.
The script automatically detects the type of the trace file and will use
the appropriate engine (either JSON or the trace library) using
python-magic for file detection. When piping a file through stdin, JSON
format will be assumed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icfa216edee4662714266968eeb72f0097b3779b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9439
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At least on my system, I need an extra escape for
the opening brace in the generated enums.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f1d55f817bc10b3b1084d8280f330cdbd50edf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9671
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bpftrace scripts do not allow struct definitions after
the first probe definition (including BEGIN/END).
This is problematic for an upcoming patch which will
include some struct defintions.
So instead just add the generated BEGIN/END probes
with enum definitions to the end of the user-specified
script, instead of the beginning.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7bc8c18c0891ee26edc099aef96ea18ed63ccb72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9670
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibcc7a77d1ebcc013b5050564fcc31b23b1202912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This parameter may have the values "disable" or "failover". The default
is failover to match existing behavior. In the future we expect to
change the default behavior to disable.
Further, we expect to add an "enable" option soon to do full multipath.
Change-Id: Iebbdc9b95f23101f18d64e085933463498e627be
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9343
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1a4d32de6a83800cdcd65dde3895a36731c52838
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9710
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These fields aren't needed by the JSON provider, as the trace entries in
this format already has the owner and object fields filled, but it'll be
needed for the provider using the trace library.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9db974793193fe59bfffc8dd3b975d5343036be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This abstraction will make it possible to support different sources for
the traces. The current JSON implementation is moved to a provdider and
a new one using the trace_parse library will be added in the following
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I322e7984ffe19ce8b8e1bb551e8339655383623f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifdd1d02b466b6496469c9ea1f09633b6e368ab57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie1af1cb4778edd265914bbfdc2777f66c6c76572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9362
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ifa8e80e0a25af7757181f480ab0405ec902a61ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9596
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add "create_remote_json_config" which will create
a bdev JSON configuration for SPDK initiator to
connect to NVMe-oF Target.
Change-Id: I2370c6911df35ffa1f27e93bdfa4ddb7f174ea49
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8776
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia858a47e51a6ef4a0fba1dc1e68d314b27e20342
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9276
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The check needs to fail if documentation is missing
for any RPC. But the way the check was written, the
rc would get set to 0 everytime it found docs for
an RPC. This means it would only return failure if
the last RPC that was checked did not have
documentation.
While here, add a message telling the user that
JSON-RPC docs are being checked, to be consistent
with other checks in this script.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib2ff0f0432ce3e2853526223c0ad00176d84a78c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9391
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK has been inconsistent in the argument names,
most use dashes (--max-subsystems, --io-unit-size),
but in some cases we had underscores (--tgt_name,
--include_aliases).
So let's do 3 things here:
1) convert all argument names to use dashes only
2) if user passes and argument with an underscore,
convert it to a dash implicitly - this ensures
backward compatability and is a bit less pedantic
3) enforce use of dashes in check_format.sh
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99289d3d3b03ce40cf192ad4fddec7b5c6bc8388
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9390
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This one provides devtoolset packages which can be used for adding
alternatives for some older packages like gcc for instance. Useful
for the CI to bring newer stuff into VMs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia82d712e670177f37256a999f5dc2a07784d2218
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9500
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some distros may already provide liburing (e.g. fedora34) as a
package. In case given system has it installed, without the devel
portion, we would skip building our own version leaving system
without proper include files needed for the tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7b07ba8d1c3c6b97d6b114935dfe472cc7902bf6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This script contains the necessary steps for the cross-compilation
of SPDK and the libraries needed by SPDK for aarch64 on x64 machines.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: I6319f461242b267ca4b63f276d98ee8820085bfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD040 - Fenced code blocks should have a language specified
Fixed all errors
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iddd307068c1047ca9a0bb12c1b0d9c88f496765f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9272
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I25f7d20ff953e612d7982207d57607f1c3bbaa90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9361
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As per os-release(5), if $ID is not recognised, $ID_LIKE can be used
to identify similar systems in preference order. Modify the script to try both
variables.
Also do the same for the RPM build scripts.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4ed924df01ec678aab232e114d8c9980463c38e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9260
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
In case SPDK app crashed the leftover sock file would force completion
to use rpc_get_methods() instead of the -h output to get the list of
rpc functions. The end result would look something like:
$ rpc.py <TAB> IsSPDKapplicationrunning?
By the very accident this is quite informative about the state of the
app but from bash-completion standpoint not very useful. Instead,
if rpc_get_methods() fail fallback to -h output.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9ca0b919445e5a08c49ab8fa5d0a3acc2e5c4e4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
This helps in completing, for instance, file paths as arguments to
some of the rpc functions (like bdev_aio_create, etc.).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id0880773fade3fc6128ac9de6abfe19f6b40077f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Symlink requires repo to be around, having a hard copy allows it to
be used standalone.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If5aa354b10762805394418e9c9c0d171623ba093
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD025 - Multiple top level headers in the same document
Fixed all errors
Update check_format.sh to fit new header style in jsonrpc.md
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5f832c549880771c99c15b89affe1e82acd3fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add option to enable gathering BPF traces while
running the test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9ea317a37c3638def40a525eca06f2d8325a74c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow redirecting output to file. Using simple
"if" for an environment variable, as script arguments
number is variable and using getops seems like an
overkill.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7e219bb1fd6377bc20c44b76cec3685b32e9316c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
create_json_config_with_subsystems contents does not
need to be in a function. Moving it to main simplifies
--with-subsystems condition.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1414a209cc666ebb4639fc25133168482bd96c97
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8775
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to keep "bdfs" variable as global variable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I655ed9f1514f13a6460292c1298ef08f904157fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8774
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I21b7798e1004b227bcd7f62ee8867667c67dab7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8773
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
-g option using only files known to git, that allow us
to avoid errors from submodules
Also add check if mdl is installed, and gracefull info if not.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib6e1920774ffca81e62d9abebc8d8b4548feb519
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9086
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since we will create new bdev relied on libpmem object
library, so need add it.
Change-Id: I7ddcc694fd2ec5a0536abc9813b13fa429fcf068
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9049
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This package is no longer available in PyPI.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3e68b03eabeb4aff14453c90846fd03452c93ae2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8956
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parses and verifies hexadecimal cpu bit mask specified by the user.
Added verification to check for cpu cores range, making sure poll groups cores
assigned within the range of cpu cores allocated for the application.
RPC nvmf_set_config now takes an argument to configure ‘poll groups’,
a new parameter for NVMf subsystem. This parameter sets a CPU mask
to spawn threads which run an event loop for a ‘poll group’.
Change-Id: Ied9081c2213715ec94de00a8b37153730b8ac2ed
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5611
Community-CI: Mellanox Build Bot
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This parameter is still part of API spdk_sock_impl_opts
structure but it is not used. Keep it to support ABI
compatibility since it is located in the middle of the
structure and removing it may break socket opts initialization
or parsing.
Change-Id: Ib641ad7d965d68bc9ebb65dba531408d88cf6fa1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement bdev_nvme_reset_controller rpc, which allows the NVMe
controller to be reset over RPC. Implement bdev_nvme_reset_rpc()
which starts the reset of the controller and returns the result of
the controller reset via the callback function after it completes.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Id98d5e56feb315b7e44e9bb5e5f495e9b1cd1de0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Some packages include versioning in their name which is not very
friendly in case given package is upgraded - the name of the package
will always change in such a case. To avoid that, use globbing to
match on package names in a more robust way.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I3e23fc8a06f93471f47835e945c24c4a95f80795
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add exceptions to results parsing and fio run functions
to better inform what's the cause of the failure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I94e51cb8f77515f7d26a75501011d6111820ae56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Enable "kernel_engine" option for Kernel Initiator
class to enable ability to use io_uring engine on
initiator side.
For NVMe-oF this has limitations as apparently it's
not possible to enable polling on the initiator side,
which in turn makes fio "hipri" option also not
possible to use.
Adding #TODO sections with notes in case this is
later fixed in Kernel NVMe driver.
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I31da52946692015237263abc77d8425b5eae5b98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It's useful to determine what's being sent out to the server. This
may be relevant for e.g. openstack tests where currently it's hard
to see what tempest|cinder is actually doing, SPDK-wise, during the
tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie32781621317dd65e3f6fbcfd5110e7dac337f04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the trace files can get very large (several GBs), parsing them
using python's json module might require an unfeasible amount of memory,
as it needs to load the whole file first. The ijson [1] library
provides interfaces for parsing files iteratively, only loading a small
portion of a file at a time.
It requires the input JSON to have the tsc_rate and the definitions of
the tracepoints listed before the tracepoint entries. It's not a big
deal, as this is the way `spdk_trace` generates it, but it's worth
noting, as passing that file through something like `jq -S` might make
it unreadable to the trace script.
[1] https://pypi.org/project/ijson
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I03c0c3fb47091da615a3978b8d63edf4d876b811
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This patch adds support for annotating qpairs. The raw pointer values
are replaced with a list of various properties of a qpair collected by
the bpftrace script.
A line like this:
`0 2856282624.000 RDMA_REQ_NEW id: r3256 qpair: 0x26ba550`
becomes (the line was only broken here):
`0 2856282502.669 RDMA_REQ_NEW id: r3256 qpair(ptr=0x26ba550, thread=2, qid=0, \
subnqn=nqn.2016-06.io.spdk:cnode1, \
hostnqn=nqn.2014-08.org.nvmexpress:uuid:729783b4ab38485d8d767b7741108a8)`
To annotate a trace, one first needs to enable and record the DTrace
probes:
```
$ scripts/bpf/trace.py --record `pidof spdk_tgt` > bpftraces
^C
```
Of course, the probe events are only recorded when the script is
executing, so in order to generate the annotations properly, it must be
started before the annotated objects are created. For instance, for
NVMeoF, it needs to be running before a connection is made.
After the BPF probes are recored, the traces can be annotated:
```
$ build/bin/spdk_trace -p `pidof spdk_tgt` -s spdk_tgt -j | \
scripts/bpf/trace.py -b bpftraces
```
For now, the script only annotates traces from the rdma module, as it's
the only one with tracpoints recording qpair pointers now, but it could
be extended to support more tracepoints.
Similarly, more objects could be annotated in the future by extending
the `SPDKObject` class and defining additional DTrace probe points.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2225f4b1ab266b41af561b5e7d942411cd0c13c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces definitions responsible for generating bpftrace
scripts and parsing its output. That output will be used in subsequent
patches to provide annotations for SPDK traces.
The script has a hardcoded set of probe points that are used to generate
the bpftrace script. They're also checked against the probes present in
code to sanitize them and make sure that they're in sync.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1b8c95e1a035bd7affed2c44b056828a5da94abd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
also remove out of support fedora31
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: I2ec224a3fb3849eb62ba46a01aa74c62926174f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use extended regexp to resolve any potential ambiguity with matching
on '('. This should fix the following failure as seen on the CI:
fatal: command line, '^SPDK_RPC_REGISTER\(': Unmatched ( or \(
Also, since errexit doesn't see failures inside the process
substitution make sure we return from the function with a proper $rc
in case git fails early on.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia03095e9cc8cf11602dafb5bef28265abb485704
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8577
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are currently prone to false-positives especially in terms of
scoping. Consider the following:
foo() {
local bar=(42)
echo "${bar[*]}"
}
bar=43
foo
echo "$bar"
Some versions of shellcheck, including the latest, 0.7.2, complain
about $bar being reused as a plain string here. This is incorrect
since foo() holds its own copy of bar[@] hence the assignment which
takes place outside of it doesn't affect its content.
SC2178 can be mitigated be reversing the order of declaration:
bar=43
foo() { ... }
...
but the SC2128 still remains.
Currently, in our code majority of these warnings are coming from
false-positives due to initial source'ing which most of our test
scripts do (e.g. they fetch a function where local bar=() is used
and in the test itself $bar happens to be assigned a plain string.
This is still valid code).
To mitigate, disable these directives untill shellcheck is capable
of properly interpreting scoping when checking them.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifbde973eae6e261d79e1c340eb28644bce5f4e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SC2030: Modification of var is local (to subshell caused by pipeline)
This directive is raised since the for loop (or rather its contents)
is piped through to another process. In this context it's not harmful
since we are interested only in sending the stdout but since we operate
on variables that happen to be local to the process that handles the
loop shellcheck sees that as a potential issue. To make it happy
remove the pipe and sort pci addresses prior running the loop.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I835c5ac1da9012129c5d01d62880307f70caab1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8501
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a first commit in the series addressing potential Bash issues
as discovered by the latest shellcheck release (0.7.2, shipped with
the very latest fedora33 and fedora34). The goal is to either fix,
locally or globally disable given directive(s).
SC2155: Declare and assign separately to avoid masking return values
Simplify the setting of the variable pointing at the root of the repo.
Also, keep it consistent with the rest of the scripts and declare it as
$rootdir.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I63e0b1a85ce16f7983e9ba6dd985046e8a39a650
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On my system, the git grep for ^SPDK_RPC_REGISTER(
fails because the ( is unmatched. It seems we should
escape it, although clearly our CI systems don't seem
to require it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6412e27e79488616743f76b2d9eac8f62b996078
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This script will use the output generated by the spdk_trace app (JSON) and
replace some of the raw pointers with the information gathered through
the DTrace probes.
For now, this only prints out the traces without doing any annotations,
so the output should be nearly identical to what's printed by
spdk_trace. The annotations will be added in subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I406e8d4fde9cb88b31c38aa96f11b88e607e9436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow to match and compare the DTrace probes with SPDK traces
as they'll be using the same source for the timestamps.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I686c3351428c75f9b618a1a909836504fccad828
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
