And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We need to wait to process this quirk until after we
have a valid CAP register value. Before this fix,
controllers with this quirk would get their io_queue_size
always capped at 2 (min io queue size) because CAP hadn't
actually been read yet.
Fixes: f5ba8a5e (nvme: add NVME_CTRLR_STATE_READ_CAP)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4df87b5dfb0faa21db5b4cf6fc667d80621d1691
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8211
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The inline function can also be used in the coming submit request
function.
Change-Id: If4a5511001e6586dbce0978298beddc537f54d8b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The PCIE and VFIOUSER both can use this function, the only difference
is VFIOUSER should use IOVA=VA to do the vtophys translation, so
here we will move the function to the common PCIe layer as the first
step.
Change-Id: I699edb67a00a2fa534072fc02ac2dd4a27aba8f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8030
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each time the following file
"/sys/kernel/config/nvmet/subsystems/nqn_name/namespaces/ns_id/enable"
on the target side was changed, the SPDK initiator should receive an
async event (type: SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE, info:
SPDK_NVME_ASYNC_EVENT_NS_ATTR_CHANGED).
But actually not.
Since for SPDK, when target sent the non-first event, the condition
"nvmet_aen_bit_disabled(ctrl, NVME_AEN_BIT_NS_ATTR)" that prevents
target from sending event was matched.
This commit fix this issue by issuing a get_log_page cmd for each async
event received, just as the kernel initiator does.
Fixes#1825.
Signed-off-by: tyler.sun <tyler.sun@dell.com>
Change-Id: I2973470a81893456ca12e86ac390ea1de0eed62c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
In order to avoid latency imbalances, the user can specify a cpu mask
on which the poll groups should run. This code update added data structures
to control set of CPU cores.
Change-Id: Iaf69d75da2fc6fed350d97d11027ce09e9432210
Signed-off-by: Yuri <yuriy.kirichok@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5610
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also add scripts/bpf/nvmf.bt to enable and log these
probes.
This patch also adds a script that can generate
a bpftrace script snippet with string maps for
needed enumerations (currently nvmf_tgt_state and
spdk_nvmf_subsystem_state). This allows us to
dynamically generate this from the source code, and
can be extended for other enums we may want to
add in the future.
Thanks to Michal Berger for converting my original
gen_enums.py script into gen_enums.sh!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff34a6218aef40055ac14932eea5fc00e1c8bcf5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7194
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Source Windows specific definitions from common.sh. These adjust
uname to report the operating system as WSL, Msys or Cygwin and the
kernel name as Windows. They also define kill() to invoke the SIGTERM
handler before causing a hard stop with TerminateProcess.
Adjust the ordering of the 'source' commands in autotest_common.sh so
that the config definitions are available when common.sh is loaded.
Define MAKE, MAKEFLAGS and HUGEMEM for Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I130b892ee55c925a0b033bda271a29133993afb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Alternative for the default of $HOME/rpmbuild.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id1feb7207926b518deb87045fc17bb3d1d4c374e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This was added only for testing purposes. Right now it just
unnecessarily makes the build logs bigger and spams the stdout.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id8ff3e1dfde955dc118e0a202897d6c6634c3995
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8194
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 2246a93718.
We are seeing a lot of failure on io_device lookup in the test
pool. These only showed up after this patch was merged and sees
the most likely culprit. Reverting this patch for now while we
continue debug.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2ab098319dfae3a5356eb4fe0dbf9f4af2d2eea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8199
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case IFS was modified in the environment where print_backtrace()
was called, it could impact the cmd substitution used for seq'ing
the main FUNCNAME loop. Example:
========== Backtrace start: ==========
/home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh: line 980: 1
2
3
4: syntax error in expression (error token is "2
3
4")
Avoid that by resetting the IFS to its default value, but also,
replace said $() with arithmetic evaluation to avoid it altogether.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4ab098319dfae3a5356eb4fe0dbf9f4af2d2eea6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This should be vfio-user-master now. vfio-user-v0.6
branch is obsolete.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iaa0b429c4de13c59e1f58fe59149367f941d42f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8062
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In examples/bdev/fio_plugin/fio_plugin, it will include fio.h which
defines the RB_ROOT macro. To workaround the RB_ROOT redefined error,
rename RB_ROOT to _RB_ROOT.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ied4f835e4d1657ca5a0a80c13c72845c774618d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ib3bd382bbeb610503194e7d7bfd569f60a0d0121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7894
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I696870dbdc9fa654e270d9fe76f12b7044455527
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7946
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The original function will disconnect queue pairs first and then free
controller memory finally, so rename it to vfio_user_destroy_ctrlr().
Change-Id: Idc235e4186bd4164be712fc9d4cda4991efc6248
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The coming destroy_ctrlr() function will disconnect
queue pairs and free controller at last, so here
rename the original destroy_ctrlr() to free_ctrlr().
Change-Id: I527b2742142d60b0383be5a12391c77dd50d47a7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The original destroy_qp() only release the queue pair
related memory, and free_qp() will be called inside
destroy_ctrlr() function, so also remove one duplicated
line here.
Change-Id: I2a06a6704b514361685068acda4e65ed5d502f0d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The controller concept in NVMf is like a session, for any
new connection in nvmf_vfio_user_accept() with the endpoint,
we treat it as a new controller, we don't need the `ready`
field in controller to indicate the connection state, we
need the connection state in endpoint, so here just use
endpoint->ctrlr point to indicate the socket connection
is valid or not.
Change-Id: I588dbba7973cb61a1d79d81324a43e052f7dafb0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ZCOPY emulation is not required. Modules can check if the bdev module
supports ZCOPY. If not supported the module uses the existing
READ and WRITE operations.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Idac0a4d27a79a6c7e567c420e15637e826c347c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
If a reconnect fails, we restore the original
transport_failure_reason after we're done with
the failed reconnect. Save the original reason
in the qpair itself rather than a local variable,
to facilitate upcoming changes where connect will
be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20ff43fc687a379aa5c930e17cf3ff8d730320be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8116
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we were only checking trtype==PCIE to
determine whether a controller was fabrics. This
skipped the vfio-user case. So use the new
spdk_nvme_transport_id_is_fabrics() API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81f26853f44b1c47522ce6354e5aa4a905796bd0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8089
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Use the new function in order to reduce duplicated code.
Change-Id: Ie848c7586575b3f0bb617d7e767cf459b43d4783
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8174
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consider this:
foo() { echo bar >&2 ; }
set -x
foobar=$(foo 2>&1)
[[ $foobar == "bar" ]]
The above test will fail since $foobar will also include tracing
strings as stderr is where set -x redirects the output. Since in
some cases this may troublesome, replace stderr with a dedicated
fd allocated dynamically.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia6609e4463b371c07fab42d2bd291c9e43742df5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8158
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function was unintentionally including trace lines in its output
by playing with stderr (where -x is redirecting its output by default).
Avoid that by simply listing the devices and doing proper checks from
within the actual test.
Spotted in https://github.com/spdk/spdk/issues/1973
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If15375aca152aaa49267c9cc51e70fd859685ea1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than to rely on schedulers to access and modify
last_stats values over multiple scheduling periods, move that
operation to event framework.
Providing this to the schedulers in generic manner is better
than enforcing that each scheduler has to keep track of this
data on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Icaf3b4af80d86fafaddf328fd230db9743d21ab5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This UT was not working as intended, and was covered by
scheduler implementation and direct modification
of the lw_thread stats in UT.
A single _reactor_run() iterates over all active pollers.
If at least one returns busy, so does the thread.
Thread load at the begining of UT is not 'low', but 100% busy.
To emulate loads outside of the 100% busy/idle, multiple
spdk_thread_polls need to be exectued.
As such to keep this case simple, the busy poller is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I21b4c607977ed5926e0bb2743c33636cfc49f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At no point in the UT thread and reactor stats
were verified. This patch makes sure that those are
checked and points out a glaring issue fixed in the
next patch.
Please note that spdk_get_ticks() and spdk_delay_us()
increase a single global value, which does not play
well with tests simulating multiple reactors.
As such each round through reactors resets the
global timer and verifies it at the end.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27878fe35c1606ec20c548fe3bb5ede0102c8a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
