This patch changes hardcoded value for target IP to one from
common.sh.
Config file here should be replaced with RPC in the future.
Change-Id: I24ef413fcb9369a74b1db182338b5b41e0874a55
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/406364
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Make sure test case 10000 is always last, since it kills the target app
and makes any tests run after it fail.
This also de-duplicates the test execution code (now the "all" case
just fills out tc_list).
Change-Id: I88b629a1ef17afd4b95a4fd7d0cbf0321238b7a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406677
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The "method" check was looking in the wrong object, so it would always
fail and not call any of the methods.
Change-Id: I4c91428523256912f47dfced95ff53cc1630284a
Fixes: 4c7733618a ("json/rpc: Fix. Support not fully implemented subsystems.")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406659
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia1b26b35a5befbd6e3775bce224a8a9f473426e9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406442
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Don't allow the user to specify an invalid ASCII string for the
controller serial number field.
Change-Id: I1c3acf6997a0afcdbfc03caf9e8d9b5fab429106
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406441
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This must have been overlooked before.
Change-Id: I631c7b926970d045e9e91cada535acd605e05b6e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/406334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsystems enter the paused state when their internal
data representation is changing (i.e. namespaces are
being added, etc.). Queue incoming requests while
in this state.
Change-Id: I51e0c687b5b0f98351faa20dffa57110eb4a9df4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was internally asynchronous already, but make it
explicitly asynchronous so other code can properly
wait on the operation to complete.
This fixes an intermittent CI crash.
Change-Id: I81c9b19673566047dcffa94796236ca9fd7fa7d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406226
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I595f0ec871174557a35811fe3b102c33a5a60ab0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_NOTICELOG should only be used for significant but non-warning/error
messages, such as notifications of deprecated config file sections.
Change-Id: I885dfe839c9cbc9eceabee234e4d0eb74c6910df
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
by placing the destroy function in the callback of the
io_device_unregister, we ensure that all channels associated with a bdev
will be freed before the bdev is destroyed. This eliminates the
possibility of an io_channel callback referencing a destroyed bdev.
Change-Id: I0dd6f53dcfa9c9c5a3c6e98a7e2ad8687da17c3f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406248
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This unit test operated under the assumption that one could immediately
free a bdev after calling spdk_bdev_unregister. This assumption is
broken when we moved the actual destroy call to an asynchronous callback
to spdk_io_device_unregister.
Change-Id: I92d34f7e2e2993bfe9391f9bb72e08128dec74f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This thread is needed in any context when we send a message.
Change-Id: Ifcb5e3bf2e6ee60385b425a976ed380228570ae6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406427
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Split bdevs now can be create using "create_split_bdev". To keep
backward compatibility, this call will not fail if base bdev is not
available yet instead will add base bdev name to its live configuration
and create splits when base bdev will be created (during examin
process).
Change-Id: Ie26ffc0e947f6d88ff56830dd50999795283df2e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/404164
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
No code change - the existing code is moved as-is.
This is the only place it is used, and it is conceptually part of the
virtual controller implementation.
Change-Id: I863f5931225c4d78e515341445e91b29a73da64d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406251
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe-oF subsystems that our target exposes may have multiple
subsystem ports and multiple controllers; report these in the Identify
Controller data structure Controller Multi-Path I/O Capabilities field.
Change-Id: I5f1d4ce91698fe6abd281fdc022b6e3b37efd3ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406244
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Several intermittent test failures have been seen with recent
changes to this test. Disabling it for now while the issue
is debugged further.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0634f182dab3d3d259690981474866a2037c7fce
Reviewed-on: https://review.gerrithub.io/406454
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
IOAT module of copy engine requires config information in the .INI
config file. However dump config text is not supported yet.
Dump config text is legacy feature but this becomes a preparation
for the upcoming JSON config file.
Change-Id: I9b7349cac9c00ca3ce1d944a84cbc445a6f1aec4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/405845
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is a preparation for JSON-RPC and JSON config file.
Change-Id: Ieef3ccfb68405b5d6b98fdfb3f99eafd92bccaf7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/405844
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For application like vhost/iSCSI target/NVMe-oF target/etc,
a new section as below can be added for the QoS rate limiting.
[QoS]
Limit_IOPS Malloc0 100000
Limit_IOPS Nvme0n1 500000
Also added a sample change at test/lib/bdev/bdev.conf.in
Change-Id: I7c7d951fbe1352ca2571f135c657bc4fa43b56c7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393221
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As there is no I/O channel associated with the QoS
bdev channel, add the specific functions to handle
the reset operation on the QoS bdev channel. The
reset operation will be conducted on the QoS thread.
Related UT code on QoS with reset operation was also
included.
Change-Id: Ibba68ddb132fa926fec6327829157b43ac806713
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This enables virtio tests to run with 2MB hugepages
Change-Id: I0f9e2de0cb1f68fb967b929d8a27c6e410cb675a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/404318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add iscsi filesystem test cases(run fio) with
lvol and nvme backend in nightly.
Change-Id: I822e5c570fb9ef96ce63bf1c853c537b35c8b1d7
Signed-off-by: xuhuagen <huagenx.xu@intel.com>
Reviewed-on: https://review.gerrithub.io/405513
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is called max_namespaces in the JSON-RPC method, not MaxNamespaces.
Fixes: 5e98dfd126 ("nvmf: add capability to add namespaces dynamically during active connection")
Change-Id: Ide39d6d6c1c1e12bd9b2ec1d2e619af7213051d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wrapper is currently commented out, but decorate it with @call_cmd
so it is up to date with the rest of the calls when we decide to enable
it.
Change-Id: I56d25fbfb0e06c8b791d75398ee36ce96dfdcfa4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406213
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows Doxygen to recognize and autolink the
spdk_nvme_ctrlr_get_next_active_ns() reference.
Change-Id: I74ec95b1b7120c5359b4543260d7c5fe2ae88fba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I382e1ee5d55e65d22e273e2fa248f6b73cd5934b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use RPC to add/remove a namespace to/from
existing NVMe controller, SPDK NVMeoF target will
generate an asynchronous event as an indication to
host when asynchronous event request is available.
While here, we also set the event with invalid log
identifier, so that the host doesn't need to clear
the event. Users can use Set Feature to disable
such event.
Change-Id: I93c4d752f552d3c86c53e80877aa61c093e167cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/398759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently construct_error_bdev() fails if the base bdev doesn't exist.
This patch add configuration of the error vbdev for the base bdev instead,
and the configuration will be parsed at examine() when the base bdev is
created.
This will improve the usability of error injection for bdev and will be
usable for the upcoming JSON config file.
Change-Id: I550b7f6c74fd8ab6cbd424a192f12a0c0099028e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/403914
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All errors were being silenced in an upper virtio layer.
This patch makes them properly propagate further.
Change-Id: I289c810ff0f670c4ba1fbcf0804089639fa561a8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405918
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This protects against brute-force initialization that virtio
is not really prepared for. Most importantly, this behavior
makes us Virtio spec compliant (3.1 Device Init.).
Change-Id: I6d26f3d8b5cce488a71068777531b78538489662
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/405917
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
First save the list of run / not run tests to file for
easier re-use later and then print to screen.
Change-Id: I1cb4ea057a75f08cac43853299f509d03b299709
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/405222
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
