Previously the accel_perf tool would look at whether it had HW
or SW commands to know whether to execute the callback right away
or schdule to avoid blowing the stack (SW calls are sync).
Moved this to the SW module (part of the accel engine) so the
caller doesn't have to worry about. Allowed for a few simplifcations
in the tool as well.
Also, instead of using send_msg to call the completion we add it to
a list in the sw module that a new poller uses to perform the
completions as this is more efficient the sending a message to the
same thread.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifc6c5b8635f51e3fa1a825c8573378b3752d7d91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9171
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Small but noticable on perf top. We were using a list to track
valid batches and checking it on every submission. Instead just
put a valid channel ptr in the batch struct and clear it when the
batch is freed. There was no other reason for the list.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia26ceee578be4a82f4fd8abb2358ff18c56271a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9149
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This may be used by CI to determine which version of the SPDK the
refspdk should be built against. The default of using the latest tag
is not changed.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia114bea163fb291d1a59069d34e62005865b04bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to track if governor was enabled during
initialization of the scheduler dynamic.
Instead _spdk_governor_get() can be used to determine that.
While here set the default g_governor to NULL.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibdfde3d2714dd0b6d629f19f0d246b4fc3c9d214
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch cleans up the header file, structures and
parameters of governor API. While documenting the
functionality.
- made governor name const
- renamed _spdk_governor_list_add() to _spdk_governor_register()
This is preparation to making this API public.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie394109c839dead0e7ade946f95be8105b00e674
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch cleans up the header file, structures and
parameters of scheduler API. While documenting the
functionality.
- made scheduler name const
- removed typedefs for schedueler callbacks
- balance() now accepts uint32_t for array size instead of an int
- removed unused _spdk_lw_thread_set_core()
- renamed _spdk_scheduler_period_set() to _spdk_scheduler_set_period()
- renamed _spdk_scheduler_period_get() to _spdk_scheduler_get_period()
- renamed _spdk_scheduler_list_add() to _spdk_scheduler_register()
This is preparation to making this API public.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia7b6b6a5eafb052ac275db6c04113a8ad442383f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8842
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Registering multiple governors would fail due to them having
the same name. Only saved by the fact that right now,
there is only one governor registered in this fashion.
Fix it by adding name of the governor structure passed
to the function name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic7a206da2c8f5dc1e72e41629bccf989c030f182
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
By default g_scheduler is now NULL. It can be set
either by event framework or RPC.
To keep RPC consistent, the 'static' scheduler was kept.
All access to the g_scheduler is done via _spdk_scheduler_get().
Access to its members is done to balance, get name for RPC and
through _spdk_scheduler_set(). All of them happen on scheduling
reactor and don't pose race condition when changing scheduler.
There is no need to delay init/deinit of scheduler via g_new_scheduler.
This variable was removed and all that happens in _spdk_scheduler_set().
To unset and deinitialize current scheduler,
_spdk_scheduler_set(NULL) has to be called.
This results in moving scheduler deinitalization to that
call too.
Every spdk_scheduler callback is now mandatory.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1fed766989de9bcaeb7e82b490c1275f3572d77d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8811
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By default g_governor is now NULL. It can be set
either by event framework or schedulers directly.
Dynamic_scheduler and gscheduler specifically want
to use the dpdk_governor, so their initialization
now sets it explicitly.
To unset and deinitialize current governor,
_spdk_governor_set(NULL) has to be called.
This results in moving governor deinitalization to that
call too.
The "default" governor has been removed.
Every spdk_governor callback is now mandatory.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibf76bd28bfbb159416026996fa217bb3325a3d31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8810
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
There is no explicit need for the spdk governors initialization
to occur on per core basis.
This implementation detail for dpdk_governor is now hidden
in the init/deinit calls. There is no recourse when failing
deinit for a certain core, so ignore the return code.
Changed return type for deinit in governor and scheduler to void.
While here modified the callbacks for scheduler to no
longer require passing currently selected governor as an argument.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7f0b7a09aa7f5d12ae47fca25186faeedac31a95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Add the new device ID for VMD devices so VMD devices
can be unbound and used with the SPDK setup script.
Bus numbering for VMD devices is different on IceLake platforms,
and only half of the bus numbers are available. Add a function to
set the starting bus number and the max bus number by reading the
new BUS_RESTRICT_CAP and BUS_RESTRICTIONS VMD registers.
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Change-Id: I8905d4bcba84c74e3dadfb27262e668c4281b0c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When deleting an IO qpair, make sure that it's connection process is
finished (i.e. create CQ/SQ commands are completed) before freeing it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I487dcef390d73ff4a7264ff97d965c9030916840
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9279
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_nvme_create() is called only by a single caller and hostnqn is
just copied to ctrlr_opts even if it is passed separately.
Hence include hostnqn into ctrlr_opts rather than passing it as a
parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75b640bcecefa94950b0c19936fab0571c428125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9332
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will have two similar features, multipath and
failover when it supports multipath.
Take a case that we add two different trids with the same name by the
bdev_nvme_attach_controller RPC as an example.
The failover adds secondary trid to an existing nvme_ctrlr. The multipath
feature creates another nvme_ctrlr and adds it to the same nvme_bdev_ctrlr
which has an existing nvme_ctrlr.
We want to use bdev_nvme_attach_controller for both failover and multipath.
To do it cleanly, separate callback to spdk_nvme_connect_async() between
creating ctrlr and setting failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id9bc175af6201cdd74e12d4903fc81afe4f91189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9225
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We get ext_opts by getting spdk_bdev_io from nvme_bdev_io in
bdev_nvme_readv() or bdev_nvme_writev() now. But this is not aligned
with the current design pattern and not so efficient.
We pass contents of bdev_io via parameters to bdev_nvme_readv() or
bdev_nvme_writev().
Let's follow it about ext_opts.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a43f31934a36fa2d43800ec8bf17916edfca477
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9292
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This allows for creating admin qpair in an asynchronous mode and I/O
qpairs based on what the user specified in spdk_nvme_io_qpair_opts.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1801ea76d5a08b1bdc558eb0f18648f59454b654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9077
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Split the connection process across two states, which allows the
transport to connect the admin queue asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie84477331df0abf5ffdfc2a0ff5d5ada760c9e73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows for submitting IO requests before the CONNECT command is
sent and not stopping the connect process due to the CONNECT being
queued. It could happen once IO qpair connection is asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04e45b1c2f49f9da3412c843ea899341c56a0420
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8624
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will allow us to call `connect_qpair_poll()` from
`process_completions()`. Otherwise, `nvme_fabric_qpair_connect_poll()`
which calls `process_completions()` might create a loop, which can cause
issues with `nvme_completion_poll_status` used for tracking the CONNECT
command by the fabrics code.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibd67bc3e011b238db264394e005b3268624cceef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The fabric connect command is now sent without. It will make it
possible to make `nvme_tcp_ctrlr_connect_qpair()` non-blocking too by
moving the polling to process_completions (this will be done in
subsequent patches). Additionally, two extra states,
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_SEND` and
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_POLL`, were added to keep track of
the state of the connect command. These states are only used by the
initiator code, as the target doesn't need them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25c16501e28bb3fbfde416b7c9214f42eb126358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions will allow for sending the connect fabric command
asynchronously.
Additionally, this patch changes the return code for
`nvme_fabric_qpair_connect()` when a timeout occurs from -EIO to
-ECANCELED. It gives better description of the error as well as make it
more consistent with `nvme_wait_for_completion*` APIs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I95806626d3573ebe4b1568157fd57013c4b909a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8604
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the connect will be completed asynchronously, we
need to keep the pointer around so we can access (and
free it!) later when the command completes.
Also change the code to poll on the status using the
new nvme_wait_for_completion_poll(), as prep for upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I28add8f967fd000afed1e50e491a16ea9da16c22
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This gives us a context that we can poll on when using the
nvme_wait_for_completion framework for async operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b23f9096eed5ce95848d1995c1ed0b4c74edc92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8602
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
MD038 - Spaces inside code span elements
Fixed all errors
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8a776869f7b9580078b4aa8a149ec7017f63878d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9270
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD035 - Horizontal rule style
MD036 - Emphasis used instead of a header
MD039 - Spaces inside link text
MD047 - File should end with a single newline character
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I92ad6be4bfc5496e29504f052893ccdcb5ade11b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9267
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When an abort command completes successfully,
cdw0 bit 0 may be set to indicate that the controller
was unable to abort the specified cid. In that case
the bdev nvme abort completion callback needs
to reset the controller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I42a5e96e19e113c38dec67c2d8575a11f39d41a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9320
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Adds a window clear for the tab area after switching to another tab.
This is to avoid possible artifacts from previous tab after switching.
Added a column description redraw after the clear.
Fixes#2053
Change-Id: I204410096e5f2401938a36a8f29a09904eca83a8
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9312
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
MD032 - Lists should be surrounded by blank lines
Fixed all errors
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Idd18d38386c0150f5d68068a59717a34d4e1d991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9142
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
MD030 - Spaces after list markers
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I6dd7f88da713f3f010ba84827524420de34dffd7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9141
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
MD029 - Ordered list item prefix
Set style to 'ordered'
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If2068d88f90fb8324714ea3a2bd8bfa447d9df58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9140
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD027 - Multiple spaces after blockquote symbol
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I14b74e83bd7558384ac50387a708ed639b78ad51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9138
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
MD026 - Trailing punctuation in header
Fixed all errors
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I5e73356c7a573f1194f56386ca477d57e56a26f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9137
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
MD025 - Multiple top level headers in the same document
Fixed all errors
Update check_format.sh to fit new header style in jsonrpc.md
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib5f832c549880771c99c15b89affe1e82acd3fa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This fixes unit test failure caused by 4ac203b2d, which changed the way
asynchronous events are reported to be on a per-process basis.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I150de552bb4be5e184d6eb518abf89f83de106eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9308
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Modified the async_list to be per-process instead of
on the controller object. This allows an NVMe multi-
process setup to have Asynchronous Events Reported
to each process that may interested in them. In the
previous case, where the async event list was on the
controller object, AER (Async Event Requests) would
not be reported to all the processes.
Fixes: #1874
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I3e885c0cf5a0fd471d243bc7d96a8b7ffe65d14b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8744
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add information of in_interrupt of reactor in spdk_top.
Change-Id: Ie461c2ddfb0e6b13fa37485980d16fb2a2fdf941
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reservation commands aren't supported for vfio-user transport,
we should return error in case VM send such commands intentionally.
Also don't use one err variable for multiple functions return values.
Change-Id: Ie0d51ce3c85a1b8ef80c678a3ec9fb6523bab462
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9125
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only one active socket connection is supported in libvfio-user,
RESERVATION should not be supported in this case.
Change-Id: I36a746f479da767d857425e84dfed5f2bef30b17
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9124
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Converted log message to debug that is called too many times
during a hot remove, filling up the log file.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I08f7ff7c36c6388270878291df8a1e83646e8aee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When a bdev is being unregistered, after all
channels have been closed, the bdev layer calls
the module's destruct callback for the bdev before
calling the bdev unregister callback.
For the rbd module, the destruct callback is
bdev_rbd_destruct. This callback unregisters the
rbd io_device which is an asynchronous operation.
We need to return >0 from bdev_rbd_destruct to
inform the bdev layer that this is an asynchronous
operation, so that it does not immediately call
the bdev unregister callback. Once the rbd io_device
is unregistered, we can call spdk_bdev_destruct_done()
which will trigger the bdev layer to finally call
the bdev unregister callback.
Without this fix, deleting an rbd bdev would
complete before the backing cluster reference
had been released. This meant that even
if you had deleted all rbd bdevs, there might still
be cluster references in place for a short period of
time. It's better to wait to complete the delete
operation until the cluster reference has been
released to avoid this issue (which this patch
now does).
Fixes issue #2069.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ac156c89d3e235a95ef196308cc349e6078bfd7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9115
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The bdev layer doesn't call the destruct callback until
all channels have been released, but because the channel
delete callback passes message to the main thread, we can
end up with a complicated race condition. Currently we
have a deferred_free code path to handle this race, but
we can handle this a bit more cleanly by doing the
construct operation on the main_td as well.
This also simplifies the next patch which will
asynchronously destruct the bdev to fix an RPC bug.
Here's the race:
1) first channel was created on thread A, so disk->main_td = thread A
2) second channel was created on thread B
3) first channel is freed (but disk->main_td is still thread A)
4) spdk_bdev_unregister is called on thread C
5) bdev layer gives callback on thread B to upper layer
6) upper layer on thread B frees channel
7) bdev_rbd_destroy_cb runs on thread B and has to send msg to thread A
for processing
8) bdev layer calls bdev_rbd_destruct on thread C (since step #4 was on
thread C)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I25ede2dc56e24dac0919aed05b9def2560823ee7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9158
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Since SPDK supports DPDK version older than 21.02
which introduces mlx5_pci PMD, we should check
DPDK version in use before enabling build of DPDK
libraries.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie86a055bfd079f0b0595649a5d6f60d23e1b1185
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9257
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update submodule DPDK to version 21.08 and modify
CHANGELOG.
Added bus auxiliary dependencies to dpdkbuild/Makefile
and lib/env_dpdk/env.mk. This dependency was introduced
in DPDK 21.08.
Change-Id: I72d9fde456583dc129f4c7fced4f10875bbc38e2
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9211
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
