Previously the accel_perf tool would look at whether it had HW
or SW commands to know whether to execute the callback right away
or schdule to avoid blowing the stack (SW calls are sync).
Moved this to the SW module (part of the accel engine) so the
caller doesn't have to worry about. Allowed for a few simplifcations
in the tool as well.
Also, instead of using send_msg to call the completion we add it to
a list in the sw module that a new poller uses to perform the
completions as this is more efficient the sending a message to the
same thread.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifc6c5b8635f51e3fa1a825c8573378b3752d7d91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9171
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch cleans up the header file, structures and
parameters of governor API. While documenting the
functionality.
- made governor name const
- renamed _spdk_governor_list_add() to _spdk_governor_register()
This is preparation to making this API public.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie394109c839dead0e7ade946f95be8105b00e674
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch cleans up the header file, structures and
parameters of scheduler API. While documenting the
functionality.
- made scheduler name const
- removed typedefs for schedueler callbacks
- balance() now accepts uint32_t for array size instead of an int
- removed unused _spdk_lw_thread_set_core()
- renamed _spdk_scheduler_period_set() to _spdk_scheduler_set_period()
- renamed _spdk_scheduler_period_get() to _spdk_scheduler_get_period()
- renamed _spdk_scheduler_list_add() to _spdk_scheduler_register()
This is preparation to making this API public.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia7b6b6a5eafb052ac275db6c04113a8ad442383f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8842
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Registering multiple governors would fail due to them having
the same name. Only saved by the fact that right now,
there is only one governor registered in this fashion.
Fix it by adding name of the governor structure passed
to the function name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic7a206da2c8f5dc1e72e41629bccf989c030f182
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
By default g_scheduler is now NULL. It can be set
either by event framework or RPC.
To keep RPC consistent, the 'static' scheduler was kept.
All access to the g_scheduler is done via _spdk_scheduler_get().
Access to its members is done to balance, get name for RPC and
through _spdk_scheduler_set(). All of them happen on scheduling
reactor and don't pose race condition when changing scheduler.
There is no need to delay init/deinit of scheduler via g_new_scheduler.
This variable was removed and all that happens in _spdk_scheduler_set().
To unset and deinitialize current scheduler,
_spdk_scheduler_set(NULL) has to be called.
This results in moving scheduler deinitalization to that
call too.
Every spdk_scheduler callback is now mandatory.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1fed766989de9bcaeb7e82b490c1275f3572d77d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8811
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By default g_governor is now NULL. It can be set
either by event framework or schedulers directly.
Dynamic_scheduler and gscheduler specifically want
to use the dpdk_governor, so their initialization
now sets it explicitly.
To unset and deinitialize current governor,
_spdk_governor_set(NULL) has to be called.
This results in moving governor deinitalization to that
call too.
The "default" governor has been removed.
Every spdk_governor callback is now mandatory.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibf76bd28bfbb159416026996fa217bb3325a3d31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8810
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
There is no explicit need for the spdk governors initialization
to occur on per core basis.
This implementation detail for dpdk_governor is now hidden
in the init/deinit calls. There is no recourse when failing
deinit for a certain core, so ignore the return code.
Changed return type for deinit in governor and scheduler to void.
While here modified the callbacks for scheduler to no
longer require passing currently selected governor as an argument.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7f0b7a09aa7f5d12ae47fca25186faeedac31a95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Add the new device ID for VMD devices so VMD devices
can be unbound and used with the SPDK setup script.
Bus numbering for VMD devices is different on IceLake platforms,
and only half of the bus numbers are available. Add a function to
set the starting bus number and the max bus number by reading the
new BUS_RESTRICT_CAP and BUS_RESTRICTIONS VMD registers.
Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Change-Id: I8905d4bcba84c74e3dadfb27262e668c4281b0c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The fabric connect command is now sent without. It will make it
possible to make `nvme_tcp_ctrlr_connect_qpair()` non-blocking too by
moving the polling to process_completions (this will be done in
subsequent patches). Additionally, two extra states,
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_SEND` and
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_POLL`, were added to keep track of
the state of the connect command. These states are only used by the
initiator code, as the target doesn't need them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25c16501e28bb3fbfde416b7c9214f42eb126358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Only one active socket connection is supported in libvfio-user,
RESERVATION should not be supported in this case.
Change-Id: I36a746f479da767d857425e84dfed5f2bef30b17
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9124
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cleaning up the API, implementations were removed in 7dbe0e7c.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Iae25bbb301da123f9e784678d4c4f0b8d39f262e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9221
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
fini_start() is called for each bdev module before
iterating over all unclaimed bdevs to unregister them.
This allows bdev modules to behave differently during
each such unregister. Ex. unloading lvol store when
all lvol bdevs on it are unregistered.
Another use of this callback is to unclaim all bdevs
that can be at that point. Especially ones that will
not receive callback due to no bdev registered.
Ex. offline raid bdev, when some underlying bdevs are missing.
fini_start() being synchronous does not help in cases
where to release claim on the bdev, an asynchronous operation
is required. Ex. lvol store with no bdevs present, requires
async lvs unload to be called.
This patch adds async_fini_start flag for the bdev modules,
to be used when async fini_start is required. When done,
bdev module has to call spdk_bdev_module_finish_start_done().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63438b325d4cc53fd236bf9ff143abf6bdd81c49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9094
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Clarified API in spdk_bdev_module related to init/fini/examine.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia41f9b13d30736e9175717fb516f228440b0a8a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9179
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The pcie layer can't always detect bad addresses
in the request at submission time - for example,
the transport may not have any trackers available
and the request gets queued at the generic
nvme level.
So this means that we might detect vtophys failures
during submission time, or in a process_completions
context - the latter happening when we complete
one request which triggers submitting a new request.
Currently if the vtophys failure happens during
submission context, we return -EFAULT to the
caller *and* call the completion callback. Nowhere
else in the driver do we do both - the intention
has always been that you get one or the other.
So make all of this consistent by tagging the
tracker and the qpair with a flag if we hit a vtophys
error in the submission path. Return 0 to the caller,
who will then later get a completion callback for the
bad request when the qpair is next processed for
completions.
I considered a separate TAILQ to hold these 'bad'
trackers, but that would have required duplicating
quite a bit of the tracker completion code for this
one case. The flag on the pqpair is already in the
hot cacheline, so it's cheap to check it. We will
only interate the outstanding_tr list when that flag
is set, so this should have zero impact to performance.
Fixes issue #2085.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I60b135fb32d899188e51545b69feb1b27758fd7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9234
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Memory domain is used to describe memory which belongs to
another address space (e.g. GPU memory or host memory)
Memory domain can be configured with callbacks to translate
data to another memory domain and to fetch data to
local buffers.
Memory domains will be used in extended
bdev/nvme API added in the following patches.
Change-Id: I0dcc7108a4fbf416a11575aa5cf5d7ec501b3d8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It's already defined in spdk_nvme_ctrlr_data, just move it out
so that other library can use this definition.
Change-Id: Ic40ba6f6e7870395ad3cec9511ce841f5dc4dff1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9123
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds a note for JSON objects and arrays inside struct spdk_json_val.
Additionally deletes double space in section about len field.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5d52b37a7e8023df09e16cbf9805bd6775abc5c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Split the NVMe controller reset into pre-init and reinit stages so
that the latter begins with a call to nvme_ctrlr_process_init(),
returning -EAGAIN if the controller is not yet ready so that a poller
can call it again later.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Ia182b04e438241b139109be93f3ed858fac7f3d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is first commit that should go into latest SPDK
after the code freeze for SPDK 21.07.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib8c7a0e9d8594271119e4c9d0340528003798a92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implemented nvmf code to allow transports to use ZCOPY. Note ZCOPY
has to be enabled within the individual transport layer
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I273b3d4ab44d882c916ac39e821505e1f4211ded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In rte_power all that enabling/disabling turbo does is allows
for additional entry in frequency array for particular core.
Instead of exposing this API through spdk governor,
just make sure that dpdk_governor enables turbo by default.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I994b326a57c01889bccea26635753c56637259d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those calls went unused, in favor or much more useful
up/down/min/max variants.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I432896196a1a6edfc6799c8658df49567f73d457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_governor_capabilities added lots of capabilities
which went unused, suposedly to mark which callbacks
a governor had implemented.
This made little sense, since capabilities are per core and
not implmenting this APIs made little sense.
With this patch spdk_governor_capabilities is brought in
line with rte_power_core_capabilities.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I85296fce2999cb41957162b63ee13d86a0be919f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8787
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove _spdk_scheduler_disable() to avoid confusion as there is
no spdk_scheduler_enable function. Since spdk_scheduler_disable
sets scheduler period to 0, use spdk_scheduler_period_set(0) instead.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4f1390a635f80e8b92775aa4be2e37f5b95467f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
There is only one g_scheduling_reactor (main core), the is_scheduling
flag for it is used to block starting new gather_metrics before
previous one is finished.
Meanwhile is_scheduling flag on other reactors was used to block
destroying lw_threads while scheduling happens. It was only needed
because scheduler interacted with the same lw_thread pointers as
each reactor. Previous patch removed this dependency, instead
spdk_thread ids is used. If an spdk_thread is destroyed,
while scheduling _threads_reschedule_thread() handles it.
It is no longer required to block destruction of lw_threads
based on this flag.
Instead of using the main core reactor flag, a g_scheduling_in_progress
is introduced.
Removed _spdk_get_scheduling_reactor() and instead shared the value
of g_scheduling_in_progress between reactor.c and app.c.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica57326a552477add522174cc3e96b3bab918350
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8732
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Removing dependency on schedulers to directly modify
lw_thread field structures will help making schedulers
truly plugable.
Instead of using lw_thread, new structure is created
that holds copy of stats and refer to the thread by
spdk_thread id.
As an added benefit of not changing lw_thread directly,
we won't run into issue of balancing function changing it
while other reactor removes and frees it.
In the future an API will be added for scheduler to call
in order to move the thread directly. Rather than for
event framework to rely on modified core_info/thread_info
structure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f85bb8dc080fd13b78b07ee9ef8e8be7051659b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8411
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We've always used `dst` as the destination for CRC result, with
the recent addition of a copy_CRC API `dst` was needed for the
copy destination and `crc_dst` was used for the CRC. This
patch just makes all the CRC functions use `crc_dst` to avoid
confusion. The accel_task struct also has a `crc_dst1 field,
that will be used consistently in the next patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia84c4a9e7940c6ebd31410c12272bd22b0c6dd29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Support in accel_perf is coming up in a later patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I63a1d3b9b1a3254fdca78e27c473b9b3468c93c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We find a few files to get the size of a member of a struct. How to
do it is a little complex. So add a macro to do it will be helpful
to read the current code and develop new features.
lib/dif had used member_size() internally but Linux use sizeof_member()
as the macro. Besides, SPDK have used upper case letters for similar
macros, SPDK_CONTAINEROF() and SPDK_COUNTOF(). Hence spdk_member_size()
may be good but propose SPDK_SIZEOF_MEMBER() as the macro.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2179c845a3b75fb71aa039075cc4dfd30617b898
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8738
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
NVMe bdev module manages ANA log page itself now. So NVMe driver
should disable managing ANA log page.
Add a new option disable_read_ana_log_page to struct spdk_nvme_ctrlr_opts.
Then NVMe bdev module enables it when calling spdk_nvme_connect_async().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5249efe90a4d50763c3a7eaa1eb9572f60fbc8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bit 1 in the CMIC of the Identify Controller Data Structure specifies
if the NVM subsystem may have multiple controllers or not.
However, multi_host indicated a particular use case such that the NVM
subsystem is used by multiple hosts.
multi_ctrlr will be more appropriate.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0246096a5cc44721aeff3ff6f96473a2abe11964
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8719
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no point in producing USDT probes in unit tests and it breaks
the build on some systems:
ctrlr_discovery_ut.o(.note.stapsdt+0x14): error: relocation refers to local symbol "" [102], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x90): error: relocation refers to local symbol "" [108], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0xf8): error: relocation refers to local symbol "" [110], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x15c): error: relocation refers to local symbol "" [112], which is defined in a discarded section
Fixes issue #2027.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic6dad60df1f7dccb7f99777ebc4435c618cb505a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Now that multiple trace entries can be chained together to form a larger
argument buffer, we can reduce the size of a single entry back to 32
bytes, while still allowing the user to pass multiple parameters.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic92a1413498df28a8561a13c0f06d895d0af2cc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
