The code is clearer if this function is incorporated
into its only caller.
Change-Id: I33901cddf80ae27896b2acfd1b9e7d212f21f5f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is resolving the address and route to the target, not
binding a socket to an address.
Change-Id: I80055481ed2e020410a1e186a4e7371b60faaee9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
They were very close to the same already, so finish the job.
Change-Id: Ifba9e3b2d11a3e70cbfbe46f57a67552db2757ed
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We should be sending the bounce buffer's remote key to the target so it
can put it into an RDMA SGE on the remote side.
Change-Id: Icded155ad2292c67baa722f001c9c07178bc2754
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is no particular reason for this to be 127; make it 128 to at
least be consistent with the PCIe transport.
Change-Id: I60500e0044d3549ba6350e1f35f09d624848bd21
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function was only called from one place and saved no
lines of code.
Change-Id: If5e653732df57c1f2c93e20cf4f286eac31df91c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The __builtin_expect(), as written before, would have generated the
right branch taken/not taken condition, but the return value was the
opposite of the cond value.
We need to double-not the value to convert it to a 0/1 value while
preserving its original 0/non-zero sense.
Change-Id: I38101ff3ed8e89fc6516cfcdf7d642651545e4ff
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This matches the behavior of nvme_pcie, which queues a request if no
tracker is available.
Change-Id: Idbf6c951c89451cfea22ec6bc553ff46f988f818
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the caller pre-allocate an rdma_req and change req_init() so it
only does initialization, not allocation.
This is necessary to distinguish between rdma_req allocation failure and
other types of failures, which will become important in future patches
when requests will be queued if rdma_req allocation fails.
Change-Id: Ie6edebc1b5f05001b42fc959a29ce0ea6875e41e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the control flow and match the name of the function to its
purpose.
Change-Id: I65bad7e3b2ef710ca29eff9799b8dcaae3999315
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the qpair construct functions private to the transports - it
doesn't need to be called from generic code.
Change-Id: I5f730a4bcf60ce231fe27bc8f4c3c39cb647dd2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a transport callback to return the maximum queue size, and enforce
it in the generic nvme_ctrlr layer.
This allows the user to tell what io_queue_size was actually selected by
the transport via the ctrlr_opts returned during attach_cb.
Change-Id: I8a51332cc01c6655e2a3a171bb92877fe48ea267
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Equivalent to commit 6ab28a201b except now
for commands instead of responses.
Change-Id: Ibe4382dc0f65c1b90c2cee2ad285bbdd21b96a89
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The only field of bb_sgl that was actually used is lkey, and that is
already stored in bb_mr.
Change-Id: I790369a06ce223f88e356df20a9d9a74a93ff225
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This also changes the default listen address from 0.0.0.0 (accept any
connection) to 127.0.0.1 (accept only connections from the local host).
Change-Id: I3de09c582c95126d240795550a56be7aedea639c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch will make sure the information will show up
on console immediately.
Change-Id: I0080866a40de35fb9deef840551ff212759b0191
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Generate the full discovery log page in a memory buffer, then copy just
the requested part of it for each Get Log Page call.
Change-Id: I12730c59c0395cdac57aaab96337e938952e3011
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Refactor the discover log page processing into a loop that calls a
function for each log page entry. This sets us up to add support for
multiple Get Log Page calls to handle larger discovery service lists.
Change-Id: I85676ada375d0dadda2a3f4ab6331123ac7aaf60
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Note that the offset is not actually used yet, just sanity checked.
Change-Id: I9464dc934e94e3d38ac0d474fce876552650f92b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows hosts to determine when the discovery log page has changed
when reading it across multiple Get Log Page calls.
Change-Id: I3c3459959c6246a88938e4f82e3e0046419e7d00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This keeps the existing subsystem list (and therefore the discovery
service log page) in order when new subsystems are added dynamically.
Change-Id: I071639be0fef4139f8f017b433185c786ae55378
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Default is still 1024 2MB huge pages, but user can
override this by setting a different value in the
environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d189d3a71f474469a44b6eb41b4443591863f3c
This isn't used yet in the NVMe library, but it will be necessary later
for supporting non-IPv4 addresses.
Change-Id: I167ce63ad25b0e0c9aa192b12d764c8d078e67f9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This better describes what the field controls (it does not affect the
admin queue size).
Change-Id: I851ae46fb4ed0fce819af07ae235824e0fc817e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For requests split in _nvme_ns_cmd_split_request() the payload offset is
set after children are created using recurrent call _nvme_ns_cmd_rw().
This makes impossible to reset SGL to proper offset in
incomming patches that split non-PRP complaint SGL requests.
To change this the payload offset is set after each request is allocated
in _nvme_ns_cmd_rw() not in _nvme_ns_cmd_split_request().
Change-Id: I9d3b2e3bbd9d93a4c8a37e1db8c4e01276e2cacb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I445790f9802292971256cf821d9730814c95a073
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is preparation for handling non-PRP compliant SGL.
Change-Id: I49c3745498411c5ff9e17cd08f181d4d434c2d08
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Comply with the definition format used by other bdev
modules
Change-Id: Iac108bac540687b32fea4bb70374c22534c60aa0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The vendor ID for Intel shoudl be "INTEL", according
to the following page:
http://www.t10.org/lists/vid-alph.htm#VID_V
Change-Id: Ib9611e5604c8b5e3eaec8101548aaf4a3c45597a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
