Allow user to add something like:
log_flags=nvme,nvme_vfio
to their fio config file to enable log flags. On
DEBUG builds, setting at least one flag will also
set the print_level to DEBUG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a409445d23c96845bc7afa9641966a964b7f44f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9871
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow user to add something like:
log_flags=app_config,nvme,bdev
to their fio config file to enable log flags. On
DEBUG builds, setting at least one log flag will
also set the print_level to DEBUG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I383512e47ad6ea86b8b2c71a212bdc88fadf2f65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previous patches (5363eb3c) tried to work around the
32-bit unmap and write_zeroes LBA counts by breaking
up larger operations into smaller chunks of max size
UINT32_MAX lba chunks.
But some SSDs may just ignore unmap operations that
are not aligned to full physical block boundaries -
and a UINT32_MAX lba unmap on a 512B logical /
4KiB physical SSD would not be aligned. If the SSD
decided to ignore the unmap/deallocate (which it is
allowed to do according to NVMe spec), we could end
up with not unmapping *any* blocks. Probably SSDs
should always be trying hard to unmap as many
blocks as possible, but let's not try to depend on
that in blobstore.
So one option would be to break them into chunks
close to UINT32_MAX which are still aligned to
4KiB boundaries. But the better fix is to just
change the unmap and write_zeroes APIs to take
64-bit arguments, and then we can avoid the
chunking altogether.
Fixes issue #2190.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23998e493a764d466927c3520c7a8c7f943000a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9737
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Restore the previous nice idea and unify canceling pending resets
into bdev_nvme_complete_pending_resets().
cb_arg of spdk_for_each_channel() was reserved for a different
purpose but it was gone.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c01051ae9d8eccc7fc3ec485dd344ff9f55087b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9815
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The all setters of the reset_cb_fn use boolean as the result eventually.
Using boolean as the result earlier makes the code simpler and the
following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ec4f670ed7a000a824ab7e261bab07a3dc21f43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9814
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_admin_passthru() chooses the first ctrlr which is not failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If41a1d1e1bde4bddfa92e5a385509daa3f0ce4de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_admin_passthrough(), bdev_nvme_reset_io(), and
bdev_nvme_abort() do not use io_path. So simply fall through even
if the optimal io_path is not found for these, and clear the
cached io_path for these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26fcbf99c95bbfb6e825c1b7c6455241c198d92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9675
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even if the NVMe bdev module supports I/O retry, it will not retry reset or abort.
For clarification, bdev_nvme_reset_io() and bdev_nvme_abort() call
bdev_nvme_io_complete() themselves for error cases.
For bdev_nvme_abort(), we do not need to differentiate error processing
among return values. Simply complete the request with failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5d51cbba47c6360a6177efd7d5f2e978c48ee9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even when I/O retry is supported, reset will not be retried. However,
bdev_nvme_io_complete() will process I/O retry. Hence inline
bdev_nvme_io_complete() into bdev_nvme_reset_io_complete() to exclude
reset from I/O retry. The result of reset is success or failure, so omit
the -ENOMEM case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I667e74cbbac4a13cefb6896f898476ba48bcd0fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9687
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Save the io_path to which the current I/O is submitted into struct
nvme_bdev_io to know which io_path caused I/O error, or to reuse it
to avoid repeated traversal.
Besides, add a simple helper function nvme_io_path_is_available() to
check if the io_path can be reused.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idadd3a3188d9b333b335ea79e20a244aa0ce0bdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9296
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We have io_path structure now and returning io_path rather than
ns and qpair match the function name. The following patches will
cache the returned io_path into nvme_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d773da18591fc324667f6b5c489a38f497bf3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the critical limitation that ctrlrs which are
aggregated need to have no namespace. After this patch, we can
add multiple namespaces into a single nvme_bdev.
The conditions that such namespaces satisfy are,
- they are in the same NVM subsystem,
- they are in different ctrlrs,
- they are identical.
Additionally, if we add one or more namespaces to an existing
nvme_bdev and there are active nvme_bdev_channels, the corresponding
I/O paths are added to these nvme_bdev_channels.
Even after this patch, ANA state is not utilized in I/O paths yet.
It will be done in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15db35451e640d4beb99b138a4762243bee0d0f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
seems it is not required, string is used instead enum
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ic67af6cfa6f8e22a6593f904cd5b5c1b51cae6ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Pointer 'ctx->req.multipath' returned from call to
function 'strdup' may be NULL. Reported by Klocwork.
Change-Id: Id4a188ec5340f02c9bd0643db0acb03409dd5829
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9843
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to make sure we won't lose any net interfaces needed for the
phy tests in case they got stuck behind lingering namespace.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic83bc5cca8b536bb3e72fbceb31d2560d840d05e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9795
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We can just always do the TAILQ_INITs for admin
related TAILQs. Also no need to set anything to
NULL since the buffer was allocated using calloc.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifbbda0436e7f33e225cf14dbd103779080b106da
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9729
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is needed since fio, by default, links to libtcmalloc if found
during the build. See:
01fe773df4Fixes#2192
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1de8fe9d489f92acb79ef0f169229a6c09ce1179
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9822
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_find_optimal_core was always consolidating idle threads to g_main_lcore.
Meanwhile for active threads lower lcore id were prioritized over the
higher ones.
So long as g_main_lcore can fit the active thread, it should be prioritized
over any other. Regardless of the lcore id.
Fix#2080
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I30b3a7353bcf243d4362b4db9dde5446c435d675
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9243
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously we decided which LUN format is used by the macro constant
SPDK_SCSI_DEV_MAX_LUN. However, as long as we read SAM, the LUN format
can be decided per LUN ID.
Linux host SCSI driver supports 256 LUNs per SCSI device at the
maximum. So we cannot test this fix on any actual system but we
apply this fix for the potential future cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa6a3b66431f5e1eade326348dd99b8b9653408b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most SCSI hosts, Linux, Windows, VMware, supports 256 LUNs per
device now, and it is not easy to test even if any other non-free
OS or driver supports more than 256 LUNs.
Hence increase the macro constant SPDK_SCSI_DEV_MAX_LUN from 64 to
256. Then we do not need to expose it publicly now. So move it to
lib/scsi/scsi_internal.h.
Update the CHANGELOG together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacde46c3854f326eebfb8befb47d41fce383b027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9631
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change a fixed size array to a linked list to manage LUNs per SCSI
device.
Keep the linked list sorted by LUN ID because this is necessary to
efficiently find the lowest free LUN ID or check the specified LUN is free.
To avoid traversing the linked list twice, change scsi_dev_find_free_lun()
to return the LUN which comes just before where we want to insert an new LUN.
Additionally, previously spdk_scsi_dev_add_lun_ext() had not checked if
the specified LUN ID was duplicated. Fix the bug in this patch.
Add unit test cases for the function scsi_dev_find_free_lun().
These changes will enable the following patches to increase
SPDK_SCSI_DEV_MAX_LUN from 64 to 256 without consuming additional memory.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f6f070ddc680127cf86ae255055da2d1d29e4ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It can be much simpler when inlined.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ifad89d7b9557a45eee601fc2004066a0fd9289c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Specifying only a transport id is not enough. We need to be able to
describe the host parameters too.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iadbea553aee4b38e7cacab0b486e7e5746d0d1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9825
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the currently active path identifier in a failover scenario. The
path is defined by more than just the transport identifier, so fix the
name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I682c6f4c54f75307e2615bf80e70358180d99fe2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9576
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines a unique path between a host and a target.
Change-Id: Ia3d24c1b34199a8b596aaf17900ca9694a9da77d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9505
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new path must differ in some way.
Change-Id: I98fd2b2cb3220b482efe0a19bfce94ec4e72bec2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9418
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This parameter may have the values "disable" or "failover". The default
is failover to match existing behavior. In the future we expect to
change the default behavior to disable.
Further, we expect to add an "enable" option soon to do full multipath.
Change-Id: Iebbdc9b95f23101f18d64e085933463498e627be
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9343
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I832cc8e2972b081a69a9704886e3c6b37d75847f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9796
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We know that the librbd's read/write operations will be handled by a
non spdk thread, so we can get rid of the epoll based group based
polling and directly use the async completion. This makes the code
is simple and easy to maintain.
And we still need to keep the io_device registration for this module,
because the I/Os are async. We need the channel reference on "rbd_if"
in order to know which rbd disks are still active.
Change-Id: I1c140a4b286dbfe113ed2a67bd2875de605e8f24
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9335
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the same effort as lib/iscsi.
By using spdk_scsi_dev_get_first_lun() and spdk_scsi_dev_get_next_lun(),
remove the dependency on SPDK_SCSI_DEV_MAX_LUN from lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib79d2c3f8e7a5027d3d2c03f8f886c588b86009b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9611
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use two new public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to manage iSCSI LUNs by linked list and
to traverse all LUNs of the SCSI device.
By these changes, we can remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3237e7f887dd761d6812ed4313f87b6e7884ea29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By this change, we will not need to traverse LUN list or tree in the
callback to hot remove.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe72fba824553d0189b9120884aa2113599a568d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9627
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an effort to remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieeff4136b16cc6bfa92614248f150bc9dfe3dc74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9609
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Add two public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to remove the dependency on the macro
constant SPDK_SCSI_DEV_MAX_LUN from lib/iscsi and lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6546697f823fe9f4fa34e1161f5c7fa912dd2d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9608
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9ba43f2c961b5590b472671b400163cd20199f28
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add "-g" parameter to use single segment file.
Change-Id: If12c75ccdf1e6074951819fb94cc85a982f9d843
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9677
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
