This is requirement for following patch. Requests that will
reuquest bounce buffer can only allocate limited size buffer.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I850b614305d66065733381ceb7bd67d4b1cad6b3
Reviewed-on: https://review.gerrithub.io/430783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch changes the name of the field. Following patches
will introduce logic that will guarantee that buffers
provided to bdev module will be aligned to value
specified in this field
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I5329b9fe26ef2417bc7beae86518cc643b263f97
Reviewed-on: https://review.gerrithub.io/430782
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In the case system charges PCI devices with the "uio_pci_generic"
kernel driver, the IOMMU should be disabled or passthrough, because
the virtual / physical address conversion by IOMMU will make the DMA
transmission invalid.
The patch guides users configure IOMMU in SPDK target system on both
x86_64 and arm64 systems.
Change-Id: I66df4df855a6669d4838eb88bd400ded87d08a49
Signed-off-by: tone.zhang <tone.zhang@arm.com>
Reviewed-on: https://review.gerrithub.io/424470
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix issue #478.
spdk_vhost reports "GPT Primary MBR size does not equal" sometimes,
DEBUGLOG will be better here.
Change-Id: I7402c606a30022afe1ade9db95778c6d1d58f8b9
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/431992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use of _SAFE macro when not required.
Change-Id: I9bc9fd8dff80312ffc85fd0d721b9c8df55f6388
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/431823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Add a mechanism to modify the RDMA transport's behavior
when creating protection domains and registering memory.
This is entirely optional.
Change-Id: I7cd850e76a673bf5521ca4815b779c53ab9567e8
Signed-off-by: zkhatami88 <z.khatami88@gmail.com>
Reviewed-on: https://review.gerrithub.io/421415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK 18.11 sets the default base-virtaddr to an address
that falls into an area reserved by ASAN. DPDK will try
to remap its memory over and over with the closest
base-virtaddr hint and for ASAN case this would take
a huge amount of time.
This was already raised on DPDK mailing list [1] and
might be eventually fixed or worked around in upstream,
but for now let's just override the default base-virtaddr
to a value that ASAN is known not to occupy.
[1] http://patches.dpdk.org/patch/46130/#88395
Change-Id: Ieada30e82355e8ead458e53795ab98cd12692c1c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431257
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous functions were deprecated and now removed.
Change-Id: I076125aaf80b97c627ca45b860700fdf6d87e925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/430557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since a PDU can be sentout in many times, so this
function is called multiple times, so move the
caculation function in spdk_iscsi_conn_write_pdu
Change-Id: Ib4da4a74c17709d98e4b01c2e76428021afea947
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/429931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
And adjust language a little, by the way
Change-Id: I6bd6412a061657b23c4fd2e2db265da56b823514
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/431581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A major iSCSI initiator requires iSCSI targets to handle base64
constants for CHAP packets from the initiator.
This patch enables the SPDK iSCSI target to handle base64 constants
for CHAP packets from the initiator.
Change-Id: I276eb73113c40baa322904fe562d5b6016cccf33
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/431086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In RFC3720, the following terminologies based on RFC1994 are used:
- CHAP_A=<Algorithm>
- CHAP_C=<Challenge>
- CHAP_N=<Name>
- CHAP_R=<Response>
- CHAP_I=<Identifier>
The next patche will support base64 constants. Sticking to the terminologies
will be helpful to review and maintain it.
Change-Id: If7088163e7a3c6d771e1743415bc97fe97078d2f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/431083
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
the weak memory ordering on armv8 can be implemented using
dsb ld
see
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0802b/DMB.html
Change-Id: I4db34b87fa659967109adc688cad784018cedaae
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Reviewed-on: https://review.gerrithub.io/430767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Include patch that comments out options needed for compression vbdev.
Change-Id: Ie5293b691eed0f6d0e0470264e467aa5621c084f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/431696
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just considering the situation of multi-namespaces device.
Change-Id: I1b0d502874ab53891060c973a3ae75e81ec591f2
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/431698
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When deleting bdev of NVMe type by delete_bdev rpc,
if the bdev is the last one NVMe bdev of the NVMe
controller, the NVMe controller will be deleted too.
With this change, the nvme_ctrlr will be retained
inside SPDK app after delete_bdev rpc. And the
nvme_ctrlr can be deleted by delete_nvme_controller
rpc.
Change-Id: Icad6c24d342b9e4bcb69ec7a4b1a352c2df113f2
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/431582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
glibc will print "(null)" if we pass a null pointer as the argument for
a %s conversion, but it is not a standard behavior.
Change-Id: I85a6b4d571a60e7f3755d13722247e7494998a94
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/431725
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function was always reporting true. Instead of grepping for the nic
name in the output, look for whether there is an rxe device assigned to
that nic.
Change-Id: Ic69868cfb0802a46c36b2fb83d01bca11ed9c181
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/431690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The empty first cells starting at silence-noticelog were causing the
table to not generate properly.
Change-Id: I6551aa88034e93fa37de772beee0e1c3fcbc5be1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With this change on 48 core system the checking format takes ~4.5s which
is acceptable execution time.
Change-Id: Icc97466c59a7a1072fcbd705203fc8ee0dba158e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/431355
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add missing wait in test/nvme/shutdown/shutdown.sh
Not waiting after connecting nvme device resulted in undefined behavior.
This patch uses new helper function - nvme_connect
Change-Id: Idb29c7f6b40ae4b3fa0eb68f7b8d5f86d9a4149f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/428336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the extra zero in:
"Starting SPDK v19.001-pre"
Woops.
Change-Id: I0aefaa8b2660dce38b400a143cb0a791283e346f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431753
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In cases we probe without a specific trid, the underlying
rte_bus_probe() in spdk_pci_enumerate() might fail to
initialize some devices, but still return with code 0,
That's technically correct, as we asked just to probe
devices on the bus and that's what it did. Some devices might
have been initialized, others not. In secondary process we
blindly assumed all devices were probed successfully, which
might have eventually led to assert failures, as current
process was not on the ctrlr->active_procs list.
To fix it, just add an additional check before attaching
the controller in secondary process.
Change-Id: If015b1e562052a9189ed1a48091b209bd2dd5f2a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only detached the PCI device on the controller destruction,
which happens just once - in the primary process, but secondary
process needs the PCI detach as well.
Requesting to hotremove the NVMe PCIe controller in secondary
process is broken, because DPDK will still keep the device
reference and won't allow SPDK to hotplug it again.
Fix this by detaching the local PCI device whenever removing
a secondary process from spdk_nvme_ctrlr. This does require
an additional transport check in the generic NVMe layer, but
I found it an overkill to create a multi-process transport
abstraction just for this case.
Change-Id: I812dc1c878ade5b149556806228a2afcb49f0b17
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The underlying probe might fail, but we don't check its
return code. Right now we ignore the failure and in secondary
process we even continue referencing a locally-unitialized
controller struct. Then, a few calls later, we fail on assert
because current process is not on the ctrlr->active_procs list.
Change-Id: I65a59a9515a8e0196b60a181cee2af33434784dc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/431486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In order to prepare for multiple transports, the nvmf tgt should never
implicitly create a transport when listen is called.
Change-Id: If1286e7e3f7bce422a4acd66390852736113df7a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430160
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This includes the NVMe-oF json_config and spdkcli tests
Change-Id: I5e4dad2c1bb68c4b7f36d50e937c56ef642f65b7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There are a couple of runtime errors in spdkcli that prevent it from
properly loading. One is the fact that it doesn't properly check to make
sure that specific subsystems are enabled before trying to load them.
The other is an apparently uninitialized variable in the iscsi object.
Change-Id: I458c6da71b60697b19c924308ac0e33a12f7a8a6
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Part of a larger series aimed at exposing NVMe-oF transports though rpc
and spdkcli. This is in line with the goal of initializing all NVMe-oF
options on a per-transport basis.
Change-Id: I4f07d58d49b925cf51df3980d2e2161c50169cee
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK poller function will return the different value for
the different status. Update the QoS poller for this change.
Change-Id: Ia384bf00a23713df663c317b1997ead441c5adcb
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/428573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1.nvmf: change the return type of calloc failed to -ENOMEM and
keep consistency in this file.
2.thread: revise rc condition to ( rc!= 0),to deal with
all abnormal return.
Change-Id: I7cccb548f30448eaa1bac1a5904c3edcad9c1208
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/431459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current behaviour will match anything that contain address. Change this
to match whole address only.
Change-Id: I6343fb91ed624cba41adbc33d711fb48c2f167a1
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/431530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Especially for rxe. We're not waiting for the queue pairs to get
cleaned up after disconnect, so this test fails due to running
out of qpairs sometimes.
Change-Id: Ib99133776d02743782ef1631e3880e4e6997c1b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/431372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
We were previously doing lots of checks in debug mode
to verify the validity of this field. Now we understand
how it works, so these checks are never going to hit
and are just making the code harder to read.
Change-Id: Ic82d479ae34a8c7db06db62aee1cdf6e8bec126e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430866
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
When we thought we could do error recovery we differentiated between
inactive and erro states. However, that's not possible so collapse
them back into one.
Change-Id: I57622c400378f2d4c518efbc12fb52e665a9ba4c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The specification states that opcode is not valid when the status
is not success. Instead, keep track of the operation type ourselves.
Change-Id: I60af4b35e761c46f5f296a61cedfca198836197f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Co-authored-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/430865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
After some lengthy discussions with the RDMA experts, the only
way forward on an RDMA qp error is to disconnect it. The initiator
can create a new qp if it wants to later on.
Remove all of the error recovery code and disconnect the qp
any time an error is encountered.
Change-Id: I11e1df5aaeb8592a47ca01529cfd6a069828bd7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let's just make them consistent and all with a
bdev_* format.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3dec7f4be2ecc765b4aa095e6b675f13d326063
Reviewed-on: https://review.gerrithub.io/429289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Currently only the iscsi => scsi dependency is defined to
demonstrate how the framework behaves.
Eventually, lib/Makefile will be populated with more lines
of the form:
DEPDIRS-iscsi : scsi log conf event
This line will ensure that the iscsi subdirectory is built
after the specified dependency directories.
Then the lib/iscsi/Makefile also defines:
DEP_LIBNAMES = scsi log conf event
This line adds dependencies from the iscsi.so to the specified
libraries.
Ideally we could avoid this duplication by passing the DEPDIRS
value to the lower level Makefile, but that breaks down when we
start considering event/subsystems/* libraries. So for now we'll
need to duplicate it. Incidentally, DPDK also duplicates the
dependency information like this.
While here, remove use of $(MAKESUBDIRFLAGS) in spdk.subdirs.mk -
it was no longer used anywhere in the tree.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If63cbc10ffa18ac6361e4210bd6196ffe88bec43
Reviewed-on: https://review.gerrithub.io/429287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2ca1364cce390c9010a3797bb604aee49de8c990
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.gerrithub.io/429957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Put the core operation into the loop without using the found flag.
Change-Id: I6509988f11a87e7a7f0ffbad46a090837ee9de20
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430512
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The condition that both raid_bdev and raid_bdev->base_bdev_info[i].bdev
are not NULL is already verified by matching it with base_bdev.
This is a preparation to the further refactoring in the next patch.
Change-Id: I273a31c2ff2f79caf52b59938eee547129768abe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Remove the duplicated operation and reorder configure() to initialize
the raid_bdev and then the bdev.
Change-Id: Ic39da1936b0755e6acd1ae62bd55a241b77f7056
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, add error message if an invalid timeout action value is found.
Change-Id: I09acec39680a640ea9bc2d7a819e4b1887ed622d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/429874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
