Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change tests to use read/write vector and non-vector versions.
Change-Id: I5a97568d3dc2f61d44721f4b0c75331baad417bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
Explicitly include the pthread header after removing some headers that
implicitly included it.
Change-Id: I39fe272acfcc63d3888d2430137de2c3426f1af6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use standard GCC style atomic operations instead of
the DPDK calls. The DPDK calls end up translating
to the gcc standard inline calls in the generic
case anyway.
Change-Id: I0ea760c4e23c3660b082a803bbc174de7250f365
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the type from int to bool and change the name
from data_ref to data_from_mempool.
Change-Id: If1fc11761e63561443ed44d6a0860e416e424df8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This is required since pollers are now directly removed
(rather than scheduling an event) when the unregister call
is made on the poller's lcore.
Without this change, if a poller is registered then
immediately unregistered, the unregistration will seg
fault since the event adding the poller has not executed
yet.
Also add a test case that exhibits the sequence of events
described in this commit message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6ba0ee224ac1f8f3ebb8e7571714e718bd42db
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Also stop submitting new I/O for any target that reports
an I/O failure by setting its is_draining flag when the I/O
failure is detected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I89c9d19b22a164caf5aef20d63b509d33b7aeef7
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: I5f401527c2717011ecc21116363bbb722e804112
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Provide a convenience wrapper for general purpose dataset
management commands. The previous wrapper for deallocate
was difficult to use correctly and only for deallocate.
Note that the name is "dataset_management" as opposed to
"data_set_management" to match the NVMe specification.
It's questionable whether "dataset" is valid English, but
it is best to match the specification.
Change-Id: Ifc03d66dbabeabe8146968cf8a09f7ac3446ad68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Where possible (for tests that don't require DPDK), run the unit tests
under Valgrind to check for memory leaks and out-of-bounds accesses.
Change-Id: Ic7b3cdd39a6d59f4e41b4a161be3363f6b076f65
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid putting the large JSON-RPC server structs on the stack in the unit
test code, since it confuses Valgrind.
Change-Id: I598530810aa23e802d07cd1bb94de16920f33dac
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modify the spdk_poller_unregister() function so that it works correctly
when unregistering a poller from its own callback function.
Change-Id: I57fa5ebd8a8bad522e34f597b406a4726f1b76ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was added after the previous SPDK_CU_ASSERT_FATAL change was
merged.
Change-Id: I9d26fcd78157b6c9b232ac1e7484d0939cc90612
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add some checks to hit paths not covered by the current tests.
Change-Id: If8e7977ab8327eacfa33657d0a167f3b935b0113
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some subsystems may wish to create unique I/O channels
which are not shared across all users of the same I/O
device on the same thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ade3675d57338cf85b6a301285e6f392bd6cd2e
Also remove libspdk_util.a from the io_channel_ut linker command, since
it already includes the tested C file directly and doesn't depend on any
other util library functions.
Change-Id: I4b3fc4d57b5af4524b53664365f6ba52686e4b80
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The test can't continue if a NULL pointer would be dereferenced.
Change-Id: If857057c69679de3be08c4605d15bc2b3892210a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If posix_memalign() fails, it may not have updated buf, so set it to
NULL explicitly.
Change-Id: I756bdc59ec1e31987ad3e6754eec4e2194b95074
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
With the I/O channel changes, this test needs to be rewritten
to be event-based. bdevio uses the spdk_bdev_do_work() function
to poll for completions, which is built on the check_io functions
that are going away when we move to using I/O channels.
Do not delete the code from the tree - just detach it from the
build and the test scripts for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88674988db6ccb3673faf7eb5b3e79b403059fa4
This patch adds a basic framework for creating I/O channels
for I/O devices. An spdk_io_channel represents a one-to-one
mapping between a calling thread (represented by spdk_thread)
and an I/O device that the thread will perform I/O operations
on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I658ab7f995cc962f4e2a204e058cdd3ad3fd735d
Purpose: To make the function definition style consistent
Change-Id: I7ade943881aa5076fdd419958e386ae3c3661da6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
Rather than forcing the NVMe library user to pass a specially-allocated
block of memory (e.g. rte_malloc() in the case of the default
nvme_impl.h), just make the NVMe library allocate a suitable buffer
itself and copy to/from the user buffer as needed.
The fast path I/O functions still require special rte_malloc()
allocations, since we don't want to add an allocation and copy to the
I/O critical path.
Change-Id: I7fe88c0ba60c859a33bbe95b7713f423c6bf1ea8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Rename this function and make it more meaninful, since
we have spdk_nvmf_session_connect which is used to link a
connection to the session
2 split spdk_nvmf_session_destruct.
Change-Id: I150df7ccdf4de3428d8cecbb286d5f7944510a8c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The application is now entirely responsible for scheduling subsystem
pollers and sending events between threads.
Change-Id: I88da1f53b5e8852c7c4acd6f0a7a1e2219fbed41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In acceptor_poller_unregistered_event, we
directly call spdk_nvmf_check_pools and spdk_app_stop,
it will fail the memory check.
And function nvmf_delete_subsystem_poller_unreg will
not be called since we already call spdk_app_stop.
Change-Id: I3ffa30c87b149a66cee1d87d1bb81d4dc8cc96b9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The translation code currently cheats a bit - it allocates a full 4KB
buffer for any DATA_IN command that is not a READ, and then the
different SCSI commands that fall into this category (INQUIRY,
READ_CAPACITY, MODE_SENSE, etc.) can write as much data as they
want without having to worry about a buffer overrun. Code higher
up the stack makes sure we only send the correct amount of data back
to the iSCSI initiator.
This patch fixes this behavior for standard INQUIRY (EVPD = 0).
Future patches will fix the behavior for other non-READ DATA_IN
commands, at which point we can remove the 4KB allocation and
only allocate the amount of data specified in the CDB.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5e4a10eeba9851e2d91cab71228d2fc2d5baad0
Switch from the non-portable <sys/endian.h> functions (htobeXX/beXXtoh)
to the SPDK endian conversion functions.
Change-Id: Id49b87f2e536c68f0d5d567e78e1990c0a37ef14
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the NQN validation into the subsytem creation function, and fix the
allowed size to match the spec.
The spec is not clear about the allowed NQN size; for now, interpret it
as 223 bytes, including the null terminator (222 bytes of actual NQN
plus one terminator byte).
Change-Id: If9743ab2fe009d9d852e8b03317d9b38d8af18dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be useful outside of the SCSI code, so put it in the common
string utility file.
Also reorder the parameters so they match the order used in strncpy().
Change-Id: I9e25a59b64e4bedf04e5a96de463b1d8aa0ddac3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Clean up the poller and only then free the associated subsystem's
memory. This prepares for future dynamic subsystem creation/deletion.
Change-Id: I9e56cbf8822814930fdbb662095c51b6ad40fbc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I822f9c10910020719e94cce6fca4e1600a2d9f2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I28123d427ea8da07c6329b0233f0702f2d85c2a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Comments are not allowed in the JSON RFC, but some JSON libraries accept
JavaScript-style comments.
Add a flag that enables non-spec-compliant comment parsing.
Change-Id: I9dfb66bb46ecff1a22d8af5a9c50620686a4707c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
