Shuhei Matsumoto 750e5d25fb iscsi&scripts/rpc: Add add/delete_secret_to/from_iscsi_auth_group RPCs

Add RPCs to add/delete a secret to/from an existing authentication group
dynamically.

Use mutex to ensure exclusive access to CHAP secrets.

Tries to use descriptive message in RPCs when error occurs.

Change-Id: I59650ae11a2fe675d03b90bbd4d2dc5b9c0160ed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

2018-08-27 21:13:49 +00:00

90 KiB

Raw Blame History

JSON-RPC Methods

Overview

SPDK implements a JSON-RPC 2.0 server to allow external management tools to dynamically configure SPDK components.

Parameters

Most of the commands can take parameters. If present, parameter is validated against its domain. If this check fail whole command will fail with response error message [Invalid params](@ref jsonrpc_error_message).

Required parameters

These parameters are mandatory. If any required parameter is missing RPC command will fail with proper error response.

Optional parameters

Those parameters might be omitted. If an optional parameter is present it must be valid otherwise command will fail proper error response.

Error response message

Each error response will contain proper message. As much as possible the message should indicate what went wrong during command processing.

There is ongoing effort to customize this messages but some RPC methods just return "Invalid parameters" as message body for any kind of error.

Code	Description
-1	Invalid state - given method exists but it is not callable in [current runtime state](@ref rpc_start_subsystem_init)
-32600	Invalid request - not compliant with JSON-RPC 2.0 Specification
-32601	Method not found
-32602	@ref jsonrpc_invalid_params
-32603	Internal error for e.g.: errors like out of memory
-32700	@ref jsonrpc_parser_error

Parser error

Encountered some error during parsing request like:

the JSON object is malformed
parameter is too long
request is too long

Invalid params

This type of error is most common one. It mean that there is an error while processing the request like:

Parameters decoding in RPC method handler failed because required parameter is missing.
Unknown parameter present encountered.
Parameter type doesn't match expected type e.g.: given number when expected a string.
Parameter domain check failed.
Request is valid but some other error occurred during processing request. If possible message explains the error reason nature.

App Framework

kill_instance

Send a signal to the application.

Parameters

Name	Optional	Type	Description
sig_name	Required	string	Signal to send (SIGINT, SIGTERM, SIGQUIT, SIGHUP, or SIGKILL)

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "kill_instance",
  "params": {
    "sig_name": "SIGINT"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

context_switch_monitor

Query, enable, or disable the context switch monitoring functionality.

Parameters

Name	Optional	Type	Description
enabled	Optional	boolean	Enable (`true`) or disable (`false`) monitoring (omit this parameter to query the current state)

Response

Name	Type	Description
enabled	boolean	The current state of context switch monitoring

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "context_switch_monitor",
  "params": {
    "enabled": false
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "enabled": false
  }
}

start_subsystem_init

Start initialization of SPDK subsystems when it is deferred by starting SPDK application with option -w. During its deferral some RPCs can be used to set global parameters for SPDK subsystems. This RPC can be called only once.

Parameters

This method has no parameters.

Response

Completion status of SPDK subsystem initialization is returned as a boolean.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "start_subsystem_init"
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_rpc_methods

Get an array of supported RPC methods.

Parameters

Name	Optional	Type	Description
current	Optional	boolean	Get an array of RPC methods only callable in the current state.

Response

The response is an array of supported RPC methods.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "get_rpc_methods"
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    "start_subsystem_init",
    "get_rpc_methods",
    "get_scsi_devices",
    "get_interfaces",
    "delete_ip_address",
    "add_ip_address",
    "get_nbd_disks",
    "stop_nbd_disk",
    "start_nbd_disk",
    "get_trace_flags",
    "clear_trace_flag",
    "set_trace_flag",
    "get_log_level",
    "set_log_level",
    "get_log_print_level",
    "set_log_print_level",
    "get_iscsi_global_params",
    "target_node_add_lun",
    "get_iscsi_connections",
    "delete_portal_group",
    "add_portal_group",
    "get_portal_groups",
    "delete_target_node",
    "delete_pg_ig_maps",
    "add_pg_ig_maps",
    "construct_target_node",
    "get_target_nodes",
    "delete_initiator_group",
    "delete_initiators_from_initiator_group",
    "add_initiators_to_initiator_group",
    "add_initiator_group",
    "get_initiator_groups",
    "set_iscsi_options",
    "set_bdev_options",
    "set_bdev_qos_limit_iops",
    "delete_bdev",
    "get_bdevs_config",
    "get_bdevs",
    "get_bdevs_iostat",
    "get_subsystem_config",
    "get_subsystems",
    "context_switch_monitor",
    "kill_instance",
    "scan_ioat_copy_engine",
    "construct_virtio_dev",
    "construct_virtio_pci_blk_bdev",
    "construct_virtio_user_blk_bdev",
    "get_virtio_scsi_devs",
    "remove_virtio_bdev",
    "remove_virtio_scsi_bdev",
    "construct_virtio_pci_scsi_bdev",
    "construct_virtio_user_scsi_bdev",
    "delete_aio_bdev",
    "construct_aio_bdev",
    "destruct_split_vbdev",
    "construct_split_vbdev",
    "bdev_inject_error",
    "delete_error_bdev",
    "construct_error_bdev",
    "construct_passthru_bdev",
    "apply_nvme_firmware",
    "delete_nvme_controller",
    "construct_nvme_bdev",
    "construct_null_bdev",
    "delete_malloc_bdev",
    "construct_malloc_bdev",
    "get_lvol_stores",
    "destroy_lvol_bdev",
    "resize_lvol_bdev",
    "decouple_parent_lvol_bdev",
    "inflate_lvol_bdev",
    "rename_lvol_bdev",
    "clone_lvol_bdev",
    "snapshot_lvol_bdev",
    "construct_lvol_bdev",
    "destroy_lvol_store",
    "rename_lvol_store",
    "construct_lvol_store"
  ]
}

get_subsystems

Get an array of name and dependency relationship of SPDK subsystems in initialization order.

Parameters

None

Response

The response is an array of name and dependency relationship of SPDK subsystems in initialization order.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "get_subsystems"
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "subsystem": "copy",
      "depends_on": []
    },
    {
      "subsystem": "interface",
      "depends_on": []
    },
    {
      "subsystem": "net_framework",
      "depends_on": [
        "interface"
      ]
    },
    {
      "subsystem": "bdev",
      "depends_on": [
        "copy"
      ]
    },
    {
      "subsystem": "nbd",
      "depends_on": [
        "bdev"
      ]
    },
    {
      "subsystem": "nvmf",
      "depends_on": [
        "bdev"
      ]
    },
    {
      "subsystem": "scsi",
      "depends_on": [
        "bdev"
      ]
    },
    {
      "subsystem": "vhost",
      "depends_on": [
        "scsi"
      ]
    },
    {
      "subsystem": "iscsi",
      "depends_on": [
        "scsi"
      ]
    }
  ]
}

get_subsystem_config

Get current configuration of the specified SPDK subsystem

Parameters

Name	Optional	Type	Description
name	Required	string	SPDK subsystem name

Response

The response is current configuration of the specified SPDK subsystem. Null is returned if it is not retrievable by the get_subsystem_config method and empty array is returned if it is empty.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "get_subsystem_config",
  "params": {
    "name": "bdev"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "params": {
        "base_bdev": "Malloc2",
        "split_size_mb": 0,
        "split_count": 2
      },
      "method": "construct_split_vbdev"
    },
    {
      "params": {
        "trtype": "PCIe",
        "name": "Nvme1",
        "traddr": "0000:01:00.0"
      },
      "method": "construct_nvme_bdev"
    },
    {
      "params": {
        "trtype": "PCIe",
        "name": "Nvme2",
        "traddr": "0000:03:00.0"
      },
      "method": "construct_nvme_bdev"
    },
    {
      "params": {
        "block_size": 512,
        "num_blocks": 131072,
        "name": "Malloc0",
        "uuid": "913fc008-79a7-447f-b2c4-c73543638c31"
      },
      "method": "construct_malloc_bdev"
    },
    {
      "params": {
        "block_size": 512,
        "num_blocks": 131072,
        "name": "Malloc1",
        "uuid": "dd5b8f6e-b67a-4506-b606-7fff5a859920"
      },
      "method": "construct_malloc_bdev"
    }
  ]
}

Block Device Abstraction Layer

set_bdev_options

Set global parameters for the block device (bdev) subsystem. This RPC may only be called before SPDK subsystems have been initialized.

Parameters

Name	Optional	Type	Description
bdev_io_pool_size	Optional	number	Number of spdk_bdev_io structures in shared buffer pool
bdev_io_cache_size	Optional	number	Maximum number of spdk_bdev_io structures cached per thread

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "set_bdev_options",
  "params": {
    "bdev_io_pool_size": 65536,
    "bdev_io_cache_size": 256
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_bdevs

Get information about block devices (bdevs).

Parameters

The user may specify no parameters in order to list all block devices, or a block device may be specified by name.

Name	Optional	Type	Description
name	Optional	string	Block device name

Response

The response is an array of objects containing information about the requested block devices.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "get_bdevs",
  "params": {
    "name": "Malloc0"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "name": "Malloc0",
      "product_name": "Malloc disk",
      "block_size": 512,
      "num_blocks": 20480,
      "claimed": false,
      "supported_io_types": {
        "read": true,
        "write": true,
        "unmap": true,
        "write_zeroes": true,
        "flush": true,
        "reset": true,
        "nvme_admin": false,
        "nvme_io": false
      },
      "driver_specific": {}
    }
  ]
}

get_bdevs_iostat

Get I/O statistics of block devices (bdevs).

Parameters

The user may specify no parameters in order to list all block devices, or a block device may be specified by name.

Name	Optional	Type	Description
name	Optional	string	Block device name

Response

The response is an array of objects containing I/O statistics of the requested block devices.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "get_bdevs_iostat",
  "params": {
    "name": "Nvme0n1"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "name": "Nvme0n1",
      "bytes_read": 34051522560,
      "num_read_ops": 8312910,
      "bytes_written": 0,
      "num_write_ops": 0
    }
  ]
}

delete_bdev

Unregister a block device.

Parameters

Name	Optional	Type	Description
name	Required	string	Block device name

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "delete_bdev",
  "params": {
    "name": "Malloc0"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

set_bdev_qos_limit_iops

Set an IOPS-based quality of service rate limit on a bdev.

Parameters

Name	Optional	Type	Description
name	Required	string	Block device name
ios_per_sec	Required	number	Number of I/Os per second to allow. 0 means unlimited.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "set_bdev_qos_limit_iops",
  "params": {
    "name": "Malloc0"
    "ios_per_sec": 20000
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_malloc_bdev

Construct @ref bdev_config_malloc

Parameters

Name	Optional	Type	Description
name	Optional	string	Bdev name to use
block_size	Required	number	Block size in bytes -must be multiple of 512
num_blocks	Required	number	Number of blocks
uuid	Optional	string	UUID of new bdev

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "block_size": 4096,
    "num_blocks": 16384,
    "name": "Malloc0",
    "uuid": "2b6601ba-eada-44fb-9a83-a20eb9eb9e90"
  },
  "jsonrpc": "2.0",
  "method": "construct_malloc_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "Malloc0"
}

delete_malloc_bdev

Delete @ref bdev_config_malloc

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "Malloc0"
  },
  "jsonrpc": "2.0",
  "method": "delete_malloc_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_null_bdev

Construct @ref bdev_config_null

Parameters

Name	Optional	Type	Description
name	Optional	string	Bdev name to use
block_size	Required	number	Block size in bytes
num_blocks	Required	number	Number of blocks
uuid	Optional	string	UUID of new bdev

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "block_size": 4096,
    "num_blocks": 16384,
    "name": "Null0",
    "uuid": "2b6601ba-eada-44fb-9a83-a20eb9eb9e90"
  },
  "jsonrpc": "2.0",
  "method": "construct_null_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "Null0"
}

delete_null_bdev

Delete @ref bdev_config_null.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "Null0"
  },
  "jsonrpc": "2.0",
  "method": "delete_null_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_aio_bdev

Construct @ref bdev_config_aio.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name to use
filename	Required	number	Path to device or file
block_size	Optional	number	Block size in bytes

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "block_size": 4096,
    "name": "Aio0",
    "filename": "/tmp/aio_bdev_file"
  },
  "jsonrpc": "2.0",
  "method": "construct_aio_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "Aio0"
}

delete_aio_bdev

Delete @ref bdev_config_aio.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "Aio0"
  },
  "jsonrpc": "2.0",
  "method": "delete_aio_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

set_bdev_nvme_options

Set global parameters for all bdev NVMe. This RPC may only be called before SPDK subsystems have been initialized.

Parameters

Name	Optional	Type	Description
action_on_timeout	Optional	string	Action to take on command time out: none, reset or abort
timeout_us	Optional	number	Timeout for each command, in microseconds. If 0, don't track timeouts
retry_count	Optional	number	The number of attempts per I/O before an I/O fails
nvme_adminq_poll_period_us	Optional	number	How often the admin queue is polled for asynchronous events in microsecond

Example

Example request:

request:
{
  "params": {
    "retry_count": 5,
    "nvme_adminq_poll_period_us": 2000,
    "timeout_us": 10000000,
    "action_on_timeout": "reset"
  },
  "jsonrpc": "2.0",
  "method": "set_bdev_nvme_options",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

set_bdev_nvme_hotplug

Change settings of the NVMe hotplug feature. If enabled, PCIe NVMe bdevs will be automatically discovered on insertion and deleted on removal.

Parameters

Name	Optional	Type	Description
enabled	Required	string	True to enable, false to disable
period_us	Optional	number	How often to poll for hot-insert and hot-remove events. Values: 0 - reset/use default or 1 to 10000000.

Example

Example request:

request:
{
  "params": {
    "enabled": true,
    "period_us": 2000
  },
  "jsonrpc": "2.0",
  "method": "set_bdev_nvme_hotplug",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_nvme_bdev

Construct @ref bdev_config_nvme

Result

Array of names of newly created bdevs.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name
trtype	Required	string	NVMe-oF target trtype: rdma or pcie
traddr	Required	string	NVMe-oF target address: ip or BDF
adrfam	Optional	string	NVMe-oF target adrfam: ipv4, ipv6, ib, fc, intra_host
trsvcid	Optional	string	NVMe-oF target trsvcid: port number
subnqn	Optional	string	NVMe-oF target subnqn
hostnqn	Optional	string	NVMe-oF target hostnqn

Example

Example request:

{
  "params": {
    "trtype": "pcie",
    "name": "Nvme0",
    "traddr": "0000:0a:00.0"
  },
  "jsonrpc": "2.0",
  "method": "construct_nvme_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    "Nvme0n1"
  ]
}

delete_nvme_controller

Delete NVMe controller.

Parameters

Name	Optional	Type	Description
name	Required	string	Controller name

Example

Example requests:

{
  "params": {
    "name": "Nvme0"
  },
  "jsonrpc": "2.0",
  "method": "delete_nvme_controller",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_rbd_bdev

Construct @ref bdev_config_rbd bdev

This method is available only if SPDK was build with Ceph RBD support.

Parameters

Name	Optional	Type	Description
name	Optional	string	Bdev name
pool_name	Required	string	Pool name
rbd_name	Required	string	Image name
block_size	Required	number	Block size

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "pool_name": "rbd",
    "rbd_name": "foo",
    "block_size": 4096
  },
  "jsonrpc": "2.0",
  "method": "construct_rbd_bdev",
  "id": 1
}

Example response:

response:
{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "Ceph0"
}

delete_rbd_bdev

Delete @ref bdev_config_rbd bdev

This method is available only if SPDK was build with Ceph RBD support.

Result

true if bdev with provided name was deleted or false otherwise.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "Rbd0"
  },
  "jsonrpc": "2.0",
  "method": "delete_rbd_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_error_bdev

Construct error bdev.

Parameters

Name	Optional	Type	Description
base_name	Required	string	Base bdev name

Example

Example request:

{
  "params": {
    "base_name": "Malloc0"
  },
  "jsonrpc": "2.0",
  "method": "construct_error_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_error_bdev

Delete error bdev

Result

true if bdev with provided name was deleted or false otherwise.

Parameters

Name	Optional	Type	Description
name	Required	string	Error bdev name

Example

Example request:

{
  "params": {
    "name": "EE_Malloc0"
  },
  "jsonrpc": "2.0",
  "method": "delete_error_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_iscsi_bdev

Connect to iSCSI target and create bdev backed by this connection.

This method is available only if SPDK was build with iSCSI initiator support.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name
initiator_iqn	Required	string	IQN name used during connection
url	Required	string	iSCSI resource URI

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "url": "iscsi://127.0.0.1/iqn.2016-06.io.spdk:disk1/0",
    "initiator_iqn": "iqn.2016-06.io.spdk:init",
    "name": "iSCSI0"
  },
  "jsonrpc": "2.0",
  "method": "construct_iscsi_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "iSCSI0"
}

delete_iscsi_bdev

Delete iSCSI bdev and terminate connection to target.

This method is available only if SPDK was built with iSCSI initiator support.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "iSCSI0"
  },
  "jsonrpc": "2.0",
  "method": "delete_iscsi_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

create_pmem_pool

Create a @ref bdev_config_pmem blk pool file. It is equivalent of following pmempool create command:

pmempool create -s $((num_blocks * block_size)) blk $block_size $pmem_file

This method is available only if SPDK was built with PMDK support.

Parameters

Name	Optional	Type	Description
pmem_file	Required	string	Path to new pmem file
num_blocks	Required	number	Number of blocks
block_size	Required	number	Size of each block in bytes

Example

Example request:

{
  "params": {
    "block_size": 512,
    "num_blocks": 131072,
    "pmem_file": "/tmp/pmem_file"
  },
  "jsonrpc": "2.0",
  "method": "create_pmem_pool",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

pmem_pool_info

Retrieve basic information about PMDK memory pool.

This method is available only if SPDK was built with PMDK support.

Parameters

Name	Optional	Type	Description
pmem_file	Required	string	Path to existing pmem file

Result

Array of objects describing memory pool:

Name	Type	Description
num_blocks	number	Number of blocks
block_size	number	Size of each block in bytes

Example

Example request:

request:
{
  "params": {
    "pmem_file": "/tmp/pmem_file"
  },
  "jsonrpc": "2.0",
  "method": "pmem_pool_info",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "block_size": 512,
      "num_blocks": 129728
    }
  ]
}

delete_pmem_pool

Delete pmem pool by removing file pmem_file. This method will fail if pmem_file is not a valid pmem pool file.

This method is available only if SPDK was built with PMDK support.

Parameters

Name	Optional	Type	Description
pmem_file	Required	string	Path to new pmem file

Example

Example request:

{
  "params": {
    "pmem_file": "/tmp/pmem_file"
  },
  "jsonrpc": "2.0",
  "method": "delete_pmem_pool",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_pmem_bdev

Construct @ref bdev_config_pmem bdev.

This method is available only if SPDK was built with PMDK support.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name
pmem_file	Required	string	Path to existing pmem blk pool file

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "pmem_file": "/tmp/pmem_file",
    "name": "Pmem0"
  },
  "jsonrpc": "2.0",
  "method": "construct_pmem_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "Pmem0"
}

delete_pmem_bdev

Delete @ref bdev_config_pmem bdev. This call will not remove backing pool files.

This method is available only if SPDK was built with PMDK support.

Result

true if bdev with provided name was deleted or false otherwise.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "Pmem0"
  },
  "jsonrpc": "2.0",
  "method": "delete_pmem_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_passthru_bdev

Create passthru bdev. This bdev type redirects all IO to it's base bdev. It has no other purpose than being an example and a starting point in development of new bdev type.

Parameters

Name	Optional	Type	Description
passthru_bdev_name	Required	string	Bdev name
base_bdev_name	Required	string	Base bdev name

Result

Name of newly created bdev.

Example

Example request:

{
  "params": {
    "base_bdev_name": "Malloc0",
    "passthru_bdev_name": "Passsthru0"
  },
  "jsonrpc": "2.0",
  "method": "construct_passthru_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "Passsthru0"
}

delete_passthru_bdev

Delete passthru bdev.

Parameters

Name	Optional	Type	Description
name	Required	string	Bdev name

Example

Example request:

{
  "params": {
    "name": "Passsthru0"
  },
  "jsonrpc": "2.0",
  "method": "delete_passthru_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_virtio_dev

Create new initiator @ref bdev_config_virtio_scsi or @ref bdev_config_virtio_blk and expose all found bdevs.

Parameters

Name	Optional	Type	Description
name	Required	string	Virtio SCSI base bdev name or Virtio Blk bdev name
trtype	Required	string	Virtio target trtype: pci or user
traddr	Required	string	target address: BDF or UNIX socket file path
dev_type	Required	string	Virtio device type: blk or scsi
vq_count	Optional	number	Number of queues this controller will utilize (default: 1)
vq_size	Optional	number	Size of each queue. Must be power of 2. (default: 512)

In case of Virtio SCSI the name parameter will be base name for new created bdevs. For Virtio Blk name will be the name of created bdev.

vq_count and vq_size parameters are valid only if trtype is user.

Result

Array of names of newly created bdevs.

Example

Example request:

{
  "params": {
    "name": "VirtioScsi0",
    "trtype": "user",
    "vq_size": 128,
    "dev_type": "scsi",
    "traddr": "/tmp/VhostScsi0",
    "vq_count": 4
  },
  "jsonrpc": "2.0",
  "method": "construct_virtio_dev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": ["VirtioScsi0t2", "VirtioScsi0t4"]
}

construct_virtio_user_scsi_bdev

This is legacy RPC method. It is equivalent of @ref rpc_construct_virtio_dev with trtype set to user and dev_type set to scsi.

Because it will be deprecated soon it is intentionally undocumented.

construct_virtio_pci_scsi_bdev

This is legacy RPC method. It is equivalent of @ref rpc_construct_virtio_dev with trtype set to pci and dev_type set to scsi.

Because it will be deprecated soon it is intentionally undocumented.

construct_virtio_user_blk_bdev

This is legacy RPC method. It is equivalent of @ref rpc_construct_virtio_dev with trtype set to user and dev_type set to blk.

Because it will be deprecated soon it is intentionally undocumented.

construct_virtio_pci_blk_bdev

This is legacy RPC method. It is equivalent of @ref rpc_construct_virtio_dev with trtype set to pci and dev_type set to blk.

Because it will be deprecated soon it is intentionally undocumented.

get_virtio_scsi_devs

Show information about all available Virtio SCSI devices.

Parameters

This method has no parameters.

Result

Array of Virtio SCSI information objects.

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "get_virtio_scsi_devs",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "name": "VirtioScsi0",
      "virtio": {
          "vq_size": 128,
          "vq_count": 4,
          "type": "user",
          "socket": "/tmp/VhostScsi0"
      }
    }
  ]
}

remove_virtio_bdev

Remove a Virtio device. This command can be used to remove any type of virtio device.

Parameters

Name	Optional	Type	Description
name	Required	string	Virtio name

Example

Example request:

{
  "params": {
    "name": "VirtioUser0"
  },
  "jsonrpc": "2.0",
  "method": "remove_virtio_bdev",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

iSCSI Target

set_iscsi_options method

Set global parameters for iSCSI targets.

This RPC may only be called before SPDK subsystems have been initialized. This RPC can be called only once.

Parameters

Name	Type	Description
auth_file	string	Path to CHAP shared secret file for discovery session (default: "/usr/local/etc/spdk/auth.conf")
node_base	string	Prefix of the name of iSCSI target node (default: "iqn.2016-06.io.spdk")
nop_timeout	number	Timeout in seconds to nop-in request to the initiator (default: 60)
nop_in_interval	number	Time interval in secs between nop-in requests by the target (default: 30)
disable_chap	boolean	CHAP for discovery session should be disabled (default: `false`)
require_chap	boolean	CHAP for discovery session should be required (default: `false`)
mutual_chap	boolean	CHAP for discovery session should be unidirectional (`false`) or bidirectional (`true`) (default: `false`)
chap_group	number	CHAP group ID for discovery session (default: 0)
max_sessions	number	Maximum number of sessions in the host (default: 128)
max_queue_depth	number	Maximum number of outstanding I/Os per queue (default: 64)
max_connections_per_session	number	Session specific parameter, MaxConnections (default: 2)
default_time2wait	number	Session specific parameter, DefaultTime2Wait (default: 2)
default_time2retain	number	Session specific parameter, DefaultTime2Retain (default: 20)
first_burst_length	number	Session specific parameter, FirstBurstLength (default: 8192)
immediate_data	boolean	Session specific parameter, ImmediateData (default: `true`)
error_recovery_level	number	Session specific parameter, ErrorRecoveryLevel (default: 0)
allow_duplicated_isid	boolean	Allow duplicated initiator session ID (default: `false`)
min_connections_per_core	number	Allocation unit of connections per core (default: 4)

Parameters disable_chap and require_chap are mutually exclusive. Parameters no_discovery_auth, req_discovery_auth, req_discovery_auth_mutual, and discovery_auth_group are still available instead of disable_chap, require_chap, mutual_chap, and chap_group, respectivey but will be removed in future releases.

Example

Example request:

{
  "params": {
    "allow_duplicated_isid": true,
    "default_time2retain": 60,
    "first_burst_length": 8192,
    "immediate_data": true,
    "node_base": "iqn.2016-06.io.spdk",
    "max_sessions": 128,
    "nop_timeout": 30,
    "nop_in_interval": 30,
    "auth_file": "/usr/local/etc/spdk/auth.conf",
    "disable_chap": true,
    "default_time2wait": 2
  },
  "jsonrpc": "2.0",
  "method": "set_iscsi_options",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_iscsi_global_params method

Show global parameters of iSCSI targets.

Parameters

This method has no parameters.

Example

Example request:

request:
{
  "jsonrpc": "2.0",
  "method": "get_iscsi_global_params",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "allow_duplicated_isid": true,
    "default_time2retain": 60,
    "first_burst_length": 8192,
    "immediate_data": true,
    "node_base": "iqn.2016-06.io.spdk",
    "mutual_chap": false,
    "nop_in_interval": 30,
    "chap_group": 0,
    "max_connections_per_session": 2,
    "max_queue_depth": 64,
    "nop_timeout": 30,
    "max_sessions": 128,
    "error_recovery_level": 0,
    "auth_file": "/usr/local/etc/spdk/auth.conf",
    "min_connections_per_core": 4,
    "disable_chap": true,
    "default_time2wait": 2,
    "require_chap": false
  }
}

set_iscsi_discovery_auth method

Set CHAP authentication for sessions dynamically.

Parameters

Name	Optional	Type	Description
disable_chap	Optional	boolean	CHAP for discovery session should be disabled (default: `false`)
require_chap	Optional	boolean	CHAP for discovery session should be required (default: `false`)
mutual_chap	Optional	boolean	CHAP for discovery session should be unidirectional (`false`) or bidirectional (`true`) (default: `false`)
chap_group	Optional	number	CHAP group ID for discovery session (default: 0)

Parameters disable_chap and require_chap are mutually exclusive.

Example

Example request:

request:
{
  "params": {
    "chap_group": 1,
    "require_chap": true,
    "mutual_chap": true
  },
  "jsonrpc": "2.0",
  "method": "set_iscsi_discovery_auth",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

add_iscsi_auth_group method

Add an authentication group for CHAP authentication.

Parameters

Name	Optional	Type	Description
tag	Required	number	Authentication group tag (unique, integer > 0)
secrets	Optional	array	Array of @ref rpc_add_iscsi_auth_group_secret objects

secret

Name	Optional	Type	Description
user	Required	string	Unidirectional CHAP name
secret	Required	string	Unidirectional CHAP secret
muser	Optional	string	Bidirectional CHAP name
msecret	Optional	string	Bidirectional CHAP secret

Example

Example request:

{
  "params": {
    "secrets": [
      {
        "muser": "mu1",
        "secret": "s1",
        "user": "u1",
        "msecret": "ms1"
      }
    ],
    "tag": 2
  },
  "jsonrpc": "2.0",
  "method": "add_iscsi_auth_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_iscsi_auth_group method

Delete an existing authentication group for CHAP authentication.

Parameters

Name	Optional	Type	Description
tag	Required	number	Authentication group tag (unique, integer > 0)

Example

Example request:

{
  "params": {
    "tag": 2
  },
  "jsonrpc": "2.0",
  "method": "delete_iscsi_auth_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

add_secret_to_iscsi_auth_group

Add a secret to an existing authentication group for CHAP authentication.

Parameters

Name	Optional	Type	Description
tag	Required	number	Authentication group tag (unique, integer > 0)
user	Required	string	Unidirectional CHAP name
secret	Required	string	Unidirectional CHAP secret
muser	Optional	string	Bidirectional CHAP name
msecret	Optional	string	Bidirectional CHAP secret

Example

Example request:

{
  "params": {
    "muser": "mu3",
    "secret": "s3",
    "tag": 2,
    "user": "u3",
    "msecret": "ms3"
  },
  "jsonrpc": "2.0",
  "method": "add_secret_to_iscsi_auth_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_secret_from_iscsi_auth_group

Delete a secret from an existing authentication group for CHAP authentication.

Parameters

Name	Optional	Type	Description
tag	Required	number	Authentication group tag (unique, integer > 0)
user	Required	string	Unidirectional CHAP name

Example

Example request:

{
  "params": {
    "tag": 2,
    "user": "u3"
  },
  "jsonrpc": "2.0",
  "method": "delete_secret_from_iscsi_auth_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_initiator_groups method

Show information about all available initiator groups.

Parameters

This method has no parameters.

Result

Array of objects describing initiator groups.

Name	Type	Description
tag	number	Initiator group tag
initiators	array	Array of initiator hostnames or IP addresses
netmasks	array	Array of initiator netmasks

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "get_initiator_groups",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "initiators": [
        "iqn.2016-06.io.spdk:host1",
        "iqn.2016-06.io.spdk:host2"
      ],
      "tag": 1,
      "netmasks": [
        "192.168.1.0/24"
      ]
    }
  ]
}

add_initiator_group method

Add an initiator group.

Parameters

Name	Optional	Type	Description
tag	Required	number	Initiator group tag (unique, integer > 0)
initiators	Required	array	Not empty array of initiator hostnames or IP addresses
netmasks	Required	array	Not empty array of initiator netmasks

Example

Example request:

{
  "params": {
    "initiators": [
      "iqn.2016-06.io.spdk:host1",
      "iqn.2016-06.io.spdk:host2"
    ],
    "tag": 1,
    "netmasks": [
      "192.168.1.0/24"
    ]
  },
  "jsonrpc": "2.0",
  "method": "add_initiator_group",
  "id": 1
}

Example response:

response:
{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_initiator_group method

Delete an existing initiator group.

Parameters

Name	Optional	Type	Description
tag	Required	number	Initiator group tag (unique, integer > 0)

Example

Example request:

{
  "params": {
    "tag": 1
  },
  "jsonrpc": "2.0",
  "method": "delete_initiator_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

add_initiators_to_initiator_group method

Add initiators to an existing initiator group.

Parameters

Name	Optional	Type	Description
tag	Required	number	Existing initiator group tag.
initiators	Optional	array	Array of initiator hostnames or IP addresses
netmasks	Optional	array	Array of initiator netmasks

Example

Example request:

request:
{
  "params": {
    "initiators": [
      "iqn.2016-06.io.spdk:host3"
    ],
    "tag": 1,
    "netmasks": [
      "255.255.255.1"
    ]
  },
  "jsonrpc": "2.0",
  "method": "add_initiators_to_initiator_group",
  "id": 1
}

Example response:

response:
{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_target_nodes method

Show information about all available iSCSI target nodes.

Parameters

This method has no parameters.

Result

Array of objects describing target node.

Name	Type	Description
name	string	Target node name (ASCII)
alias_name	string	Target node alias name (ASCII)
pg_ig_maps	array	Array of Portal_Group_Tag:Initiator_Group_Tag mappings
luns	array	Array of Bdev names to LUN ID mappings
queue_depth	number	Target queue depth
disable_chap	boolean	CHAP authentication should be disabled for this target
require_chap	boolean	CHAP authentication should be required for this target
mutual_chap	boolean	CHAP authentication should be bidirectional (`true`) or unidirectional (`false`)
chap_group	number	Authentication group ID for this target node
header_digest	boolean	Header Digest should be required for this target node
data_digest	boolean	Data Digest should be required for this target node

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "get_target_nodes",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "luns": [
        {
          "lun_id": 0,
          "bdev_name": "Nvme0n1"
        }
      ],
      "mutual_chap": false,
      "name": "iqn.2016-06.io.spdk:target1",
      "alias_name": "iscsi-target1-alias",
      "require_chap": false,
      "chap_group": 0,
      "pg_ig_maps": [
        {
          "ig_tag": 1,
          "pg_tag": 1
        }
      ],
      "data_digest": false,
      "disable_chap": false,
      "header_digest": false,
      "queue_depth": 64
    }
  ]
}

construct_target_node method

Add a iSCSI target node.

Parameters

Name	Optional	Type	Description
name	Required	string	Target node name (ASCII)
alias_name	Required	string	Target node alias name (ASCII)
pg_ig_maps	Required	array	Array of (Portal_Group_Tag:Initiator_Group_Tag) mappings
luns	Required	array	Array of Bdev names to LUN ID mappings
queue_depth	Required	number	Target queue depth
disable_chap	Optional	boolean	CHAP authentication should be disabled for this target
require_chap	Optional	boolean	CHAP authentication should be required for this target
mutual_chap	Optional	boolean	CHAP authentication should be bidirectional (`true`) or unidirectional (`false`)
chap_group	Optional	number	Authentication group ID for this target node
header_digest	Optional	boolean	Header Digest should be required for this target node
data_digest	Optional	boolean	Data Digest should be required for this target node

Parameters disable_chap and require_chap are mutually exclusive.

Example

Example request:

{
  "params": {
    "luns": [
      {
        "lun_id": 0,
        "bdev_name": "Nvme0n1"
      }
    ],
    "mutual_chap": true,
    "name": "target2",
    "alias_name": "iscsi-target2-alias",
    "pg_ig_maps": [
      {
        "ig_tag": 1,
        "pg_tag": 1
      },
      {
        "ig_tag": 2,
        "pg_tag": 2
      }
    ],
    "data_digest": true,
    "disable_chap": true,
    "header_digest": true,
    "queue_depth": 24
  },
  "jsonrpc": "2.0",
  "method": "construct_target_node",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

set_iscsi_target_node_auth method

Set CHAP authentication to an existing iSCSI target node.

Parameters

Name	Optional	Type	Description
name	Required	string	Target node name (ASCII)
disable_chap	Optional	boolean	CHAP authentication should be disabled for this target
require_chap	Optional	boolean	CHAP authentication should be required for this target
mutual_chap	Optional	boolean	CHAP authentication should be bidirectional (`true`) or unidirectional (`false`)
chap_group	Optional	number	Authentication group ID for this target node

Parameters disable_chap and require_chap are mutually exclusive.

Example

Example request:

{
  "params": {
    "chap_group": 1,
    "require_chap": true,
    "name": "iqn.2016-06.io.spdk:target1",
    "mutual_chap": true
  },
  "jsonrpc": "2.0",
  "method": "set_iscsi_target_node_auth",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

add_pg_ig_maps method

Add initiator group to portal group mappings to an existing iSCSI target node.

Parameters

Name	Optional	Type	Description
name	Required	string	Target node name (ASCII)
pg_ig_maps	Required	array	Not empty array of initiator to portal group mappings objects

Portal to Initiator group mappings object:

Name	Optional	Type	Description
ig_tag	Required	number	Existing initiator group tag
pg_tag	Required	number	Existing portal group tag

Example

Example request:

{
  "params": {
    "pg_ig_maps": [
      {
        "ig_tag": 1,
        "pg_tag": 1
      },
      {
        "ig_tag": 2,
        "pg_tag": 2
      },
      {
        "ig_tag": 3,
        "pg_tag": 3
      }
    ],
    "name": "iqn.2016-06.io.spdk:target3"
  },
  "jsonrpc": "2.0",
  "method": "add_pg_ig_maps",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_pg_ig_maps method

Delete initiator group to portal group mappings from an existing iSCSI target node.

Parameters

Name	Optional	Type	Description
name	Required	string	Target node name (ASCII)
pg_ig_maps	Required	array	Not empty array of Portal to Initiator group mappings objects

Portal to Initiator group mappings object:

Name	Optional	Type	Description
ig_tag	Required	number	Existing initiator group tag
pg_tag	Required	number	Existing portal group tag

Example

Example request:

{
  "params": {
    "pg_ig_maps": [
      {
        "ig_tag": 1,
        "pg_tag": 1
      },
      {
        "ig_tag": 2,
        "pg_tag": 2
      },
      {
        "ig_tag": 3,
        "pg_tag": 3
      }
    ],
    "name": "iqn.2016-06.io.spdk:target3"
  },
  "jsonrpc": "2.0",
  "method": "delete_pg_ig_maps",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_target_node method

Delete a iSCSI target node.

Parameters

Name	Optional	Type	Description
name	Required	string	Target node name (ASCII)

Example

Example request:

{
  "params": {
    "name": "iqn.2016-06.io.spdk:target1"
  },
  "jsonrpc": "2.0",
  "method": "delete_target_node",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_portal_groups method

Show information about all available portal groups.

Parameters

This method has no parameters.

Example

Example request:

request:
{
  "jsonrpc": "2.0",
  "method": "get_portal_groups",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "portals": [
        {
          "cpumask": "0x2",
          "host": "127.0.0.1",
          "port": "3260"
        }
      ],
      "tag": 1
    }
  ]
}

add_portal_group method

Add a portal group.

Parameters

Name	Optional	Type	Description
tag	Required	number	Portal group tag
portals	Required	array	Not empty array of portals

Portal object

Name	Optional	Type	Description
host	Required	string	Hostname or IP address
port	Required	string	Port number

Example

Example request:

{
  "params": {
    "portals": [
      {
        "host": "127.0.0.1",
        "port": "3260"
      }
    ],
    "tag": 1
  },
  "jsonrpc": "2.0",
  "method": "add_portal_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_portal_group method

Delete an existing portal group.

Parameters

Name	Optional	Type	Description
tag	Required	number	Existing portal group tag

Example

Example request:

{
  "params": {
    "tag": 1
  },
  "jsonrpc": "2.0",
  "method": "delete_portal_group",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_iscsi_connections method

Show information about all active connections.

Parameters

This method has no parameters.

Results

Array of objects describing iSCSI connection.

Name	Type	Description
id	number	Index (used for TTT - Target Transfer Tag)
cid	number	CID (Connection ID)
tsih	number	TSIH (Target Session Identifying Handle)
lcore_id	number	Core number on which the iSCSI connection runs
initiator_addr	string	Initiator address
target_addr	string	Target address
target_node_name	string	Target node name (ASCII) without prefix

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "get_iscsi_connections",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "tsih": 4,
      "cid": 0,
      "target_node_name": "target1",
      "lcore_id": 0,
      "initiator_addr": "10.0.0.2",
      "target_addr": "10.0.0.1",
      "id": 0
    }
  ]
}

target_node_add_lun method

Add an LUN to an existing iSCSI target node.

Parameters

Name	Optional	Type	Description
name	Required	string	Target node name (ASCII)
bdev_name	Required	string	bdev name to be added as a LUN
lun_id	Optional	number	LUN ID (default: first free ID)

Example

Example request:

{
  "params": {
    "lun_id": 2,
    "name": "iqn.2016-06.io.spdk:target1",
    "bdev_name": "Malloc0"
  },
  "jsonrpc": "2.0",
  "method": "target_node_add_lun",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

NVMe-oF Target

get_nvmf_subsystems method

Parameters

This method has no parameters.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "get_nvmf_subsystems"
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "nqn": "nqn.2014-08.org.nvmexpress.discovery",
      "subtype": "Discovery"
      "listen_addresses": [],
      "hosts": [],
      "allow_any_host": true
    },
    {
      "nqn": "nqn.2016-06.io.spdk:cnode1",
      "subtype": "NVMe",
      "listen_addresses": [
        {
          "trtype": "RDMA",
          "adrfam": "IPv4",
          "traddr": "192.168.0.123",
          "trsvcid": "4420"
        }
      ],
      "hosts": [
        {"nqn": "nqn.2016-06.io.spdk:host1"}
      ],
      "allow_any_host": false,
      "serial_number": "abcdef",
      "namespaces": [
        {"nsid": 1, "name": "Malloc2"},
        {"nsid": 2, "name": "Nvme0n1"}
      ]
    }
  ]
}

construct_nvmf_subsystem method

Construct an NVMe over Fabrics target subsystem.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
listen_addresses	Optional	array	Array of @ref rpc_construct_nvmf_subsystem_listen_address objects
hosts	Optional	array	Array of strings containing allowed host NQNs. Default: No hosts allowed.
allow_any_host	Optional	boolean	Allow any host (`true`) or enforce allowed host whitelist (`false`). Default: `false`.
serial_number	Required	string	Serial number of virtual controller
namespaces	Optional	array	Array of @ref rpc_construct_nvmf_subsystem_namespace objects. Default: No namespaces.
max_namespaces	Optional	number	Maximum number of namespaces that can be attached to the subsystem. Default: 0 (Unlimited)

listen_address

Name	Optional	Type	Description
trtype	Required	string	Transport type ("RDMA")
adrfam	Required	string	Address family ("IPv4", "IPv6", "IB", or "FC")
traddr	Required	string	Transport address
trsvcid	Required	string	Transport service ID

namespace

Name	Optional	Type	Description
nsid	Optional	number	Namespace ID between 1 and 4294967294, inclusive. Default: Automatically assign NSID.
bdev_name	Required	string	Name of bdev to expose as a namespace.
nguid	Optional	string	16-byte namespace globally unique identifier in hexadecimal (e.g. "ABCDEF0123456789ABCDEF0123456789")
eui64	Optional	string	8-byte namespace EUI-64 in hexadecimal (e.g. "ABCDEF0123456789")
uuid	Optional	string	RFC 4122 UUID (e.g. "ceccf520-691e-4b46-9546-34af789907c5")

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "construct_nvmf_subsystem",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "listen_addresses": [
      {
        "trtype": "RDMA",
        "adrfam": "IPv4",
        "traddr": "192.168.0.123",
        "trsvcid: "4420"
      }
    ],
    "hosts": [
      "nqn.2016-06.io.spdk:host1",
      "nqn.2016-06.io.spdk:host2"
    ],
    "allow_any_host": false,
    "serial_number": "abcdef",
    "namespaces": [
      {"nsid": 1, "bdev_name": "Malloc2"},
      {"nsid": 2, "bdev_name": "Nvme0n1"}
    ]
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

delete_nvmf_subsystem method

Delete an existing NVMe-oF subsystem.

Parameters

Parameter	Optional	Type	Description
nqn	Required	string	Subsystem NQN to delete.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "delete_nvmf_subsystem",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

nvmf_subsystem_add_listener method

Add a new listen address to an NVMe-oF subsystem.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
listen_address	Required	object	@ref rpc_construct_nvmf_subsystem_listen_address object

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "nvmf_subsystem_add_listener",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "listen_address": {
      "trtype": "RDMA",
      "adrfam": "IPv4",
      "traddr": "192.168.0.123",
      "trsvcid: "4420"
    }
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

nvmf_subsystem_add_ns method

Add a namespace to a subsystem. The namespace ID is returned as the result.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
namespace	Required	object	@ref rpc_construct_nvmf_subsystem_namespace object

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "nvmf_subsystem_add_ns",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "namespace": {
      "nsid": 3,
      "bdev_name": "Nvme0n1"
    }
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": 3
}

nvmf_subsystem_remove_ns method

Remove a namespace from a subsystem.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
nsid	Required	number	Namespace ID

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "nvmf_subsystem_remove_ns",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "nsid": 1
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

nvmf_subsystem_add_host method

Add a host NQN to the whitelist of allowed hosts.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
host	Required	string	Host NQN to add to the list of allowed host NQNs

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "nvmf_subsystem_add_host",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "host": "nqn.2016-06.io.spdk:host1"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

nvmf_subsystem_remove_host method

Remove a host NQN from the whitelist of allowed hosts.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
host	Required	string	Host NQN to remove from the list of allowed host NQNs

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "nvmf_subsystem_remove_host",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "host": "nqn.2016-06.io.spdk:host1"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

nvmf_subsystem_allow_any_host method

Configure a subsystem to allow any host to connect or to enforce the host NQN whitelist.

Parameters

Name	Optional	Type	Description
nqn	Required	string	Subsystem NQN
allow_any_host	Required	boolean	Allow any host (`true`) or enforce allowed host whitelist (`false`).

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "nvmf_subsystem_allow_any_host",
  "params": {
    "nqn": "nqn.2016-06.io.spdk:cnode1",
    "allow_any_host": true
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

set_nvmf_target_options

Set global parameters for the NVMe-oF target. This RPC may only be called before SPDK subsystems have been initialized.

Parameters

Name	Optional	Type	Description
max_queue_depth	Optional	number	Maximum number of outstanding I/Os per queue
max_qpairs_per_ctrlr	Optional	number	Maximum number of SQ and CQ per controller
in_capsule_data_size	Optional	number	Maximum number of in-capsule data size
max_io_size	Optional	number	Maximum I/O size (bytes)
max_subsystems	Optional	number	Maximum number of NVMe-oF subsystems
io_unit_size	Optional	number	I/O unit size (bytes)

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "set_nvmf_target_options",
  "params": {
    "in_capsule_data_size": 4096,
    "io_unit_size": 131072,
    "max_qpairs_per_ctrlr": 64,
    "max_queue_depth": 128,
    "max_io_size": 131072,
    "max_subsystems": 1024
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

set_nvmf_target_config

Set global configuration of NVMe-oF target. This RPC may only be called before SPDK subsystems have been initialized.

Parameters

Name	Optional	Type	Description
acceptor_poll_rate	Optional	number	Polling interval of the acceptor for incoming connections (microseconds)

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "set_nvmf_target_config",
  "params": {
    "acceptor_poll_rate": 10000
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

Vhost Target

The following common preconditions need to be met in all target types.

Controller name will be used to create UNIX domain socket. This implies that name concatenated with vhost socket directory path needs to be valid UNIX socket name.

@ref cpu_mask parameter is used to choose CPU on which pollers will be launched when new initiator is connecting. It must be a subset of application CPU mask. Default value is CPU mask of the application.

set_vhost_controller_coalescing

Controls interrupt coalescing for specific target. Because delay_base_us is used to calculate delay in CPU ticks there is no hardcoded limit for this parameter. Only limitation is that final delay in CPU ticks might not overflow 32 bit unsigned integer (which is more than 1s @ 4GHz CPU). In real scenarios delay_base_us should be much lower than 150us. To disable coalescing set delay_base_us to 0.

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
delay_base_us	Required	number	Base (minimum) coalescing time in microseconds
iops_threshold	Required	number	Coalescing activation level greater than 0 in IO per second

Example

Example request:

{
  "params": {
    "iops_threshold": 100000,
    "ctrlr": "VhostScsi0",
    "delay_base_us": 80
  },
  "jsonrpc": "2.0",
  "method": "set_vhost_controller_coalescing",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_vhost_scsi_controller

Construct vhost SCSI target.

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
cpumask	Optional	string	@ref cpu_mask for this controller

Example

Example request:

{
  "params": {
    "cpumask": "0x2",
    "ctrlr": "VhostScsi0"
  },
  "jsonrpc": "2.0",
  "method": "construct_vhost_scsi_controller",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

add_vhost_scsi_lun

In vhost target ctrlr create SCSI target with ID scsi_target_num and add bdev_name as LUN 0.

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
scsi_target_num	Required	number	SCSI target ID between 0 and 7
bdev_name	Required	string	Name of bdev to expose as a LUN 0

Example

Example request:

{
  "params": {
    "scsi_target_num": 1,
    "bdev_name": "Malloc0",
    "ctrlr": "VhostScsi0"
  },
  "jsonrpc": "2.0",
  "method": "add_vhost_scsi_lun",
  "id": 1
}

Example response:

response:
{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

remove_vhost_scsi_target

Remove SCSI target ID scsi_target_num from vhost target scsi_target_num.

This method will fail if initiator is connected, but doesn't support hot-remove (the VIRTIO_SCSI_F_HOTPLUG is not negotiated).

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
scsi_target_num	Required	number	SCSI target ID between 0 and 7

Example

Example request:

request:
{
  "params": {
    "scsi_target_num": 1,
    "ctrlr": "VhostScsi0"
  },
  "jsonrpc": "2.0",
  "method": "remove_vhost_scsi_target",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_vhost_nvme_controller

Construct empty vhost NVMe controller.

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
io_queues	Required	number	Number between 1 and 31 of IO queues for the controller
cpumask	Optional	string	@ref cpu_mask for this controller

Example

Example request:

{
  "params": {
    "cpumask": "0x2",
    "io_queues": 4,
    "ctrlr": "VhostNvme0"
  },
  "jsonrpc": "2.0",
  "method": "construct_vhost_nvme_controller",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

add_vhost_nvme_ns

Add namespace backed by bdev_name

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
bdev_name	Required	string	Name of bdev to expose as a namespace
cpumask	Optional	string	@ref cpu_mask for this controller

Example

Example request:

{
  "params": {
    "bdev_name": "Malloc0",
    "ctrlr": "VhostNvme0"
  },
  "jsonrpc": "2.0",
  "method": "add_vhost_nvme_ns",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_vhost_blk_controller

Construct vhost block controller

If readonly is true then vhost block target will be created as read only and fail any write requests. The VIRTIO_BLK_F_RO feature flag will be offered to the initiator.

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name
bdev_name	Required	string	Name of bdev to expose block device
readonly	Optional	boolean	If true, this target will be read only (default: false)
cpumask	Optional	string	@ref cpu_mask for this controller

Example

Example request:

{
  "params": {
    "dev_name": "Malloc0",
    "ctrlr": "VhostBlk0"
  },
  "jsonrpc": "2.0",
  "method": "construct_vhost_blk_controller",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_vhost_controllers

Display information about all vhost controllers.

Parameters

This method has no parameters.

Response

Response is an array of objects describing each controllers. Common fields are:

Name	Type	Description
ctrlr	string	Controller name
cpumask	string	@ref cpu_mask of this controller
delay_base_us	number	Base (minimum) coalescing time in microseconds (0 if disabled)
iops_threshold	number	Coalescing activation level
backend_specific	object	Backend specific informations

Vhost block

backend_specific contains one block object of type:

Name	Type	Description
bdev	string	Backing bdev name or Null if bdev is hot-removed
readonly	boolean	True if controllers is readonly, false otherwise

Vhost SCSI

backend_specific contains scsi array of following objects:

Name	Type	Description
target_name	string	Name of this SCSI target
id	number	Unique SPDK global SCSI target ID
scsi_dev_num	number	SCSI target ID initiator will see when scanning this controller
luns	array	array of objects describing @ref rpc_get_vhost_controllers_scsi_luns

Vhost SCSI LUN

Object of type:

Name	Type	Description
id	number	SCSI LUN ID
bdev_name	string	Backing bdev name

Vhost NVMe

backend_specific contains namespaces array of following objects:

Name	Type	Description
nsid	number	Namespace ID
bdev	string	Backing bdev name

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "get_vhost_controllers",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "cpumask": "0x2",
      "backend_specific": {
        "block": {
          "readonly": false,
          "bdev": "Malloc0"
        }
      },
      "iops_threshold": 60000,
      "ctrlr": "VhostBlk0",
      "delay_base_us": 100
    },
    {
      "cpumask": "0x2",
      "backend_specific": {
        "scsi": [
          {
            "target_name": "Target 2",
            "luns": [
              {
                "id": 0,
                "bdev_name": "Malloc1"
              }
            ],
            "id": 0,
            "scsi_dev_num": 2
          },
          {
            "target_name": "Target 5",
            "luns": [
              {
                "id": 0,
                "bdev_name": "Malloc2"
              }
            ],
            "id": 1,
            "scsi_dev_num": 5
          }
        ]
      },
      "iops_threshold": 60000,
      "ctrlr": "VhostScsi0",
      "delay_base_us": 0
    },
    {
      "cpumask": "0x2",
      "backend_specific": {
        "namespaces": [
          {
            "bdev": "Malloc3",
            "nsid": 1
          },
          {
            "bdev": "Malloc4",
            "nsid": 2
          }
        ]
      },
      "iops_threshold": 60000,
      "ctrlr": "VhostNvme0",
      "delay_base_us": 0
    }
  ]
}

remove_vhost_controller

Remove vhost target.

This call will fail if there is an initiator connected or there is at least one SCSI target configured in case of vhost SCSI target. In the later case please remove all SCSI targets first using @ref rpc_remove_vhost_scsi_target.

Parameters

Name	Optional	Type	Description
ctrlr	Required	string	Controller name

Example

Example request:

{
  "params": {
    "ctrlr": "VhostNvme0"
  },
  "jsonrpc": "2.0",
  "method": "remove_vhost_controller",
  "id": 1
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

Logical Volume

Identification of logical volume store and logical volume is explained first.

A logical volume store has a UUID and a name for its identification. The UUID is generated on creation and it can be used as a unique identifier. The name is specified on creation and can be renamed. Either UUID or name is used to access logical volume store in RPCs.

A logical volume has a UUID and a name for its identification. The UUID of the logical volume is generated on creation and it can be unique identifier. The alias of the logical volume takes the format lvs_name/lvol_name where:

lvs_name is the name of the logical volume store.
lvol_name is specified on creation and can be renamed.

construct_lvol_store

Construct a logical volume store.

Parameters

Name	Optional	Type	Description
bdev_name	Required	string	Bdev on which to construct logical volume store
lvs_name	Required	string	Name of the logical volume store to create
cluster_sz	Optional	number	Cluster size of the logical volume store in bytes

Response

UUID of the created logical volume store is returned.

Example

Example request:

{
  "jsonrpc": "2.0",
  "id": 1,
  "method": "construct_lvol_store",
  "params": {
    "lvs_name": "LVS0",
    "bdev_name": "Malloc0"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "a9959197-b5e2-4f2d-8095-251ffb6985a5"
}

destroy_lvol_store

Destroy a logical volume store.

Parameters

Name	Optional	Type	Description
uuid	Optional	string	UUID of the logical volume store to destroy
lvs_name	Optional	string	Name of the logical volume store to destroy

Either uuid or lvs_name must be specified, but not both.

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "destroy_lvol_store",
  "id": 1
  "params": {
    "uuid": "a9959197-b5e2-4f2d-8095-251ffb6985a5"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

get_lvol_stores

Get a list of logical volume stores.

Parameters

Name	Optional	Type	Description
uuid	Optional	string	UUID of the logical volume store to retrieve information about
lvs_name	Optional	string	Name of the logical volume store to retrieve information about

Either uuid or lvs_name may be specified, but not both. If both uuid and lvs_name are omitted, information about all logical volume stores is returned.

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "get_lvol_stores",
  "id": 1,
  "params": {
    "lvs_name": "LVS0"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    {
      "uuid": "a9959197-b5e2-4f2d-8095-251ffb6985a5",
      "base_bdev": "Malloc0",
      "free_clusters": 31,
      "cluster_size": 4194304,
      "total_data_clusters": 31,
      "block_size": 4096,
      "name": "LVS0"
    }
  ]
}

rename_lvol_store

Rename a logical volume store.

Parameters

Name	Optional	Type	Description
old_name	Required	string	Existing logical volume store name
new_name	Required	string	New logical volume store name

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "rename_lvol_store",
  "id": 1,
  "params": {
    "old_name": "LVS0",
    "new_name": "LVS2"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

construct_lvol_bdev

Create a logical volume on a logical volume store.

Parameters

Name	Optional	Type	Description
lvol_name	Required	string	Name of logical volume to create
size	Required	number	Desired size of logical volume in bytes
thin_provision	Optional	boolean	True to enable thin provisioning
uuid	Optional	string	UUID of logical volume store to create logical volume on
lvs_name	Optional	string	Name of logical volume store to create logical volume on

Size will be rounded up to a multiple of cluster size. Either uuid or lvs_name must be specified, but not both. lvol_name will be used in the alias of the created logical volume.

Response

UUID of the created logical volume is returned.

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "construct_lvol_bdev",
  "id": 1,
  "params": {
    "lvol_name": "LVOL0",
    "size": 1048576,
    "lvs_name": "LVS0",
    "thin_provision": true
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "1b38702c-7f0c-411e-a962-92c6a5a8a602"
}

snapshot_lvol_bdev

Capture a snapshot of the current state of a logical volume.

Parameters

Name	Optional	Type	Description
lvol_name	Required	string	UUID or alias of the logical volume to create a snapshot from
snapshot_name	Required	string	Name for the newly created snapshot

Response

UUID of the created logical volume snapshot is returned.

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "snapshot_lvol_bdev",
  "id": 1,
  "params": {
    "lvol_name": "1b38702c-7f0c-411e-a962-92c6a5a8a602",
    "snapshot_name": "SNAP1"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "cc8d7fdf-7865-4d1f-9fc6-35da8e368670"
}

clone_lvol_bdev

Create a logical volume based on a snapshot.

Parameters

Name	Optional	Type	Description
snapshot_name	Required	string	UUID or alias of the snapshot to clone
clone_name	Required	string	Name for the logical volume to create

Response

UUID of the created logical volume clone is returned.

Example

Example request:

{
  "jsonrpc": "2.0"
  "method": "clone_lvol_bdev",
  "id": 1,
  "params": {
    "snapshot_name": "cc8d7fdf-7865-4d1f-9fc6-35da8e368670",
    "clone_name": "CLONE1"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "8d87fccc-c278-49f0-9d4c-6237951aca09"
}

rename_lvol_bdev

Rename a logical volume. New name will rename only the alias of the logical volume.

Parameters

Name	Optional	Type	Description
old_name	Required	string	UUID or alias of the existing logical volume
new_name	Required	string	New logical volume name

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "rename_lvol_bdev",
  "id": 1,
  "params": {
    "old_name": "067df606-6dbc-4143-a499-0d05855cb3b8",
    "new_name": "LVOL2"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

resize_lvol_bdev

Resize a logical volume.

Parameters

Name	Optional	Type	Description
name	Required	string	UUID or alias of the logical volume to resize
size	Required	number	Desired size of the logical volume in bytes

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "resize_lvol_bdev",
  "id": 1,
  "params": {
    "name": "51638754-ca16-43a7-9f8f-294a0805ab0a",
    "size": 2097152
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

destroy_lvol_bdev

Destroy a logical volume.

Parameters

Name	Optional	Type	Description
name	Required	string	UUID or alias of the logical volume to destroy

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "destroy_lvol_bdev",
  "id": 1,
  "params": {
    "name": "51638754-ca16-43a7-9f8f-294a0805ab0a"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

inflate_lvol_bdev

Inflate a logical volume. All unallocated clusters are allocated and copied from the parent or zero filled if not allocated in the parent. Then all dependencies on the parent are removed.

Parameters

Name	Optional	Type	Description
name	Required	string	UUID or alias of the logical volume to inflate

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "inflate_lvol_bdev",
  "id": 1,
  "params": {
    "name": "8d87fccc-c278-49f0-9d4c-6237951aca09"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

decouple_parent_lvol_bdev

Decouple the parent of a logical volume. For unallocated clusters which is allocated in the parent, they are allocated and copied from the parent, but for unallocated clusters which is thin provisioned in the parent, they are kept thin provisioned. Then all dependencies on the parent are removed.

Parameters

Name	Optional	Type	Description
name	Required	string	UUID or alias of the logical volume to decouple the parent of it

Example

Example request:

{
  "jsonrpc": "2.0",
  "method": "decouple_parent_lvol_bdev",
  "id": 1.
  "params": {
    "name": "8d87fccc-c278-49f0-9d4c-6237951aca09"
  }
}

Example response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": true
}

90 KiB Raw Blame History

JSON-RPC Methods

Overview

Parameters

Required parameters

Optional parameters

Error response message

Parser error

Invalid params

App Framework

kill_instance

Parameters

Example

context_switch_monitor

Parameters

Response

Example

start_subsystem_init

Parameters

Response

Example

get_rpc_methods

Parameters

Response

Example

get_subsystems

Parameters

Response

Example

get_subsystem_config

Parameters

Response

Example

Block Device Abstraction Layer

set_bdev_options

Parameters

Example

get_bdevs

Parameters

Response

Example

get_bdevs_iostat

Parameters

Response

Example

delete_bdev

Parameters

Example

set_bdev_qos_limit_iops

Parameters

Example

construct_malloc_bdev

Parameters

Result

Example

delete_malloc_bdev

Parameters

Example

construct_null_bdev

Parameters

Result

Example

delete_null_bdev

Parameters

Example

construct_aio_bdev

Parameters

Result

Example

delete_aio_bdev

Parameters

Example

set_bdev_nvme_options

Parameters

Example

set_bdev_nvme_hotplug

Parameters

Example

construct_nvme_bdev

Result

90 KiB

Raw Blame History