6c275b7a63
Added a user guide that shows how to use tracepoints to trace inspect the behavior of an SPDK application. Change-Id: Ibc2af2a2cbf0cd4a2a4600949cbe5e1cbe5c40cb Signed-off-by: John Kariuki <John.K.Kariuki@intel.com> Reviewed-on: https://review.gerrithub.io/417292 Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
11 KiB
NVMe-oF Target Tracepoints
Introduction
SPDK has a tracing framework for capturing low-level event information at runtime. Tracepoints provide a high-performance tracing mechanism that is accessible at runtime. They are implemented as a circular buffer in shared memory that is accessible from other processes. The NVMe-oF target is instrumented with tracepoints to enable analysis of both performance and application crashes. (Note: the SPDK tracing framework should still be considered experimental. Work to formalize and document the framework is in progress.)
Enabling Tracepoints
Tracepoints are placed in groups. They are enabled and disabled as a group. To enable the instrumentation of all the tracepoints group in an SPDK target application, start the target with -e parameter set to 0xFFFF:
app/nvmf_tgt/nvmf_tgt -e 0xFFFF
To enable the instrumentation of just the NVMe-oF RDMA tracepoints in an SPDK target application, start the target with the -e parameter set to 0x10:
app/nvmf_tgt/nvmf_tgt -e 0x10
When the target starts, a message is logged with the information you need to view the tracepoints in a human-readable format using the spdk_trace application. The target will also log information about the shared memory file.
app.c: 527:spdk_app_setup_trace: *NOTICE*: Tracepoint Group Mask 0xFFFF specified.
app.c: 531:spdk_app_setup_trace: *NOTICE*: Use 'spdk_trace -s nvmf -p 24147' to capture a snapshot of events at runtime.
app.c: 533:spdk_app_setup_trace: *NOTICE*: Or copy /dev/shm/nvmf_trace.pid24147 for offline analysis/debug.
Note that when tracepoints are enabled, the shared memory files are not deleted when the application exits. This ensures the file can be used for analysis after the application exits. On Linux, the shared memory files are in /dev/shm, and can be deleted manually to free shm space if needed. A system reboot will also free all of the /dev/shm files.
Capturing a snapshot of events
Send I/Os to the SPDK target application to generate events. The following is an example usage of perf to send I/Os to the NVMe-oF target over an RDMA network interface for 10 minutes.
./perf -q 128 -s 4096 -w randread -t 600 -r 'trtype:RDMA adrfam:IPv4 traddr:192.168.100.2 trsvcid:4420'
The spdk_trace program can be found in the app/trace directory. To analyze the tracepoints on the same system running the NVMe-oF target, simply execute the command line shown in the log:
app/trace/spdk_trace -s nvmf -p 24147
To analyze the tracepoints on a different system, first prepare the tracepoint file for transfer. The tracepoint file can be large, but usually compresses very well. This step can also be used to prepare a tracepoint file to attach to a GitHub issue for debugging NVMe-oF application crashes.
bzip2 -c /dev/shm/nvmf_trace.pid24147 > /tmp/trace.bz2
After transferring the /tmp/trace.bz2 tracepoint file to a different system:
bunzip2 /tmp/trace.bz2
app/trace/spdk_trace -f /tmp/trace
The following is sample trace capture showing the cumulative time that each I/O spends at each RDMA state. All the trace captures with the same id are for the same I/O.
28: 6026.658 ( 12656064) RDMA_REQ_NEED_BUFFER id: r3622 time: 0.019
28: 6026.694 ( 12656140) RDMA_REQ_RDY_TO_EXECUTE id: r3622 time: 0.055
28: 6026.820 ( 12656406) RDMA_REQ_EXECUTING id: r3622 time: 0.182
28: 6026.992 ( 12656766) RDMA_REQ_EXECUTED id: r3477 time: 228.510
28: 6027.010 ( 12656804) RDMA_REQ_TX_PENDING_C_TO_H id: r3477 time: 228.528
28: 6027.022 ( 12656828) RDMA_REQ_RDY_TO_COMPLETE id: r3477 time: 228.539
28: 6027.115 ( 12657024) RDMA_REQ_COMPLETING id: r3477 time: 228.633
28: 6027.471 ( 12657770) RDMA_REQ_COMPLETED id: r3518 time: 171.577
28: 6028.027 ( 12658940) RDMA_REQ_NEW id: r3623
28: 6028.057 ( 12659002) RDMA_REQ_NEED_BUFFER id: r3623 time: 0.030
28: 6028.095 ( 12659082) RDMA_REQ_RDY_TO_EXECUTE id: r3623 time: 0.068
28: 6028.216 ( 12659336) RDMA_REQ_EXECUTING id: r3623 time: 0.189
28: 6028.408 ( 12659740) RDMA_REQ_EXECUTED id: r3505 time: 190.509
28: 6028.441 ( 12659808) RDMA_REQ_TX_PENDING_C_TO_H id: r3505 time: 190.542
28: 6028.452 ( 12659832) RDMA_REQ_RDY_TO_COMPLETE id: r3505 time: 190.553
28: 6028.536 ( 12660008) RDMA_REQ_COMPLETING id: r3505 time: 190.637
28: 6028.854 ( 12660676) RDMA_REQ_COMPLETED id: r3465 time: 247.000
28: 6029.433 ( 12661892) RDMA_REQ_NEW id: r3624
28: 6029.452 ( 12661932) RDMA_REQ_NEED_BUFFER id: r3624 time: 0.019
28: 6029.482 ( 12661996) RDMA_REQ_RDY_TO_EXECUTE id: r3624 time: 0.050
28: 6029.591 ( 12662224) RDMA_REQ_EXECUTING id: r3624 time: 0.158
28: 6029.782 ( 12662624) RDMA_REQ_EXECUTED id: r3564 time: 96.937
28: 6029.798 ( 12662658) RDMA_REQ_TX_PENDING_C_TO_H id: r3564 time: 96.953
28: 6029.812 ( 12662688) RDMA_REQ_RDY_TO_COMPLETE id: r3564 time: 96.967
28: 6029.899 ( 12662870) RDMA_REQ_COMPLETING id: r3564 time: 97.054
28: 6030.262 ( 12663634) RDMA_REQ_COMPLETED id: r3477 time: 231.780
28: 6030.786 ( 12664734) RDMA_REQ_NEW id: r3625
28: 6030.804 ( 12664772) RDMA_REQ_NEED_BUFFER id: r3625 time: 0.018
28: 6030.841 ( 12664848) RDMA_REQ_RDY_TO_EXECUTE id: r3625 time: 0.054
28: 6030.963 ( 12665104) RDMA_REQ_EXECUTING id: r3625 time: 0.176
28: 6031.139 ( 12665474) RDMA_REQ_EXECUTED id: r3552 time: 114.906
28: 6031.196 ( 12665594) RDMA_REQ_TX_PENDING_C_TO_H id: r3552 time: 114.963
28: 6031.210 ( 12665624) RDMA_REQ_RDY_TO_COMPLETE id: r3552 time: 114.977
28: 6031.293 ( 12665798) RDMA_REQ_COMPLETING id: r3552 time: 115.060
28: 6031.633 ( 12666512) RDMA_REQ_COMPLETED id: r3505 time: 193.734
28: 6032.230 ( 12667766) RDMA_REQ_NEW id: r3626
28: 6032.248 ( 12667804) RDMA_REQ_NEED_BUFFER id: r3626 time: 0.018
28: 6032.288 ( 12667888) RDMA_REQ_RDY_TO_EXECUTE id: r3626 time: 0.058
28: 6032.396 ( 12668114) RDMA_REQ_EXECUTING id: r3626 time: 0.166
28: 6032.593 ( 12668528) RDMA_REQ_EXECUTED id: r3570 time: 90.443
28: 6032.611 ( 12668564) RDMA_REQ_TX_PENDING_C_TO_H id: r3570 time: 90.460
28: 6032.623 ( 12668590) RDMA_REQ_RDY_TO_COMPLETE id: r3570 time: 90.473
28: 6032.707 ( 12668766) RDMA_REQ_COMPLETING id: r3570 time: 90.557
28: 6033.056 ( 12669500) RDMA_REQ_COMPLETED id: r3564 time: 100.211
Adding New Tracepoints
SPDK applications and libraries provide several trace points. You can add new tracepoints to the existing trace groups. For example, to add a new tracepoints to the SPDK RDMA library (lib/nvmf/rdma.c) trace group TRACE_GROUP_NVMF_RDMA, define the tracepoints and assigning them a unique ID using the SPDK_TPOINT_ID macro:
#define TRACE_GROUP_NVMF_RDMA 0x4
#define TRACE_RDMA_REQUEST_STATE_NEW SPDK_TPOINT_ID(TRACE_GROUP_NVMF_RDMA, 0x0)
...
#define NEW_TRACE_POINT_NAME SPDK_TPOINT_ID(TRACE_GROUP_NVMF_RDMA, UNIQUE_ID)
You also need to register the new trace points in the SPDK_TRACE_REGISTER_FN macro call within the application/library using the spdk_trace_register_description function as shown below:
SPDK_TRACE_REGISTER_FN(nvmf_trace)
{
spdk_trace_register_object(OBJECT_NVMF_RDMA_IO, 'r');
spdk_trace_register_description("RDMA_REQ_NEW", "",
TRACE_RDMA_REQUEST_STATE_NEW,
OWNER_NONE, OBJECT_NVMF_RDMA_IO, 1, 1, "cmid: ");
...
spdk_trace_register_description("NEW_RDMA_REQ_NAME", "",
NEW_TRACE_POINT_NAME,
OWNER_NONE, OBJECT_NVMF_RDMA_IO, 0, 1, "cmid: ");
}
Finally, use the spdk_trace_record function at the appropriate point in the application/library to record the current trace state for the new trace points. The following example shows the usage of the spdk_trace_record function to record the current trace state of several tracepoints.
case RDMA_REQUEST_STATE_NEW:
spdk_trace_record(TRACE_RDMA_REQUEST_STATE_NEW, 0, 0, (uintptr_t)rdma_req, (uintptr_t)rqpair->cm_id);
...
break;
case RDMA_REQUEST_STATE_NEED_BUFFER:
spdk_trace_record(TRACE_RDMA_REQUEST_STATE_NEED_BUFFER, 0, 0, (uintptr_t)rdma_req, (uintptr_t)rqpair->cm_id);
...
break;
case RDMA_REQUEST_STATE_TRANSFER_PENDING_HOST_TO_CONTROLLER:
spdk_trace_record(TRACE_RDMA_REQUEST_STATE_TRANSFER_PENDING_HOST_TO_CONTROLLER, 0, 0,
(uintptr_t)rdma_req, (uintptr_t)rqpair->cm_id);
...
All the tracing functions are documented in the Tracepoint library documentation