numam-spdk/doc/bdev_module.md

Writing a Custom Block Device Module

Target Audience

This programming guide is intended for developers authoring their own block device modules to integrate with SPDK's bdev layer. For a guide on how to use the bdev layer, see @ref bdev_pg.

Introduction

A block device module is SPDK's equivalent of a device driver in a traditional operating system. The module provides a set of function pointers that are called to service block device I/O requests. SPDK provides a number of block device modules including NVMe, RAM-disk, and Ceph RBD. However, some users will want to write their own to interact with either custom hardware or to an existing storage software stack. This guide is intended to demonstrate exactly how to write a module.

Creating A New Module

Block device modules are located in subdirectories under lib/bdev today. It is not currently possible to place the code for a bdev module elsewhere, but updates to the build system could be made to enable this in the future. To create a module, add a new directory with a single C file and a Makefile. A great starting point is to copy the existing 'null' bdev module.

The primary interface that bdev modules will interact with is in include/spdk_internal/bdev.h. In that header a macro is defined that registers a new bdev module - SPDK_BDEV_MODULE_REGISTER. This macro take as argument a pointer spdk_bdev_module structure that is used to register new bdev module.

The spdk_bdev_module structure describes the module properties like initialization (module_init) and teardown (module_fini) functions, the function that returns context size (get_ctx_size) - scratch space that will be allocated in each I/O request for use by this module, and a callback that will be called each time a new bdev is registered by another module (examine). Please check the documentation of struct spdk_bdev_module for more details.

Creating Bdevs

New bdevs are created within the module by calling spdk_bdev_register(). The module must allocate a struct spdk_bdev, fill it out appropriately, and pass it to the register call. The most important field to fill out is fn_table, which points at this data structure:

/*
 * Function table for a block device backend.
 *
 * The backend block device function table provides a set of APIs to allow
 * communication with a backend. The main commands are read/write API
 * calls for I/O via submit_request.
 */
struct spdk_bdev_fn_table {
	/* Destroy the backend block device object */
	int (*destruct)(void *ctx);

	/* Process the IO. */
	void (*submit_request)(struct spdk_io_channel *ch, struct spdk_bdev_io *);

	/* Check if the block device supports a specific I/O type. */
	bool (*io_type_supported)(void *ctx, enum spdk_bdev_io_type);

	/* Get an I/O channel for the specific bdev for the calling thread. */
	struct spdk_io_channel *(*get_io_channel)(void *ctx);

	/*
	 * Output driver-specific configuration to a JSON stream. Optional - may be NULL.
	 *
	 * The JSON write context will be initialized with an open object, so the bdev
	 * driver should write a name (based on the driver name) followed by a JSON value
	 * (most likely another nested object).
	 */
	int (*dump_config_json)(void *ctx, struct spdk_json_write_ctx *w);

	/* Get spin-time per I/O channel in microseconds.
	 *  Optional - may be NULL.
	 */
	uint64_t (*get_spin_time)(struct spdk_io_channel *ch);
};

The bdev module must implement these function callbacks.

The destruct function is called to tear down the device when the system no longer needs it. What destruct does is up to the module - it may just be freeing memory or it may be shutting down a piece of hardware.

The io_type_supported function returns whether a particular I/O type is supported. The available I/O types are:

/** bdev I/O type */
enum spdk_bdev_io_type {
	SPDK_BDEV_IO_TYPE_INVALID = 0,
	SPDK_BDEV_IO_TYPE_READ,
	SPDK_BDEV_IO_TYPE_WRITE,
	SPDK_BDEV_IO_TYPE_UNMAP,
	SPDK_BDEV_IO_TYPE_FLUSH,
	SPDK_BDEV_IO_TYPE_RESET,
	SPDK_BDEV_IO_TYPE_NVME_ADMIN,
	SPDK_BDEV_IO_TYPE_NVME_IO,
	SPDK_BDEV_IO_TYPE_NVME_IO_MD,
	SPDK_BDEV_IO_TYPE_WRITE_ZEROES,
};

For the simplest bdev modules, only SPDK_BDEV_IO_TYPE_READ and SPDK_BDEV_IO_TYPE_WRITE are necessary. SPDK_BDEV_IO_TYPE_UNMAP is often referred to as "trim" or "deallocate", and is a request to mark a set of blocks as no longer containing valid data. SPDK_BDEV_IO_TYPE_FLUSH is a request to make all previously completed writes durable. Many devices do not require flushes. SPDK_BDEV_IO_TYPE_WRITE_ZEROES is just like a regular write, but does not provide a data buffer (it would have just contained all 0's). If it isn't supported, the generic bdev code is capable of emulating it by sending regular write requests.

SPDK_BDEV_IO_TYPE_RESET is a request to abort all I/O and return the underlying device to its initial state. Do not complete the reset request until all I/O has been completed in some way.

SPDK_BDEV_IO_TYPE_NVME_ADMIN, SPDK_BDEV_IO_TYPE_NVME_IO, and SPDK_BDEV_IO_TYPE_NVME_IO_MD are all mechanisms for passing raw NVMe commands through the SPDK bdev layer. They're strictly optional, and it probably only makes sense to implement those if the backing storage device is capable of handling NVMe commands.

The get_io_channel function should return an I/O channel. For a detailed explanation of I/O channels, see @ref concurrency. The generic bdev layer will call get_io_channel one time per thread, cache the result, and pass that result to submit_request. It will use the corresponding channel for the thread it calls submit_request on.

The submit_request function is called to actually submit I/O requests to the block device. Once the I/O request is completed, the module must call spdk_bdev_io_complete(). The I/O does not have to finish within the calling context of submit_request.

Creating Virtual Bdevs

Block devices are considered virtual if they handle I/O requests by routing the I/O to other block devices. The canonical example would be a bdev module that implements RAID. Virtual bdevs are created in the same way as regular bdevs, but take one additional step. The module can look up the underlying bdevs it wishes to route I/O to using spdk_bdev_get_by_name(), where the string name is provided by the user in a configuration file or via an RPC. The module then may proceed is normal by opening the bdev to obtain a descriptor, and creating I/O channels for the bdev (probably in response to the get_io_channel callback). The final step is to have the module use its open descriptor to call spdk_bdev_module_claim_bdev(), indicating that it is consuming the underlying bdev. This prevents other users from opening descriptors with write permissions. This effectively 'promotes' the descriptor to write-exclusive and is an operation only available to bdev modules.