d/numam-spdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
bad9d062a1
numam-spdk/doc/nvme-cli.md
GangCao 10525c9366 doc: update the nvme-cli user guide 
Update the content to support Intel specific commands and
add a note on the usage about spdk.conf file.

Change-Id: Id9bcac3719c951d3f4e9f6fe922004b3c325fabb
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/394563
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
2018-01-17 17:28:31 -05:00

3.0 KiB
Raw Blame History

nvme-cli

nvme-cli with SPDK Getting Started Guide

Now nvme-cli can support both kernel driver and SPDK user mode driver for most of its available commands and Intel specific commands.

  1. Clone the nvme-cli repository from the SPDK GitHub fork. Make sure you check out the spdk branch.
git clone -b spdk https://github.com/spdk/nvme-cli.git

  1. Clone the SPDK repository from https://github.com/spdk/spdk under the nvme-cli folder.

  2. Refer to the "README.md" under SPDK folder to properly build SPDK.

  3. Refer to the "README.md" under nvme-cli folder to properly build nvme-cli.

  4. Execute "<spdk_folder>/scripts/setup.sh" with the "root" account.

  5. Update the "spdk.conf" file under nvme-cli folder to properly configure the SPDK. Notes as following:

spdk=0
Default to 0 (off) and change to 1 (on) after switching to SPDK via "<spdk_folder>/scripts/setup.sh".

core_mask=0x100
Default to use the 9th core for the nvme-cli running.

mem_size=512
Default to use 512MB memory allocated.

shm_id=1
Default to 1. If other running SPDK application has configured with this same 1 shm_id.
This nvme-cli will access those devices from that running SPDK application.

  1. Run the "./nvme list" command to get the domain🚌device.function for each found NVMe SSD.

  2. Run the other nvme commands with domain🚌device.function instead of "/dev/nvmeX" for the specified device.

Example: ./nvme smart-log 0000:01:00.0
  1. Run the "./nvme intel" commands for Intel specific commands against Intel NVMe SSD.
Example: ./nvme intel internal-log 0000:08:00.0
  1. Execute "<spdk_folder>/scripts/setup.sh reset" with the "root" account and update "spdk=0" in spdk.conf to use the kernel driver if wanted.

Use scenarios

Run as the only SPDK application on the system

  1. Modify the spdk to 1 in spdk.conf. If the system has fewer cores or less memory, update the spdk.conf accordingly.

Run together with other running SPDK applications on shared NVMe SSDs

  1. For the other running SPDK application, start with the parameter like "-i 1" to have the same "shm_id".

  2. Use the default spdk.conf setting where "shm_id=1" to start the nvme-cli.

  3. If other SPDK applications run with different shm_id parameter, update the "spdk.conf" accordingly.

Run with other running SPDK applications on non-shared NVMe SSDs

  1. Properly configure the other running SPDK applications.
a. Only access the NVMe SSDs it wants.
b. Allocate a fixed number of memory instead of all available memory.
  1. Properly configure the spdk.conf setting for nvme-cli.
a. Not access the NVMe SSDs from other SPDK applications.
b. Change the mem_size to a proper size.

Note

  1. To run the newly built nvme-cli, either explicitly run as "./nvme" or added it into the $PATH to avoid invoke other already installed version.

  2. To run the newly built nvme-cli with SPDK support in arbitrary directory, copy "spdk.conf" to that directory from the nvme cli folder and update the configuration as suggested.