d/numam-spdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
c9d3d5a159
numam-spdk/doc/nvme-cli.md
Karol Latecki 3d8a0b19b0 doc: Fix Markdown MD032 linter warnings 
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.

Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
2020-02-06 09:46:06 +00:00

3.2 KiB
Raw Blame History

nvme-cli

nvme-cli with SPDK Getting Started Guide

Now nvme-cli can support both kernel driver and SPDK user mode driver for most of its available commands and Intel specific commands.

  1. Clone the nvme-cli repository from the SPDK GitHub fork. Make sure you check out the spdk-1.6 branch.
git clone -b spdk-1.6 https://github.com/spdk/nvme-cli.git

  1. Clone the SPDK repository from https://github.com/spdk/spdk under the nvme-cli folder.

  2. Refer to the "README.md" under SPDK folder to properly build SPDK.

  3. Refer to the "README.md" under nvme-cli folder to properly build nvme-cli.

  4. Execute "<spdk_folder>/scripts/setup.sh" with the "root" account.

  5. Update the "spdk.conf" file under nvme-cli folder to properly configure the SPDK. Notes as following:

spdk=1
Indicates whether or not to use spdk. Can be 0 (off) or 1 (on).
Defaults to 1 which assumes that you have run "<spdk_folder>/scripts/setup.sh", unbinding your drives from the kernel.

core_mask=0x1
A bitmask representing which core(s) to use for nvme-cli operations.
Defaults to core 0.

mem_size=512
The amount of reserved hugepage memory to use for nvme-cli (in MB).
Defaults to 512MB.

shm_id=0
Indicates the shared memory ID for the spdk application with which your NVMe drives are associated,
and should be adjusted accordingly.
Defaults to 0.

  1. Run the "./nvme list" command to get the domain🚌device.function for each found NVMe SSD.

  2. Run the other nvme commands with domain🚌device.function instead of "/dev/nvmeX" for the specified device.

Example: ./nvme smart-log 0000:01:00.0
  1. Run the "./nvme intel" commands for Intel specific commands against Intel NVMe SSD.
Example: ./nvme intel internal-log 0000:08:00.0
  1. Execute "<spdk_folder>/scripts/setup.sh reset" with the "root" account and update "spdk=0" in spdk.conf to use the kernel driver if wanted.

Use scenarios

Run as the only SPDK application on the system

  1. Modify the spdk to 1 in spdk.conf. If the system has fewer cores or less memory, update the spdk.conf accordingly.

Run together with other running SPDK applications on shared NVMe SSDs

  1. For the other running SPDK application, start with the parameter like "-i 1" to have the same "shm_id".

  2. Use the default spdk.conf setting where "shm_id=1" to start the nvme-cli.

  3. If other SPDK applications run with different shm_id parameter, update the "spdk.conf" accordingly.

Run with other running SPDK applications on non-shared NVMe SSDs

  1. Properly configure the other running SPDK applications.
a. Only access the NVMe SSDs it wants.
b. Allocate a fixed number of memory instead of all available memory.
  1. Properly configure the spdk.conf setting for nvme-cli.
a. Not access the NVMe SSDs from other SPDK applications.
b. Change the mem_size to a proper size.

Note

  1. To run the newly built nvme-cli, either explicitly run as "./nvme" or added it into the $PATH to avoid invoke other already installed version.

  2. To run the newly built nvme-cli with SPDK support in arbitrary directory, copy "spdk.conf" to that directory from the nvme cli folder and update the configuration as suggested.