d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2a6c850c09
freebsd-dev/sys/dev/pci/pci.c

1913 lines
52 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000, BSDi
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include "opt_bus.h"
Added a bit of missing functionality to make this work correctly on a wider variety of systems. Include the deivers from pci_intel.c in pci_config.c (I hope this is what was intended; my system works ok). Use pmap_mapdev(). Automatically map any large linear frame buffers or whatnot in VGA-style devices which ordinarily would not have their own drivers, and don't call not_supported() for them. (This shuts up complaints about my Matrox card.) Include the beginnings of what could eventually become dynamically-loadable PCI devices. Allow for the possibility of PCI devices simply providing a PCI veneer over an existing ISA device, and shut up about them, too. Make autoconfiguration text conform more to the style of other supported buses.
1994-09-14 01:34:51 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
#include <sys/malloc.h>
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
#include <sys/module.h>
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
#include <sys/linker.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <sys/fcntl.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#include <sys/conf.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <sys/kernel.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <sys/queue.h>
Make PCI_ENABLE_IO_MODES a sysctl hw.pci.enable_io_modes. It can also be set at boot time. It defaults to 1 now since it can be set in the boot loader. If this proves unwise, we can reset it to defaulting to 0.
2002-07-26 07:58:16 +00:00
#include <sys/sysctl.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <sys/types.h>
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
#include <vm/vm.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/pmap.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <vm/vm_extern.h>
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
#include <sys/pciio.h>
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#include "pcib_if.h"
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
#include "pci_if.h"
Minor whitespace changes to conform better to stlye(9) and reduce diffs with uncommitted changes I have in p4.
2003-12-24 02:01:22 +00:00
static uint32_t pci_mapbase(unsigned mapreg);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static int pci_maptype(unsigned mapreg);
static int pci_mapsize(unsigned testval);
static int pci_maprange(unsigned mapreg);
static void pci_fixancient(pcicfgregs *cfg);
static int pci_porten(device_t pcib, int b, int s, int f);
static int pci_memen(device_t pcib, int b, int s, int f);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
static int pci_add_map(device_t pcib, device_t bus, device_t dev,
int b, int s, int f, int reg,
Minor whitespace changes to conform better to stlye(9) and reduce diffs with uncommitted changes I have in p4.
2003-12-24 02:01:22 +00:00
struct resource_list *rl);
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
static void pci_add_resources(device_t pcib, device_t bus,
Minor whitespace changes to conform better to stlye(9) and reduce diffs with uncommitted changes I have in p4.
2003-12-24 02:01:22 +00:00
device_t dev);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static int pci_probe(device_t dev);
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
static int pci_attach(device_t dev);
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
2002-09-04 03:13:16 +00:00
static void pci_load_vendor_data(void);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static int pci_describe_parse_line(char **ptr, int *vendor,
Minor whitespace changes to conform better to stlye(9) and reduce diffs with uncommitted changes I have in p4.
2003-12-24 02:01:22 +00:00
int *device, char **desc);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static char *pci_describe_device(device_t dev);
static int pci_modevent(module_t mod, int what, void *arg);
These don't need to be semi-public after all.
2003-02-17 19:47:02 +00:00
static void pci_hdrtypedata(device_t pcib, int b, int s, int f,
Minor whitespace changes to conform better to stlye(9) and reduce diffs with uncommitted changes I have in p4.
2003-12-24 02:01:22 +00:00
pcicfgregs *cfg);
These don't need to be semi-public after all.
2003-02-17 19:47:02 +00:00
static void pci_read_extcap(device_t pcib, pcicfgregs *cfg);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
static void pci_cfg_restore(device_t, struct pci_devinfo *);
static void pci_cfg_save(device_t, struct pci_devinfo *, int);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static device_method_t pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pci_probe),
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
DEVMETHOD(device_attach, pci_attach),
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
DEVMETHOD(device_shutdown, bus_generic_shutdown),
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
DEVMETHOD(device_suspend, pci_suspend),
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
DEVMETHOD(device_resume, pci_resume),
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/* Bus interface */
DEVMETHOD(bus_print_child, pci_print_child),
DEVMETHOD(bus_probe_nomatch, pci_probe_nomatch),
DEVMETHOD(bus_read_ivar, pci_read_ivar),
DEVMETHOD(bus_write_ivar, pci_write_ivar),
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
DEVMETHOD(bus_driver_added, pci_driver_added),
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_get_resource_list,pci_get_resource_list),
DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_delete_resource, pci_delete_resource),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
Move the pnp and location info into the common pci bus. Make all known pci busses implement this. Also minor comment smithing in cardbus. Fix copyright to this year with my name on it since I've been doing a lot to this file. Reviewed by: jhb
2003-02-17 21:20:35 +00:00
DEVMETHOD(bus_child_pnpinfo_str, pci_child_pnpinfo_str_method),
DEVMETHOD(bus_child_location_str, pci_child_location_str_method),
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/* PCI interface */
DEVMETHOD(pci_read_config, pci_read_config_method),
DEVMETHOD(pci_write_config, pci_write_config_method),
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
DEVMETHOD(pci_enable_busmaster, pci_enable_busmaster_method),
DEVMETHOD(pci_disable_busmaster, pci_disable_busmaster_method),
DEVMETHOD(pci_enable_io, pci_enable_io_method),
DEVMETHOD(pci_disable_io, pci_disable_io_method),
DEVMETHOD(pci_get_powerstate, pci_get_powerstate_method),
DEVMETHOD(pci_set_powerstate, pci_set_powerstate_method),
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
DEVMETHOD(pci_assign_interrupt, pci_assign_interrupt_method),
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{ 0, 0 }
};
Make the cardbus driver a derived class of the pci driver. In theory, this should allow many of the pci methods to be re-staticised.
2003-11-01 12:45:03 +00:00
DEFINE_CLASS_0(pci, pci_driver, pci_methods, 0);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
devclass_t pci_devclass;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
DRIVER_MODULE(pci, pcib, pci_driver, pci_devclass, pci_modevent, 0);
Add MODULE_VERSION.
2002-04-17 00:31:32 +00:00
MODULE_VERSION(pci, 1);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
static char *pci_vendordata;
static size_t pci_vendordata_size;
Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function.
1997-06-25 20:56:29 +00:00
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
struct pci_quirk {
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t devid; /* Vendor/device of the card */
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
int type;
Fix typo: wierd -> weird. There is no such thing as wierd in the english language.
2001-02-06 09:25:10 +00:00
#define PCI_QUIRK_MAP_REG 1 /* PCI map register in weird place */
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
int arg1;
int arg2;
};
struct pci_quirk pci_quirks[] = {
Add support for the Intel 82443MX chipset PR: kern/33032 MFC after: 1 month
2001-12-21 01:28:59 +00:00
/* The Intel 82371AB and 82443MX has a map register at offset 0x90. */
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
{ 0x71138086, PCI_QUIRK_MAP_REG, 0x90, 0 },
Add support for the Intel 82443MX chipset PR: kern/33032 MFC after: 1 month
2001-12-21 01:28:59 +00:00
{ 0x719b8086, PCI_QUIRK_MAP_REG, 0x90, 0 },
The serverworks OSB4 pci->isa bridge has the same mapping register at offset 0x90 for the SMBus device as the PIIX4.
2001-03-15 06:51:45 +00:00
/* As does the Serverworks OSB4 (the SMBus mapping register) */
{ 0x02001166, PCI_QUIRK_MAP_REG, 0x90, 0 },
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
{ 0 }
};
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
/* map register information */
#define PCI_MAPMEM 0x01 /* memory map */
#define PCI_MAPMEMP 0x02 /* prefetchable memory map */
#define PCI_MAPPORT 0x04 /* port map */
Don't put variable declarations in header files, put prototypes. 'pci_devq' provides useful information now.
2001-12-19 08:49:11 +00:00
struct devlist pci_devq;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t pci_generation;
uint32_t pci_numdevs = 0;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Make PCI_ENABLE_IO_MODES a sysctl hw.pci.enable_io_modes. It can also be set at boot time. It defaults to 1 now since it can be set in the boot loader. If this proves unwise, we can reset it to defaulting to 0.
2002-07-26 07:58:16 +00:00
/* sysctl vars */
SYSCTL_NODE(_hw, OID_AUTO, pci, CTLFLAG_RD, 0, "PCI bus tuning parameters");
ooops. I disabled pci_enable_io_modes not pci_do_powerstate in the last commit. That was in error. Noticed by: sos
2004-04-16 15:01:54 +00:00
static int pci_enable_io_modes = 1;
Make PCI_ENABLE_IO_MODES a sysctl hw.pci.enable_io_modes. It can also be set at boot time. It defaults to 1 now since it can be set in the boot loader. If this proves unwise, we can reset it to defaulting to 0.
2002-07-26 07:58:16 +00:00
TUNABLE_INT("hw.pci.enable_io_modes", (int *)&pci_enable_io_modes);
SYSCTL_INT(_hw_pci, OID_AUTO, enable_io_modes, CTLFLAG_RW,
ooops. I disabled pci_enable_io_modes not pci_do_powerstate in the last commit. That was in error. Noticed by: sos
2004-04-16 15:01:54 +00:00
&pci_enable_io_modes, 1,
Make PCI_ENABLE_IO_MODES a sysctl hw.pci.enable_io_modes. It can also be set at boot time. It defaults to 1 now since it can be set in the boot loader. If this proves unwise, we can reset it to defaulting to 0.
2002-07-26 07:58:16 +00:00
"Enable I/O and memory bits in the config register. Some BIOSes do not\n\
enable these bits correctly. We'd like to do this all the time, but there\n\
are some peripherals that this causes problems with.");
ooops. I disabled pci_enable_io_modes not pci_do_powerstate in the last commit. That was in error. Noticed by: sos
2004-04-16 15:01:54 +00:00
static int pci_do_powerstate = 0;
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
TUNABLE_INT("hw.pci.do_powerstate", (int *)&pci_do_powerstate);
SYSCTL_INT(_hw_pci, OID_AUTO, do_powerstate, CTLFLAG_RW,
ooops. I disabled pci_enable_io_modes not pci_do_powerstate in the last commit. That was in error. Noticed by: sos
2004-04-16 15:01:54 +00:00
&pci_do_powerstate, 0,
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
"Enable setting the power states of the PCI devices. This means that we\n\
set devices into D0 before probe/attach, and D3 if they fail to attach. It\n\
also means we set devices into D3 state before shutdown.");
Implement 2 small helper functions: pci_find_bsf() - Find a device_t by bus/slot/function. pci_find_device() - Find a device_t by vendor/device ID.
2002-01-10 00:56:02 +00:00
/* Find a device_t by bus/slot/function */
device_t
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
pci_find_bsf(uint8_t bus, uint8_t slot, uint8_t func)
Implement 2 small helper functions: pci_find_bsf() - Find a device_t by bus/slot/function. pci_find_device() - Find a device_t by vendor/device ID.
2002-01-10 00:56:02 +00:00
{
struct pci_devinfo *dinfo;
STAILQ_FOREACH(dinfo, &pci_devq, pci_links) {
if ((dinfo->cfg.bus == bus) &&
(dinfo->cfg.slot == slot) &&
(dinfo->cfg.func == func)) {
return (dinfo->cfg.dev);
}
}
return (NULL);
}
/* Find a device_t by vendor/device ID */
device_t
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
pci_find_device(uint16_t vendor, uint16_t device)
Implement 2 small helper functions: pci_find_bsf() - Find a device_t by bus/slot/function. pci_find_device() - Find a device_t by vendor/device ID.
2002-01-10 00:56:02 +00:00
{
struct pci_devinfo *dinfo;
STAILQ_FOREACH(dinfo, &pci_devq, pci_links) {
if ((dinfo->cfg.vendor == vendor) &&
(dinfo->cfg.device == device)) {
return (dinfo->cfg.dev);
}
}
return (NULL);
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return base address of memory or port map */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
static uint32_t
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_mapbase(unsigned mapreg)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int mask = 0x03;
if ((mapreg & 0x01) == 0)
mask = 0x0f;
return (mapreg & ~mask);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return map type of memory or port map */
Update PCI bus code from my current sources: - always use pci_conf_read() and pci_conf_write(). (This is required to simulate non-existant devices in my system for PCI bridge code tests.) - reorder some functions (put the main functions at the end). - correct off by one bug in the code dealing with unitialized PCI to PCI bridge chips. (Bug found by ASAMI Satoshi.) - print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_maptype(unsigned mapreg)
{
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
static uint8_t maptype[0x10] = {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
PCI_MAPMEM, PCI_MAPPORT,
PCI_MAPMEM, 0,
PCI_MAPMEM, PCI_MAPPORT,
0, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
PCI_MAPMEM|PCI_MAPMEMP, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
0, 0,
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
};
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return maptype[mapreg & 0x0f];
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return log2 of map size decoded for memory or port map */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_mapsize(unsigned testval)
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int ln2size;
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
testval = pci_mapbase(testval);
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
ln2size = 0;
if (testval != 0) {
while ((testval & 1) == 0)
{
ln2size++;
testval >>= 1;
}
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (ln2size);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return log2 of address range supported by map register */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
pci_maprange(unsigned mapreg)
{
int ln2range = 0;
switch (mapreg & 0x07) {
case 0x00:
case 0x01:
case 0x05:
ln2range = 32;
break;
case 0x02:
ln2range = 20;
break;
case 0x04:
ln2range = 64;
break;
Update PCI bus code from my current sources: - always use pci_conf_read() and pci_conf_write(). (This is required to simulate non-existant devices in my system for PCI bridge code tests.) - reorder some functions (put the main functions at the end). - correct off by one bug in the code dealing with unitialized PCI to PCI bridge chips. (Bug found by ASAMI Satoshi.) - print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (ln2range);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* adjust some values from PCI 1.0 devices to match 2.0 standards ... */
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void
pci_fixancient(pcicfgregs *cfg)
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (cfg->hdrtype != 0)
return;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* PCI to PCI bridges use header type 1 */
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
if (cfg->baseclass == PCIC_BRIDGE && cfg->subclass == PCIS_BRIDGE_PCI)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->hdrtype = 1;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* extract header type specific config data */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
These don't need to be semi-public after all.
2003-02-17 19:47:02 +00:00
static void
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
pci_hdrtypedata(device_t pcib, int b, int s, int f, pcicfgregs *cfg)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#define REG(n, w) PCIB_READ_CONFIG(pcib, b, s, f, n, w)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
switch (cfg->hdrtype) {
case 0:
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
cfg->subvendor = REG(PCIR_SUBVEND_0, 2);
cfg->subdevice = REG(PCIR_SUBDEV_0, 2);
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
cfg->nummaps = PCI_MAXMAPS_0;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
break;
case 1:
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
cfg->subvendor = REG(PCIR_SUBVEND_1, 2);
cfg->subdevice = REG(PCIR_SUBDEV_1, 2);
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
cfg->nummaps = PCI_MAXMAPS_1;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
break;
case 2:
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
cfg->subvendor = REG(PCIR_SUBVEND_2, 2);
cfg->subdevice = REG(PCIR_SUBDEV_2, 2);
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
cfg->nummaps = PCI_MAXMAPS_2;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
break;
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#undef REG
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/* read configuration header into pcicfgregs structure */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
struct pci_devinfo *
Add 5th parameter to pci_read_device specifying the size of the object to create.
2002-03-13 16:32:11 +00:00
pci_read_device(device_t pcib, int b, int s, int f, size_t size)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#define REG(n, w) PCIB_READ_CONFIG(pcib, b, s, f, n, w)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcicfgregs *cfg = NULL;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct pci_devinfo *devlist_entry;
struct devlist *devlist_head;
devlist_head = &pci_devq;
devlist_entry = NULL;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
use a REG macro that was already defined. Reorder how the pci probing in handled. before adding devices, check to see if the slot is a multi-function device to see if we should probe all the functions. Original idea by: imp
2003-06-22 02:26:17 +00:00
if (REG(PCIR_DEVVENDOR, 4) != -1) {
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
devlist_entry = malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
if (devlist_entry == NULL)
return (NULL);
cfg = &devlist_entry->cfg;
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
cfg->bus = b;
cfg->slot = s;
cfg->func = f;
cfg->vendor = REG(PCIR_VENDOR, 2);
cfg->device = REG(PCIR_DEVICE, 2);
cfg->cmdreg = REG(PCIR_COMMAND, 2);
cfg->statreg = REG(PCIR_STATUS, 2);
cfg->baseclass = REG(PCIR_CLASS, 1);
cfg->subclass = REG(PCIR_SUBCLASS, 1);
cfg->progif = REG(PCIR_PROGIF, 1);
cfg->revid = REG(PCIR_REVID, 1);
- Rename PCIx_HEADERTYPE* to PCIx_HDRTYPE* so the constants aren't so long. - Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds the header type. - Replace several magic numbers with appropriate constants for the header type register and a couple of PCI_FUNCMAX. - Merge to amd64 the fix to the i386 bridge code to skip devices with unknown header types. Requested by: imp (1, 2)
2003-08-28 21:22:25 +00:00
cfg->hdrtype = REG(PCIR_HDRTYPE, 1);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
cfg->cachelnsz = REG(PCIR_CACHELNSZ, 1);
cfg->lattimer = REG(PCIR_LATTIMER, 1);
cfg->intpin = REG(PCIR_INTPIN, 1);
cfg->intline = REG(PCIR_INTLINE, 1);
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
cfg->mingnt = REG(PCIR_MINGNT, 1);
cfg->maxlat = REG(PCIR_MAXLAT, 1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->mfdev = (cfg->hdrtype & PCIM_MFDEV) != 0;
cfg->hdrtype &= ~PCIM_MFDEV;
pci_fixancient(cfg);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
pci_hdrtypedata(pcib, b, s, f, cfg);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
if (REG(PCIR_STATUS, 2) & PCIM_STATUS_CAPPRESENT)
pci_read_extcap(pcib, cfg);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
STAILQ_INSERT_TAIL(devlist_head, devlist_entry, pci_links);
devlist_entry->conf.pc_sel.pc_bus = cfg->bus;
devlist_entry->conf.pc_sel.pc_dev = cfg->slot;
devlist_entry->conf.pc_sel.pc_func = cfg->func;
devlist_entry->conf.pc_hdr = cfg->hdrtype;
devlist_entry->conf.pc_subvendor = cfg->subvendor;
devlist_entry->conf.pc_subdevice = cfg->subdevice;
devlist_entry->conf.pc_vendor = cfg->vendor;
devlist_entry->conf.pc_device = cfg->device;
devlist_entry->conf.pc_class = cfg->baseclass;
devlist_entry->conf.pc_subclass = cfg->subclass;
devlist_entry->conf.pc_progif = cfg->progif;
devlist_entry->conf.pc_revid = cfg->revid;
pci_numdevs++;
pci_generation++;
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
return (devlist_entry);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
#undef REG
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
These don't need to be semi-public after all.
2003-02-17 19:47:02 +00:00
static void
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
pci_read_extcap(device_t pcib, pcicfgregs *cfg)
{
#define REG(n, w) PCIB_READ_CONFIG(pcib, cfg->bus, cfg->slot, cfg->func, n, w)
int ptr, nextptr, ptrptr;
Remove most of the magic constants from the extcap parsing code.
2003-09-14 06:23:19 +00:00
switch (cfg->hdrtype & PCIM_HDRTYPE) {
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
case 0:
Remove most of the magic constants from the extcap parsing code.
2003-09-14 06:23:19 +00:00
ptrptr = PCIR_CAP_PTR;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
break;
case 2:
ptrptr = 0x14;
break;
default:
return; /* no extended capabilities support */
}
nextptr = REG(ptrptr, 1); /* sanity check? */
/*
* Read capability entries.
*/
while (nextptr != 0) {
Sanity check ptr for legal values so it is less likely (but not impossible) to get stuck in an infinite loop. Obtained from: msmith@freebsd.org
2001-01-01 16:49:31 +00:00
/* Sanity check */
if (nextptr > 255) {
printf("illegal PCI extended capability offset %d\n",
nextptr);
return;
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/* Find the next entry */
ptr = nextptr;
nextptr = REG(ptr + 1, 1);
/* Process this entry */
switch (REG(ptr, 1)) {
Remove most of the magic constants from the extcap parsing code.
2003-09-14 06:23:19 +00:00
case PCIY_PMG: /* PCI power management */
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->pp.pp_cap == 0) {
cfg->pp.pp_cap = REG(ptr + PCIR_POWER_CAP, 2);
cfg->pp.pp_status = ptr + PCIR_POWER_STATUS;
cfg->pp.pp_pmcsr = ptr + PCIR_POWER_PMCSR;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
if ((nextptr - ptr) > PCIR_POWER_DATA)
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
cfg->pp.pp_data = ptr + PCIR_POWER_DATA;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
break;
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
case PCIY_MSI: /* PCI MSI */
cfg->msi.msi_ctrl = REG(ptr + PCIR_MSI_CTRL, 2);
if (cfg->msi.msi_ctrl & PCIM_MSICTRL_64BIT)
cfg->msi.msi_data = PCIR_MSI_DATA_64BIT;
else
cfg->msi.msi_data = PCIR_MSI_DATA;
cfg->msi.msi_msgnum = 1 << ((cfg->msi.msi_ctrl &
PCIM_MSICTRL_MMC_MASK)>>1);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
default:
break;
}
}
#undef REG
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* free pcicfgregs structure and all depending data structures */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
int
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pci_freecfg(struct pci_devinfo *dinfo)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct devlist *devlist_head;
devlist_head = &pci_devq;
Back out the previous change to the queue(3) interface. It was not discussed and should probably not happen. Requested by: msmith and others
2000-05-26 02:09:24 +00:00
STAILQ_REMOVE(devlist_head, dinfo, pci_devinfo, pci_links);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
free(dinfo, M_DEVBUF);
/* increment the generation count */
pci_generation++;
/* we're losing one device */
pci_numdevs--;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (0);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
/*
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
* PCI power manangement
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
*/
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_set_powerstate_method(device_t dev, device_t child, int state)
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
{
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
struct pci_devinfo *dinfo = device_get_ivars(child);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
pcicfgregs *cfg = &dinfo->cfg;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t status;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
int result;
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
/*
* Dx -> Dx is a nop always.
*/
Fix two typos from PR: 65694 1) In pci.c, we need to check the child device's state, not the parent device's state. 2) In acpi_pci.c, we have to run the power state change after the acpi method when the old_state is > new state, not the other way around. Submitted by: Dmitry Remesov PR: 65694
2004-04-26 02:11:38 +00:00
if (pci_get_powerstate(child) == state)
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
return (0);
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->pp.pp_cap != 0) {
status = PCI_READ_CONFIG(dev, child, cfg->pp.pp_status, 2)
& ~PCIM_PSTAT_DMASK;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
result = 0;
switch (state) {
case PCI_POWERSTATE_D0:
status |= PCIM_PSTAT_D0;
break;
case PCI_POWERSTATE_D1:
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->pp.pp_cap & PCIM_PCAP_D1SUPP) {
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
status |= PCIM_PSTAT_D1;
} else {
result = EOPNOTSUPP;
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
break;
case PCI_POWERSTATE_D2:
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->pp.pp_cap & PCIM_PCAP_D2SUPP) {
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
status |= PCIM_PSTAT_D2;
} else {
result = EOPNOTSUPP;
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
break;
case PCI_POWERSTATE_D3:
status |= PCIM_PSTAT_D3;
break;
default:
result = EINVAL;
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
if (result == 0)
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
PCI_WRITE_CONFIG(dev, child, cfg->pp.pp_status, status,
2);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
} else {
result = ENXIO;
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
return(result);
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_get_powerstate_method(device_t dev, device_t child)
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
{
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
struct pci_devinfo *dinfo = device_get_ivars(child);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
pcicfgregs *cfg = &dinfo->cfg;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t status;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
int result;
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->pp.pp_cap != 0) {
status = PCI_READ_CONFIG(dev, child, cfg->pp.pp_status, 2);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
switch (status & PCIM_PSTAT_DMASK) {
case PCIM_PSTAT_D0:
result = PCI_POWERSTATE_D0;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
break;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
case PCIM_PSTAT_D1:
result = PCI_POWERSTATE_D1;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
break;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
case PCIM_PSTAT_D2:
result = PCI_POWERSTATE_D2;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
break;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
case PCIM_PSTAT_D3:
result = PCI_POWERSTATE_D3;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
break;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
default:
result = PCI_POWERSTATE_UNKNOWN;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
break;
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
} else {
/* No support, device is always at D0 */
result = PCI_POWERSTATE_D0;
}
return(result);
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* Some convenience functions for PCI device drivers.
*/
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static __inline void
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
pci_set_command_bit(device_t dev, device_t child, uint16_t bit)
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t command;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
command = PCI_READ_CONFIG(dev, child, PCIR_COMMAND, 2);
command |= bit;
PCI_WRITE_CONFIG(dev, child, PCIR_COMMAND, command, 2);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
static __inline void
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
pci_clear_command_bit(device_t dev, device_t child, uint16_t bit)
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t command;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
command = PCI_READ_CONFIG(dev, child, PCIR_COMMAND, 2);
command &= ~bit;
PCI_WRITE_CONFIG(dev, child, PCIR_COMMAND, command, 2);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_enable_busmaster_method(device_t dev, device_t child)
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
pci_set_command_bit(dev, child, PCIM_CMD_BUSMASTEREN);
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
return (0);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_disable_busmaster_method(device_t dev, device_t child)
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
pci_clear_command_bit(dev, child, PCIM_CMD_BUSMASTEREN);
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
return (0);
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
}
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_enable_io_method(device_t dev, device_t child, int space)
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t command;
uint16_t bit;
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
char *error;
bit = 0;
error = NULL;
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
switch(space) {
case SYS_RES_IOPORT:
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
bit = PCIM_CMD_PORTEN;
error = "port";
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
break;
case SYS_RES_MEMORY:
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
bit = PCIM_CMD_MEMEN;
error = "memory";
break;
default:
return (EINVAL);
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
}
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
pci_set_command_bit(dev, child, bit);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/* Some devices seem to need a brief stall here, what do to? */
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
command = PCI_READ_CONFIG(dev, child, PCIR_COMMAND, 2);
if (command & bit)
return (0);
device_printf(child, "failed to enable %s mapping!\n", error);
return (ENXIO);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_disable_io_method(device_t dev, device_t child, int space)
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
{
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t command;
uint16_t bit;
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
char *error;
bit = 0;
error = NULL;
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
switch(space) {
case SYS_RES_IOPORT:
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
bit = PCIM_CMD_PORTEN;
error = "port";
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
break;
case SYS_RES_MEMORY:
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
bit = PCIM_CMD_MEMEN;
error = "memory";
break;
default:
return (EINVAL);
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
}
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
pci_clear_command_bit(dev, child, bit);
command = PCI_READ_CONFIG(dev, child, PCIR_COMMAND, 2);
if (command & bit) {
device_printf(child, "failed to disable %s mapping!\n", error);
return (ENXIO);
}
return (0);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
/*
* New style pci driver. Parent device is either a pci-host-bridge or a
* pci-pci-bridge. Both kinds are represented by instances of pcib.
*/
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
void
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_print_verbose(struct pci_devinfo *dinfo)
{
if (bootverbose) {
pcicfgregs *cfg = &dinfo->cfg;
printf("found->\tvendor=0x%04x, dev=0x%04x, revid=0x%02x\n",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
cfg->vendor, cfg->device, cfg->revid);
When dumping the 'found devices' list in verbose mode, actually show the bus/slot/function numbers. The old PCI code used other markers or something, but without it here under the new pci code it is very hard to tell which device is which (this only affects bootverbose mode).
2000-09-05 00:32:19 +00:00
printf("\tbus=%d, slot=%d, func=%d\n",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
cfg->bus, cfg->slot, cfg->func);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
printf("\tclass=%02x-%02x-%02x, hdrtype=0x%02x, mfdev=%d\n",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
cfg->baseclass, cfg->subclass, cfg->progif, cfg->hdrtype,
cfg->mfdev);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
printf("\tcmdreg=0x%04x, statreg=0x%04x, cachelnsz=%d (dwords)\n",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
cfg->cmdreg, cfg->statreg, cfg->cachelnsz);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
printf("\tlattimer=0x%02x (%d ns), mingnt=0x%02x (%d ns), maxlat=0x%02x (%d ns)\n",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
cfg->lattimer, cfg->lattimer * 30, cfg->mingnt,
cfg->mingnt * 250, cfg->maxlat, cfg->maxlat * 250);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
if (cfg->intpin > 0)
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
printf("\tintpin=%c, irq=%d\n",
cfg->intpin +'a' -1, cfg->intline);
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->pp.pp_cap) {
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t status;
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
status = pci_read_config(cfg->dev, cfg->pp.pp_status, 2);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
printf("\tpowerspec %d supports D0%s%s D3 current D%d\n",
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
cfg->pp.pp_cap & PCIM_PCAP_SPEC,
cfg->pp.pp_cap & PCIM_PCAP_D1SUPP ? " D1" : "",
cfg->pp.pp_cap & PCIM_PCAP_D2SUPP ? " D2" : "",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
status & PCIM_PSTAT_DMASK);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
}
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
if (cfg->msi.msi_data) {
int ctrl;
ctrl = cfg->msi.msi_ctrl;
printf("\tMSI supports %d message%s%s%s\n",
cfg->msi.msi_msgnum,
(cfg->msi.msi_msgnum == 1) ? "" : "s",
(ctrl & PCIM_MSICTRL_64BIT) ? ", 64 bit" : "",
(ctrl & PCIM_MSICTRL_VECTOR) ? ", vector masks":"");
}
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
}
}
static int
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
pci_porten(device_t pcib, int b, int s, int f)
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
{
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
return (PCIB_READ_CONFIG(pcib, b, s, f, PCIR_COMMAND, 2)
& PCIM_CMD_PORTEN) != 0;
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
}
static int
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
pci_memen(device_t pcib, int b, int s, int f)
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
{
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
return (PCIB_READ_CONFIG(pcib, b, s, f, PCIR_COMMAND, 2)
& PCIM_CMD_MEMEN) != 0;
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
}
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
/*
* Add a resource based on a pci map register. Return 1 if the map
* register is a 32bit map register or 2 if it is a 64bit register.
*/
static int
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_add_map(device_t pcib, device_t bus, device_t dev,
int b, int s, int f, int reg, struct resource_list *rl)
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
{
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t map;
uint64_t base;
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
uint64_t start, end, count;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t ln2size;
uint8_t ln2range;
uint32_t testval;
uint16_t cmd;
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
int type;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
map = PCIB_READ_CONFIG(pcib, b, s, f, reg, 4);
PCIB_WRITE_CONFIG(pcib, b, s, f, reg, 0xffffffff, 4);
testval = PCIB_READ_CONFIG(pcib, b, s, f, reg, 4);
PCIB_WRITE_CONFIG(pcib, b, s, f, reg, map, 4);
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
if (pci_maptype(map) & PCI_MAPMEM)
type = SYS_RES_MEMORY;
else
type = SYS_RES_IOPORT;
ln2size = pci_mapsize(testval);
ln2range = pci_maprange(testval);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
base = pci_mapbase(map);
/*
* For I/O registers, if bottom bit is set, and the next bit up
* isn't clear, we know we have a BAR that doesn't conform to the
* spec, so ignore it. Also, sanity check the size of the data
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
* areas to the type of memory involved. Memory must be at least
* 32 bytes in size, while I/O ranges must be at least 4.
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
*/
if ((testval & 0x1) == 0x1 &&
(testval & 0x2) != 0)
return (1);
if ((type == SYS_RES_MEMORY && ln2size < 5) ||
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
(type == SYS_RES_IOPORT && ln2size < 2))
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
return (1);
if (ln2range == 64)
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
/* Read the other half of a 64bit map register */
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
base |= (uint64_t) PCIB_READ_CONFIG(pcib, b, s, f, reg + 4, 4) << 32;
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
Print the PCI resources even if they are disabled. This shows more clearly when the BIOS is forgetful about initialising the USB controllers.
2000-03-18 19:18:36 +00:00
if (bootverbose) {
printf("\tmap[%02x]: type %x, range %2d, base %08x, size %2d",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
reg, pci_maptype(map), ln2range,
(unsigned int) base, ln2size);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
if (type == SYS_RES_IOPORT && !pci_porten(pcib, b, s, f))
Print the PCI resources even if they are disabled. This shows more clearly when the BIOS is forgetful about initialising the USB controllers.
2000-03-18 19:18:36 +00:00
printf(", port disabled\n");
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
else if (type == SYS_RES_MEMORY && !pci_memen(pcib, b, s, f))
Print the PCI resources even if they are disabled. This shows more clearly when the BIOS is forgetful about initialising the USB controllers.
2000-03-18 19:18:36 +00:00
printf(", memory disabled\n");
else
printf(", enabled\n");
}
Unconditionally turning on the I/O and memory enable bits in the PCI command register is too aggressive. Revert to the previous behaviour, but leave the new behaviour available as an undocumented option. It's not clear what the Right, Right Thing is to do here, but the more conservative approach is safer.
2000-10-28 23:07:13 +00:00
/*
* This code theoretically does the right thing, but has
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
* undesirable side effects in some cases where peripherals
* respond oddly to having these bits enabled. Let the user
* be able to turn them off (since pci_enable_io_modes is 1 by
* default).
Unconditionally turning on the I/O and memory enable bits in the PCI command register is too aggressive. Revert to the previous behaviour, but leave the new behaviour available as an undocumented option. It's not clear what the Right, Right Thing is to do here, but the more conservative approach is safer.
2000-10-28 23:07:13 +00:00
*/
Make PCI_ENABLE_IO_MODES a sysctl hw.pci.enable_io_modes. It can also be set at boot time. It defaults to 1 now since it can be set in the boot loader. If this proves unwise, we can reset it to defaulting to 0.
2002-07-26 07:58:16 +00:00
if (pci_enable_io_modes) {
/* Turn on resources that have been left off by a lazy BIOS */
if (type == SYS_RES_IOPORT && !pci_porten(pcib, b, s, f)) {
cmd = PCIB_READ_CONFIG(pcib, b, s, f, PCIR_COMMAND, 2);
cmd |= PCIM_CMD_PORTEN;
PCIB_WRITE_CONFIG(pcib, b, s, f, PCIR_COMMAND, cmd, 2);
}
if (type == SYS_RES_MEMORY && !pci_memen(pcib, b, s, f)) {
cmd = PCIB_READ_CONFIG(pcib, b, s, f, PCIR_COMMAND, 2);
cmd |= PCIM_CMD_MEMEN;
PCIB_WRITE_CONFIG(pcib, b, s, f, PCIR_COMMAND, cmd, 2);
}
} else {
if (type == SYS_RES_IOPORT && !pci_porten(pcib, b, s, f))
return (1);
if (type == SYS_RES_MEMORY && !pci_memen(pcib, b, s, f))
return (1);
If a base address register has been set up by the BIOS, but the relevant enable bit hasn't been set in the command register, set the bit and honour the register. It seems that quite a few lazy BIOS writers aren't bothering to do this, which upsets the existing code and causes us to miss out on properly-configured devices.
2000-09-01 23:09:02 +00:00
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* If base is 0, then we have problems. It is best to ignore
* such entires for the moment. These will be allocated later if
* the driver specifically requests them.
*/
if (base == 0)
return 1;
Do not pre-allocate resources for BAR's on ATA MASTERDEV's thats on the standard ATA primary and secondary addresses. Reintroduce the size 1 ALTIO space so that we can have both ATA and floppies back working.
2004-04-20 20:57:29 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
start = base;
end = base + (1 << ln2size) - 1;
count = 1 << ln2size;
resource_list_add(rl, type, reg, start, end, count);
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* Not quite sure what to do on failure of allocating the resource
* since I can postulate several right answers.
*/
resource_list_alloc(rl, bus, dev, type, &reg, start, end, count, 0);
More style(9) nits
2002-06-01 05:44:45 +00:00
return ((ln2range == 64) ? 2 : 1);
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
}
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
static int
pci_is_ata_legacy(device_t dev)
{
/*
* ATA PCI in compatibility mode are hard wired to certain
* compatibility addresses. Such entries does not contain
* valid resources as they are at fixed positions to be
* compatible with old ISA requirements.
*/
if ((pci_get_class(dev) == PCIC_STORAGE) &&
(pci_get_subclass(dev) == PCIS_STORAGE_IDE) &&
(pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV) &&
!(pci_get_progif(dev) &
(PCIP_STORAGE_IDE_MODEPRIM | PCIP_STORAGE_IDE_MODESEC)))
return 1;
return 0;
}
/*
* The ATA PCI spec specifies that in legacy mode, the device shall
* decode the resources listed below. The ata driver allocates
* resources in this order, and many atapci devices actually have
* values similar to these in the actual underlying bars. Part of the
* problem is that the floppy controller and ata overlap for 1 byte,
* which makes it difficult to properly allocate things.
*
* My reading of the pci spec is such that this appears to be the only
* allowed exception to the rule that devices only decode the addresses
* presented in their BARs. We also ensure that the bits that take
* the device out of legacy mode are set to 0 before making this
* reservation.
*/
static void
pci_add_ata_legacy_maps(device_t pcib, device_t bus, device_t dev, int b,
int s, int f, struct resource_list *rl)
{
int rid;
int type;
type = SYS_RES_IOPORT;
if ((pci_get_progif(dev) & PCIP_STORAGE_IDE_MODEPRIM) == 0) {
rid = PCIR_BAR(0);
resource_list_add(rl, type, rid, 0x1f0, 0x1f7, 8);
resource_list_alloc(rl, bus, dev, type, &rid, 0x1f0, 0x1f7, 8,
0);
rid = PCIR_BAR(1);
resource_list_add(rl, type, rid, 0x3f6, 0x3f6, 1);
resource_list_alloc(rl, bus, dev, type, &rid, 0x3f6, 0x3f6, 1,
0);
}
if ((pci_get_progif(dev) & PCIP_STORAGE_IDE_MODESEC) == 0) {
rid = PCIR_BAR(2);
resource_list_add(rl, type, rid, 0x170, 0x177, 8);
resource_list_alloc(rl, bus, dev, type, &rid, 0x170, 0x177, 8,
0);
rid = PCIR_BAR(3);
resource_list_add(rl, type, rid, 0x376, 0x376, 1);
resource_list_alloc(rl, bus, dev, type, &rid, 0x376, 0x376, 1,
0);
}
pci_add_map(pcib, bus, dev, b, s, f, PCIR_BAR(4), rl);
}
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
static void
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
pci_add_resources(device_t pcib, device_t bus, device_t dev)
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
{
struct pci_devinfo *dinfo = device_get_ivars(dev);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
pcicfgregs *cfg = &dinfo->cfg;
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
struct resource_list *rl = &dinfo->resources;
struct pci_quirk *q;
- Adjust the comment about re-routing PCI interrupts to be less ia64-specific. - When trying to re-route interrupts, don't change cfg->intline if the re-route fails by returning an invalid vector. This fixes machines without any way of routing interrupts such as older PC's without a $PIR table. We do not currently write the new intline value back to the hardware, but we should. That will likely be added in a later commit.
2003-06-07 15:00:19 +00:00
int b, i, irq, f, s;
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
b = cfg->bus;
s = cfg->slot;
f = cfg->func;
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
if (pci_is_ata_legacy(dev))
pci_add_ata_legacy_maps(pcib, bus, dev, b, s, f, rl);
else
for (i = 0; i < cfg->nummaps;)
i += pci_add_map(pcib, bus, dev, b, s, f, PCIR_BAR(i),
rl);
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
for (q = &pci_quirks[0]; q->devid; q++) {
if (q->devid == ((cfg->device << 16) | cfg->vendor)
&& q->type == PCI_QUIRK_MAP_REG)
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_add_map(pcib, bus, dev, b, s, f, q->arg1, rl);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Fix some resource allocation peculiarities of the intpm device.
1999-10-28 08:06:59 +00:00
Use PCI_INTERRUPT_VALI in stead of hard coded 255
2002-06-01 05:48:58 +00:00
if (cfg->intpin > 0 && PCI_INTERRUPT_VALID(cfg->intline)) {
Initial landing of SMP support for FreeBSD/amd64. - This is heavily derived from John Baldwin's apic/pci cleanup on i386. - I have completely rewritten or drastically cleaned up some other parts. (in particular, bootstrap) - This is still a WIP. It seems that there are some highly bogus bioses on nVidia nForce3-150 boards. I can't stress how broken these boards are. I have a workaround in mind, but right now the Asus SK8N is broken. The Gigabyte K8NPro (nVidia based) is also mind-numbingly hosed. - Most of my testing has been with SCHED_ULE. SCHED_4BSD works. - the apic and acpi components are 'standard'. - If you have an nVidia nForce3-150 board, you are stuck with 'device atpic' in addition, because they somehow managed to forget to connect the 8254 timer to the apic, even though its in the same silicon! ARGH! This directly violates the ACPI spec.
2003-11-17 08:58:16 +00:00
#if defined(__ia64__) || defined(__i386__) || defined(__amd64__)
Re-route interrupts on ia64 so that we can get the I/O SAPIC interrupt numbers (the BIOS leaves legacy PIC interrupt numbers in the intline registers).
2001-10-05 10:33:42 +00:00
/*
- Adjust the comment about re-routing PCI interrupts to be less ia64-specific. - When trying to re-route interrupts, don't change cfg->intline if the re-route fails by returning an invalid vector. This fixes machines without any way of routing interrupts such as older PC's without a $PIR table. We do not currently write the new intline value back to the hardware, but we should. That will likely be added in a later commit.
2003-06-07 15:00:19 +00:00
* Try to re-route interrupts. Sometimes the BIOS or
* firmware may leave bogus values in these registers.
* If the re-route fails, then just stick with what we
* have.
Re-route interrupts on ia64 so that we can get the I/O SAPIC interrupt numbers (the BIOS leaves legacy PIC interrupt numbers in the intline registers).
2001-10-05 10:33:42 +00:00
*/
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
irq = PCI_ASSIGN_INTERRUPT(bus, dev);
When we re-route a PCI interrupt, write the new IRQ value into the intline register. Reviewed by: imp
2003-06-09 18:08:46 +00:00
if (PCI_INTERRUPT_VALID(irq)) {
pci_write_config(dev, PCIR_INTLINE, irq, 1);
- Adjust the comment about re-routing PCI interrupts to be less ia64-specific. - When trying to re-route interrupts, don't change cfg->intline if the re-route fails by returning an invalid vector. This fixes machines without any way of routing interrupts such as older PC's without a $PIR table. We do not currently write the new intline value back to the hardware, but we should. That will likely be added in a later commit.
2003-06-07 15:00:19 +00:00
cfg->intline = irq;
When we re-route a PCI interrupt, write the new IRQ value into the intline register. Reviewed by: imp
2003-06-09 18:08:46 +00:00
} else
Re-route interrupts on ia64 so that we can get the I/O SAPIC interrupt numbers (the BIOS leaves legacy PIC interrupt numbers in the intline registers).
2001-10-05 10:33:42 +00:00
#endif
- Adjust the comment about re-routing PCI interrupts to be less ia64-specific. - When trying to re-route interrupts, don't change cfg->intline if the re-route fails by returning an invalid vector. This fixes machines without any way of routing interrupts such as older PC's without a $PIR table. We do not currently write the new intline value back to the hardware, but we should. That will likely be added in a later commit.
2003-06-07 15:00:19 +00:00
irq = cfg->intline;
resource_list_add(rl, SYS_RES_IRQ, 0, irq, irq, 1);
Re-route interrupts on ia64 so that we can get the I/O SAPIC interrupt numbers (the BIOS leaves legacy PIC interrupt numbers in the intline registers).
2001-10-05 10:33:42 +00:00
}
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
void
pci_add_children(device_t dev, int busno, size_t dinfo_size)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
use a REG macro that was already defined. Reorder how the pci probing in handled. before adding devices, check to see if the slot is a multi-function device to see if we should probe all the functions. Original idea by: imp
2003-06-22 02:26:17 +00:00
#define REG(n, w) PCIB_READ_CONFIG(pcib, busno, s, f, n, w)
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
device_t pcib = device_get_parent(dev);
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
struct pci_devinfo *dinfo;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
int maxslots;
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
int s, f, pcifunchigh;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t hdrtype;
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
KASSERT(dinfo_size >= sizeof(struct pci_devinfo),
("dinfo_size too small"));
maxslots = PCIB_MAXSLOTS(pcib);
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
for (s = 0; s <= maxslots; s++) {
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
pcifunchigh = 0;
use a REG macro that was already defined. Reorder how the pci probing in handled. before adding devices, check to see if the slot is a multi-function device to see if we should probe all the functions. Original idea by: imp
2003-06-22 02:26:17 +00:00
f = 0;
- Rename PCIx_HEADERTYPE* to PCIx_HDRTYPE* so the constants aren't so long. - Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds the header type. - Replace several magic numbers with appropriate constants for the header type register and a couple of PCI_FUNCMAX. - Merge to amd64 the fix to the i386 bridge code to skip devices with unknown header types. Requested by: imp (1, 2)
2003-08-28 21:22:25 +00:00
hdrtype = REG(PCIR_HDRTYPE, 1);
if ((hdrtype & PCIM_HDRTYPE) > PCI_MAXHDRTYPE)
use a REG macro that was already defined. Reorder how the pci probing in handled. before adding devices, check to see if the slot is a multi-function device to see if we should probe all the functions. Original idea by: imp
2003-06-22 02:26:17 +00:00
continue;
if (hdrtype & PCIM_MFDEV)
pcifunchigh = PCI_FUNCMAX;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
for (f = 0; f <= pcifunchigh; f++) {
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
dinfo = pci_read_device(pcib, busno, s, f, dinfo_size);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
if (dinfo != NULL) {
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
pci_add_child(dev, dinfo);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
}
}
use a REG macro that was already defined. Reorder how the pci probing in handled. before adding devices, check to see if the slot is a multi-function device to see if we should probe all the functions. Original idea by: imp
2003-06-22 02:26:17 +00:00
#undef REG
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
void
pci_add_child(device_t bus, struct pci_devinfo *dinfo)
{
device_t pcib;
pcib = device_get_parent(bus);
dinfo->cfg.dev = device_add_child(bus, NULL, -1);
device_set_ivars(dinfo->cfg.dev, dinfo);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_cfg_save(dinfo->cfg.dev, dinfo, 0);
pci_cfg_restore(dinfo->cfg.dev, dinfo);
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
pci_add_resources(pcib, bus, dinfo->cfg.dev);
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
pci_print_verbose(dinfo);
}
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
static int
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
pci_probe(device_t dev)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
Convert DEVFS hooks in (most) drivers to make_dev(). Diskslice/label code not yet handled. Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers) Add the correct hook for devfs to kern_conf.c The net result of this excercise is that a lot less files depends on DEVFS, and devtoname() gets more sensible output in many cases. A few drivers had minor additional cleanups performed relating to cdevsw registration. A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
device_set_desc(dev, "PCI bus");
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
/* Allow other subclasses to override this driver. */
return (-1000);
}
static int
pci_attach(device_t dev)
{
int busno;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
/*
* Since there can be multiple independantly numbered PCI
* busses on some large alpha systems, we can't use the unit
* number to decide what bus we are probing. We ask the parent
* pcib what our bus number is.
*/
Validate the PCI bus number that we fetch from our parent, since there's no guarantee that everything attached to *it* is a PCI bus.
2000-10-09 00:43:45 +00:00
busno = pcib_get_bus(dev);
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
if (bootverbose)
device_printf(dev, "physical bus=%d\n", busno);
pci_add_children(dev, busno, sizeof(struct pci_devinfo));
return (bus_generic_attach(dev));
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
int
pci_suspend(device_t dev)
{
int numdevs;
device_t *devlist;
device_t child;
struct pci_devinfo *dinfo;
int i;
/*
* Save the pci configuration space for each child. We don't need
* to do this, unless the BIOS suspend code powers down the bus and
* the devices on the bus.
*/
device_get_children(dev, &devlist, &numdevs);
for (i = 0; i < numdevs; i++) {
child = devlist[i];
dinfo = (struct pci_devinfo *) device_get_ivars(child);
pci_cfg_save(child, dinfo, 0);
}
free(devlist, M_TEMP);
return (bus_generic_suspend(dev));
}
int
pci_resume(device_t dev)
{
int numdevs;
device_t *devlist;
device_t child;
struct pci_devinfo *dinfo;
int i;
/*
* Restore the pci configuration space for each child.
*/
device_get_children(dev, &devlist, &numdevs);
for (i = 0; i < numdevs; i++) {
child = devlist[i];
dinfo = (struct pci_devinfo *) device_get_ivars(child);
pci_cfg_restore(child, dinfo);
}
free(devlist, M_TEMP);
return (bus_generic_resume(dev));
}
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
2002-09-04 03:13:16 +00:00
static void
Various changes to make it easier to subclass the PCI bus device. - Make the pci devclass a global variable. - Add child devices in pci_attach() instead of pci_probe(). Change pci_probe() to just check for a valid bus number from the associated bridge and return -1000 if successful. This allows subclasses of the PCI bus driver to override the generic driver. - Move the code to load the vendor data into its own public function. Really though, doing this at attach is just plain wrong. This should really be done in the module load routine instead. As a side effect, the 'busno' variable in pci_attach() is now no longer static (minor bug that was harmless so far.) - Change pci_add_children() to take an extra argument that is the size of the device info structure passed to pci_read_device() and make it public so subclasses of the PCI bus can call it in their attach routines. - Move the bits to attach a probed PCI child to a PCI bus into a global pci_add_child() function. This will allow subclasses that can detect a PCI device not found in the normal PCI probe to add those devices in their own attach routine. (I have seen this in the ACPI tree on my laptop for example.) As a side effect, change the static function pci_add_resources() to get the busno, slot, and func from the passed in dinfo structure instead of requiring them as function arguments. Tested on: i386, alpha, ia64, sparc64
2002-08-26 15:23:52 +00:00
pci_load_vendor_data(void)
{
caddr_t vendordata, info;
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
2002-09-04 03:13:16 +00:00
if ((vendordata = preload_search_by_type("pci_vendor_data")) != NULL) {
info = preload_search_info(vendordata, MODINFO_ADDR);
pci_vendordata = *(char **)info;
info = preload_search_info(vendordata, MODINFO_SIZE);
pci_vendordata_size = *(size_t *)info;
/* terminate the database */
pci_vendordata[pci_vendordata_size] = '\n';
Convert DEVFS hooks in (most) drivers to make_dev(). Diskslice/label code not yet handled. Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers) Add the correct hook for devfs to kern_conf.c The net result of this excercise is that a lot less files depends on DEVFS, and devtoname() gets more sensible output in many cases. A few drivers had minor additional cleanups performed relating to cdevsw registration. A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
}
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
void
pci_driver_added(device_t dev, driver_t *driver)
{
int numdevs;
device_t *devlist;
device_t child;
struct pci_devinfo *dinfo;
int i;
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
device_printf(dev, "driver added\n");
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
DEVICE_IDENTIFY(driver, dev);
device_get_children(dev, &devlist, &numdevs);
for (i = 0; i < numdevs; i++) {
child = devlist[i];
if (device_get_state(child) != DS_NOTPRESENT)
continue;
dinfo = device_get_ivars(child);
pci_print_verbose(dinfo);
/*XXX???*/ /* resource_list_init(&dinfo->cfg.resources); */
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
printf("pci%d:%d:%d: reprobing on driver added\n",
dinfo->cfg.bus, dinfo->cfg.slot, dinfo->cfg.func);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_cfg_restore(child, dinfo);
if (device_probe_and_attach(child) != 0)
pci_cfg_save(child, dinfo, 1);
}
free(devlist, M_TEMP);
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
int
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_print_child(device_t dev, device_t child)
{
Print 'irq nn' on the device attach line like the old pci code did. However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP systems? (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
struct pci_devinfo *dinfo;
Show the port/mem/irq of pci devices too.
2000-01-08 10:12:21 +00:00
struct resource_list *rl;
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
int retval = 0;
Print 'irq nn' on the device attach line like the old pci code did. However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP systems? (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
dinfo = device_get_ivars(child);
Show the port/mem/irq of pci devices too.
2000-01-08 10:12:21 +00:00
rl = &dinfo->resources;
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
retval += bus_print_child_header(dev, child);
Use the new resource_list_print_type() function to print resource list contents, and the new __BUS_ACCESSOR macro to construct the accessor functions.
2001-12-21 21:49:57 +00:00
retval += resource_list_print_type(rl, "port", SYS_RES_IOPORT, "%#lx");
retval += resource_list_print_type(rl, "mem", SYS_RES_MEMORY, "%#lx");
retval += resource_list_print_type(rl, "irq", SYS_RES_IRQ, "%ld");
Show the port/mem/irq of pci devices too.
2000-01-08 10:12:21 +00:00
if (device_get_flags(dev))
retval += printf(" flags %#x", device_get_flags(dev));
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
retval += printf(" at device %d.%d", pci_get_slot(child),
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
pci_get_function(child));
Alter the behavior of sys/kern/subr_bus.c:device_print_child() - device_print_child() either lets the BUS_PRINT_CHILD method produce the entire device announcement message or it prints "foo0: not found\n" Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on the previous behavior of device_print_child() (printing the "foo0: <FooDevice 1.1>" bit of the announce message.) Provide bus_print_child_header() and bus_print_child_footer() to actually print the output for bus_generic_print_child(). These functions should be used whenever possible (unless you can just use bus_generic_print_child()) The BUS_PRINT_CHILD method now returns int instead of void. Modify everything else that defines or uses a BUS_PRINT_CHILD method to comply with the above changes. - Devices are 'on' a bus, not 'at' it. - If a custom BUS_PRINT_CHILD method does the same thing as bus_generic_print_child(), use bus_generic_print_child() - Use device_get_nameunit() instead of both device_get_name() and device_get_unit() - All BUS_PRINT_CHILD methods return the number of characters output. Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
retval += bus_print_child_footer(dev, child);
return (retval);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
static struct
{
int class;
int subclass;
char *desc;
} pci_nomatch_tab[] = {
{PCIC_OLD, -1, "old"},
{PCIC_OLD, PCIS_OLD_NONVGA, "non-VGA display device"},
{PCIC_OLD, PCIS_OLD_VGA, "VGA-compatible display device"},
{PCIC_STORAGE, -1, "mass storage"},
{PCIC_STORAGE, PCIS_STORAGE_SCSI, "SCSI"},
{PCIC_STORAGE, PCIS_STORAGE_IDE, "ATA"},
{PCIC_STORAGE, PCIS_STORAGE_FLOPPY, "floppy disk"},
{PCIC_STORAGE, PCIS_STORAGE_IPI, "IPI"},
{PCIC_STORAGE, PCIS_STORAGE_RAID, "RAID"},
{PCIC_NETWORK, -1, "network"},
{PCIC_NETWORK, PCIS_NETWORK_ETHERNET, "ethernet"},
{PCIC_NETWORK, PCIS_NETWORK_TOKENRING, "token ring"},
{PCIC_NETWORK, PCIS_NETWORK_FDDI, "fddi"},
{PCIC_NETWORK, PCIS_NETWORK_ATM, "ATM"},
{PCIC_DISPLAY, -1, "display"},
{PCIC_DISPLAY, PCIS_DISPLAY_VGA, "VGA"},
{PCIC_DISPLAY, PCIS_DISPLAY_XGA, "XGA"},
{PCIC_MULTIMEDIA, -1, "multimedia"},
{PCIC_MULTIMEDIA, PCIS_MULTIMEDIA_VIDEO, "video"},
{PCIC_MULTIMEDIA, PCIS_MULTIMEDIA_AUDIO, "audio"},
{PCIC_MEMORY, -1, "memory"},
{PCIC_MEMORY, PCIS_MEMORY_RAM, "RAM"},
{PCIC_MEMORY, PCIS_MEMORY_FLASH, "flash"},
{PCIC_BRIDGE, -1, "bridge"},
{PCIC_BRIDGE, PCIS_BRIDGE_HOST, "HOST-PCI"},
{PCIC_BRIDGE, PCIS_BRIDGE_ISA, "PCI-ISA"},
{PCIC_BRIDGE, PCIS_BRIDGE_EISA, "PCI-EISA"},
{PCIC_BRIDGE, PCIS_BRIDGE_MCA, "PCI-MCA"},
{PCIC_BRIDGE, PCIS_BRIDGE_PCI, "PCI-PCI"},
{PCIC_BRIDGE, PCIS_BRIDGE_PCMCIA, "PCI-PCMCIA"},
{PCIC_BRIDGE, PCIS_BRIDGE_NUBUS, "PCI-NuBus"},
{PCIC_BRIDGE, PCIS_BRIDGE_CARDBUS, "PCI-CardBus"},
{PCIC_BRIDGE, PCIS_BRIDGE_OTHER, "PCI-unknown"},
{PCIC_SIMPLECOMM, -1, "simple comms"},
{PCIC_SIMPLECOMM, PCIS_SIMPLECOMM_UART, "UART"}, /* could detect 16550 */
{PCIC_SIMPLECOMM, PCIS_SIMPLECOMM_PAR, "parallel port"},
{PCIC_BASEPERIPH, -1, "base peripheral"},
{PCIC_BASEPERIPH, PCIS_BASEPERIPH_PIC, "interrupt controller"},
{PCIC_BASEPERIPH, PCIS_BASEPERIPH_DMA, "DMA controller"},
{PCIC_BASEPERIPH, PCIS_BASEPERIPH_TIMER, "timer"},
{PCIC_BASEPERIPH, PCIS_BASEPERIPH_RTC, "realtime clock"},
{PCIC_INPUTDEV, -1, "input device"},
{PCIC_INPUTDEV, PCIS_INPUTDEV_KEYBOARD, "keyboard"},
{PCIC_INPUTDEV, PCIS_INPUTDEV_DIGITIZER,"digitizer"},
{PCIC_INPUTDEV, PCIS_INPUTDEV_MOUSE, "mouse"},
{PCIC_DOCKING, -1, "docking station"},
{PCIC_PROCESSOR, -1, "processor"},
{PCIC_SERIALBUS, -1, "serial bus"},
{PCIC_SERIALBUS, PCIS_SERIALBUS_FW, "FireWire"},
{PCIC_SERIALBUS, PCIS_SERIALBUS_ACCESS, "AccessBus"},
{PCIC_SERIALBUS, PCIS_SERIALBUS_SSA, "SSA"},
{PCIC_SERIALBUS, PCIS_SERIALBUS_USB, "USB"},
{PCIC_SERIALBUS, PCIS_SERIALBUS_FC, "Fibre Channel"},
{PCIC_SERIALBUS, PCIS_SERIALBUS_SMBUS, "SMBus"},
{0, 0, NULL}
};
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
void
Implement the BUS_PROBE_NOMATCH method for the PCI bus. This function is called for each device for which no driver was found. Output is similar to the eisa_probe_nomatch() function but with the added benefit of displaying the assigned IRQ (since PCI gives us this information up front.) Output is like so: pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9 pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9 pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9 pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9 I'm not happy with the 3 lines of macro cruft that got added but I consider it a temporary annoyance as those bits will be moved to some place where PCI, EISA and ISAPNP code will be able to use them. (Not surprisingly, this message is longer than the code in question.) Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
pci_probe_nomatch(device_t dev, device_t child)
{
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
int i;
char *cp, *scp, *device;
/*
* Look for a listing for this device in a loaded device database.
*/
if ((device = pci_describe_device(child)) != NULL) {
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
device_printf(dev, "<%s>", device);
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
free(device, M_DEVBUF);
} else {
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
/*
* Scan the class/subclass descriptions for a general
* description.
*/
cp = "unknown";
scp = NULL;
for (i = 0; pci_nomatch_tab[i].desc != NULL; i++) {
if (pci_nomatch_tab[i].class == pci_get_class(child)) {
if (pci_nomatch_tab[i].subclass == -1) {
cp = pci_nomatch_tab[i].desc;
} else if (pci_nomatch_tab[i].subclass ==
pci_get_subclass(child)) {
scp = pci_nomatch_tab[i].desc;
}
}
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
}
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
device_printf(dev, "<%s%s%s>",
Don't use GCC shorthand for ?: unless it really matters.
2002-09-28 17:47:51 +00:00
cp ? cp : "",
((cp != NULL) && (scp != NULL)) ? ", " : "",
scp ? scp : "");
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
}
Small nit: Make both prints use 'at device %d.%d'.
2001-09-01 23:06:14 +00:00
printf(" at device %d.%d (no driver attached)\n",
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
pci_get_slot(child), pci_get_function(child));
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_cfg_save(child, (struct pci_devinfo *) device_get_ivars(child), 1);
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
return;
}
Move the pretty printing of the description for USB controllers to pci_probe_nomatch, so it won't be in the way when loading USB as a module. The reason for them being there in the first place is that every motherboard comes with USB kit and this way it looks more pretty (peter). The real solution will be to define some method of detaching a driver after it has attached.
1999-11-22 03:34:43 +00:00
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
/*
* Parse the PCI device database, if loaded, and return a pointer to a
* description of the device.
*
* The database is flat text formatted as follows:
*
* Any line not in a valid format is ignored.
* Lines are terminated with newline '\n' characters.
*
* A VENDOR line consists of the 4 digit (hex) vendor code, a TAB, then
* the vendor name.
*
* A DEVICE line is entered immediately below the corresponding VENDOR ID.
* - devices cannot be listed without a corresponding VENDOR line.
* A DEVICE line consists of a TAB, the 4 digit (hex) device code,
* another TAB, then the device name.
*/
/*
* Assuming (ptr) points to the beginning of a line in the database,
* return the vendor or device and description of the next entry.
* The value of (vendor) or (device) inappropriate for the entry type
* is set to -1. Returns nonzero at the end of the database.
*
* Note that this is slightly unrobust in the face of corrupt data;
* we attempt to safeguard against this by spamming the end of the
* database with a newline when we initialise.
*/
static int
pci_describe_parse_line(char **ptr, int *vendor, int *device, char **desc)
{
char *cp = *ptr;
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
int left;
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
*device = -1;
*vendor = -1;
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
**desc = '\0';
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
for (;;) {
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
left = pci_vendordata_size - (cp - pci_vendordata);
if (left <= 0) {
*ptr = cp;
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
return(1);
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
}
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
/* vendor entry? */
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
if (*cp != '\t' &&
sscanf(cp, "%x\t%80[^\n]", vendor, *desc) == 2)
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
break;
/* device entry? */
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
if (*cp == '\t' &&
sscanf(cp, "%x\t%80[^\n]", device, *desc) == 2)
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
break;
/* skip to next line */
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
while (*cp != '\n' && left > 0) {
cp++;
left--;
}
if (*cp == '\n') {
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
cp++;
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
left--;
}
}
/* skip to next line */
while (*cp != '\n' && left > 0) {
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
cp++;
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
left--;
o No need to print the vendor/device ID for things that matched succesfully. o ``<device name>'' versus ``device name'' for things that fall under nomatch. Reviewed by: dfr (in principle) Approved by: Baron von Hubbard
2000-02-22 21:44:39 +00:00
}
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
if (*cp == '\n' && left > 0)
cp++;
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
*ptr = cp;
return(0);
}
static char *
pci_describe_device(device_t dev)
{
int vendor, device;
char *desc, *vp, *dp, *line;
desc = vp = dp = NULL;
/*
* If we have no vendor data, we can't do anything.
*/
if (pci_vendordata == NULL)
goto out;
/*
* Scan the vendor data looking for this device
*/
line = pci_vendordata;
if ((vp = malloc(80, M_DEVBUF, M_NOWAIT)) == NULL)
goto out;
for (;;) {
if (pci_describe_parse_line(&line, &vendor, &device, &vp))
goto out;
if (vendor == pci_get_vendor(dev))
break;
o No need to print the vendor/device ID for things that matched succesfully. o ``<device name>'' versus ``device name'' for things that fall under nomatch. Reviewed by: dfr (in principle) Approved by: Baron von Hubbard
2000-02-22 21:44:39 +00:00
}
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
if ((dp = malloc(80, M_DEVBUF, M_NOWAIT)) == NULL)
goto out;
for (;;) {
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
if (pci_describe_parse_line(&line, &vendor, &device, &dp)) {
*dp = 0;
break;
}
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
if (vendor != -1) {
*dp = 0;
break;
}
if (device == pci_get_device(dev))
break;
Implement the BUS_PROBE_NOMATCH method for the PCI bus. This function is called for each device for which no driver was found. Output is similar to the eisa_probe_nomatch() function but with the added benefit of displaying the assigned IRQ (since PCI gives us this information up front.) Output is like so: pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9 pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9 pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9 pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9 I'm not happy with the 3 lines of macro cruft that got added but I consider it a temporary annoyance as those bits will be moved to some place where PCI, EISA and ISAPNP code will be able to use them. (Not surprisingly, this message is longer than the code in question.) Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
}
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
if (dp[0] == '\0')
snprintf(dp, 80, "0x%x", pci_get_device(dev));
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
if ((desc = malloc(strlen(vp) + strlen(dp) + 3, M_DEVBUF, M_NOWAIT)) !=
NULL)
- Fix the device database parsing code so that it actually works. - Improve the formatting for devices identified by the database. - Fix the pcib_route_interrupt method definition, as an old version snuck in here somehow 8( - Remove a couple of the vendor/device IDs for PCI:ISA bridges which correctly identify themselves. Submitted by: peter
2000-12-09 09:15:38 +00:00
sprintf(desc, "%s, %s", vp, dp);
Next phase in the PCI subsystem cleanup. - Move PCI core code to dev/pci. - Split bridge code out into separate modules. - Remove the descriptive strings from the bridge drivers. If you want to know what a device is, use pciconf. Add support for broadly identifying devices based on class/subclass, and for parsing a preloaded device identification database so that if you want to waste the memory, you can identify *anything* we know about. - Remove machine-dependant code from the core PCI code. APIC interrupt mapping is performed by shadowing the intline register in machine- dependant code. - Bring interrupt routing support to the Alpha (although many platforms don't yet support routing or mapping interrupts entirely correctly). This resulted in spamming <sys/bus.h> into more places than it really should have gone. - Put sys/dev on the kernel/modules include path. This avoids having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00
out:
if (vp != NULL)
free(vp, M_DEVBUF);
if (dp != NULL)
free(dp, M_DEVBUF);
return(desc);
Implement the BUS_PROBE_NOMATCH method for the PCI bus. This function is called for each device for which no driver was found. Output is similar to the eisa_probe_nomatch() function but with the added benefit of displaying the assigned IRQ (since PCI gives us this information up front.) Output is like so: pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9 pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9 pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9 pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9 I'm not happy with the 3 lines of macro cruft that got added but I consider it a temporary annoyance as those bits will be moved to some place where PCI, EISA and ISAPNP code will be able to use them. (Not surprisingly, this message is longer than the code in question.) Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
int
Fixed the type of some ivar access functions. Ivars have type uintptr_t, not u_long. On i386's with 64-bit longs, returning u_longs indirectly in (more than) the space reserved for uintptr_t's tended to corrupt the previous frame pointer in the stack frame, so it was not easy to debug. The type mismatches are hidden by the bogus cast in DEVMETHOD().
2000-04-30 10:01:56 +00:00
pci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
switch (which) {
Add a new cardbus specific ivar: PCI_IVAR_ETHADDR. Some pci-like buses support querying the MAC address in a standard-for-that-bus way. The base pci bus returns NULL for this IVAR always. Submitted by: sam Approved by: re (blanket for NEWCARD)
2002-11-27 06:41:28 +00:00
case PCI_IVAR_ETHADDR:
/*
* The generic accessor doesn't deal with failure, so
* we set the return value, then return an error.
*/
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
*((uint8_t **) result) = NULL;
Add a new cardbus specific ivar: PCI_IVAR_ETHADDR. Some pci-like buses support querying the MAC address in a standard-for-that-bus way. The base pci bus returns NULL for this IVAR always. Submitted by: sam Approved by: re (blanket for NEWCARD)
2002-11-27 06:41:28 +00:00
return (EINVAL);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
case PCI_IVAR_SUBVENDOR:
*result = cfg->subvendor;
break;
case PCI_IVAR_SUBDEVICE:
*result = cfg->subdevice;
break;
case PCI_IVAR_VENDOR:
*result = cfg->vendor;
break;
case PCI_IVAR_DEVICE:
*result = cfg->device;
break;
case PCI_IVAR_DEVID:
*result = (cfg->device << 16) | cfg->vendor;
break;
case PCI_IVAR_CLASS:
*result = cfg->baseclass;
break;
case PCI_IVAR_SUBCLASS:
*result = cfg->subclass;
break;
case PCI_IVAR_PROGIF:
*result = cfg->progif;
break;
case PCI_IVAR_REVID:
*result = cfg->revid;
break;
case PCI_IVAR_INTPIN:
*result = cfg->intpin;
break;
case PCI_IVAR_IRQ:
*result = cfg->intline;
break;
case PCI_IVAR_BUS:
*result = cfg->bus;
break;
case PCI_IVAR_SLOT:
*result = cfg->slot;
break;
case PCI_IVAR_FUNCTION:
*result = cfg->func;
break;
default:
More style(9) nits
2002-06-01 05:44:45 +00:00
return (ENOENT);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
More style(9) nits
2002-06-01 05:44:45 +00:00
return (0);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
int
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
struct pci_devinfo *dinfo;
dinfo = device_get_ivars(child);
switch (which) {
Allow to write the intpin ivar using the pci_set_intpin() accessor. There are some Sun PCI devices around which bogusly set intpin to 0, although they use the intline mechanism; this allows the device driver to correct that. Reviewed by: imp
2003-07-01 13:54:10 +00:00
case PCI_IVAR_INTPIN:
dinfo->cfg.intpin = value;
return (0);
Add a new cardbus specific ivar: PCI_IVAR_ETHADDR. Some pci-like buses support querying the MAC address in a standard-for-that-bus way. The base pci bus returns NULL for this IVAR always. Submitted by: sam Approved by: re (blanket for NEWCARD)
2002-11-27 06:41:28 +00:00
case PCI_IVAR_ETHADDR:
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
case PCI_IVAR_SUBVENDOR:
case PCI_IVAR_SUBDEVICE:
case PCI_IVAR_VENDOR:
case PCI_IVAR_DEVICE:
case PCI_IVAR_DEVID:
case PCI_IVAR_CLASS:
case PCI_IVAR_SUBCLASS:
case PCI_IVAR_PROGIF:
case PCI_IVAR_REVID:
case PCI_IVAR_IRQ:
case PCI_IVAR_BUS:
case PCI_IVAR_SLOT:
case PCI_IVAR_FUNCTION:
More style(9) nits
2002-06-01 05:44:45 +00:00
return (EINVAL); /* disallow for now */
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
default:
More style(9) nits
2002-06-01 05:44:45 +00:00
return (ENOENT);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
}
Add a new command: show pciregs, equivalent to pciconf -l Reviewed by: Doug Rabson (quite some time ago) MFC after: 1 week
2002-08-28 10:02:59 +00:00
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
#include <sys/cons.h>
/*
* List resources based on pci map registers, used for within ddb
*/
DB_SHOW_COMMAND(pciregs, db_pci_dump)
{
struct pci_devinfo *dinfo;
struct devlist *devlist_head;
struct pci_conf *p;
const char *name;
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
int i, error, none_count, quit;
Add a new command: show pciregs, equivalent to pciconf -l Reviewed by: Doug Rabson (quite some time ago) MFC after: 1 week
2002-08-28 10:02:59 +00:00
none_count = 0;
/* get the head of the device queue */
devlist_head = &pci_devq;
/*
* Go through the list of devices and print out devices
*/
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
db_setup_paging(db_simple_pager, &quit, DB_LINES_PER_PAGE);
for (error = 0, i = 0, quit = 0,
Add a new command: show pciregs, equivalent to pciconf -l Reviewed by: Doug Rabson (quite some time ago) MFC after: 1 week
2002-08-28 10:02:59 +00:00
dinfo = STAILQ_FIRST(devlist_head);
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
(dinfo != NULL) && (error == 0) && (i < pci_numdevs) && !quit;
Add a new command: show pciregs, equivalent to pciconf -l Reviewed by: Doug Rabson (quite some time ago) MFC after: 1 week
2002-08-28 10:02:59 +00:00
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
/* Populate pd_name and pd_unit */
name = NULL;
if (dinfo->cfg.dev)
name = device_get_name(dinfo->cfg.dev);
p = &dinfo->conf;
db_printf("%s%d@pci%d:%d:%d:\tclass=0x%06x card=0x%08x "
"chip=0x%08x rev=0x%02x hdr=0x%02x\n",
(name && *name) ? name : "none",
(name && *name) ? (int)device_get_unit(dinfo->cfg.dev) :
none_count++,
p->pc_sel.pc_bus, p->pc_sel.pc_dev,
p->pc_sel.pc_func, (p->pc_class << 16) |
(p->pc_subclass << 8) | p->pc_progif,
(p->pc_subdevice << 16) | p->pc_subvendor,
(p->pc_device << 16) | p->pc_vendor,
p->pc_revid, p->pc_hdr);
}
}
#endif /* DDB */
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
static struct resource *
pci_alloc_map(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
struct resource_list *rl = &dinfo->resources;
struct resource_list_entry *rle;
struct resource *res;
uint32_t map, testval;
int mapsize;
/*
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
* Weed out the bogons, and figure out how large the BAR/map
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
* is. Bars that read back 0 here are bogus and unimplemented.
* Note: atapci in legacy mode are special and handled elsewhere
* in the code. If you have a atapci device in legacy mode and
* it fails here, that other code is broken.
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
*/
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
res = NULL;
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
map = pci_read_config(child, *rid, 4);
pci_write_config(child, *rid, 0xffffffff, 4);
testval = pci_read_config(child, *rid, 4);
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
if (testval == 0)
return (NULL);
if (pci_maptype(testval) & PCI_MAPMEM) {
if (type != SYS_RES_MEMORY) {
device_printf(child,
"failed: rid %#x is memory, requested %d\n",
*rid, type);
goto out;
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
}
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
} else {
if (type != SYS_RES_IOPORT) {
make the bad bar warning less scary, and toss it behind a bootverbose. It is harmless, but freaking people out.
2004-04-16 04:53:19 +00:00
device_printf(child,
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
"failed: rid %#x is ioport, requested %d\n",
*rid, type);
goto out;
}
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
}
ata devices in legacy are special, and we must treat them as such. While I would have prefered to have a solution that didn't move knowledge of this into the pci layer. However, this is literally the only exception that's listed in the PCI standard to the usual way of decoding BARs. atapci devices in legacy mode now ignore the first 4 bars and hard code the values to the legacy ide values (well, for each of the controllers that are in legacy mode). The 5th bar is handled normally. Remove the zero bar handling. zero bars should be ignored at all other times, and since we handle that specially, we don't need the older workaround.
2004-04-21 20:19:56 +00:00
/*
* For real BARs, we need to override the size that
* the driver requests, because that's what the BAR
* actually uses and we would otherwise have a
* situation where we might allocate the excess to
* another driver, which won't work.
*/
mapsize = pci_mapsize(testval);
count = 1 << mapsize;
if (RF_ALIGNMENT(flags) < mapsize)
flags = (flags & ~RF_ALIGNMENT_MASK) | RF_ALIGNMENT_LOG2(mapsize);
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* Allocate enough resource, and then write back the
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
* appropriate bar for that resource.
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
*/
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child, type, rid,
start, end, count, flags);
if (res == NULL) {
device_printf(child, "%#lx bytes of rid %#x res %d failed.\n",
count, *rid, type);
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
goto out;
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
}
resource_list_add(rl, type, *rid, start, end, count);
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
panic("pci_alloc_map: unexpedly can't find resource.");
rle->res = res;
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
device_printf(child,
"Lazy allocation of %#lx bytes rid %#x type %d at %#lx\n",
count, *rid, type, rman_get_start(res));
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
map = rman_get_start(res);
out:;
pci_write_config(child, *rid, map, 4);
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
return (res);
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
struct resource *
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
pci_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
struct pci_devinfo *dinfo = device_get_ivars(child);
struct resource_list *rl = &dinfo->resources;
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
struct resource_list_entry *rle;
When a pci device hasn't had an interrupt routed to it (signified by the intline of 255) go ahead and route the interrupt when we allocate an interrupt. Submitted by: msmith
2000-10-16 07:24:00 +00:00
pcicfgregs *cfg = &dinfo->cfg;
/*
* Perform lazy resource allocation
*/
if (device_get_parent(child) == dev) {
When the driver allocates memory or I/O ports, enable that bit in the command config register. At the present, this represents a nop because these bits should have been set earlier in the process. In the future, we'll only set these bits when the driver requests the resource, not when the bus code detects the resource. Reviewed by: mdodd
2003-04-15 19:38:18 +00:00
switch (type) {
case SYS_RES_IRQ:
/*
* If the child device doesn't have an
* interrupt routed and is deserving of an
* interrupt, try to assign it one.
*/
if (!PCI_INTERRUPT_VALID(cfg->intline) &&
(cfg->intpin != 0)) {
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
cfg->intline = PCI_ASSIGN_INTERRUPT(dev, child);
When the driver allocates memory or I/O ports, enable that bit in the command config register. At the present, this represents a nop because these bits should have been set earlier in the process. In the future, we'll only set these bits when the driver requests the resource, not when the bus code detects the resource. Reviewed by: mdodd
2003-04-15 19:38:18 +00:00
if (PCI_INTERRUPT_VALID(cfg->intline)) {
pci_write_config(child, PCIR_INTLINE,
cfg->intline, 1);
resource_list_add(rl, SYS_RES_IRQ, 0,
cfg->intline, cfg->intline, 1);
}
When a pci device hasn't had an interrupt routed to it (signified by the intline of 255) go ahead and route the interrupt when we allocate an interrupt. Submitted by: msmith
2000-10-16 07:24:00 +00:00
}
When the driver allocates memory or I/O ports, enable that bit in the command config register. At the present, this represents a nop because these bits should have been set earlier in the process. In the future, we'll only set these bits when the driver requests the resource, not when the bus code detects the resource. Reviewed by: mdodd
2003-04-15 19:38:18 +00:00
break;
case SYS_RES_IOPORT:
case SYS_RES_MEMORY:
Replace another instance of PCIR_MAPS with PCIR_BAR(x). Reminded by: dfr
2003-09-03 15:24:31 +00:00
if (*rid < PCIR_BAR(cfg->nummaps)) {
Don't try to enable io or memory access for non-standard resource addresses. This stops resource allocations for e.g. amdpm failing - this has its own special ways of enabling access.
2003-09-01 15:01:49 +00:00
/*
* Enable the I/O mode. We should
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
* also be assigning resources too
* when none are present. The
* resource_list_alloc kind of sorta does
* this...
Don't try to enable io or memory access for non-standard resource addresses. This stops resource allocations for e.g. amdpm failing - this has its own special ways of enabling access.
2003-09-01 15:01:49 +00:00
*/
if (PCI_ENABLE_IO(dev, child, type))
return (NULL);
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (pci_alloc_map(dev, child, type, rid,
start, end, count, flags));
When the driver allocates memory or I/O ports, enable that bit in the command config register. At the present, this represents a nop because these bits should have been set earlier in the process. In the future, we'll only set these bits when the driver requests the resource, not when the bus code detects the resource. Reviewed by: mdodd
2003-04-15 19:38:18 +00:00
break;
When a pci device hasn't had an interrupt routed to it (signified by the intline of 255) go ahead and route the interrupt when we allocate an interrupt. Submitted by: msmith
2000-10-16 07:24:00 +00:00
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* If we've already allocated the resource, then
* return it now. But first we may need to activate
* it, since we don't allocate the resource as active
* above. Normally this would be done down in the
* nexus, but since we short-circuit that path we have
* to do its job here. Not sure if we should free the
* resource if it fails to activate.
*/
rle = resource_list_find(rl, type, *rid);
if (rle != NULL && rle->res != NULL) {
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
device_printf(child,
Some devices have what appear to be invalid BARs. They are invalid in the sense that any write to them reads back as a 0. This presents a problem to our resource allocation scheme. If we encounter such vars, the code now treats them as special, allowing any allocation against them to succeed. I've not seen anything in the standard to clearify what host software should do when it encounters these sorts of BARs. Also cleaned up some output while I'm here and add commmented out bootverbose lines until I'm ready to reduce the verbosity of boot messages. This gets a number of south bridges and ata controllers made mostly by VIA, AMD and nVidia working again. Thanks to Soren Schmidt for his help in coming up with this patch.
2004-04-13 19:31:57 +00:00
"Reserved %#lx bytes for rid %#x type %d at %#lx\n",
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
rman_get_size(rle->res), *rid, type,
rman_get_start(rle->res));
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
if ((flags & RF_ACTIVE) &&
bus_generic_activate_resource(dev, child, type,
*rid, rle->res) != 0)
return NULL;
return (rle->res);
}
When a pci device hasn't had an interrupt routed to it (signified by the intline of 255) go ahead and route the interrupt when we allocate an interrupt. Submitted by: msmith
2000-10-16 07:24:00 +00:00
}
More style(9) nits
2002-06-01 05:44:45 +00:00
return (resource_list_alloc(rl, dev, child, type, rid,
start, end, count, flags));
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
void
Reduce code duplication by using the GET_RESOURCE_LIST bus method and related generic resource_list management functions. I'll deal with the EISA bits later. Not objected to by: new-bus
2000-11-28 07:12:12 +00:00
pci_delete_resource(device_t dev, device_t child, int type, int rid)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
struct pci_devinfo *dinfo;
struct resource_list *rl;
struct resource_list_entry *rle;
if (device_get_parent(child) != dev)
return;
dinfo = device_get_ivars(child);
rl = &dinfo->resources;
rle = resource_list_find(rl, type, rid);
if (rle) {
if (rle->res) {
Use rman_get_device rather than rle->resl->r_dev. make pci_hdrtypedata and pci_read_extcap accessible (but maybe in the end we'll make them private again).
2003-02-16 02:02:44 +00:00
if (rman_get_device(rle->res) != dev ||
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
rman_get_flags(rle->res) & RF_ACTIVE) {
device_printf(dev, "delete_resource: "
"Resource still owned by child, oops. "
"(type=%d, rid=%d, addr=%lx)\n",
rle->type, rle->rid,
rman_get_start(rle->res));
return;
}
bus_release_resource(dev, type, rid, rle->res);
}
resource_list_delete(rl, type, rid);
}
More style(9) nits
2002-06-01 05:44:45 +00:00
/*
* Why do we turn off the PCI configuration BAR when we delete a
* resource? -- imp
*/
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
pci_write_config(child, rid, 0, 4);
BUS_DELETE_RESOURCE(device_get_parent(dev), child, type, rid);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
struct resource_list *
Reduce code duplication by using the GET_RESOURCE_LIST bus method and related generic resource_list management functions. I'll deal with the EISA bits later. Not objected to by: new-bus
2000-11-28 07:12:12 +00:00
pci_get_resource_list (device_t dev, device_t child)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
struct pci_devinfo *dinfo = device_get_ivars(child);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
return (&dinfo->resources);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_read_config_method(device_t dev, device_t child, int reg, int width)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
More style(9) nits
2002-06-01 05:44:45 +00:00
return (PCIB_READ_CONFIG(device_get_parent(dev),
cfg->bus, cfg->slot, cfg->func, reg, width));
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Use the pci.c code wherever possible, rather than copying all the pci code into cardbus and s/pci/cardbus. This exposes a few pci_* functions that are now static. This work is similar to work Justin posted to the mobile list about a year or two ago, which I have neglected since then. This is a subset of his current work with the multiple inheritance newbus architecutre. When completed, that will eliminate the need for pci/pci_private.h. Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
void
More style(9) nits
2002-06-01 05:44:45 +00:00
pci_write_config_method(device_t dev, device_t child, int reg,
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t val, int width)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
PCIB_WRITE_CONFIG(device_get_parent(dev),
Make this file mostly conform to style(9). Approved by: msmith in principle before walkabout
2002-06-01 03:41:02 +00:00
cfg->bus, cfg->slot, cfg->func, reg, val, width);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Move the pnp and location info into the common pci bus. Make all known pci busses implement this. Also minor comment smithing in cardbus. Fix copyright to this year with my name on it since I've been doing a lot to this file. Reviewed by: jhb
2003-02-17 21:20:35 +00:00
int
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_child_location_str_method(device_t dev, device_t child, char *buf,
Move the pnp and location info into the common pci bus. Make all known pci busses implement this. Also minor comment smithing in cardbus. Fix copyright to this year with my name on it since I've been doing a lot to this file. Reviewed by: jhb
2003-02-17 21:20:35 +00:00
size_t buflen)
{
struct pci_devinfo *dinfo;
dinfo = device_get_ivars(child);
snprintf(buf, buflen, "slot=%d function=%d", pci_get_slot(child),
pci_get_function(child));
return (0);
}
int
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
pci_child_pnpinfo_str_method(device_t dev, device_t child, char *buf,
Move the pnp and location info into the common pci bus. Make all known pci busses implement this. Also minor comment smithing in cardbus. Fix copyright to this year with my name on it since I've been doing a lot to this file. Reviewed by: jhb
2003-02-17 21:20:35 +00:00
size_t buflen)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
snprintf(buf, buflen, "vendor=0x%04x device=0x%04x subvendor=0x%04x "
Include class designation in pnpinfo for generic driver loading
2003-02-18 03:25:57 +00:00
"subdevice=0x%04x class=0x%02x%02x%02x", cfg->vendor, cfg->device,
cfg->subvendor, cfg->subdevice, cfg->baseclass, cfg->subclass,
cfg->progif);
Move the pnp and location info into the common pci bus. Make all known pci busses implement this. Also minor comment smithing in cardbus. Fix copyright to this year with my name on it since I've been doing a lot to this file. Reviewed by: jhb
2003-02-17 21:20:35 +00:00
return (0);
}
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks. It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly. Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one. Reviewed by: imp, -hackers
2003-07-01 14:08:33 +00:00
int
pci_assign_interrupt_method(device_t dev, device_t child)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
return (PCIB_ROUTE_INTERRUPT(device_get_parent(dev), child,
cfg->intpin));
}
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
static int
pci_modevent(module_t mod, int what, void *arg)
{
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
2002-09-04 03:13:16 +00:00
static dev_t pci_cdev;
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
switch (what) {
case MOD_LOAD:
Argh, don't clobber the pci device list if there are multiple busses! (An AGP counts as a PCI bus, it seems...) This stopped 'pciconf -l' from working on AGP or PCI->PCI bridge systems.
1999-05-09 15:54:04 +00:00
STAILQ_INIT(&pci_devq);
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
pci_generation = 0;
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
2002-09-04 03:13:16 +00:00
pci_cdev = make_dev(&pcicdev, 0, UID_ROOT, GID_WHEEL, 0644,
"pci");
pci_load_vendor_data();
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
break;
case MOD_UNLOAD:
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
2002-09-04 03:13:16 +00:00
destroy_dev(pci_cdev);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
break;
}
More style(9) nits
2002-06-01 05:44:45 +00:00
return (0);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
}
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
static void
pci_cfg_restore(device_t dev, struct pci_devinfo *dinfo)
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
{
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
int i;
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
* Only do header type 0 devices. Type 1 devices are bridges,
* which we know need special treatment. Type 2 devices are
* cardbus bridges which also require special treatment.
* Other types are unknown, and we err on the side of safety
* by ignoring them.
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
*/
if (dinfo->cfg.hdrtype != 0)
return;
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
/*
* Restore the device to full power mode. We must do this
* before we restore the registers because moving from D3 to
* D0 will cause the chip's BARs and some other registers to
* be reset to some unknown power on reset values. Cut down
* the noise on boot by doing nothing if we are already in
* state D0.
*/
if (pci_do_powerstate && (pci_get_powerstate(dev) != PCI_POWERSTATE_D0)) {
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
printf(
"pci%d:%d:%d: Transition from D%d to D0\n",
dinfo->cfg.bus, dinfo->cfg.slot, dinfo->cfg.func,
pci_get_powerstate(dev));
Only print state change message for real state changes. When we set a device in D0 to D0, that's a no-op, however the messages seem to be confusing some people. Eventually, these messages will be parked behind a if (bootverbose). # I don't think this will fix any real bugs...
2004-04-09 20:41:18 +00:00
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
for (i = 0; i < dinfo->cfg.nummaps; i++)
pci_write_config(dev, PCIR_MAPS + i * 4, dinfo->cfg.bar[i], 4);
pci_write_config(dev, PCIR_BIOS, dinfo->cfg.bios, 4);
pci_write_config(dev, PCIR_COMMAND, dinfo->cfg.cmdreg, 2);
pci_write_config(dev, PCIR_INTLINE, dinfo->cfg.intline, 1);
pci_write_config(dev, PCIR_INTPIN, dinfo->cfg.intpin, 1);
pci_write_config(dev, PCIR_MINGNT, dinfo->cfg.mingnt, 1);
pci_write_config(dev, PCIR_MAXLAT, dinfo->cfg.maxlat, 1);
pci_write_config(dev, PCIR_CACHELNSZ, dinfo->cfg.cachelnsz, 1);
pci_write_config(dev, PCIR_LATTIMER, dinfo->cfg.lattimer, 1);
}
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
static void
pci_cfg_save(device_t dev, struct pci_devinfo *dinfo, int setstate)
{
int i;
uint32_t cls;
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
int ps;
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* Only do header type 0 devices. Type 1 devices are bridges, which
* we know need special treatment. Type 2 devices are cardbus bridges
* which also require special treatment. Other types are unknown, and
* we err on the side of safety by ignoring them. Powering down
* bridges should not be undertaken lightly.
*/
if (dinfo->cfg.hdrtype != 0)
return;
for (i = 0; i < dinfo->cfg.nummaps; i++)
dinfo->cfg.bar[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4);
dinfo->cfg.bios = pci_read_config(dev, PCIR_BIOS, 4);
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* Some drivers apparently write to these registers w/o
* updating our cahced copy. No harm happens if we update the
* copy, so do so here so we can restore them. The COMMAND
* register is modified by the bus w/o updating the cache. This
* should represent the normally writable portion of the 'defined'
* part of type 0 headers. In theory we also need to save/restore
* the PCI capability structures we know about, but apart from power
* we don't know any that are writable.
*/
dinfo->cfg.cmdreg = pci_read_config(dev, PCIR_COMMAND, 2);
dinfo->cfg.intline = pci_read_config(dev, PCIR_INTLINE, 1);
dinfo->cfg.intpin = pci_read_config(dev, PCIR_INTPIN, 1);
dinfo->cfg.mingnt = pci_read_config(dev, PCIR_MINGNT, 1);
dinfo->cfg.maxlat = pci_read_config(dev, PCIR_MAXLAT, 1);
dinfo->cfg.cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
dinfo->cfg.lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
/*
* don't set the state for display devices and for memory devices
* since bad things happen. we should (a) have drivers that can easily
* detach and (b) use generic drivers for these devices so that some
* device actually attaches. We need to make sure that when we
* implement (a) we don't power the device down on a reattach.
*/
cls = pci_get_class(dev);
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
if (pci_do_powerstate && setstate && cls != PCIC_DISPLAY && cls != PCIC_MEMORY) {
/*
* PCI spec is clear that we can only go into D3 state from
* D0 state. Transition from D[12] into D0 before going
* to D3 state.
*/
ps = pci_get_powerstate(dev);
if (ps != PCI_POWERSTATE_D0 && ps != PCI_POWERSTATE_D3) {
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
printf(
"pci%d:%d:%d: Transition from D%d to D0\n",
dinfo->cfg.bus, dinfo->cfg.slot,
dinfo->cfg.func, ps);
Add system tunable to turn off power state changes. Default to off until we get the resource allocation stuff hammered out. Fix and off by one error that caused unnecessary filtering of valid BARs for only 4 bytes than ICH3 and other PCI IDE controllers have. Andrew Gallatin submitted this, although it doesn't solve the problems ICH3 controllers have with the new code, it does restore the former resource list on the probe line.
2004-04-11 07:02:49 +00:00
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
}
Only print state change message for real state changes. When we set a device in D0 to D0, that's a no-op, however the messages seem to be confusing some people. Eventually, these messages will be parked behind a if (bootverbose). # I don't think this will fix any real bugs...
2004-04-09 20:41:18 +00:00
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D3) {
make the pci power state and resource code a lot less chatty. The chattiness was left in for debugging, but now that nearly all of the problems relating to the changes have been fixed, it is only annoying. It is still available via bootverbose. Prodded by: jhb
2004-05-21 06:03:26 +00:00
if (bootverbose)
printf(
"pci%d:%d:%d: Transition from D0 to D3\n",
dinfo->cfg.bus, dinfo->cfg.slot,
dinfo->cfg.func);
Only print state change message for real state changes. When we set a device in D0 to D0, that's a no-op, however the messages seem to be confusing some people. Eventually, these messages will be parked behind a if (bootverbose). # I don't think this will fix any real bugs...
2004-04-09 20:41:18 +00:00
pci_set_powerstate(dev, PCI_POWERSTATE_D3);
}
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree. Please report any bugs to me.
2004-04-09 15:44:34 +00:00
}
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
2003-09-17 08:32:44 +00:00
}
Reference in New Issue Copy Permalink