d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
967cbe64b1
freebsd-dev/sys/arm/conf/GENERIC

281 lines
6.8 KiB
Plaintext
Raw Normal View History

Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
#
# GENERICV6 -- Generic(ish) kernel config.
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
Update several more URLs - Primarily http -> https - Primarily FreeBSD project URLs
2017-10-29 08:17:03 +00:00
# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
Update several more URLs - Primarily http -> https - Primarily FreeBSD project URLs
2017-10-29 08:17:03 +00:00
# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$
ident GENERIC
Remake support for SMP kernel on UP cpu: - Use new option SMP_ON_UP instead of (mis)using specific CPU type. By this, any SMP kernel can be compiled with SMP_ON_UP support. - Enable runtime detection of CPU multiprocessor extensions only if SMP_ON_UP option is used. In other cases (pure SMP or UP), statically compile only required variant. - Don't leak multiprocessor instructions to UP kernel. - Correctly handle data cache write back to point of unification. DCCMVAU is supported on all armv7 cpus. - For SMP_ON_UP kernels, detect proper TTB flags on runtime. Differential Revision: https://reviews.freebsd.org/D9133
2017-02-02 06:14:44 +00:00
cpu CPU_CORTEXA
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
cpu CPU_MV_PJ4B
Remake support for SMP kernel on UP cpu: - Use new option SMP_ON_UP instead of (mis)using specific CPU type. By this, any SMP kernel can be compiled with SMP_ON_UP support. - Enable runtime detection of CPU multiprocessor extensions only if SMP_ON_UP option is used. In other cases (pure SMP or UP), statically compile only required variant. - Don't leak multiprocessor instructions to UP kernel. - Correctly handle data cache write back to point of unification. DCCMVAU is supported on all armv7 cpus. - For SMP_ON_UP kernels, detect proper TTB flags on runtime. Differential Revision: https://reviews.freebsd.org/D9133
2017-02-02 06:14:44 +00:00
options SMP_ON_UP
Tag all armv7 kernels as such in their machine config line. Transition all boards that support arm cortex CPUs to armv7. This leaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835 which has a ARM1176 core, and VERSATILEPB, which is a qemu board setup around the time RPI-B went in. Copy std.armv6 to std.armv7, even though that duplicates a lot of stuff. More work needs to be done to sort out the duplication. Differential Revision: https://reviews.freebsd.org/D12027
2017-10-05 23:01:50 +00:00
machine arm armv7
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
makeoptions CONF_CFLAGS="-march=armv7a"
Tag all armv7 kernels as such in their machine config line. Transition all boards that support arm cortex CPUs to armv7. This leaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835 which has a ARM1176 core, and VERSATILEPB, which is a qemu board setup around the time RPI-B went in. Copy std.armv6 to std.armv7, even though that duplicates a lot of stuff. More work needs to be done to sort out the duplication. Differential Revision: https://reviews.freebsd.org/D12027
2017-10-05 23:01:50 +00:00
include "std.armv7"
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
files "../allwinner/files.allwinner"
Add Allwinner UP SoC support to GENERIC on armv6 Relnotes: yes
2016-11-04 04:47:08 +00:00
files "../allwinner/files.allwinner_up"
files "../allwinner/a10/files.a10"
files "../allwinner/a13/files.a13"
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
files "../allwinner/a20/files.a20"
files "../allwinner/a31/files.a31"
ARM GENERIC: Add support for Allwinner A33 SoC
2017-01-04 03:37:00 +00:00
files "../allwinner/a33/files.a33"
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
files "../allwinner/a83t/files.a83t"
files "../allwinner/h3/files.h3"
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
files "../broadcom/bcm2835/files.bcm2836"
files "../broadcom/bcm2835/files.bcm283x"
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
files "../freescale/imx/files.imx6"
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
files "../mv/files.arm7"
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
files "../nvidia/tegra124/files.tegra124"
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
files "../qemu/files.qemu"
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
files "../ti/files.ti"
files "../ti/am335x/files.am335x"
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
files "../ti/omap4/files.omap4"
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
files "../xilinx/files.zynq7"
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add Allwinner UP SoC support to GENERIC on armv6 Relnotes: yes
2016-11-04 04:47:08 +00:00
options SOC_ALLWINNER_A10
options SOC_ALLWINNER_A13
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
options SOC_ALLWINNER_A20
options SOC_ALLWINNER_A31
options SOC_ALLWINNER_A31S
ARM GENERIC: Add support for Allwinner A33 SoC
2017-01-04 03:37:00 +00:00
options SOC_ALLWINNER_A33
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
options SOC_ALLWINNER_A83T
Allwinner: Add support for H2 Plus SoC H2+ SoC is a stripped down version of H3 without gigabit ethernet and 4K HDMI. Also add sun8i-h2-plus-orangepi-zero.dts to the build as we run on this board.
2017-06-24 16:41:26 +00:00
options SOC_ALLWINNER_H2PLUS
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
options SOC_ALLWINNER_H3
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
options SOC_BCM2836
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
options SOC_MV_ARMADA38X
options SOC_MV_ARMADAXP
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
options SOC_TI_AM335X
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
options SOC_OMAP4
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
options SCHED_ULE # ULE scheduler
options SMP # Enable multiple cores
options PLATFORM
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
options LINUX_BOOT_ABI
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# EXT_RESOURCES pseudo devices
options EXT_RESOURCES
device clk
device phy
device hwreset
nvmem: Add nvmem interface and helpers The nvmem interface helps provider of nvmem data to expose themselves to consumer. NVMEM is generally present on some embedded board in a form of eeprom or fuses. The nvmem api are helpers for consumer to read/write the cell data from a provider. Differential Revision: https://reviews.freebsd.org/D16419
2018-07-31 19:08:24 +00:00
device nvmem
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device regulator
if_awg: Use syscon prop if it exists The emac bindings that are landing in Linux 4.15 specify a syscon property on the emac node that point to /soc/syscon. Use this property if it's specified, but maintain backwards compatibility with the old method. The older method is still used for boards that we get .dtb from u-boot, such as pine64, that did not yet have stable emac bindings. Tested on: Banana Pi-M3 (a83t) Tested on: Pine64 (a64) Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D13296
2018-01-04 22:37:15 +00:00
device syscon
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add device cpufreq.
2016-10-23 19:02:19 +00:00
# CPU frequency control
device cpufreq
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# Interrupt controller
device gic
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
# PMU support (for CCNT).
device pmu
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# ARM Generic Timer
device generic_timer
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
device mpcore_timer
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# MMC/SD/SDIO Card slot support
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
device sdhci # SD controller
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device mmc # mmc/sd bus
device mmcsd # mmc/sd flash cards
# ATA controllers
device ahci # AHCI-compatible SATA controllers
#device ata # Legacy ATA/SATA controllers
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
# PCI
options NEW_PCIB
device pci
Previously there was a VIRT kernel to which I had added these options. With that gone they need to go into GENERIC now. Makes FreeBSD/arm usable on gem5 by default. Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D12566
2017-10-12 14:32:45 +00:00
device pci_host_generic
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
# PCI NICs
device re # RealTek 8139C+/8169/8169S/8110S
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# VirtIO
device virtio
device virtio_mmio
Previously there was a VIRT kernel to which I had added these options. With that gone they need to go into GENERIC now. Makes FreeBSD/arm usable on gem5 by default. Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D12566
2017-10-12 14:32:45 +00:00
device virtio_pci
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device virtio_blk
device vtnet
# Console and misc
device uart
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
device uart_ns8250
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device uart_snps
device pl011
device pty
device snp
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
device md # Memory "disks"
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device random # Entropy device
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device firmware # firmware assist module
Add external PLATFORM access on arm, and use it in the pl310 driver. This allows multiple instances of SoCs that use the pl310 driver to be built within the same kernel: * Add access to the platform_t object from outside platform.c * Use this with the pl310 driver There is a new platform_pl310 interface to replace the existing code. SoCs need to implement the init method, and if they have special requirements to write to the two registers we care about will also need to implement the write_ctrl and write_debug methods. Differential Revision: https://reviews.freebsd.org/D11546
2017-07-11 16:30:16 +00:00
device pl310 # PL310 L2 cache controller
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device psci
# I2C support
device iicbus
device iic
device twsi
allwinner: Add support for P2WI in RSB driver Push-Pull Two Wire interface is a almost compatible iic like bus used in sun6i SoC. It's only use is to communicate with the power management IC. Reviewed by: jmcneill MFC after: 1 week Relnotes: yes
2016-10-24 20:33:42 +00:00
device rsb # Allwinner Reduced Serial Bus
device p2wi # Allwinner Push-Pull Two Wire
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device axp209 # AXP209 Power Management Unit
device axp81x # AXP813/818 Power Management Unit
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
device bcm2835_bsc
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device fsliic # Freescale i2c/iic
Add the i2c RTC drivers found on various arm systems.
2017-07-30 00:25:29 +00:00
device icee # AT24Cxxx and compatible EEPROMs
Enable driver for SY8106A Buck Regulator.
2016-10-24 22:35:45 +00:00
device sy8106a # SY8106A Buck Regulator
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
device ti_i2c
device am335x_pmic # AM335x Power Management IC (TPC65217)
device am335x_rtc # RTC support (power management only)
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
device twl # TI TWLX0X0/TPS659x0 Power Management
device twl_vreg # twl voltage regulation
device twl_clks # twl external clocks
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add the i2c RTC drivers found on various arm systems.
2017-07-30 00:25:29 +00:00
# i2c RTCs
device ds1307 # Dallas DS1307 RTC and compatible
Add back the drivers for Dallas/Maxim ds13xx and Seiko S35390x now that they've been rewritten/fixed to not cause panics by doing i2c transfers before interrupts are available. PR: 221227
2017-08-14 00:12:14 +00:00
device ds13rtc # All Dallas/Maxim DS13xx RTCs
Add the i2c RTC drivers found on various arm systems.
2017-07-30 00:25:29 +00:00
device ds1672 # Dallas DS1672 RTC
device ds3231 # Dallas DS3231 RTC + temperature
device nxprtc # NXP RTCs: PCA/PFC212x PCA/PCF85xx
Add back the drivers for Dallas/Maxim ds13xx and Seiko S35390x now that they've been rewritten/fixed to not cause panics by doing i2c transfers before interrupts are available. PR: 221227
2017-08-14 00:12:14 +00:00
device s35390a # Seiko s3539x RTCs
Add the i2c RTC drivers found on various arm systems.
2017-07-30 00:25:29 +00:00
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# GPIO
device gpio
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
device gpiobacklight
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device gpioled
Add driver for GPIO controlled regulator. Reviewed by: gonzo, manu, mmel Differential Revision: https://reviews.freebsd.org/D8257
2016-10-15 20:04:14 +00:00
device gpioregulator
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add support for Allwinner Consumer IR interface. RX is supported now and the driver is using evdev framework. It was tested on Cubieboard2 (A20 SoC) using lirc with dfrobot's IR remote controller.
2016-10-27 04:26:33 +00:00
# EVDEV support
device evdev # input event device support
options EVDEV_SUPPORT # evdev support in legacy drivers
device uinput # install /dev/uinput cdev
device aw_cir
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
# SPI
device spibus
Add spigen to the ARMv6 GENERIC kernel
2016-11-20 18:21:42 +00:00
device spigen
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
device bcm2835_spi
Add the driver for the SPI controller on ARMADA38X. Tested on Clearfog (Pro) and SG-3100. Sponsored by: Rubicon Communications, LLC (Netgate)
2018-11-14 14:26:32 +00:00
device mv_spi
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
device ti_spi
# ADC support
device ti_adc
# Watchdog support
# If we don't enable the watchdog driver, the BealeBone could potentially
# reboot automatically because the boot loader might have enabled the
# watchdog.
device ti_wdt
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device imxwdt # Watchdog. WARNING: can't be disabled!!!
arm: allwinner: Makes more device optional MFC after: 2 weeks
2019-04-16 22:42:50 +00:00
device aw_wdog # Allwinner Watchdog
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device scbus # SCSI bus (required for ATA/SCSI)
device da # Direct Access (disks)
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
device cd # CD
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device pass # Passthrough device (direct ATA/SCSI access)
# USB support
options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
device usb
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
device uhci
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device ohci
device ehci
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
device xhci
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
device dwcotg # DWC OTG controller
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
device musb
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device axe # USB-Ethernet
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
device umass # Disks/Mass storage - Requires scbus and da
device uhid # "Human Interface Devices"
device ukbd # Allow keyboard like HIDs to control console
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
device firmware
Remove usfs(4) from arm kernel configs cfumass(4) is not usable if usfs(4) is loaded or compiled into the kernel. Remove usfs so that the user may kldload the USB mass storage target they prefer. PR: 218169 Reviewed by: trasz, hselasky (no objection) Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D10153
2017-03-28 00:57:33 +00:00
# Device mode support
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
device usb_template # Control of the gadget
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# Ethernet
device loop
device ether
Add support for Tegra to the armv6 GENERIC kernel. Reviewed by: imp, mmel Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8084
2016-09-30 10:20:53 +00:00
device vlan # 802.1Q VLAN support
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device bpf
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
device mii
device mdio
device etherswitch
device e6000sw
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
Add the cpsw, the NIC driver for ti/am335x, to GENERIC kernel. While here: - remove 'device mii' - included by miibus; - remove 'device smcphy' - included by miibus; - sorted the network drivers list; - added a comment about miibus based on amd64/GENERIC. Sponsored by: Rubicon Communications, LLC (Netgate)
2016-11-14 20:57:30 +00:00
# Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
device miibus
Add the cpsw, the NIC driver for ti/am335x, to GENERIC kernel. While here: - remove 'device mii' - included by miibus; - remove 'device smcphy' - included by miibus; - sorted the network drivers list; - added a comment about miibus based on amd64/GENERIC. Sponsored by: Rubicon Communications, LLC (Netgate)
2016-11-14 20:57:30 +00:00
device awg # 10/100/1000 integrated EMAC controller
device cpsw # TI Common Platform Ethernet Switch (CPSW)
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device cgem # Zynq-7000 gig ethernet device
Add the cpsw, the NIC driver for ti/am335x, to GENERIC kernel. While here: - remove 'device mii' - included by miibus; - remove 'device smcphy' - included by miibus; - sorted the network drivers list; - added a comment about miibus based on amd64/GENERIC. Sponsored by: Rubicon Communications, LLC (Netgate)
2016-11-14 20:57:30 +00:00
device dwc # 10/100/1000 integrated GMAC controller
device emac # 10/100 integrated EMAC controller
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device ffec # Freescale Fast Ethernet Controller
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
device neta # Marvell 10/100/1000 Network controller
Add the cpsw, the NIC driver for ti/am335x, to GENERIC kernel. While here: - remove 'device mii' - included by miibus; - remove 'device smcphy' - included by miibus; - sorted the network drivers list; - added a comment about miibus based on amd64/GENERIC. Sponsored by: Rubicon Communications, LLC (Netgate)
2016-11-14 20:57:30 +00:00
device smsc # SMSC LAN91C111
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# Sound support
device sound
# Framebuffer support
device vt
device kbdmux
device ums
device videomode
device hdmi
Add support for RPI2 to the armv6 GENERIC kernel.
2016-09-30 10:46:27 +00:00
device vchiq
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# Pinmux
device fdt_pinctrl
Add BeagleBone Black support to GENERIC on armv6. Reviewed by: mmel, imp Relnotes: yes Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
# TI Programmable Realtime Unit support
device ti_pruss
# Mailbox support
device ti_mbox
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
# DMA controller
Add i.MX6 and Xilinx to GENERIC. Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The Freescale sdma device has been renamed to fslsdma to mark it as a platform specific driver. Reviewed by: ian Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D11564
2017-09-24 09:33:08 +00:00
device fslsdma
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
device ti_sdma
arm: allwinner: Makes more device optional MFC after: 2 weeks
2019-04-16 22:42:50 +00:00
device a10_dmac
device a31_dmac
Resolv the remaining conflicting symbols between omap4 and am335x, and add omap4/pandaboard into the GENERIC kernel.
2016-11-19 01:51:56 +00:00
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# Extensible Firmware Interface
options EFI
Add Marvell ArmadaXP and Armada38X to GENERIC config Include source files and drivers for Marvell ArmadaXP and Armada38X in GENERIC kernel config. Submitted by: Michal Mazur <mkm@semihalf.com> Rafal Kozik <rk@semihalf.com> Reviewed by: manu Tested by: manu Obtained from: Semihalf Sponsored by: Stormshield
2018-05-03 01:23:42 +00:00
# Marvell Cryptographic Engine and Security Accelerator
device cesa
device crypto
device cryptodev
arm: allwinner: Makes more device optional MFC after: 2 weeks
2019-04-16 22:42:50 +00:00
# RTC
device imx6_snvs # IMX6 On-chip RTC
device aw_rtc # Allwinner On-chip RTC
# EFUSE
device aw_sid # Allwinner Secure ID EFUSE
# Thermal sensors
device aw_thermal # Allwinner Thermal Sensor Controller
Move device statements out of std.imx* and into kernel config files. In the armv4/5 world device statements in these files were common, but in the v6/7 world, other socs don't put device statements into those files, so this just brings imx5 and imx6 into line with the current conventions.
2018-07-08 21:09:52 +00:00
Add the start of a GENERIC armv6 kernel config. This supports the Allwinner SMP SoCs and qemu virt. Further SoCs can be supported if they support the PLATFORM, PLATFORM_SMP, and MULTIDELAY options. Tested by: manu Sponsored by: ABT Systems Ltd
2016-09-25 07:48:08 +00:00
# Flattened Device Tree
options FDT # Configure using FDT/DTB data
arm: dts: overlays: Remove the overlay module Move the DTSO variables in the main SoC dtb file Discussed with: ian
2018-04-27 21:15:51 +00:00
makeoptions MODULES_EXTRA="dtb/allwinner dtb/am335x dtb/imx6 dtb/nvidia dtb/rpi dtb/zynq dtb/omap4"
Reference in New Issue Copy Permalink