freebsd-dev/sys/dev/mii/dcphy.c

465 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Pseudo-driver for internal NWAY support on DEC 21143 and workalike
* controllers. Technically we're abusing the miibus code to handle
* media selection and NWAY support here since there is no MII
* interface. However the logical operations are roughly the same,
* and the alternative is to create a fake MII interface in the driver,
* which is harder to do.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/miidevs.h>
#include <machine/bus_pio.h>
#include <machine/bus_memio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <pci/pcivar.h>
#include <pci/if_dcreg.h>
#include "miibus_if.h"
#if !defined(lint)
static const char rcsid[] =
"$FreeBSD$";
#endif
#define DC_SETBIT(sc, reg, x) \
CSR_WRITE_4(sc, reg, \
CSR_READ_4(sc, reg) | x)
#define DC_CLRBIT(sc, reg, x) \
CSR_WRITE_4(sc, reg, \
CSR_READ_4(sc, reg) & ~x)
#define MIIF_AUTOTIMEOUT 0x0004
/*
* This is the subsystem ID for the built-in 21143 ethernet
* in several Compaq Presario systems. Apparently these are
* 10Mbps only, so we need to treat them specially.
*/
#define COMPAQ_PRESARIO_ID 0xb0bb0e11
2002-03-20 02:08:01 +00:00
static int dcphy_probe (device_t);
static int dcphy_attach (device_t);
static device_method_t dcphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, dcphy_probe),
DEVMETHOD(device_attach, dcphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{ 0, 0 }
};
static devclass_t dcphy_devclass;
static driver_t dcphy_driver = {
"dcphy",
dcphy_methods,
sizeof(struct mii_softc)
};
DRIVER_MODULE(dcphy, miibus, dcphy_driver, dcphy_devclass, 0, 0);
2002-03-20 02:08:01 +00:00
static int dcphy_service(struct mii_softc *, struct mii_data *, int);
static void dcphy_status(struct mii_softc *);
static void dcphy_reset(struct mii_softc *);
static int dcphy_auto(struct mii_softc *);
static int dcphy_probe(dev)
device_t dev;
{
struct mii_attach_args *ma;
ma = device_get_ivars(dev);
/*
* The dc driver will report the 21143 vendor and device
* ID to let us know that it wants us to attach.
*/
if (ma->mii_id1 != DC_VENDORID_DEC ||
ma->mii_id2 != DC_DEVICEID_21143)
return(ENXIO);
device_set_desc(dev, "Intel 21143 NWAY media interface");
return (0);
}
static int dcphy_attach(dev)
device_t dev;
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
struct dc_softc *dc_sc;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = dcphy_service;
sc->mii_pdata = mii;
sc->mii_flags |= MIIF_NOISOLATE;
mii->mii_instance++;
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
BMCR_ISO);
/*dcphy_reset(sc);*/
dc_sc = mii->mii_ifp->if_softc;
CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0);
CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0);
switch(pci_read_config(device_get_parent(sc->mii_dev),
DC_PCI_CSID, 4)) {
case COMPAQ_PRESARIO_ID:
/* Example of how to only allow 10Mbps modes. */
sc->mii_capabilities = BMSR_ANEG|BMSR_10TFDX|BMSR_10THDX;
break;
default:
if (dc_sc->dc_pmode == DC_PMODE_SIA) {
sc->mii_capabilities =
BMSR_ANEG|BMSR_10TFDX|BMSR_10THDX;
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP,
sc->mii_inst), BMCR_LOOP|BMCR_S100);
sc->mii_capabilities =
BMSR_ANEG|BMSR_100TXFDX|BMSR_100TXHDX|
BMSR_10TFDX|BMSR_10THDX;
}
break;
}
sc->mii_capabilities &= ma->mii_capmask;
device_printf(dev, " ");
mii_add_media(sc);
printf("\n");
#undef ADD
MIIBUS_MEDIAINIT(sc->mii_dev);
return(0);
}
static int
dcphy_service(sc, mii, cmd)
struct mii_softc *sc;
struct mii_data *mii;
int cmd;
{
struct dc_softc *dc_sc;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
int reg;
u_int32_t mode;
dc_sc = mii->mii_ifp->if_softc;
switch (cmd) {
case MII_POLLSTAT:
/*
* If we're not polling our PHY instance, just return.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
return (0);
}
break;
case MII_MEDIACHG:
/*
* If the media indicates a different PHY instance,
* isolate ourselves.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
return (0);
}
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
sc->mii_flags = 0;
mii->mii_media_active = IFM_NONE;
mode = CSR_READ_4(dc_sc, DC_NETCFG);
mode &= ~(DC_NETCFG_FULLDUPLEX|DC_NETCFG_PORTSEL|
DC_NETCFG_PCS|DC_NETCFG_SCRAMBLER|DC_NETCFG_SPEEDSEL);
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
/*dcphy_reset(sc);*/
(void) dcphy_auto(sc);
break;
case IFM_100_T4:
/*
* XXX Not supported as a manual setting right now.
*/
return (EINVAL);
case IFM_100_TX:
dcphy_reset(sc);
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
mode |= DC_NETCFG_PORTSEL|DC_NETCFG_PCS|
DC_NETCFG_SCRAMBLER;
if ((ife->ifm_media & IFM_GMASK) == IFM_FDX)
mode |= DC_NETCFG_FULLDUPLEX;
else
mode &= ~DC_NETCFG_FULLDUPLEX;
CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
break;
case IFM_10_T:
DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF);
if ((ife->ifm_media & IFM_GMASK) == IFM_FDX)
DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D);
else
DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F);
DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
mode &= ~DC_NETCFG_PORTSEL;
mode |= DC_NETCFG_SPEEDSEL;
if ((ife->ifm_media & IFM_GMASK) == IFM_FDX)
mode |= DC_NETCFG_FULLDUPLEX;
else
mode &= ~DC_NETCFG_FULLDUPLEX;
CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
break;
default:
return(EINVAL);
break;
}
break;
case MII_TICK:
/*
* If we're not currently selected, just return.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return (0);
/*
* Is the interface even up?
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return (0);
/*
* Only used for autonegotiation.
*/
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
break;
Work around an Intel 21143 chip bug. Rev 1.56 of if_dc.c removed calls to mii_pollstat() from the dc_tick() routine. dc_tick() is called regularly to detect link up and link down status, especially when autonegotiating. The expectation was that mii_tick() (which is still called from dc_tick()) would update status information automatically in all cases where it would be sensible to do so. Unfortunately, with authentic 21143 chips this is not the case, and the driver never successfully autonegotiates. This is because (despite what it says in the 21143 manual) the chip always claims that link is not present while the autonegotiation enable bit is set. Autonegotation takes place and succeeds, but the driver tests the link bits before it switches off the autonegotiation enable bit, and success is not recognised. The simplest solution is to call dcphy_status() more often for MII_TICK calls by dropping out of the switch statement instead of exiting when we are autonegotiating and link appears to not be present. When autonegotiation succeeds, dcphy_status() will note the speed and fdx/hdx state and turn off the autonegotiation enable bit. The next call to dcphy_status() will notice that link is present, and the dc driver code will be notified. Macronix chips also use this code, but implement link detection as described in the manual, and hence don't need this patch. However, tests on a Macronix 98715AEC-C show that it does not adversely affect them. This could be done better but is the minimal effective change, and most closely mimics what was happening prior to rev 1.56 of if_dc.c. (Actually I also deleted a small amount of unnecessary code while I was in the area.) Reviewed by: wpaul
2002-04-18 14:40:20 +00:00
reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
break;
/*
* Only retry autonegotiation every 5 seconds.
Work around an Intel 21143 chip bug. Rev 1.56 of if_dc.c removed calls to mii_pollstat() from the dc_tick() routine. dc_tick() is called regularly to detect link up and link down status, especially when autonegotiating. The expectation was that mii_tick() (which is still called from dc_tick()) would update status information automatically in all cases where it would be sensible to do so. Unfortunately, with authentic 21143 chips this is not the case, and the driver never successfully autonegotiates. This is because (despite what it says in the 21143 manual) the chip always claims that link is not present while the autonegotiation enable bit is set. Autonegotation takes place and succeeds, but the driver tests the link bits before it switches off the autonegotiation enable bit, and success is not recognised. The simplest solution is to call dcphy_status() more often for MII_TICK calls by dropping out of the switch statement instead of exiting when we are autonegotiating and link appears to not be present. When autonegotiation succeeds, dcphy_status() will note the speed and fdx/hdx state and turn off the autonegotiation enable bit. The next call to dcphy_status() will notice that link is present, and the dc driver code will be notified. Macronix chips also use this code, but implement link detection as described in the manual, and hence don't need this patch. However, tests on a Macronix 98715AEC-C show that it does not adversely affect them. This could be done better but is the minimal effective change, and most closely mimics what was happening prior to rev 1.56 of if_dc.c. (Actually I also deleted a small amount of unnecessary code while I was in the area.) Reviewed by: wpaul
2002-04-18 14:40:20 +00:00
*
* Otherwise, fall through to calling dcphy_status()
* since real Intel 21143 chips don't show valid link
* status until autonegotiation is switched off, and
* that only happens in dcphy_status(). Without this,
* successful autonegotation is never recognised on
* these chips.
*/
if (++sc->mii_ticks != 50)
Work around an Intel 21143 chip bug. Rev 1.56 of if_dc.c removed calls to mii_pollstat() from the dc_tick() routine. dc_tick() is called regularly to detect link up and link down status, especially when autonegotiating. The expectation was that mii_tick() (which is still called from dc_tick()) would update status information automatically in all cases where it would be sensible to do so. Unfortunately, with authentic 21143 chips this is not the case, and the driver never successfully autonegotiates. This is because (despite what it says in the 21143 manual) the chip always claims that link is not present while the autonegotiation enable bit is set. Autonegotation takes place and succeeds, but the driver tests the link bits before it switches off the autonegotiation enable bit, and success is not recognised. The simplest solution is to call dcphy_status() more often for MII_TICK calls by dropping out of the switch statement instead of exiting when we are autonegotiating and link appears to not be present. When autonegotiation succeeds, dcphy_status() will note the speed and fdx/hdx state and turn off the autonegotiation enable bit. The next call to dcphy_status() will notice that link is present, and the dc driver code will be notified. Macronix chips also use this code, but implement link detection as described in the manual, and hence don't need this patch. However, tests on a Macronix 98715AEC-C show that it does not adversely affect them. This could be done better but is the minimal effective change, and most closely mimics what was happening prior to rev 1.56 of if_dc.c. (Actually I also deleted a small amount of unnecessary code while I was in the area.) Reviewed by: wpaul
2002-04-18 14:40:20 +00:00
break;
sc->mii_ticks = 0;
dcphy_auto(sc);
break;
}
/* Update the media status. */
dcphy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
dcphy_status(sc)
struct mii_softc *sc;
{
struct mii_data *mii = sc->mii_pdata;
int reg, anlpar, tstat = 0;
struct dc_softc *dc_sc;
dc_sc = mii->mii_ifp->if_softc;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return;
Work around an Intel 21143 chip bug. Rev 1.56 of if_dc.c removed calls to mii_pollstat() from the dc_tick() routine. dc_tick() is called regularly to detect link up and link down status, especially when autonegotiating. The expectation was that mii_tick() (which is still called from dc_tick()) would update status information automatically in all cases where it would be sensible to do so. Unfortunately, with authentic 21143 chips this is not the case, and the driver never successfully autonegotiates. This is because (despite what it says in the 21143 manual) the chip always claims that link is not present while the autonegotiation enable bit is set. Autonegotation takes place and succeeds, but the driver tests the link bits before it switches off the autonegotiation enable bit, and success is not recognised. The simplest solution is to call dcphy_status() more often for MII_TICK calls by dropping out of the switch statement instead of exiting when we are autonegotiating and link appears to not be present. When autonegotiation succeeds, dcphy_status() will note the speed and fdx/hdx state and turn off the autonegotiation enable bit. The next call to dcphy_status() will notice that link is present, and the dc driver code will be notified. Macronix chips also use this code, but implement link detection as described in the manual, and hence don't need this patch. However, tests on a Macronix 98715AEC-C show that it does not adversely affect them. This could be done better but is the minimal effective change, and most closely mimics what was happening prior to rev 1.56 of if_dc.c. (Actually I also deleted a small amount of unnecessary code while I was in the area.) Reviewed by: wpaul
2002-04-18 14:40:20 +00:00
reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
mii->mii_media_status |= IFM_ACTIVE;
if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) {
/* Erg, still trying, I guess... */
tstat = CSR_READ_4(dc_sc, DC_10BTSTAT);
if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) {
if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) &&
(tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE)
goto skip;
mii->mii_media_active |= IFM_NONE;
return;
}
if (tstat & DC_TSTAT_LP_CAN_NWAY) {
anlpar = tstat >> 16;
if (anlpar & ANLPAR_T4 &&
sc->mii_capabilities & BMSR_100TXHDX)
mii->mii_media_active |= IFM_100_T4;
else if (anlpar & ANLPAR_TX_FD &&
sc->mii_capabilities & BMSR_100TXFDX)
mii->mii_media_active |= IFM_100_TX|IFM_FDX;
else if (anlpar & ANLPAR_TX &&
sc->mii_capabilities & BMSR_100TXHDX)
mii->mii_media_active |= IFM_100_TX;
else if (anlpar & ANLPAR_10_FD)
mii->mii_media_active |= IFM_10_T|IFM_FDX;
else if (anlpar & ANLPAR_10)
mii->mii_media_active |= IFM_10_T;
else
mii->mii_media_active |= IFM_NONE;
if (DC_IS_INTEL(dc_sc))
DC_CLRBIT(dc_sc, DC_10BTCTRL,
DC_TCTL_AUTONEGENBL);
return;
}
/*
* If the other side doesn't support NWAY, then the
* best we can do is determine if we have a 10Mbps or
* 100Mbps link. There's no way to know if the link
* is full or half duplex, so we default to half duplex
* and hope that the user is clever enough to manually
* change the media settings if we're wrong.
*/
if (!(reg & DC_TSTAT_LS100))
mii->mii_media_active |= IFM_100_TX;
else if (!(reg & DC_TSTAT_LS10))
mii->mii_media_active |= IFM_10_T;
else
mii->mii_media_active |= IFM_NONE;
if (DC_IS_INTEL(dc_sc))
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
return;
}
skip:
if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SPEEDSEL)
mii->mii_media_active |= IFM_10_T;
else
mii->mii_media_active |= IFM_100_TX;
if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX)
mii->mii_media_active |= IFM_FDX;
return;
}
static int
dcphy_auto(mii)
struct mii_softc *mii;
{
struct dc_softc *sc;
sc = mii->mii_pdata->mii_ifp->if_softc;
DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
if (mii->mii_capabilities & BMSR_100TXHDX)
CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF);
else
CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF);
DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE);
return(EJUSTRETURN);
}
static void
dcphy_reset(mii)
struct mii_softc *mii;
{
struct dc_softc *sc;
sc = mii->mii_pdata->mii_ifp->if_softc;
DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
DELAY(1000);
DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
return;
}