d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bbb1e07d65
freebsd-dev/sys/mips/include/cpuregs.h

646 lines
24 KiB
C
Raw Normal View History

FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* $NetBSD: cpuregs.h,v 1.70 2006/05/15 02:26:54 simonb Exp $ */
/*
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
2017-11-20 19:43:44 +00:00
* SPDX-License-Identifier: BSD-3-Clause
*
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Ralph Campbell and Rick Macklem.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)machConst.h 8.1 (Berkeley) 6/10/93
*
* machConst.h --
*
* Machine dependent constants.
*
* Copyright (C) 1989 Digital Equipment Corporation.
* Permission to use, copy, modify, and distribute this software and
* its documentation for any purpose and without fee is hereby granted,
* provided that the above copyright notice appears in all copies.
* Digital Equipment Corporation makes no representations about the
* suitability of this software for any purpose. It is provided "as is"
* without express or implied warranty.
*
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h,
* v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL)
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h,
* v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL)
* from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h,
* v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL)
*
* $FreeBSD$
*/
#ifndef _MIPS_CPUREGS_H_
#define _MIPS_CPUREGS_H_
Make cache coherency attributes definitions available in machine/vm.h on MIPS. Move definitions from cpuregs.h into the cca.h, and include cca.h into vm.h. This is required to make MIPS MD memattr definitions usable in userspace. Sponsored by: The FreeBSD Foundation, Mellanox Technologies MFC after: 1 week Differential revision: https://reviews.freebsd.org/D15583
2018-08-01 18:35:17 +00:00
#ifndef _KVM_MINIDUMP
#include <machine/cca.h>
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Address space.
* 32-bit mips CPUS partition their 32-bit address space into four segments:
*
* kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped
* kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped
* kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped
* kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped
*
* Caching of mapped addresses is controlled by bits in the TLB entry.
*/
MIPS n64 support - continued... 1. On n64, use XKPHYS to map page table pages instead of KSEG0. Maintain just one freepages list on n64. The changes are mainly to introduce MIPS_PHYS_TO_DIRECT(pa), MIPS_DIRECT_TO_PHYS(), which will use KSEG0 in 32 bit compilation and XKPHYS in 64 bit compilation. 2. Change macro based PMAP_LMEM_MAP1(), PMAP_LMEM_MAP2(), PMAP_LMEM_UNMAP() to inline functions. 3. Introduce MIPS_DIRECT_MAPPABLE(pa), which will further reduce the cases in which we will need to have a special case for 64 bit compilation. 4. Update CP0 hazard definitions for CPU_RMI - the cpu does not need any nops Reviewed by: neel
2010-08-18 12:52:21 +00:00
#define MIPS_KSEG0_LARGEST_PHYS (0x20000000)
#define MIPS_KSEG0_PHYS_MASK (0x1fffffff)
#define MIPS_XKPHYS_LARGEST_PHYS (0x10000000000) /* 40 bit PA */
#define MIPS_XKPHYS_PHYS_MASK (0x0ffffffffff)
Move KSEG address definitions from cpu.h to cpuregs.h with the other definitions, add some XKPHYS related definitions for n64. Reviewed by: imp
2010-07-12 07:24:40 +00:00
Define break value for ddb. Use int32/intptr casts for exception vector names. Define MIPS_SR_INT_MASK again Change MIPS_XKPHYS_CCA_* to MIPS_CCA_* since we can use them in many contexts Minor gratuitous whitespace churn
2010-07-13 17:24:30 +00:00
#ifndef LOCORE
o) Fix XKPHYS physical address extraction. Also define cache coherency attributes for XKPHYS. o) Make coprocessor 0 accessor function macros for register+selector registers take the full name so that e.g. (as done in this commit), prid selector 1 can be written through mips_wr_ebase() rather than mips_wr_prid1(). o) Allow for sign extension of 32-bit segment addresses. o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
#define MIPS_KUSEG_START 0x00000000
#define MIPS_KSEG0_START ((intptr_t)(int32_t)0x80000000)
#define MIPS_KSEG0_END ((intptr_t)(int32_t)0x9fffffff)
#define MIPS_KSEG1_START ((intptr_t)(int32_t)0xa0000000)
#define MIPS_KSEG1_END ((intptr_t)(int32_t)0xbfffffff)
#define MIPS_KSSEG_START ((intptr_t)(int32_t)0xc0000000)
#define MIPS_KSSEG_END ((intptr_t)(int32_t)0xdfffffff)
#define MIPS_KSEG3_START ((intptr_t)(int32_t)0xe0000000)
#define MIPS_KSEG3_END ((intptr_t)(int32_t)0xffffffff)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_KSEG2_START MIPS_KSSEG_START
#define MIPS_KSEG2_END MIPS_KSSEG_END
Define break value for ddb. Use int32/intptr casts for exception vector names. Define MIPS_SR_INT_MASK again Change MIPS_XKPHYS_CCA_* to MIPS_CCA_* since we can use them in many contexts Minor gratuitous whitespace churn
2010-07-13 17:24:30 +00:00
#endif
Move KSEG address definitions from cpu.h to cpuregs.h with the other definitions, add some XKPHYS related definitions for n64. Reviewed by: imp
2010-07-12 07:24:40 +00:00
#define MIPS_PHYS_TO_KSEG0(x) ((uintptr_t)(x) | MIPS_KSEG0_START)
#define MIPS_PHYS_TO_KSEG1(x) ((uintptr_t)(x) | MIPS_KSEG1_START)
MIPS n64 support - continued... 1. On n64, use XKPHYS to map page table pages instead of KSEG0. Maintain just one freepages list on n64. The changes are mainly to introduce MIPS_PHYS_TO_DIRECT(pa), MIPS_DIRECT_TO_PHYS(), which will use KSEG0 in 32 bit compilation and XKPHYS in 64 bit compilation. 2. Change macro based PMAP_LMEM_MAP1(), PMAP_LMEM_MAP2(), PMAP_LMEM_UNMAP() to inline functions. 3. Introduce MIPS_DIRECT_MAPPABLE(pa), which will further reduce the cases in which we will need to have a special case for 64 bit compilation. 4. Update CP0 hazard definitions for CPU_RMI - the cpu does not need any nops Reviewed by: neel
2010-08-18 12:52:21 +00:00
#define MIPS_KSEG0_TO_PHYS(x) ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK)
#define MIPS_KSEG1_TO_PHYS(x) ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK)
Move KSEG address definitions from cpu.h to cpuregs.h with the other definitions, add some XKPHYS related definitions for n64. Reviewed by: imp
2010-07-12 07:24:40 +00:00
#define MIPS_IS_KSEG0_ADDR(x) \
(((vm_offset_t)(x) >= MIPS_KSEG0_START) && \
((vm_offset_t)(x) <= MIPS_KSEG0_END))
#define MIPS_IS_KSEG1_ADDR(x) \
(((vm_offset_t)(x) >= MIPS_KSEG1_START) && \
((vm_offset_t)(x) <= MIPS_KSEG1_END))
#define MIPS_IS_VALID_PTR(x) (MIPS_IS_KSEG0_ADDR(x) || \
MIPS_IS_KSEG1_ADDR(x))
o) Fix XKPHYS physical address extraction. Also define cache coherency attributes for XKPHYS. o) Make coprocessor 0 accessor function macros for register+selector registers take the full name so that e.g. (as done in this commit), prid selector 1 can be written through mips_wr_ebase() rather than mips_wr_prid1(). o) Allow for sign extension of 32-bit segment addresses. o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_PHYS_TO_XKPHYS(cca,x) \
((0x2ULL << 62) | ((unsigned long long)(cca) << 59) | (x))
Move KSEG address definitions from cpu.h to cpuregs.h with the other definitions, add some XKPHYS related definitions for n64. Reviewed by: imp
2010-07-12 07:24:40 +00:00
#define MIPS_PHYS_TO_XKPHYS_CACHED(x) \
- Consolidate the the cache coherence attribute definitions in a single place. Adapted from Juli's changes to pte.h in the octeon branch: http://svn.freebsd.org/viewvc/base/user/jmallett/octeon/sys/mips/include/pte.h - Set the KX and UX bits in the status register for n64 kernels. Reviewed by: jmallett
2010-08-07 01:49:44 +00:00
((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_CACHED) << 59) | (x))
Move KSEG address definitions from cpu.h to cpuregs.h with the other definitions, add some XKPHYS related definitions for n64. Reviewed by: imp
2010-07-12 07:24:40 +00:00
#define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \
- Consolidate the the cache coherence attribute definitions in a single place. Adapted from Juli's changes to pte.h in the octeon branch: http://svn.freebsd.org/viewvc/base/user/jmallett/octeon/sys/mips/include/pte.h - Set the KX and UX bits in the status register for n64 kernels. Reviewed by: jmallett
2010-08-07 01:49:44 +00:00
((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_UNCACHED) << 59) | (x))
Move KSEG address definitions from cpu.h to cpuregs.h with the other definitions, add some XKPHYS related definitions for n64. Reviewed by: imp
2010-07-12 07:24:40 +00:00
MIPS n64 support - continued... 1. On n64, use XKPHYS to map page table pages instead of KSEG0. Maintain just one freepages list on n64. The changes are mainly to introduce MIPS_PHYS_TO_DIRECT(pa), MIPS_DIRECT_TO_PHYS(), which will use KSEG0 in 32 bit compilation and XKPHYS in 64 bit compilation. 2. Change macro based PMAP_LMEM_MAP1(), PMAP_LMEM_MAP2(), PMAP_LMEM_UNMAP() to inline functions. 3. Introduce MIPS_DIRECT_MAPPABLE(pa), which will further reduce the cases in which we will need to have a special case for 64 bit compilation. 4. Update CP0 hazard definitions for CPU_RMI - the cpu does not need any nops Reviewed by: neel
2010-08-18 12:52:21 +00:00
#define MIPS_XKPHYS_TO_PHYS(x) ((uintptr_t)(x) & MIPS_XKPHYS_PHYS_MASK)
o) Fix XKPHYS physical address extraction. Also define cache coherency attributes for XKPHYS. o) Make coprocessor 0 accessor function macros for register+selector registers take the full name so that e.g. (as done in this commit), prid selector 1 can be written through mips_wr_ebase() rather than mips_wr_prid1(). o) Allow for sign extension of 32-bit segment addresses. o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
MIPS n64 support - continued... 1. On n64, use XKPHYS to map page table pages instead of KSEG0. Maintain just one freepages list on n64. The changes are mainly to introduce MIPS_PHYS_TO_DIRECT(pa), MIPS_DIRECT_TO_PHYS(), which will use KSEG0 in 32 bit compilation and XKPHYS in 64 bit compilation. 2. Change macro based PMAP_LMEM_MAP1(), PMAP_LMEM_MAP2(), PMAP_LMEM_UNMAP() to inline functions. 3. Introduce MIPS_DIRECT_MAPPABLE(pa), which will further reduce the cases in which we will need to have a special case for 64 bit compilation. 4. Update CP0 hazard definitions for CPU_RMI - the cpu does not need any nops Reviewed by: neel
2010-08-18 12:52:21 +00:00
#define MIPS_XKPHYS_START 0x8000000000000000
#define MIPS_XKPHYS_END 0xbfffffffffffffff
o) Fix XKPHYS physical address extraction. Also define cache coherency attributes for XKPHYS. o) Make coprocessor 0 accessor function macros for register+selector registers take the full name so that e.g. (as done in this commit), prid selector 1 can be written through mips_wr_ebase() rather than mips_wr_prid1(). o) Allow for sign extension of 32-bit segment addresses. o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
#define MIPS_XUSEG_START 0x0000000000000000
#define MIPS_XUSEG_END 0x0000010000000000
#define MIPS_XKSEG_START 0xc000000000000000
#define MIPS_XKSEG_END 0xc00000ff80000000
- Add minidump support for FreeBSD/mips
2010-11-07 03:09:02 +00:00
#define MIPS_XKSEG_COMPAT32_START 0xffffffff80000000
#define MIPS_XKSEG_COMPAT32_END 0xffffffffffffffff
#define MIPS_XKSEG_TO_COMPAT32(va) ((va) & 0xffffffff)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
MIPS n64 support - continued... 1. On n64, use XKPHYS to map page table pages instead of KSEG0. Maintain just one freepages list on n64. The changes are mainly to introduce MIPS_PHYS_TO_DIRECT(pa), MIPS_DIRECT_TO_PHYS(), which will use KSEG0 in 32 bit compilation and XKPHYS in 64 bit compilation. 2. Change macro based PMAP_LMEM_MAP1(), PMAP_LMEM_MAP2(), PMAP_LMEM_UNMAP() to inline functions. 3. Introduce MIPS_DIRECT_MAPPABLE(pa), which will further reduce the cases in which we will need to have a special case for 64 bit compilation. 4. Update CP0 hazard definitions for CPU_RMI - the cpu does not need any nops Reviewed by: neel
2010-08-18 12:52:21 +00:00
#ifdef __mips_n64
#define MIPS_DIRECT_MAPPABLE(pa) 1
#define MIPS_PHYS_TO_DIRECT(pa) MIPS_PHYS_TO_XKPHYS_CACHED(pa)
#define MIPS_PHYS_TO_DIRECT_UNCACHED(pa) MIPS_PHYS_TO_XKPHYS_UNCACHED(pa)
#define MIPS_DIRECT_TO_PHYS(va) MIPS_XKPHYS_TO_PHYS(va)
#else
#define MIPS_DIRECT_MAPPABLE(pa) ((pa) < MIPS_KSEG0_LARGEST_PHYS)
#define MIPS_PHYS_TO_DIRECT(pa) MIPS_PHYS_TO_KSEG0(pa)
#define MIPS_PHYS_TO_DIRECT_UNCACHED(pa) MIPS_PHYS_TO_KSEG1(pa)
#define MIPS_DIRECT_TO_PHYS(va) MIPS_KSEG0_TO_PHYS(va)
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* CPU dependent mtc0 hazard hook */
o) Properly size caches and TLB on Octeon. o) Make COP0_SYNC do nothing on Octeon, which is fully interlocked. Submitted by: Bhanu Prakash (with modifications)
2011-03-16 08:22:29 +00:00
#if defined(CPU_CNMIPS) || defined(CPU_RMI)
#define COP0_SYNC
Fix COP0 hazards for XLR and XLP The XLR CPUs do not have any software visible hazards for COP0 operations. On XLP the hazard is a ehb, since it is mips64r2.
2011-11-18 09:30:24 +00:00
#elif defined(CPU_NLM)
#define COP0_SYNC .word 0xc0 /* ehb */
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
#elif defined(CPU_SB1)
#define COP0_SYNC ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop
Move MIPS32 Release 2 and Release 3 CPUs to use the EHB instruction for clearing hazards. This revision makes currently known MIPS32 Release 2 and Release 3 CPUs use the EHB instruction when clearing hazards. So far the MIPS 74K and MIPS1004K (somewhat) were already using the EHB. Now we add more r2 and r3 CPUs to this list. Also, for the cases of MIPS coherent processing systems (currently 1004K, 1074K, interAptiv and proAptiv) - define proper CCA attributes. Submitted by: Stanislav Galabov <sgalabov@gmail.com> Reviewed by: imp Differential Revision: https://reviews.freebsd.org/D5078
2016-02-02 16:00:42 +00:00
#elif defined(CPU_MIPS24K) || defined(CPU_MIPS34K) || \
defined(CPU_MIPS74K) || defined(CPU_MIPS1004K) || \
defined(CPU_MIPS1074K) || defined(CPU_INTERAPTIV) || \
defined(CPU_PROAPTIV)
/*
* According to MIPS32tm Architecture for Programmers, Vol.II, rev. 2.00:
* "As EHB becomes standard in MIPS implementations, the previous SSNOPs can be
* removed, leaving only the EHB".
* Also, all MIPS32 Release 2 implementations have the EHB instruction, which
* resolves all execution hazards. The same goes for MIPS32 Release 3.
*/
#define COP0_SYNC .word 0xc0 /* ehb */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#else
Fix a problem seen when a new process was returning to userland through fork_trampoline. This was caused because we were clearing the SR_INT_IE and setting SR_EXL bits of the status register at the same time. This meant that if an interrupt happened while this MTC0 was making its way through the pipeline the exception processing would see the status register with SR_EXL bit set. This in turn would mean that the COP_0_EXC_PC would not be updated so the return from exception would be to an incorrect address. It is easy to verify this fix by a program that forks in a loop and the child just exits: while (1) { pid_t pid = vfork(); if (pid == 0) _exit(0); if (pid != -1) waitpid(pid, NULL, 0); } Also remove two instances where we set SR_EXL bit gratuitously in exception.S. Approved by: imp (mentor)
2010-01-26 02:26:04 +00:00
/*
* Pick a reasonable default based on the "typical" spacing described in the
* "CP0 Hazards" chapter of MIPS Architecture Book Vol III.
*/
Add "better" MIPS24k and MIPS74k barriers. * the mips74k cores only need EHB (which is 'sll $0, $0, 3') here; NOPs don't actually work. * add EHB as the last NOP for the default barriers/hazards; that is "better" behaviour and should work on a wider variety of processors. This allows the existing (icky) TLB code to work, allowing the AR9344 SoC (mips74k) to actually get through kernel startup. Tested: * AR9344 SoC - (mips74k) * AR9331 SoC - (mips24k) TODO: * test on mips4k CPUs, just to be sure. * document that sll $0, $0, 3 is actually "EHB" and that it falls back to being a NOP for pre-mips32r1. * mips24k has an errata that we currently don't correctly explicitly state - ie, that after DERET/ERET, the only valid instruction is a NOP. Reviewed by: imp@ Approved by: re@ (gjb)
2013-10-09 00:27:12 +00:00
#define COP0_SYNC ssnop; ssnop; ssnop; ssnop; .word 0xc0;
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif
#define COP0_HAZARD_FPUENABLE nop; nop; nop; nop;
/*
* The bits in the cause register.
*
* Bits common to r3000 and r4000:
*
* MIPS_CR_BR_DELAY Exception happened in branch delay slot.
* MIPS_CR_COP_ERR Coprocessor error.
* MIPS_CR_IP Interrupt pending bits defined below.
* (same meaning as in CAUSE register).
* MIPS_CR_EXC_CODE The exception type (see exception codes below).
*
* Differences:
* r3k has 4 bits of execption type, r4k has 5 bits.
*/
#define MIPS_CR_BR_DELAY 0x80000000
#define MIPS_CR_COP_ERR 0x30000000
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CR_EXC_CODE 0x0000007C /* five bits */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_CR_IP 0x0000FF00
#define MIPS_CR_EXC_CODE_SHIFT 2
- Add better COP2 (crypto coprocessor) context handler for Octeon. Keep COP2 disabled and lazily allocate COP2 context structure in exception handler. Keep kernel and userland contexts separated.
2012-01-06 01:23:26 +00:00
#define MIPS_CR_COP_ERR_SHIFT 28
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* The bits in the status register. All bits are active when set to 1.
*
* R3000 status register fields:
* MIPS_SR_COP_USABILITY Control the usability of the four coprocessors.
* MIPS_SR_TS TLB shutdown.
*
* MIPS_SR_INT_IE Master (current) interrupt enable bit.
*
* Differences:
* r3k has cache control is via frobbing SR register bits, whereas the
* r4k cache control is via explicit instructions.
* r3k has a 3-entry stack of kernel/user bits, whereas the
* r4k has kernel/supervisor/user.
*/
#define MIPS_SR_COP_USABILITY 0xf0000000
#define MIPS_SR_COP_0_BIT 0x10000000
#define MIPS_SR_COP_1_BIT 0x20000000
#define MIPS_SR_COP_2_BIT 0x40000000
/* r4k and r3k differences, see below */
#define MIPS_SR_MX 0x01000000 /* MIPS64 */
#define MIPS_SR_PX 0x00800000 /* MIPS64 */
#define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */
#define MIPS_SR_TS 0x00200000
#define MIPS_SR_DE 0x00010000
#define MIPS_SR_INT_IE 0x00000001
/*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */
Define break value for ddb. Use int32/intptr casts for exception vector names. Define MIPS_SR_INT_MASK again Change MIPS_XKPHYS_CCA_* to MIPS_CCA_* since we can use them in many contexts Minor gratuitous whitespace churn
2010-07-13 17:24:30 +00:00
#define MIPS_SR_INT_MASK 0x0000ff00
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* R4000 status register bit definitons,
* where different from r2000/r3000.
*/
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_SR_XX 0x80000000
#define MIPS_SR_RP 0x08000000
#define MIPS_SR_FR 0x04000000
#define MIPS_SR_RE 0x02000000
#define MIPS_SR_DIAG_DL 0x01000000 /* QED 52xx */
#define MIPS_SR_DIAG_IL 0x00800000 /* QED 52xx */
#define MIPS_SR_SR 0x00100000
#define MIPS_SR_NMI 0x00080000 /* MIPS32/64 */
#define MIPS_SR_DIAG_CH 0x00040000
#define MIPS_SR_DIAG_CE 0x00020000
#define MIPS_SR_DIAG_PE 0x00010000
#define MIPS_SR_EIE 0x00010000 /* TX79/R5900 */
#define MIPS_SR_KX 0x00000080
#define MIPS_SR_SX 0x00000040
#define MIPS_SR_UX 0x00000020
#define MIPS_SR_KSU_MASK 0x00000018
#define MIPS_SR_KSU_USER 0x00000010
#define MIPS_SR_KSU_SUPER 0x00000008
#define MIPS_SR_KSU_KERNEL 0x00000000
#define MIPS_SR_ERL 0x00000004
#define MIPS_SR_EXL 0x00000002
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* The interrupt masks.
* If a bit in the mask is 1 then the interrupt is enabled (or pending).
*/
#define MIPS_INT_MASK 0xff00
#define MIPS_INT_MASK_5 0x8000
#define MIPS_INT_MASK_4 0x4000
#define MIPS_INT_MASK_3 0x2000
#define MIPS_INT_MASK_2 0x1000
#define MIPS_INT_MASK_1 0x0800
#define MIPS_INT_MASK_0 0x0400
#define MIPS_HARD_INT_MASK 0xfc00
#define MIPS_SOFT_INT_MASK_1 0x0200
#define MIPS_SOFT_INT_MASK_0 0x0100
/*
* The bits in the MIPS3 config register.
*
* bit 0..5: R/W, Bit 6..31: R/O
*/
/* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_K0_MASK 0x00000007
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* R/W Update on Store Conditional
* 0: Store Conditional uses coherency algorithm specified by TLB
* 1: Store Conditional uses cacheable coherent update on write
*/
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_CU 0x00000008
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_DB 0x00000010 /* Primary D-cache line size */
#define MIPS_CONFIG_IB 0x00000020 /* Primary I-cache line size */
#define MIPS_CONFIG_CACHE_L1_LSIZE(config, bit) \
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
(((config) & (bit)) ? 32 : 16)
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */
#define MIPS_CONFIG_DC_SHIFT 6
#define MIPS_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */
#define MIPS_CONFIG_IC_SHIFT 9
#define MIPS_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Cache size mode indication: available only on Vr41xx CPUs */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_CS 0x00001000
#define MIPS_CONFIG_C_4100BASE 0x0400 /* base is 2^10 if CS=1 */
#define MIPS_CONFIG_CACHE_SIZE(config, mask, base, shift) \
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
((base) << (((config) & (mask)) >> (shift)))
/* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_SE 0x00001000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Block ordering: 0: sequential, 1: sub-block */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_EB 0x00002000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* ECC mode - 0: ECC mode, 1: parity mode */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_EM 0x00004000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_BE 0x00008000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Dirty Shared coherency state - 0: enabled, 1: disabled */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_SM 0x00010000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Secondary Cache - 0: present, 1: not present */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_SC 0x00020000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_EW_MASK 0x000c0000
#define MIPS_CONFIG_EW_SHIFT 18
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_SW 0x00100000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_SS 0x00200000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Secondary Cache line size */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_SB_MASK 0x00c00000
#define MIPS_CONFIG_SB_SHIFT 22
#define MIPS_CONFIG_CACHE_L2_LSIZE(config) \
(0x10 << (((config) & MIPS_CONFIG_SB_MASK) >> MIPS_CONFIG_SB_SHIFT))
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Write back data rate */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_EP_MASK 0x0f000000
#define MIPS_CONFIG_EP_SHIFT 24
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* System clock ratio - this value is CPU dependent */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_EC_MASK 0x70000000
#define MIPS_CONFIG_EC_SHIFT 28
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* Master-Checker Mode - 1: enabled */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_CONFIG_CM 0x80000000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* The bits in the MIPS4 config register.
*/
/*
* Location of exception vectors.
*
* Common vectors: reset and UTLB miss.
*/
Define break value for ddb. Use int32/intptr casts for exception vector names. Define MIPS_SR_INT_MASK again Change MIPS_XKPHYS_CCA_* to MIPS_CCA_* since we can use them in many contexts Minor gratuitous whitespace churn
2010-07-13 17:24:30 +00:00
#define MIPS_RESET_EXC_VEC ((intptr_t)(int32_t)0xBFC00000)
#define MIPS_UTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000000)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* MIPS-III exception vectors
*/
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_XTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000080)
#define MIPS_CACHE_ERR_EXC_VEC ((intptr_t)(int32_t)0x80000100)
#define MIPS_GEN_EXC_VEC ((intptr_t)(int32_t)0x80000180)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector.
*/
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_INTR_EXC_VEC 0x80000200
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Coprocessor 0 registers:
*
* v--- width for mips I,III,32,64
* (3=32bit, 6=64bit, i=impl dep)
* 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index.
* 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random.
* 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low.
* 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended.
* 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context.
[mips] add support for using the MIPS user register for TLS data. This work, originally from Stacey Son, uses the MIPS UserReg for reading the TLS data, and will fall back to the normal syscall path when it isn't supported. This code dynamically patches cpu_switch() to bypass the UserReg instruction so to avoid generating a machine exception. Thanks to sson for the original work, and to Dan Nelson for bringing it to date and testing it on MIPS32 with me. Tested: * mips64 (sson) * mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support * mips24k (adrian) - AR9331 SoC, no UserReg support Obtained from: sson, dnelson_1901@yahoo.com
2016-08-07 01:29:55 +00:00
* 4/2 MIPS_COP_0_USERLOCAL ..36 UserLocal.
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register.
* 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number.
[mips] add support for using the MIPS user register for TLS data. This work, originally from Stacey Son, uses the MIPS UserReg for reading the TLS data, and will fall back to the normal syscall path when it isn't supported. This code dynamically patches cpu_switch() to bypass the UserReg instruction so to avoid generating a machine exception. Thanks to sson for the original work, and to Dan Nelson for bringing it to date and testing it on MIPS32 with me. Tested: * mips64 (sson) * mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support * mips24k (adrian) - AR9331 SoC, no UserReg support Obtained from: sson, dnelson_1901@yahoo.com
2016-08-07 01:29:55 +00:00
* 7 MIPS_COP_0_HWRENA ..33 rdHWR Enable.
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address.
* 9 MIPS_COP_0_COUNT .333 Count register.
* 10 MIPS_COP_0_TLB_HI 3636 TLB entry high.
* 11 MIPS_COP_0_COMPARE .333 Compare (against Count).
* 12 MIPS_COP_0_STATUS 3333 Status register.
Add MIPS32/64 Rev2 CP0 intctl register definitions. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D12300
2017-09-15 19:56:21 +00:00
* 12/1 MIPS_COP_0_INTCTL ..33 Interrupt setup (MIPS32/64 r2).
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* 13 MIPS_COP_0_CAUSE 3333 Exception cause register.
* 14 MIPS_COP_0_EXC_PC 3636 Exception PC.
* 15 MIPS_COP_0_PRID 3333 Processor revision identifier.
* 16 MIPS_COP_0_CONFIG 3333 Configuration register.
* 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1.
* 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2.
* 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3.
o) Properly size caches and TLB on Octeon. o) Make COP0_SYNC do nothing on Octeon, which is fully interlocked. Submitted by: Bhanu Prakash (with modifications)
2011-03-16 08:22:29 +00:00
* 16/4 MIPS_COP_0_CONFIG4 ..33 Configuration register 4.
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
* 17 MIPS_COP_0_LLADDR .336 Load Linked Address.
* 18 MIPS_COP_0_WATCH_LO .336 WatchLo register.
* 19 MIPS_COP_0_WATCH_HI .333 WatchHi register.
* 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register.
* 23 MIPS_COP_0_DEBUG .... Debug JTAG register.
* 24 MIPS_COP_0_DEPC .... DEPC JTAG register.
* 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register.
* 26 MIPS_COP_0_ECC .3ii ECC / Error Control register.
* 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register.
* 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr).
* 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr).
* 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data).
* 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data).
* 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr).
* 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr).
* 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data).
* 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data).
* 30 MIPS_COP_0_ERROR_PC .636 Error EPC register.
* 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register.
*/
/* Deal with inclusion from an assembly file. */
#if defined(_LOCORE) || defined(LOCORE)
#define _(n) $n
#else
#define _(n) n
#endif
#define MIPS_COP_0_TLB_INDEX _(0)
#define MIPS_COP_0_TLB_RANDOM _(1)
/* Name and meaning of TLB bits for $2 differ on r3k and r4k. */
#define MIPS_COP_0_TLB_CONTEXT _(4)
/* $5 and $6 new with MIPS-III */
#define MIPS_COP_0_BAD_VADDR _(8)
#define MIPS_COP_0_TLB_HI _(10)
#define MIPS_COP_0_STATUS _(12)
#define MIPS_COP_0_CAUSE _(13)
#define MIPS_COP_0_EXC_PC _(14)
#define MIPS_COP_0_PRID _(15)
/* MIPS-III */
#define MIPS_COP_0_TLB_LO0 _(2)
#define MIPS_COP_0_TLB_LO1 _(3)
#define MIPS_COP_0_TLB_PG_MASK _(5)
#define MIPS_COP_0_TLB_WIRED _(6)
#define MIPS_COP_0_COUNT _(9)
#define MIPS_COP_0_COMPARE _(11)
Add Ingenic XBurst coprocessor 0 extra bits. Submitted by: kan Sponsored by: DARPA, AFRL
2016-11-19 15:38:13 +00:00
#ifdef CPU_XBURST
#define MIPS_COP_0_XBURST_C12 _(12)
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_COP_0_CONFIG _(16)
#define MIPS_COP_0_LLADDR _(17)
#define MIPS_COP_0_WATCH_LO _(18)
#define MIPS_COP_0_WATCH_HI _(19)
#define MIPS_COP_0_TLB_XCONTEXT _(20)
Add Ingenic XBurst coprocessor 0 extra bits. Submitted by: kan Sponsored by: DARPA, AFRL
2016-11-19 15:38:13 +00:00
#ifdef CPU_XBURST
#define MIPS_COP_0_XBURST_MBOX _(20)
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_COP_0_ECC _(26)
#define MIPS_COP_0_CACHE_ERR _(27)
#define MIPS_COP_0_TAG_LO _(28)
#define MIPS_COP_0_TAG_HI _(29)
#define MIPS_COP_0_ERROR_PC _(30)
/* MIPS32/64 */
[mips] add support for using the MIPS user register for TLS data. This work, originally from Stacey Son, uses the MIPS UserReg for reading the TLS data, and will fall back to the normal syscall path when it isn't supported. This code dynamically patches cpu_switch() to bypass the UserReg instruction so to avoid generating a machine exception. Thanks to sson for the original work, and to Dan Nelson for bringing it to date and testing it on MIPS32 with me. Tested: * mips64 (sson) * mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support * mips24k (adrian) - AR9331 SoC, no UserReg support Obtained from: sson, dnelson_1901@yahoo.com
2016-08-07 01:29:55 +00:00
#define MIPS_COP_0_USERLOCAL _(4) /* sel 2 is userlevel register */
#define MIPS_COP_0_HWRENA _(7)
Add MIPS32/64 Rev2 CP0 intctl register definitions. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D12300
2017-09-15 19:56:21 +00:00
#define MIPS_COP_0_INTCTL _(12)
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_COP_0_DEBUG _(23)
#define MIPS_COP_0_DEPC _(24)
#define MIPS_COP_0_PERFCNT _(25)
#define MIPS_COP_0_DATA_LO _(28)
#define MIPS_COP_0_DATA_HI _(29)
#define MIPS_COP_0_DESAVE _(31)
/* MIPS32 Config register definitions */
#define MIPS_MMU_NONE 0x00 /* No MMU present */
#define MIPS_MMU_TLB 0x01 /* Standard TLB */
#define MIPS_MMU_BAT 0x02 /* Standard BAT */
#define MIPS_MMU_FIXED 0x03 /* Standard fixed mapping */
Add MIPS32/64 Rev2 CP0 intctl register definitions. Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D12300
2017-09-15 19:56:21 +00:00
/*
* IntCtl Register Fields
*/
#define MIPS_INTCTL_IPTI_MASK 0xE0000000 /* bits 31..29 timer intr # */
#define MIPS_INTCTL_IPTI_SHIFT 29
#define MIPS_INTCTL_IPPCI_MASK 0x1C000000 /* bits 26..29 perf counter intr # */
#define MIPS_INTCTL_IPPCI_SHIFT 26
#define MIPS_INTCTL_VS_MASK 0x000001F0 /* bits 5..9 vector spacing */
#define MIPS_INTCTL_VS_SHIFT 4
[mips] add support for using the MIPS user register for TLS data. This work, originally from Stacey Son, uses the MIPS UserReg for reading the TLS data, and will fall back to the normal syscall path when it isn't supported. This code dynamically patches cpu_switch() to bypass the UserReg instruction so to avoid generating a machine exception. Thanks to sson for the original work, and to Dan Nelson for bringing it to date and testing it on MIPS32 with me. Tested: * mips64 (sson) * mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support * mips24k (adrian) - AR9331 SoC, no UserReg support Obtained from: sson, dnelson_1901@yahoo.com
2016-08-07 01:29:55 +00:00
/*
* Config Register Fields
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.39)
*/
#define MIPS_CONFIG0_M 0x80000000 /* Flag: Config1 is present. */
#define MIPS_CONFIG0_MT_MASK 0x00000380 /* bits 9..7 MMU Type */
#define MIPS_CONFIG0_MT_SHIFT 7
#define MIPS_CONFIG0_BE 0x00008000 /* data is big-endian */
#define MIPS_CONFIG0_VI 0x00000008 /* inst cache is virtual */
/*
* Config1 Register Fields
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9-1)
*/
#define MIPS_CONFIG1_M 0x80000000 /* Flag: Config2 is present. */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_CONFIG1_TLBSZ_MASK 0x7E000000 /* bits 30..25 # tlb entries minus one */
#define MIPS_CONFIG1_TLBSZ_SHIFT 25
Make the ddb command "show tlb" SMP friendly. It now accepts an argument to dump out the tlb of a particular cpu.
2010-03-12 03:49:17 +00:00
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_CONFIG1_IS_MASK 0x01C00000 /* bits 24..22 icache sets per way */
#define MIPS_CONFIG1_IS_SHIFT 22
#define MIPS_CONFIG1_IL_MASK 0x00380000 /* bits 21..19 icache line size */
#define MIPS_CONFIG1_IL_SHIFT 19
#define MIPS_CONFIG1_IA_MASK 0x00070000 /* bits 18..16 icache associativity */
#define MIPS_CONFIG1_IA_SHIFT 16
#define MIPS_CONFIG1_DS_MASK 0x0000E000 /* bits 15..13 dcache sets per way */
#define MIPS_CONFIG1_DS_SHIFT 13
#define MIPS_CONFIG1_DL_MASK 0x00001C00 /* bits 12..10 dcache line size */
#define MIPS_CONFIG1_DL_SHIFT 10
#define MIPS_CONFIG1_DA_MASK 0x00000380 /* bits 9.. 7 dcache associativity */
#define MIPS_CONFIG1_DA_SHIFT 7
#define MIPS_CONFIG1_LOWBITS 0x0000007F
#define MIPS_CONFIG1_C2 0x00000040 /* Coprocessor 2 implemented */
#define MIPS_CONFIG1_MD 0x00000020 /* MDMX ASE implemented (MIPS64) */
#define MIPS_CONFIG1_PC 0x00000010 /* Performance counters implemented */
#define MIPS_CONFIG1_WR 0x00000008 /* Watch registers implemented */
#define MIPS_CONFIG1_CA 0x00000004 /* MIPS16e ISA implemented */
#define MIPS_CONFIG1_EP 0x00000002 /* EJTAG implemented */
#define MIPS_CONFIG1_FP 0x00000001 /* FPU implemented */
Add L2-cache writeback/flush operations. Supported 32,128-byte line-size, else ignored. Cavium Networks also ignored as it has non-standard config registers. Obtained from: NetBSD Sponsored by: DARPA, AFRL
2014-11-20 17:06:41 +00:00
#define MIPS_CONFIG2_SA_SHIFT 0 /* Secondary cache associativity */
#define MIPS_CONFIG2_SA_MASK 0xf
#define MIPS_CONFIG2_SL_SHIFT 4 /* Secondary cache line size */
#define MIPS_CONFIG2_SL_MASK 0xf
#define MIPS_CONFIG2_SS_SHIFT 8 /* Secondary cache sets per way */
#define MIPS_CONFIG2_SS_MASK 0xf
Begin the initial support for the mips1004kc core. * add build option; * add initial coherence manager config register bits; * use the right hazard instruction (ehb); * add page attributes. Tested: * MT7621A SoC (not yet in-tree) Submitted by: Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 15:52:21 +00:00
#define MIPS_CONFIG3_CMGCR_MASK (1 << 29) /* Coherence manager present */
[mips] add support for using the MIPS user register for TLS data. This work, originally from Stacey Son, uses the MIPS UserReg for reading the TLS data, and will fall back to the normal syscall path when it isn't supported. This code dynamically patches cpu_switch() to bypass the UserReg instruction so to avoid generating a machine exception. Thanks to sson for the original work, and to Dan Nelson for bringing it to date and testing it on MIPS32 with me. Tested: * mips64 (sson) * mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support * mips24k (adrian) - AR9331 SoC, no UserReg support Obtained from: sson, dnelson_1901@yahoo.com
2016-08-07 01:29:55 +00:00
/*
* Config2 Register Fields
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.40)
*/
#define MIPS_CONFIG2_M 0x80000000 /* Flag: Config3 is present. */
/*
* Config3 Register Fields
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.41)
*/
#define MIPS_CONFIG3_M 0x80000000 /* Flag: Config4 is present */
#define MIPS_CONFIG3_ULR 0x00002000 /* UserLocal reg implemented */
o) Properly size caches and TLB on Octeon. o) Make COP0_SYNC do nothing on Octeon, which is fully interlocked. Submitted by: Bhanu Prakash (with modifications)
2011-03-16 08:22:29 +00:00
#define MIPS_CONFIG4_MMUSIZEEXT 0x000000FF /* bits 7.. 0 MMU Size Extension */
#define MIPS_CONFIG4_MMUEXTDEF 0x0000C000 /* bits 15.14 MMU Extension Definition */
#define MIPS_CONFIG4_MMUEXTDEF_MMUSIZEEXT 0x00004000 /* This values denotes CONFIG4 bits */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Values for the code field in a break instruction.
*/
#define MIPS_BREAK_INSTR 0x0000000d
#define MIPS_BREAK_VAL_MASK 0x03ff0000
#define MIPS_BREAK_VAL_SHIFT 16
#define MIPS_BREAK_KDB_VAL 512
#define MIPS_BREAK_SSTEP_VAL 513
#define MIPS_BREAK_BRKPT_VAL 514
#define MIPS_BREAK_SOVER_VAL 515
Define break value for ddb. Use int32/intptr casts for exception vector names. Define MIPS_SR_INT_MASK again Change MIPS_XKPHYS_CCA_* to MIPS_CCA_* since we can use them in many contexts Minor gratuitous whitespace churn
2010-07-13 17:24:30 +00:00
#define MIPS_BREAK_DDB_VAL 516
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \
(MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT))
#define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \
(MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT))
#define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \
(MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT))
#define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \
(MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT))
Define break value for ddb. Use int32/intptr casts for exception vector names. Define MIPS_SR_INT_MASK again Change MIPS_XKPHYS_CCA_* to MIPS_CCA_* since we can use them in many contexts Minor gratuitous whitespace churn
2010-07-13 17:24:30 +00:00
#define MIPS_BREAK_DDB (MIPS_BREAK_INSTR | \
(MIPS_BREAK_DDB_VAL << MIPS_BREAK_VAL_SHIFT))
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Mininum and maximum cache sizes.
*/
#define MIPS_MIN_CACHE_SIZE (16 * 1024)
#define MIPS_MAX_CACHE_SIZE (256 * 1024)
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* The floating point version and status registers.
*/
#define MIPS_FPU_ID $0
#define MIPS_FPU_CSR $31
/*
* The floating point coprocessor status register bits.
*/
#define MIPS_FPU_ROUNDING_BITS 0x00000003
#define MIPS_FPU_ROUND_RN 0x00000000
#define MIPS_FPU_ROUND_RZ 0x00000001
#define MIPS_FPU_ROUND_RP 0x00000002
#define MIPS_FPU_ROUND_RM 0x00000003
#define MIPS_FPU_STICKY_BITS 0x0000007c
#define MIPS_FPU_STICKY_INEXACT 0x00000004
#define MIPS_FPU_STICKY_UNDERFLOW 0x00000008
#define MIPS_FPU_STICKY_OVERFLOW 0x00000010
#define MIPS_FPU_STICKY_DIV0 0x00000020
#define MIPS_FPU_STICKY_INVALID 0x00000040
#define MIPS_FPU_ENABLE_BITS 0x00000f80
#define MIPS_FPU_ENABLE_INEXACT 0x00000080
#define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100
#define MIPS_FPU_ENABLE_OVERFLOW 0x00000200
#define MIPS_FPU_ENABLE_DIV0 0x00000400
#define MIPS_FPU_ENABLE_INVALID 0x00000800
#define MIPS_FPU_EXCEPTION_BITS 0x0003f000
#define MIPS_FPU_EXCEPTION_INEXACT 0x00001000
#define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000
#define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000
#define MIPS_FPU_EXCEPTION_DIV0 0x00008000
#define MIPS_FPU_EXCEPTION_INVALID 0x00010000
#define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000
#define MIPS_FPU_COND_BIT 0x00800000
#define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */
At the risk of reducing source compatibility with old NetBSD and Sprite: o) Get rid of some unused macros related to features we don't intend to provide. o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to support anything that predartes MIPS-III. o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being used already. o) Eliminate a duplicate and mostly-unused set of exception vector macros. There's still considerable duplication and lots more obsolete in our headers, but this reduces one of the larger files to a size where one could reckon about the correctness of its contents with a mere few hours of contemplation. There is, of course, a question of whether we need definitions for fields, registers and configurations that we are unlikely to ever use or implement, even if they're not obsolete since 1991. FreeBSD is not a processor reference manual, and things that aren't used may be wrong, or may be duplicated because nobody could possibly actually know whether they're already defined.
2012-03-06 19:01:32 +00:00
#define MIPS_FPC_MBZ_BITS 0xfe7c0000
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Constants to determine if have a floating point instruction.
*/
#define MIPS_OPCODE_SHIFT 26
#define MIPS_OPCODE_C1 0x11
Begin the initial support for the mips1004kc core. * add build option; * add initial coherence manager config register bits; * use the right hazard instruction (ehb); * add page attributes. Tested: * MT7621A SoC (not yet in-tree) Submitted by: Stanislav Galabov <sgalabov@gmail.com>
2015-12-24 15:52:21 +00:00
/* Coherence manager constants */
#define MIPS_CMGCRB_BASE 11
#define MIPS_CMGCRF_BASE (~((1 << MIPS_CMGCRB_BASE) - 1))
[mips] add support for using the MIPS user register for TLS data. This work, originally from Stacey Son, uses the MIPS UserReg for reading the TLS data, and will fall back to the normal syscall path when it isn't supported. This code dynamically patches cpu_switch() to bypass the UserReg instruction so to avoid generating a machine exception. Thanks to sson for the original work, and to Dan Nelson for bringing it to date and testing it on MIPS32 with me. Tested: * mips64 (sson) * mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support * mips24k (adrian) - AR9331 SoC, no UserReg support Obtained from: sson, dnelson_1901@yahoo.com
2016-08-07 01:29:55 +00:00
/*
* Bits defined for for the HWREna (CP0 register 7, select 0).
*/
#define MIPS_HWRENA_CPUNUM (1<<0) /* CPU number program is running on */
#define MIPS_HWRENA_SYNCI_STEP (1<<1) /* Address step sized used with SYNCI */
#define MIPS_HWRENA_CC (1<<2) /* Hi Res cycle counter */
#define MIPS_HWRENA_CCRES (1<<3) /* Cycle counter resolution */
#define MIPS_HWRENA_UL (1<<29) /* UserLocal Register */
#define MIPS_HWRENA_IMPL30 (1<<30) /* Implementation-dependent 30 */
#define MIPS_HWRENA_IMPL31 (1<<31) /* Implementation-dependent 31 */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif /* _MIPS_CPUREGS_H_ */
Reference in New Issue Copy Permalink