freebsd-dev/etc/network.subr

1806 lines
37 KiB
Plaintext
Raw Normal View History

#
# Copyright (c) 2003 The FreeBSD Project. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
1999-08-27 23:37:10 +00:00
# $FreeBSD$
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
IFCONFIG_CMD="/sbin/ifconfig"
: ${netif_ipexpand_max:=2048}
#
# Subroutines commonly used from network startup scripts.
# Requires that rc.conf be loaded first.
#
2008-04-20 20:37:21 +00:00
# ifn_start ifn
# Bring up and configure an interface. If some configuration is
# applied, print the interface configuration.
2008-04-20 20:37:21 +00:00
#
ifn_start()
{
local ifn cfg
ifn="$1"
cfg=1
[ -z "$ifn" ] && err 1 "ifn_start called without an interface"
ifscript_up ${ifn} && cfg=0
ifconfig_up ${ifn} && cfg=0
if ! noafif $ifn; then
afexists inet && ipv4_up ${ifn} && cfg=0
afexists inet6 && ipv6_up ${ifn} && cfg=0
fi
childif_create ${ifn} && cfg=0
2008-04-20 20:37:21 +00:00
return $cfg
}
# ifn_stop ifn
# Shutdown and de-configure an interface. If action is taken,
# print the interface name.
2008-04-20 20:37:21 +00:00
#
ifn_stop()
{
local ifn cfg
ifn="$1"
cfg=1
[ -z "$ifn" ] && err 1 "ifn_stop called without an interface"
2008-04-20 20:37:21 +00:00
if ! noafif $ifn; then
afexists inet6 && ipv6_down ${ifn} && cfg=0
afexists inet && ipv4_down ${ifn} && cfg=0
fi
2008-04-20 20:37:21 +00:00
ifconfig_down ${ifn} && cfg=0
ifscript_down ${ifn} && cfg=0
childif_destroy ${ifn} && cfg=0
2008-04-20 20:37:21 +00:00
return $cfg
}
# ifn_vnetup ifn
# Move ifn to the specified vnet jail.
#
ifn_vnetup()
{
ifn_vnet0 $1 vnet
}
# ifn_vnetdown ifn
# Reclaim ifn from the specified vnet jail.
#
ifn_vnetdown()
{
ifn_vnet0 $1 -vnet
}
# ifn_vnet0 ifn action
# Helper function for ifn_vnetup and ifn_vnetdown.
#
ifn_vnet0()
{
local _ifn _cfg _action _vnet
_ifn="$1"
_action="$2"
_cfg=1
if _vnet=$(vnetif $_ifn); then
${IFCONFIG_CMD} $_ifn $_action $_vnet && _cfg=0
fi
return $_cfg
}
# ifconfig_up if
# Evaluate ifconfig(8) arguments for interface $if and
# run ifconfig(8) with those arguments. It returns 0 if
# arguments were found and executed or 1 if the interface
# had no arguments. Pseudo arguments DHCP and WPA are handled
# here.
#
ifconfig_up()
{
local _cfg _ipv6_opts ifconfig_args
_cfg=1
# Make sure lo0 always comes up.
if [ "$1" = "lo0" ]; then
_cfg=0
fi
# inet6 specific
if ! noafif $1 && afexists inet6; then
if checkyesno ipv6_activate_all_interfaces; then
_ipv6_opts="-ifdisabled"
elif [ "$1" != "lo0" ]; then
_ipv6_opts="ifdisabled"
fi
# backward compatibility: $ipv6_enable
case $ipv6_enable in
[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
case $1 in
bridge[0-9]*)
# No accept_rtadv by default on if_bridge(4)
# to avoid a conflict with the member
# interfaces.
;;
*)
if ! checkyesno ipv6_gateway_enable; then
_ipv6_opts="${_ipv6_opts} accept_rtadv"
fi
;;
esac
;;
esac
case $ipv6_cpe_wanif in
$1)
_ipv6_opts="${_ipv6_opts} -no_radr accept_rtadv"
;;
esac
if [ -n "${_ipv6_opts}" ]; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 inet6 ${_ipv6_opts}
fi
fi
# ifconfig_IF
ifconfig_args=`ifconfig_getargs $1`
if [ -n "${ifconfig_args}" ]; then
eval ${IFCONFIG_CMD} $1 ${ifconfig_args}
_cfg=0
fi
# inet6 specific
if ! noafif $1 && afexists inet6; then
# ifconfig_IF_ipv6
ifconfig_args=`ifconfig_getargs $1 ipv6`
if [ -n "${ifconfig_args}" ]; then
# backward compatibility: inet6 keyword
case "${ifconfig_args}" in
:*|[0-9a-fA-F]*:*)
warn "\$ifconfig_$1_ipv6 needs leading" \
"\"inet6\" keyword for an IPv6 address."
ifconfig_args="inet6 ${ifconfig_args}"
;;
esac
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 inet6 -ifdisabled
eval ${IFCONFIG_CMD} $1 ${ifconfig_args}
_cfg=0
fi
# $ipv6_prefix_IF will be handled in
# ipv6_prefix_hostid_addr_common().
ifconfig_args=`get_if_var $1 ipv6_prefix_IF`
if [ -n "${ifconfig_args}" ]; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 inet6 -ifdisabled
_cfg=0
fi
2012-01-07 16:10:32 +00:00
# backward compatibility: $ipv6_ifconfig_IF
ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF`
if [ -n "${ifconfig_args}" ]; then
warn "\$ipv6_ifconfig_$1 is obsolete." \
" Use ifconfig_$1_ipv6 instead."
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 inet6 -ifdisabled
eval ${IFCONFIG_CMD} $1 inet6 ${ifconfig_args}
_cfg=0
fi
fi
ifalias $1 link alias
ifalias $1 ether alias
if [ ${_cfg} -eq 0 ]; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 up
fi
if wpaif $1; then
/etc/rc.d/wpa_supplicant start $1
_cfg=0 # XXX: not sure this should count
elif hostapif $1; then
/etc/rc.d/hostapd start $1
_cfg=0
fi
if dhcpif $1; then
if [ $_cfg -ne 0 ] ; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 up
fi
if syncdhcpif $1; then
/etc/rc.d/dhclient start $1
fi
_cfg=0
fi
return $_cfg
}
# ifconfig_down if
# returns 1 if wpa_supplicant or dhclient was stopped or
# the interface exists.
#
ifconfig_down()
{
local _cfg
_cfg=1
if wpaif $1; then
/etc/rc.d/wpa_supplicant stop $1
_cfg=0
elif hostapif $1; then
/etc/rc.d/hostapd stop $1
_cfg=0
fi
if dhcpif $1; then
/etc/rc.d/dhclient stop $1
_cfg=0
fi
if ifexists $1; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 down
_cfg=0
fi
return $_cfg
}
# get_if_var if var [default]
# Return the value of the pseudo-hash corresponding to $if where
# $var is a string containg the sub-string "IF" which will be
# replaced with $if after the characters defined in _punct are
# replaced with '_'. If the variable is unset, replace it with
# $default if given.
get_if_var()
{
local _if _punct _punct_c _var _default prefix suffix
if [ $# -ne 2 -a $# -ne 3 ]; then
err 3 'USAGE: get_if_var name var [default]'
fi
_if=$1
_punct=".-/+"
ltr ${_if} "${_punct}" '_' _if
_var=$2
_default=$3
prefix=${_var%%IF*}
suffix=${_var##*IF}
eval echo \${${prefix}${_if}${suffix}-${_default}}
}
# _ifconfig_getargs if [af]
# Prints the arguments for the supplied interface to stdout.
# Returns 1 if empty. In general, ifconfig_getargs should be used
# outside this file.
_ifconfig_getargs()
{
local _ifn _af
_ifn=$1
_af=${2+_$2}
if [ -z "$_ifn" ]; then
return 1
fi
get_if_var $_ifn ifconfig_IF$_af "$ifconfig_DEFAULT"
}
# ifconfig_getargs if [af]
# Takes the result from _ifconfig_getargs and removes pseudo
# args such as DHCP and WPA.
ifconfig_getargs()
{
local _tmpargs _arg _args _vnet
_tmpargs=`_ifconfig_getargs $1 $2`
if [ $? -eq 1 ]; then
return 1
fi
_args=
_vnet=0
for _arg in $_tmpargs; do
case $_arg:$_vnet in
[Dd][Hh][Cc][Pp]:0) ;;
[Nn][Oo][Aa][Uu][Tt][Oo]:0) ;;
[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]:0) ;;
[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]:0) ;;
[Ww][Pp][Aa]:0) ;;
[Hh][Oo][Ss][Tt][Aa][Pp]:0) ;;
vnet:0) _vnet=1 ;;
*:1) _vnet=0 ;;
*:0)
_args="$_args $_arg"
;;
esac
done
echo $_args
}
# autoif
# Returns 0 if the interface should be automatically configured at
# boot time and 1 otherwise.
autoif()
{
local _tmpargs _arg
_tmpargs=`_ifconfig_getargs $1`
for _arg in $_tmpargs; do
case $_arg in
[Nn][Oo][Aa][Uu][Tt][Oo])
return 1
;;
esac
done
return 0
}
# dhcpif if
# Returns 0 if the interface is a DHCP interface and 1 otherwise.
dhcpif()
{
local _tmpargs _arg
_tmpargs=`_ifconfig_getargs $1`
case $1 in
lo[0-9]*|\
stf[0-9]*|\
lp[0-9]*|\
sl[0-9]*)
return 1
;;
esac
if noafif $1; then
return 1
fi
for _arg in $_tmpargs; do
case $_arg in
[Dd][Hh][Cc][Pp])
return 0
;;
[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
return 0
;;
[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
return 0
;;
esac
done
return 1
}
# syncdhcpif
# Returns 0 if the interface should be configured synchronously and
# 1 otherwise.
syncdhcpif()
{
local _tmpargs _arg
_tmpargs=`_ifconfig_getargs $1`
if noafif $1; then
return 1
fi
for _arg in $_tmpargs; do
case $_arg in
[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
return 1
;;
[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
return 0
;;
esac
done
checkyesno synchronous_dhclient
}
# wpaif if
# Returns 0 if the interface is a WPA interface and 1 otherwise.
wpaif()
{
local _tmpargs _arg
_tmpargs=`_ifconfig_getargs $1`
for _arg in $_tmpargs; do
case $_arg in
[Ww][Pp][Aa])
return 0
;;
esac
done
return 1
}
# hostapif if
# Returns 0 if the interface is a HOSTAP interface and 1 otherwise.
hostapif()
{
local _tmpargs _arg
_tmpargs=`_ifconfig_getargs $1`
for _arg in $_tmpargs; do
case $_arg in
[Hh][Oo][Ss][Tt][Aa][Pp])
return 0
;;
esac
done
return 1
}
# vnetif if
# Returns 0 and echo jail if "vnet" keyword is specified on the
# interface, and 1 otherwise.
vnetif()
{
local _tmpargs _arg _vnet
_tmpargs=`_ifconfig_getargs $1`
_vnet=0
for _arg in $_tmpargs; do
case $_arg:$_vnet in
vnet:0) _vnet=1 ;;
*:1) echo $_arg; return 0 ;;
esac
done
return 1
}
# afexists af
# Returns 0 if the address family is enabled in the kernel
# 1 otherwise.
afexists()
{
local _af
_af=$1
case ${_af} in
inet|inet6)
check_kern_features ${_af}
;;
atm)
if [ -x /sbin/atmconfig ]; then
/sbin/atmconfig diag list > /dev/null 2>&1
else
return 1
fi
;;
link|ether)
return 0
;;
*)
err 1 "afexists(): Unsupported address family: $_af"
;;
esac
}
# noafif if
# Returns 0 if the interface has no af configuration and 1 otherwise.
noafif()
{
local _if
_if=$1
case $_if in
pflog[0-9]*|\
pfsync[0-9]*|\
usbus[0-9]*|\
an[0-9]*|\
ath[0-9]*|\
ipw[0-9]*|\
ipfw[0-9]*|\
iwi[0-9]*|\
iwn[0-9]*|\
ral[0-9]*|\
wi[0-9]*|\
wl[0-9]*|\
wpi[0-9]*)
return 0
;;
esac
return 1
}
# ipv6if if
# Returns 0 if the interface should be configured for IPv6 and
# 1 otherwise.
ipv6if()
{
local _if _tmpargs i
_if=$1
if ! afexists inet6; then
return 1
fi
# lo0 is always IPv6-enabled
case $_if in
lo0)
return 0
;;
esac
case "${ipv6_network_interfaces}" in
$_if|"$_if "*|*" $_if"|*" $_if "*|[Aa][Uu][Tt][Oo])
# True if $ifconfig_IF_ipv6 is defined.
_tmpargs=`_ifconfig_getargs $_if ipv6`
if [ -n "${_tmpargs}" ]; then
return 0
fi
# True if $ipv6_prefix_IF is defined.
_tmpargs=`get_if_var $_if ipv6_prefix_IF`
if [ -n "${_tmpargs}" ]; then
return 0
fi
# backward compatibility: True if $ipv6_ifconfig_IF is defined.
_tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
if [ -n "${_tmpargs}" ]; then
return 0
fi
;;
esac
return 1
}
# ipv6_autoconfif if
# Returns 0 if the interface should be configured for IPv6 with
# Stateless Address Configuration; 1 otherwise.
ipv6_autoconfif()
{
local _if _tmpargs _arg
_if=$1
case $_if in
lo[0-9]*|\
stf[0-9]*|\
lp[0-9]*|\
sl[0-9]*)
return 1
;;
esac
if noafif $_if; then
return 1
fi
if ! ipv6if $_if; then
return 1
fi
if checkyesno ipv6_gateway_enable; then
return 1
fi
Fix several logic bugs in the previous IPv6 variable change and re-add $ipv6_enable support for backward compatibility. From UPDATING: 1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF for IPv4. For aliases, $ifconfig_IF_aliasN should be used. Note that both variables need the "inet6" keyword at the head. Do not set $ipv6_network_interfaces manually if you do not understand what you are doing. It is not needed in most cases. $ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but they are obsolete. 2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or "inet6 accept_rtadv" keyword in ifconfig(8) instead. If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and all configured interfaces have "inet6 accept_rtadv" in the $ifconfig_IF_ipv6. These are for backward compatibility. 3. A new variable $ipv6_prefer has been added. If NO, IPv6 functionality of interfaces with no corresponding $ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag, and the default address selection policy of ip6addrctl(8) is the IPv4-preferred one (see rc.d/ip6addrctl for more details). Note that if you want to configure IPv6 functionality on the disabled interfaces after boot, first you need to clear the flag by using ifconfig(8) like: ifconfig em0 inet6 -ifdisabled If YES, the default address selection policy is set as IPv6-preferred. The default value of $ipv6_prefer is NO. 4. If your system need to receive Router Advertisement messages, define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8) scripts automatically invoke rtsol(8) when the interface becomes UP. The Router Advertisement messages are used for SLAAC (State-Less Address AutoConfiguration).
2009-09-26 18:59:00 +00:00
_tmpargs=`get_if_var $_if ipv6_prefix_IF`
if [ -n "${_tmpargs}" ]; then
return 1
fi
# backward compatibility: $ipv6_enable
case $ipv6_enable in
[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
if checkyesno ipv6_gateway_enable; then
return 1
fi
case $1 in
bridge[0-9]*)
# No accept_rtadv by default on if_bridge(4)
# to avoid a conflict with the member
# interfaces.
return 1
;;
*)
return 0
;;
esac
;;
Fix several logic bugs in the previous IPv6 variable change and re-add $ipv6_enable support for backward compatibility. From UPDATING: 1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF for IPv4. For aliases, $ifconfig_IF_aliasN should be used. Note that both variables need the "inet6" keyword at the head. Do not set $ipv6_network_interfaces manually if you do not understand what you are doing. It is not needed in most cases. $ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but they are obsolete. 2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or "inet6 accept_rtadv" keyword in ifconfig(8) instead. If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and all configured interfaces have "inet6 accept_rtadv" in the $ifconfig_IF_ipv6. These are for backward compatibility. 3. A new variable $ipv6_prefer has been added. If NO, IPv6 functionality of interfaces with no corresponding $ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag, and the default address selection policy of ip6addrctl(8) is the IPv4-preferred one (see rc.d/ip6addrctl for more details). Note that if you want to configure IPv6 functionality on the disabled interfaces after boot, first you need to clear the flag by using ifconfig(8) like: ifconfig em0 inet6 -ifdisabled If YES, the default address selection policy is set as IPv6-preferred. The default value of $ipv6_prefer is NO. 4. If your system need to receive Router Advertisement messages, define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8) scripts automatically invoke rtsol(8) when the interface becomes UP. The Router Advertisement messages are used for SLAAC (State-Less Address AutoConfiguration).
2009-09-26 18:59:00 +00:00
esac
_tmpargs=`_ifconfig_getargs $_if ipv6`
for _arg in $_tmpargs; do
case $_arg in
accept_rtadv)
return 0
;;
esac
done
# backward compatibility: $ipv6_ifconfig_IF
_tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
for _arg in $_tmpargs; do
case $_arg in
accept_rtadv)
return 0
;;
esac
done
return 1
}
# ifexists if
# Returns 0 if the interface exists and 1 otherwise.
ifexists()
{
[ -z "$1" ] && return 1
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} -n $1 > /dev/null 2>&1
}
# ipv4_up if
# add IPv4 addresses to the interface $if
ipv4_up()
{
local _if _ret
_if=$1
_ret=1
# Add 127.0.0.1/8 to lo0 unless otherwise specified.
if [ "${_if}" = "lo0" ]; then
ifconfig_args=`get_if_var ${_if} ifconfig_IF`
if [ -z "${ifconfig_args}" ]; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} ${_if} inet 127.0.0.1/8 alias
fi
fi
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias ${_if} inet alias && _ret=0
return $_ret
}
# ipv6_up if
# add IPv6 addresses to the interface $if
ipv6_up()
{
local _if _ret
_if=$1
_ret=1
if ! ipv6if $_if; then
return 0
fi
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias ${_if} inet6 alias && _ret=0
ipv6_prefix_hostid_addr_common ${_if} alias && _ret=0
ipv6_accept_rtadv_up ${_if} && _ret=0
return $_ret
}
# ipv4_down if
# remove IPv4 addresses from the interface $if
ipv4_down()
{
local _if _ifs _ret inetList oldifs _inet
_if=$1
_ifs="^"
_ret=1
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias ${_if} inet -alias && _ret=0
inetList="`${IFCONFIG_CMD} ${_if} | grep 'inet ' | tr "\n\t" "$_ifs"`"
oldifs="$IFS"
IFS="$_ifs"
for _inet in $inetList ; do
# get rid of extraneous line
case $_inet in
inet\ *) ;;
*) continue ;;
esac
_inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
IFS="$oldifs"
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} ${_if} ${_inet} delete
IFS="$_ifs"
_ret=0
done
IFS="$oldifs"
return $_ret
}
# ipv6_down if
# remove IPv6 addresses from the interface $if
ipv6_down()
{
local _if _ifs _ret inetList oldifs _inet6
_if=$1
_ifs="^"
_ret=1
if ! ipv6if $_if; then
return 0
fi
ipv6_accept_rtadv_down ${_if} && _ret=0
ipv6_prefix_hostid_addr_common ${_if} -alias && _ret=0
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias ${_if} inet6 -alias && _ret=0
inetList="`${IFCONFIG_CMD} ${_if} | grep 'inet6 ' | tr "\n\t" "$_ifs"`"
oldifs="$IFS"
IFS="$_ifs"
for _inet6 in $inetList ; do
# get rid of extraneous line
case $_inet6 in
inet6\ *) ;;
*) continue ;;
esac
_inet6=`expr "$_inet6" : '.*\(inet6 \([0-9a-f:]*\)\).*'`
IFS="$oldifs"
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} ${_if} ${_inet6} -alias
IFS="$_ifs"
_ret=0
done
IFS="$oldifs"
return $_ret
}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifalias if af action
# Configure or remove aliases for network interface $if.
# It returns 0 if at least one alias was configured or
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# removed, or 1 if there were none.
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias()
{
local _ret
_ret=1
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
afexists $2 || return $_ret
case "$2" in
inet|inet6|link|ether)
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_af_common $1 $2 $3 && _ret=0
;;
esac
return $_ret
}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifalias_expand_addr af action addr
# Expand address range ("N-M") specification in addr.
# "addr" must not include an address-family keyword.
# The results will include an address-family keyword.
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_expand_addr()
{
local _af _action
_af=$1
_action=$2
shift 2
afexists $_af || return
ifalias_expand_addr_$_af $_action $*
}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifalias_expand_addr_inet action addr
# Helper function for ifalias_expand_addr(). Handles IPv4.
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_expand_addr_inet()
{
local _action _arg _cidr _cidr_addr _exargs
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
local _ipaddr _plen _range _iphead _iptail _iplow _iphigh _ipcount
local _retstr _c
_action=$1
_arg=$2
shift 2
_exargs=$*
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_retstr=
case $_action:$_arg:$_exargs in
*:*--*) return ;; # invalid
tmp:*[0-9]-[0-9]*:*) # to be expanded
_action="alias"
;;
*:*[0-9]-[0-9]*:*) # to be expanded
;;
tmp:*:*netmask*) # already expanded w/ netmask option
echo ${_arg%/[0-9]*} $_exargs && return
;;
tmp:*:*) # already expanded w/o netmask option
echo $_arg $_exargs && return
;;
*:*:*netmask*) # already expanded w/ netmask option
echo inet ${_arg%/[0-9]*} $_exargs && return
;;
*:*:*) # already expanded w/o netmask option
echo inet $_arg $_exargs && return
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
esac
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
for _cidr in $_arg; do
_ipaddr=${_cidr%%/*}
_plen=${_cidr##*/}
# When subnet prefix length is not specified, use /32.
case $_plen in
$_ipaddr) _plen=32 ;; # "/" character not found
esac
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
OIFS=$IFS
IFS=. set -- $_ipaddr
_range=
_iphead=
_iptail=
for _c in $@; do
case $_range:$_c in
:[0-9]*-[0-9]*)
_range=$_c
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
:*)
_iphead="${_iphead}${_iphead:+.}${_c}"
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
*:*)
_iptail="${_iptail}${_iptail:+.}${_c}"
;;
esac
done
IFS=$OIFS
_iplow=${_range%-*}
_iphigh=${_range#*-}
# clear netmask when removing aliases
if [ "$_action" = "-alias" ]; then
_plen=""
fi
_ipcount=$_iplow
while [ "$_ipcount" -le "$_iphigh" ]; do
_retstr="${_retstr} ${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail}${_plen:+/}${_plen}"
if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]; then
warn "Range specification is too large (${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_iphigh}${_iptail:+.}${_iptail}). ${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail} was processed. Increase \$netif_ipexpand_max in rc.conf."
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
break
else
_ipcount=$(($_ipcount + 1))
fi
# Forcibly set /32 for remaining aliases.
_plen=32
done
done
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
for _c in $_retstr; do
ifalias_expand_addr_inet $_action $_c $_exargs
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
done
}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifalias_expand_addr_inet6 action addr
# Helper function for ifalias_expand_addr(). Handles IPv6.
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_expand_addr_inet6()
{
local _action _arg _cidr _cidr_addr _exargs
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
local _ipaddr _plen _ipleft _ipright _iplow _iphigh _ipcount
local _ipv4part
local _retstr _c
_action=$1
_arg=$2
shift 2
_exargs=$*
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_retstr=
case $_action:$_arg:$_exargs in
*:*--*:*) return ;; # invalid
tmp:*[0-9a-zA-Z]-[0-9a-zA-Z]*:*)# to be expanded
_action="alias"
;;
*:*[0-9a-zA-Z]-[0-9a-zA-Z]*:*) # to be expanded
;;
tmp:*:*prefixlen*) # already expanded w/ prefixlen option
echo ${_arg%/[0-9]*} $_exargs && return
;;
tmp:*:*) # already expanded w/o prefixlen option
echo $_arg $_exargs && return
;;
*:*:*prefixlen*) # already expanded w/ prefixlen option
echo inet6 ${_arg%/[0-9]*} $_exargs && return
;;
*:*:*) # already expanded w/o prefixlen option
echo inet6 $_arg $_exargs && return
;;
esac
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
for _cidr in $_arg; do
_ipaddr="${_cidr%%/*}"
_plen="${_cidr##*/}"
case $_action:$_ipaddr:$_cidr in
-alias:*:*) unset _plen ;;
*:$_cidr:$_ipaddr) unset _plen ;;
esac
if [ "${_ipaddr%:*.*.*.*}" = "$_ipaddr" ]; then
# Handle !v4mapped && !v4compat addresses.
# The default prefix length is 64.
case $_ipaddr:$_cidr in
$_cidr:$_ipaddr) _plen="64" ;;
esac
_ipleft=${_ipaddr%-*}
_ipright=${_ipaddr#*-}
_iplow=${_ipleft##*:}
_iphigh=${_ipright%%:*}
_ipleft=${_ipleft%:*}
_ipright=${_ipright#*:}
if [ "$_iphigh" = "$_ipright" ]; then
unset _ipright
else
_ipright=:$_ipright
fi
if [ -n "$_iplow" -a -n "$_iphigh" ]; then
_iplow=$((0x$_iplow))
_iphigh=$((0x$_iphigh))
_ipcount=$_iplow
while [ $_ipcount -le $_iphigh ]; do
_r=`printf "%s:%04x%s%s" \
$_ipleft $_ipcount $_ipright \
${_plen:+/}$_plen`
_retstr="$_retstr $_r"
if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
then
warn "Range specification is too large $(printf '(%s:%x%s-%s:%x%s)' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_iphigh" "$_ipright"). $(printf '%s:%x%s-%s:%x%s' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_ipcount" "$_ipright") was processed. Increase \$netif_ipexpand_max in rc.conf."
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
break
else
_ipcount=$(($_ipcount + 1))
fi
done
else
_retstr="${_ipaddr}${_plen:+/}${_plen}"
fi
for _c in $_retstr; do
ifalias_expand_addr_inet6 $_action $_c $_exargs
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
done
else
# v4mapped/v4compat should handle as an IPv4 alias
_ipv4part=${_ipaddr##*:}
# Adjust prefix length if any. If not, set the
# default prefix length as 32.
case $_ipaddr:$_cidr in
$_cidr:$_ipaddr) _plen=32 ;;
*) _plen=$(($_plen - 96)) ;;
esac
_retstr=`ifalias_expand_addr_inet \
tmp ${_ipv4part}${_plen:+/}${_plen}`
for _c in $_retstr; do
ifalias_expand_addr_inet $_action $_c $_exargs
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
done
fi
done
}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifalias_af_common_handler if af action args
# Helper function for ifalias_af_common().
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_af_common_handler()
{
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
local _ret _if _af _action _args _c _tmpargs
_ret=1
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_if=$1
_af=$2
_action=$3
shift 3
_args=$*
case $_args in
${_af}\ *) ;;
*) return ;;
esac
# link(ether) does not support address removal.
case $_af:$_action in
link:-alias|ether:-alias) return ;;
esac
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_tmpargs=
for _c in $_args; do
case $_c in
${_af})
case $_tmpargs in
${_af}\ *[0-9a-fA-F]-*)
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_af_common_handler $_if $_af $_action \
`ifalias_expand_addr $_af $_action ${_tmpargs#${_af}\ }`
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${_af}\ *)
${IFCONFIG_CMD} $_if $_tmpargs $_action && _ret=0
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
esac
_tmpargs=$_af
;;
*)
_tmpargs="$_tmpargs $_c"
;;
esac
done
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# Process the last component if any.
if [ -n "$_tmpargs}" ]; then
case $_tmpargs in
${_af}\ *[0-9a-fA-F]-*)
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_af_common_handler $_if $_af $_action \
`ifalias_expand_addr $_af $_action ${_tmpargs#${_af}\ }`
;;
${_af}\ *)
${IFCONFIG_CMD} $_if $_tmpargs $_action && _ret=0
;;
esac
fi
return $_ret
}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifalias_af_common if af action
# Helper function for ifalias().
#
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
ifalias_af_common()
{
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
local _ret _if _af _action alias ifconfig_args _aliasn _c _tmpargs _iaf
local _vif _punct=".-/+"
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_ret=1
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_aliasn=
_if=$1
_af=$2
_action=$3
# Normalize $_if before using it in a pattern to list_vars()
ltr "$_if" "$_punct" "_" _vif
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# ifconfig_IF_aliasN which starts with $_af
for alias in `list_vars ifconfig_${_vif}_alias[0-9]\* |
sort_lite -nk1.$((9+${#_vif}+7))`
do
eval ifconfig_args=\"\$$alias\"
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_iaf=
case $ifconfig_args in
inet\ *) _iaf=inet ;;
inet6\ *) _iaf=inet6 ;;
link\ *) _iaf=link ;;
ether\ *) _iaf=ether ;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
esac
case ${_af}:${_action}:${_iaf}:"${ifconfig_args}" in
${_af}:*:${_af}:*)
_aliasn="$_aliasn $ifconfig_args"
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${_af}:*:"":"")
break
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
inet:alias:"":*)
_aliasn="$_aliasn inet $ifconfig_args"
warn "\$${alias} needs leading" \
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
"\"inet\" keyword for an IPv4 address."
esac
done
# backward compatibility: ipv6_ifconfig_IF_aliasN.
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
case $_af in
inet6)
for alias in `list_vars ipv6_ifconfig_${_vif}_alias[0-9]\* |
sort_lite -nk1.$((14+${#_vif}+7))`
do
eval ifconfig_args=\"\$$alias\"
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
case ${_action}:"${ifconfig_args}" in
*:"")
break
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
alias:*)
_aliasn="${_aliasn} inet6 ${ifconfig_args}"
warn "\$${alias} is obsolete. " \
"Use ifconfig_${_vif}_aliasN instead."
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
;;
esac
done
esac
# backward compatibility: ipv4_addrs_IF.
for _tmpargs in `get_if_var $_if ipv4_addrs_IF`; do
_aliasn="$_aliasn inet $_tmpargs"
done
# Handle ifconfig_IF_aliases, ifconfig_IF_aliasN, and the others.
_tmpargs=
for _c in `get_if_var $_if ifconfig_IF_aliases` $_aliasn; do
case $_c in
inet|inet6|link|ether)
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
case $_tmpargs in
${_af}\ *)
eval ifalias_af_common_handler $_if $_af $_action $_tmpargs && _ret=0
;;
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
esac
_tmpargs=$_c
;;
*)
_tmpargs="$_tmpargs $_c"
esac
done
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# Process the last component
case $_tmpargs in
${_af}\ *)
ifalias_af_common_handler $_if $_af $_action $_tmpargs && _ret=0
;;
esac
return $_ret
}
# ipv6_prefix_hostid_addr_common if action
# Add or remove IPv6 prefix + hostid addr on the interface $if
#
ipv6_prefix_hostid_addr_common()
{
local _if _action prefix j
_if=$1
_action=$2
prefix=`get_if_var ${_if} ipv6_prefix_IF`
if [ -n "${prefix}" ]; then
for j in ${prefix}; do
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
# The default prefixlen is 64.
plen=${j#*/}
case $j:$plen in
$plen:$j) plen=64 ;;
*) j=${j%/*} ;;
esac
# Normalize the last part by removing ":"
j=${j%::*}
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
j=${j%:}
${IFCONFIG_CMD} ${_if} inet6 $j:: \
prefixlen $plen eui64 ${_action}
# if I am a router, add subnet router
# anycast address (RFC 2373).
if checkyesno ipv6_gateway_enable; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} ${_if} inet6 $j:: \
prefixlen $plen ${_action} anycast
fi
done
fi
}
# ipv6_accept_rtadv_up if
# Enable accepting Router Advertisement and send Router
# Solicitation message
ipv6_accept_rtadv_up()
{
if ipv6_autoconfif $1; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 inet6 accept_rtadv up
if ! checkyesno rtsold_enable; then
rtsol ${rtsol_flags} $1
fi
fi
}
# ipv6_accept_rtadv_down if
# Disable accepting Router Advertisement
ipv6_accept_rtadv_down()
{
if ipv6_autoconfif $1; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $1 inet6 -accept_rtadv
fi
}
# ifscript_up if
# Evaluate a startup script for the $if interface.
# It returns 0 if a script was found and processed or
# 1 if no script was found.
#
ifscript_up()
{
if [ -r /etc/start_if.$1 ]; then
. /etc/start_if.$1
return 0
else
return 1
fi
}
# ifscript_down if
# Evaluate a shutdown script for the $if interface.
# It returns 0 if a script was found and processed or
# 1 if no script was found.
#
ifscript_down()
{
if [ -r /etc/stop_if.$1 ]; then
. /etc/stop_if.$1
return 0
else
return 1
fi
}
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
# wlan_up
# Create IEEE802.11 interfaces.
#
wlan_up()
{
local _list _iflist parent child_wlans child create_args debug_flags
_list=
_iflist=$*
# Parse wlans_$parent="$child ..."
for parent in `set | sed -nE 's/wlans_([a-z]+[0-9]+)=.*/\1/p'`; do
child_wlans=`get_if_var $parent wlans_IF`
for child in ${child_wlans}; do
create_args="wlandev $parent `get_if_var $child create_args_IF`"
debug_flags="`get_if_var $child wlandebug_IF`"
case $_iflist in
""|$child|$child\ *|*\ $child\ *|*\ $child) ;;
*) continue ;;
esac
# Skip if ${child} already exists.
if ${IFCONFIG_CMD} $child > /dev/null 2>&1; then
continue
fi
if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
${IFCONFIG_CMD} $child create ${create_args} && cfg=0
if [ $? -eq 0 ]; then
_list="$_list $child"
fi
if [ -n "${debug_flags}" ]; then
wlandebug -i $child ${debug_flags}
fi
else
i=`${IFCONFIG_CMD} wlan create ${create_args}`
# XXXGL: wlandebug should accept any name
if [ -n "${debug_flags}" ]; then
wlandebug -i $i ${debug_flags}
fi
${IFCONFIG_CMD} $i name $child && cfg=0
if [ $? -eq 0 ]; then
_list="$_list $child"
fi
fi
done
done
if [ -n "${_list# }" ]; then
echo "Created wlan(4) interfaces: ${_list# }."
fi
debug "Created wlan(4)s: ${_list# }"
}
# wlan_down
# Destroy IEEE802.11 interfaces.
#
wlan_down()
{
local _list _iflist parent child_wlans child
_list=
_iflist=$*
# Parse wlans_$parent="$child ..."
for parent in `set | sed -nE 's/wlans_([a-z]+[0-9]+)=.*/\1/p'`; do
child_wlans=`get_if_var $parent wlans_IF`
for child in ${child_wlans}; do
case $_iflist in
""|$child|$child\ *|*\ $child\ *|*\ $child) ;;
*) continue ;;
esac
# Skip if ${child} doesn't exists.
if ! ${IFCONFIG_CMD} $child > /dev/null 2>&1; then
continue
fi
${IFCONFIG_CMD} -n ${child} destroy
if [ $? -eq 0 ]; then
_list="$_list $child"
fi
done
done
if [ -n "${_list# }" ]; then
echo "Destroyed wlan(4) interfaces: ${_list# }."
fi
debug "Destroyed wlan(4)s: ${_list# }"
}
# clone_up
# Create cloneable interfaces.
#
clone_up()
{
local _list ifn ifopt _iflist _n tmpargs
_list=
_iflist=$*
# create_args_IF
for ifn in ${cloned_interfaces}; do
# Parse ifn:ifopt.
OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
case $_iflist in
""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn) ;;
*) continue ;;
esac
case $ifn in
epair[0-9]*)
# epair(4) uses epair[0-9] for creation and
# epair[0-9][ab] for configuration.
#
# Skip if ${ifn}a or ${ifn}b already exist.
if ${IFCONFIG_CMD} ${ifn}a > /dev/null 2>&1; then
continue
elif ${IFCONFIG_CMD} ${ifn}b > /dev/null 2>&1; then
continue
fi
${IFCONFIG_CMD} ${ifn} create \
`get_if_var ${ifn} create_args_IF`
if [ $? -eq 0 ]; then
_list="$_list ${ifn}a ${ifn}b"
fi
;;
*)
# Skip if ${ifn} already exists.
if ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
continue
fi
${IFCONFIG_CMD} ${ifn} create \
`get_if_var ${ifn} create_args_IF`
if [ $? -eq 0 ]; then
_list="$_list $ifn"
fi
esac
done
if [ -n "$gif_interfaces" ]; then
warn "\$gif_interfaces is obsolete. Use \$cloned_interfaces instead."
fi
for ifn in ${gif_interfaces}; do
# Parse ifn:ifopt.
OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
case $_iflist in
""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn) ;;
*) continue ;;
esac
# Skip if ifn already exists.
if ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
continue
fi
case $ifn in
gif[0-9]*)
${IFCONFIG_CMD} $ifn create
;;
*)
_n=$(${IFCONFIG_CMD} gif create)
${IFCONFIG_CMD} $_n name $ifn
;;
esac
if [ $? -eq 0 ]; then
_list="$_list $ifn"
fi
tmpargs=$(get_if_var $ifn gifconfig_IF)
eval ifconfig_${ifn}=\"tunnel \$tmpargs\"
done
if [ -n "${_list# }" ]; then
echo "Created clone interfaces: ${_list# }."
fi
debug "Cloned: ${_list# }"
}
# clone_down
# Destroy cloned interfaces. Destroyed interfaces are echoed to
# standard output.
#
clone_down()
{
local _list ifn _difn ifopt _iflist _sticky
_list=
_iflist=$*
: ${cloned_interfaces_sticky:=NO}
if checkyesno cloned_interfaces_sticky; then
_sticky=1
else
_sticky=0
fi
for ifn in ${cloned_interfaces} ${gif_interfaces}; do
# Parse ifn:ifopt.
OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
case $ifopt:$_sticky in
sticky:*) continue ;; # :sticky => not destroy
nosticky:*) ;; # :nosticky => destroy
*:1) continue ;; # global sticky knob == 1
esac
case $_iflist in
""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn) ;;
*) continue ;;
esac
case $ifn in
epair[0-9]*)
# Note: epair(4) uses epair[0-9] for removal and
# epair[0-9][ab] for configuration.
#
# Skip if both of ${ifn}a and ${ifn}b do not exist.
if ${IFCONFIG_CMD} ${ifn}a > /dev/null 2>&1; then
_difn=${ifn}a
elif ${IFCONFIG_CMD} ${ifn}b > /dev/null 2>&1; then
_difn=${ifn}b
else
continue
fi
${IFCONFIG_CMD} -n $_difn destroy
if [ $? -eq 0 ]; then
_list="$_list ${ifn}a ${ifn}b"
fi
;;
*)
# Skip if ifn does not exist.
if ! ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
continue
fi
${IFCONFIG_CMD} -n ${ifn} destroy
if [ $? -eq 0 ]; then
_list="$_list $ifn"
fi
;;
esac
done
if [ -n "${_list# }" ]; then
echo "Destroyed clone interfaces: ${_list# }."
fi
debug "Destroyed clones: ${_list# }"
}
# childif_create
# Create and configure child interfaces. Return 0 if child
# interfaces are created.
2008-04-20 20:37:21 +00:00
#
Replay r286410. Change KPI of how device drivers that provide wireless connectivity interact with the net80211 stack. Historical background: originally wireless devices created an interface, just like Ethernet devices do. Name of an interface matched the name of the driver that created. Later, wlan(4) layer was introduced, and the wlanX interfaces become the actual interface, leaving original ones as "a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer and a driver became a mix of methods that pass a pointer to struct ifnet as identifier and methods that pass pointer to struct ieee80211com. From user point of view, the parent interface just hangs on in the ifconfig list, and user can't do anything useful with it. Now, the struct ifnet goes away. The struct ieee80211com is the only KPI between a device driver and net80211. Details: - The struct ieee80211com is embedded into drivers softc. - Packets are sent via new ic_transmit method, which is very much like the previous if_transmit. - Bringing parent up/down is done via new ic_parent method, which notifies driver about any changes: number of wlan(4) interfaces, number of them in promisc or allmulti state. - Device specific ioctls (if any) are received on new ic_ioctl method. - Packets/errors accounting are done by the stack. In certain cases, when driver experiences errors and can not attribute them to any specific interface, driver updates ic_oerrors or ic_ierrors counters. Details on interface configuration with new world order: - A sequence of commands needed to bring up wireless DOESN"T change. - /etc/rc.conf parameters DON'T change. - List of devices that can be used to create wlan(4) interfaces is now provided by net.wlan.devices sysctl. Most drivers in this change were converted by me, except of wpi(4), that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann, Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in testing. Reviewed by: adrian Sponsored by: Netflix Sponsored by: Nginx, Inc.
2015-08-27 08:56:39 +00:00
# XXXGL: the wlan code in this functions is superseded by wlan_up(),
# and will go away soon.
#
2008-04-20 20:37:21 +00:00
childif_create()
{
local cfg child child_vlans child_wlans create_args debug_flags ifn i
2008-04-20 20:37:21 +00:00
cfg=1
ifn=$1
# Create wireless interfaces
child_wlans=`get_if_var $ifn wlans_IF`
for child in ${child_wlans}; do
create_args="wlandev $ifn `get_if_var $child create_args_IF`"
debug_flags="`get_if_var $child wlandebug_IF`"
2008-04-20 20:37:21 +00:00
if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $child create ${create_args} && cfg=0
if [ -n "${debug_flags}" ]; then
wlandebug -i $child ${debug_flags}
fi
2008-04-20 20:37:21 +00:00
else
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
i=`${IFCONFIG_CMD} wlan create ${create_args}`
if [ -n "${debug_flags}" ]; then
wlandebug -i $i ${debug_flags}
fi
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $i name $child && cfg=0
2008-04-20 20:37:21 +00:00
fi
if autoif $child; then
ifn_start $child
fi
2008-04-20 20:37:21 +00:00
done
# Create vlan interfaces
child_vlans=`get_if_var $ifn vlans_IF`
if [ -n "${child_vlans}" ]; then
load_kld if_vlan
fi
for child in ${child_vlans}; do
if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
child="${ifn}.${child}"
create_args=`get_if_var $child create_args_IF`
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $child create ${create_args} && cfg=0
else
create_args="vlandev $ifn `get_if_var $child create_args_IF`"
if expr $child : 'vlan[0-9][0-9]*$' >/dev/null 2>&1; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $child create ${create_args} && cfg=0
else
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
i=`${IFCONFIG_CMD} vlan create ${create_args}`
${IFCONFIG_CMD} $i name $child && cfg=0
fi
fi
if autoif $child; then
ifn_start $child
fi
done
return ${cfg}
2008-04-20 20:37:21 +00:00
}
# childif_destroy
# Destroy child interfaces.
2008-04-20 20:37:21 +00:00
#
childif_destroy()
{
local cfg child child_vlans child_wlans ifn
cfg=1
2008-04-20 20:37:21 +00:00
child_wlans=`get_if_var $ifn wlans_IF`
for child in ${child_wlans}; do
if ! ifexists $child; then
continue
fi
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} -n $child destroy && cfg=0
done
child_vlans=`get_if_var $ifn vlans_IF`
for child in ${child_vlans}; do
if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
child="${ifn}.${child}"
fi
if ! ifexists $child; then
continue
fi
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} -n $child destroy && cfg=0
2008-04-20 20:37:21 +00:00
done
return ${cfg}
2008-04-20 20:37:21 +00:00
}
# ng_mkpeer
# Create netgraph nodes.
#
ng_mkpeer()
{
ngctl -f - 2> /dev/null <<EOF
mkpeer $*
msg dummy nodeinfo
EOF
}
# ng_create_one
# Create netgraph nodes.
#
ng_create_one()
{
local t
ng_mkpeer $* | while read line; do
t=`expr "${line}" : '.* name="\([a-z]*[0-9]*\)" .*'`
if [ -n "${t}" ]; then
echo ${t}
return
fi
done
}
# ifnet_rename [ifname]
# Rename interfaces if ifconfig_IF_name is defined.
#
ifnet_rename()
{
local _if _ifname
# ifconfig_IF_name
for _if in ${*:-$(${IFCONFIG_CMD} -l)}; do
_ifname=`get_if_var $_if ifconfig_IF_name`
if [ ! -z "$_ifname" ]; then
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
${IFCONFIG_CMD} $_if name $_ifname
fi
done
return 0
}
# list_net_interfaces type
# List all network interfaces. The type of interface returned
# can be controlled by the type argument. The type
# argument can be any of the following:
# nodhcp - all interfaces, excluding DHCP configured interfaces
# dhcp - list only DHCP configured interfaces
# noautoconf - all interfaces, excluding IPv6 Stateless
# Address Autoconf configured interfaces
# autoconf - list only IPv6 Stateless Address Autoconf
# configured interfaces
# If no argument is specified all network interfaces are output.
# Note that the list will include cloned interfaces if applicable.
# Cloned interfaces must already exist to have a chance to appear
# in the list if ${network_interfaces} is set to `auto'.
#
list_net_interfaces()
{
local type _tmplist _list _autolist _lo _if
type=$1
# Get a list of ALL the interfaces and make lo0 first if it's there.
#
_tmplist=
case ${network_interfaces} in
[Aa][Uu][Tt][Oo])
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
_autolist="`${IFCONFIG_CMD} -l`"
_lo=
for _if in ${_autolist} ; do
if autoif $_if; then
if [ "$_if" = "lo0" ]; then
_lo="lo0 "
else
_tmplist="${_tmplist} ${_if}"
fi
fi
done
_tmplist="${_lo}${_tmplist# }"
;;
*)
for _if in ${network_interfaces} ${cloned_interfaces}; do
# epair(4) uses epair[0-9] for creation and
# epair[0-9][ab] for configuration.
case $_if in
epair[0-9]*)
_tmplist="$_tmplist ${_if}a ${_if}b"
;;
*)
_tmplist="$_tmplist $_if"
;;
esac
done
#
# lo0 is effectively mandatory, so help prevent foot-shooting
#
case "$_tmplist" in
lo0|'lo0 '*|*' lo0'|*' lo0 '*)
# This is fine, do nothing
_tmplist="${_tmplist# }"
;;
*)
_tmplist="lo0 ${_tmplist# }"
;;
esac
;;
esac
_list=
case "$type" in
nodhcp)
for _if in ${_tmplist} ; do
if ! dhcpif $_if && \
[ -n "`_ifconfig_getargs $_if`" ]; then
_list="${_list# } ${_if}"
fi
done
;;
dhcp)
for _if in ${_tmplist} ; do
if dhcpif $_if; then
_list="${_list# } ${_if}"
fi
done
;;
noautoconf)
for _if in ${_tmplist} ; do
if ! ipv6_autoconfif $_if && \
[ -n "`_ifconfig_getargs $_if ipv6`" ]; then
_list="${_list# } ${_if}"
fi
done
;;
autoconf)
for _if in ${_tmplist} ; do
if ipv6_autoconfif $_if; then
_list="${_list# } ${_if}"
fi
done
;;
*)
_list=${_tmplist}
;;
esac
echo $_list
2004-06-06 11:46:29 +00:00
return 0
}
# get_default_if -address_family
# Get the interface of the default route for the given address family.
# The -address_family argument must be suitable passing to route(8).
#
get_default_if()
{
local routeget oldifs defif line
defif=
oldifs="$IFS"
IFS="
"
for line in `route -n get $1 default 2>/dev/null`; do
case $line in
*interface:*)
defif=${line##*: }
;;
esac
done
IFS=${oldifs}
echo $defif
}
# hexdigit arg
# Echo decimal number $arg (single digit) in hexadecimal format.
hexdigit()
{
printf '%x\n' "$1"
}
# hexprint arg
# Echo decimal number $arg (multiple digits) in hexadecimal format.
hexprint()
{
printf '%x\n' "$1"
}
is_wired_interface()
{
local media
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
case `${IFCONFIG_CMD} $1 2>/dev/null` in
*media:?Ethernet*) media=Ethernet ;;
esac
test "$media" = "Ethernet"
}
# network6_getladdr if [flag]
# Echo link-local address from $if if any.
# If flag is defined, tentative ones will be excluded.
network6_getladdr()
{
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
local _if _flag proto addr rest
_if=$1
_flag=$2
${IFCONFIG_CMD} $_if 2>/dev/null | while read proto addr rest; do
case "${proto}/${addr}/${_flag}/${rest}" in
inet6/fe80::*//*)
echo ${addr}
;;
inet6/fe80:://*tentative*) # w/o flag
sleep `${SYSCTL_N} net.inet6.ip6.dad_count`
network6_getladdr $_if $_flags
;;
inet6/fe80::/*/*tentative*) # w/ flag
echo ${addr}
;;
*)
continue
;;
esac
- Add CIDR notation support like 192.168.1-2.10-16/24 to $ifconfig_IF_aliasN. This is an extended version of ipv4_addr_IF which supports both IPv4 and IPv6, and multiple range specifications. To avoid to generate too many addresses, the maximum number of the generated addresses is currently limited to 31. - Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable. - ipv6_prefix_IF now supports !/64 prefix length. In addition to the old 64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64 is supported. - Replace ifconfig command with $IFCONFIG_CMD variable to support a dry-run mode in the future. - Remove IP aliases before removing all of IPv4 addresses when doing "rc.d/netif down". - Add a DAD wait to network6_getladdr() because it is possible to fail to configure an EUI64 address when ipv6_prefix_IF is specified. A summary of the supported ifconfig_* variables is as follows: # IPv4 configuration. ifconfig_em0="inet 192.168.0.1" # IPv6 configuration. ifconfig_em0_ipv6="inet6 2001:db8::1/64" # IPv4 address range spec. Now deprecated. ipv4_addr_em0="10.2.1.1-10" # IPv6 alias. ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70" # IPv4 alias. ifconfig_em0_alias1="inet 10.2.2.1/24" # IPv4 alias with range spec w/o AF keyword (backward compat). ifconfig_em0_alias2="10.3.1.1-10/32" # IPv6 alias with range spec. ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64" # ifconfig_IF_aliases is just like ifconfig_IF_aliasN. ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24" # IPv6 alias (backward compat) ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64" # IPv6 alias w/o AF keyword (backward compat) ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64" # IPv6 prefix. ipv6_prefix_em0="2001:db8::/64" Tested by: Kimmo Paasiala
2013-06-20 02:29:49 +00:00
return
done
}