ABI-required stack alignment. C code expects that the push of the
return address disturbed the 16 byte alignment and it will take corrective
measures to fix it before making another call. Of course, if its wrong
to start with, then all hell breaks loose. Essentially we "fix" this
by making the stack alignment odd to start with.
This was one of the things that broke on libkse with apps that use
floating point/varargs/etc.
Approved by: re (scottl)
Update notes to reflect that cx is no longer a counted device
Update options for new cx option
# commented out ELAN_PPS and ELAN_XTAL since they produced errors
Submitted by: rik@cronyx.ru
Approved by: re@ <scottl>
- Add a really, really, nasty hack to provide stub versions of all of
the 'device apic' functions used by the ACPI MADT APIC enumerator if
'device apic' is not compiled into the kernel. This is gross but is
the best we can do with the current kernel linker implementation.
Approved by: re (scottl / blanket)
SI_SUB_CPU - 1 and probe enumerators, probe CPUs, and setup the local
APIC programming all at SI_SUB_CPU / SI_ORDER_FIRST. This is needed to
help get the ACPI module working again as it moves the APIC enumeration
code after SI_SUB_KLD.
- In the MADT parser, use mp_maxid rather than MAXCPU to terminate a loop
when assigning per-cpu ACPI IDs to avoid a dependency on 'options SMP'.
- Allow the apic device to be disabled via 'hint.apic.0.disabled' from the
loader. Note that since this is done in the local APIC code, it works
for both the ACPI and non-ACPI cases.
Approved by: re (scott / blanket)
- Dynamically allocate the cpu_softc[] array based on mp_maxid instead of
using a statically sized array that depended on 'options SMP'.
- Use mp_maxid rather than MAXCPU when walking all the CPUs looking for a
match.
- Always call smp_rendezvous() since UP kernels now provide this.
- Use mp_ncpus rather than cpu_ndevices when determining if we need to
disable C3 for SMP machines.
Approved by: re (rwatson)
Reviewed by: njl
The sconfig utility supports more than just cx boards, and those drivers
will make their way into FreeBSD shortly (maybe before 5.2).
Confirmed that this doesn't break the build.
Submitted by: Roman Kurakin <rik@cronyx.ru>
Approved by: re@ <scottl>
+ Patch is not my friend, but an evil toad
Remove redunant copy of each of these files that patch appended to them.
# Still not connected to the build.
Approved by: re@ <scottl>
1) mp_maxid is a valid FreeBSD CPU ID in the range 0 .. MAXCPU - 1.
2) For all active CPUs in the system, PCPU_GET(cpuid) <= mp_maxid.
Approved by: re (scottl)
Tested on: i386, amd64, alpha
aid other kernel code, especially code which can be in a module such as
the acpi_cpu(4) driver, to work properly with both SMP and UP kernels.
The exported symbols include mp_ncpus, all_cpus, mp_maxid, smp_started, and
the smp_rendezvous() function. This also means that CPU_ABSENT() is now
always implemented the same on all kernels.
Approved by: re (scottl)
This is the new cronyx serial control program.
# A future commit will remove the old driver/userland pieces and connect things
# to the build.
Submitted by: Roamn Kurakin <rik@cronyx.ru>
This is the vastly updated cx drvier from Roman Kurakin <rik@cronyx.ru>
who has been patiently waiting for this update for sometime.
The driver is mostly a rewrite from the version we have in the tree.
While some similarities remain, losing the little history that the old
driver has is not a big loss, and the re@ felt it was easier this way (less
error prone).
The userland parts of this update will be committed shortly.
The driver is not connected to the build yet. I want to make sure I
don't break any platform at any time, so I want to test that with
these files in the tree before I continue (on the off chance I'm
forgetting a file).
I changed the DEBUG macro to CX_DEBUG from the code that was submitted
(to not break when we go to building with opt_global.h after the
release), as well adding $FreeBSD$.
Submitted by: Roman Kurakin
Approved by: re@ <scottl>
we can end up with some threads with a non-16-byte-aligned stack. This
causes some interesting side effects, including general protection
faults leading to a SIGBUS when doing floating point or varargs. This
should be just a verbose NOP for the other platforms.
Approved by: re (scottl)
Before committing the initial tcp_hostcache I changed them from memcpy()
to conform with FreeBSD style without realizing the difference in argument
definition.
This fixes hostcache operation for IPv6 (in general and explicitly IPv6
path mtu discovery) and T/TCP (RFC1644).
Submitted by: Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
Approved by: re (rwatson)
(Lite Edition) respectively. These "lite" packages are streamlined to
provide users with the core essentials for each desktop and to fit on the
release disc 1.
Approved by: re (scottl)
Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Submitted by: darrenr
Approved by: re (scottl)
on. MCOUNT and FAKE_MCOUNT() may clobber all the call-used registers,
and one FAKE_MCOUNT() was placed so that an active %eax was clobbered.
The fix is to move this FAKE_MCOUNT() earlier where it should have
been anyway.
Fixed 3 layers of bitrot in the comment about why this FAKE_MCOUNT()
was where it was by removing the comment. (mcount() should be called
as early as possible after entering a new level, but an implementation
detail got in the way until 3 layers of changes ago.)
Kernel profiling still gives wrong results because the new interrupt
code rearranged object files too much. mcount() depends on trap,
syscall and interrupt handlers being between certain magic labels with
interrupt handlers last, and on nothing else being there. Splitting
up exception.o moved the magic labels to effectively random places
relative to what they are supposed to delimit. This mainly broke the
call graph; the flat profile is still usable.
code. Both the driver and the new code were wrong. Driver interrupt
handlers are supposed to take "void *vsc" arg, but some including all
COMPAT_ISA drivers and the pci part of the cy driver want an "int unit"
arg. They got this using bogus casts of function pointers which should
have kept working despite their bogusness. However, the new interrupt
code doesn't honor requests to pass an arg of ((void *)0), so things
are very broken if the arg is actually a representation of unit 0.
The fix is to use a normal "void *vsc" arg for the pci case and a
wrapper for the COMPAT_ISA case (of the cy driver). This cleans up
new-busification of the pci case but takes the COMPAT_ISA case a little
further from new-bus. The corresponding bug for the COMPAT_ISA case
has already been fixed similarly using a wrapper in compat_isa.c and
we need another wrapper just to undo that.
Fixed some directly related style bugs (mainly by removing compatibility
cruft).
cy.c:
Fixed an indirectly related old bug in cyattach_common(). A wrong status
was returned in the unlikely event that malloc() failed.
Approved by: re (scottl)
issues which they found and asked to be changed so 3ware can offcially
support the driver.
Summary of the most significant changes:
- TWE_OVERRIDE is no longer supported
- If twe_getparam failed, bogus data would be returned to the caller
- Cache the device unit in the twe_drive structure to aid debugging
- Add the 3ware driver version.
- Proper return error codes for many functions.
- Track the minimum queue length statistics
- 4.x compat: use the cached unit number from the twe_drive structure
instead of the the cached si_drv2. 3ware found that after many loads
and unloads that si_drv2 became corrupted. This did not happen in
-current.
Submitted by: Vinod Kashyap (with modifications by me)
Approved by: re (rwatson)
o Back out workaround for not resetting lucent cards more than once. With
these fixes, it appaers they are no longer necessary.
o Set wi_gone when the card goes awol: typically when we get 0xffff back from
the card. Also, don't interact with a card that's gone, so we fail in
seconds rather than minutes. Also reduce amount of time we wait to .5s
in wi_cmd.
o clear wi_gone on ifconfig down to give some cards a chance after they wedge
(this appears to unwedge one of my prism cards with old firmware). ifconfig
up will fail quickly enough if the card really is out to lunch.
o Add delay in wi_init of 100ms.
o wi_stop(ifp, 0->1) changes so that we clear sc_enabled so that we
exit out of the interrupt routine by just acking the interrupt
Submitted by: iedowse
Approved by: re@ (scottl)
# after the freeze I'll fix some of the minor style issues that reviewers
# of this patch have told me about.
