Some consumers actually use this definition.
We probably need some procedure to ensure that SHLIB_VERSION_NUMBER
is updated whenever we change the library version in
secure/lib/libssl/Makefile.
Add accessor functions to toggle the state per VNET.
The base system (vnet0) will always enable itself with the normal
registration. We will share the registered protocol handlers in all
VNETs minimising duplication and management.
Upon disabling netisr processing for a VNET drain the netisr queue from
packets for that VNET.
Update netisr consumers to (de)register on a per-VNET start/teardown using
VNET_SYS(UN)INIT functionality.
The change should be transparent for non-VIMAGE kernels.
Reviewed by: gnn (, hiren)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6691
The current error path in case of failure during attach/initialization is
not correct and leaves blkback in a stuck state. This is due to blkback
waiting for blkfront to switch to state XenbusStateClosed, but if blkfront
never attached (because the guest is not even started) it cannot possibly
make it to that state.
Instead just wait for the frontend to be in a state different than
XenbusStateConnected in order to proceed with the shutdown. Also, it is
wrong to call xbb_detach directly because it destroys the lock which can
still be used by xbb_frontend_changed.
Sponsored by: Citrix Systems R&D
Hotplug scripts are needed in order to use fancy disk configurations in xl,
like iSCSI disks. The job of hotplug scripts is to locally attach the disk
and present it to blkback as a block device or a regular file.
This change introduces a new xenstore node in the blkback hierarchy, called
"physical-device-path". This is a straigh replacement for the "params" node,
which was used before.
Hotplug scripts will need to read the "params" node, perform whatever
actions are necessary and then write the "physical-device-path" node. The
hotplug script is also in charge of detaching the disk once the domain has
been shutdown.
Sponsored by: Citrix Systems R&D
controller devices are attached. This has already been done for
bus_setup_intr().
There was no doubt that if someone wants to setup an interrupt,
corresponding interrupt controller device must already be attached.
However, the same must be valid for allocation of an interrupt resource
unless the allocation is done blindly, without any information that
such interrupt even exists. While it was done this blind way before,
it won't be possible after next INTRNG change.
framework has significantly changed the driver has moved to a new file.
While it shares some code with the existing driver this has been modified
to work better with the intrng framework.
This has been tested on the ThunderX servers in the netperf cluster and has
been used to boot them for other testing, including DTrace and hwpmc.
With this we can use intrng on all supported arm64 platforms I was able to
test on. It is expected we will move to intrng soon, and disable the old
arm64 interrupt framework.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6437
range of interrupts they pass to a second controller driver to handle.
The parent driver is expected to detect when one of these interrupts has
been triggered and call intr_child_irq_handler to pass the interrupt to
a child. The children controllers are then expected to manage the range
by allocating interrupts as needed.
This will initially be used by the ARM GICv3 driver, but is is expected to
be useful for other driver where this type of allocation applies.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6436
Replacing the bubble sort with insertion sort gives an 80% reduction
in runtime on average, with randomized keys, for small partitions.
If the keys are pre-sorted, insertion sort runs in linear time, and
even if the keys are reversed, insertion sort is faster than bubble
sort, although not by much.
Update comment describing "tcp_lro_sort()" while at it.
Differential Revision: https://reviews.freebsd.org/D6619
Sponsored by: Mellanox Technologies
Tested by: Netflix
Suggested by: Pieter de Goeje <pieter@degoeje.nl>
Reviewed by: ed, gallatin, gnn, transport
Install the blacklistd.conf man page, missed in the original commit.
Submitted by: Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6702
That check wasn't enough to handle appending a two byte character
following it.
This prevented my T400 (Intel Core 2 Duo P8400) from attaching;
it would panic from a stack overflow detection.
Correct switch between current and previous line buffers when
encountering a carriage return in the input.
CID: 1305719
Obtained from: OpenBSD (CVS rev. 1.30)
MFC after: 3 days
Only attempt to detect AVG if SSE2 is available
Summary:
In PR29973 Sanjay Patel reported an assertion failure when a certain
loop was optimized, for a target without SSE2 support. It turned out
this was because of the AVG pattern detection introduced in rL253952.
Prevent the assertion failure by bailing out early in
`detectAVGPattern()`, if the target does not support SSE2.
Also add a minimized test case.
Reviewers: congh, eli.friedman, spatel
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D20905
This should fix assertion failures ("Requires at least SSE2!") when
building the games/0ad port with CPUTYPE=pentium3.
Reported by: madpilot
Only HMAC-SHA256 is added as it is the only SHA-2 variant supported by
cryptodev. It is not possible to register hardware support for other
algorithms in the family including regular non-keyed SHA256.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6219
The output of HMAC was previously truncated to 12 bytes. This was only
correct in case of one particular crypto client - the new version of IPSEC.
Fix by taking into account the cri_mlen field in cryptoini session request
filled in by the client.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6218
TDMA and CESA registers are placed in different ranges of memory. Split
memory resource in DTS to reflect that. This change is needed to support
multiple CESA nodes as otherwise the ranges of different nodes would
overlap.
In consequence, CESA_WRITE and CESA_READ macros have been split depending
on which range of registers is accessed. Offsets for CESA registers have
been modified as the base address has changed.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6217
Check if there is a second CESA SRAM node in FDT and add a CPU window
for it. Define A38X specific macro for setting device attribute for
each node.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6216
On other platforms with CESA accelerator the SRAM memory is mapped in
early init before driver is attached. This method only works correctly
with mappings no smaller than L1 section size (1MB). There may be more
SRAM blocks and they may have smaller sizes than 1MB as is the case
for Armada38x. Instead, map SRAM memory with bus_space_map() in CESA
driver attach. Note that we can no longer assume that VA == PA for the
SRAM.
Submitted by: Michal Stanek <mst@semihalf.com
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6215
NetBSD installs the blacklist-helper script in /libexec, and
it goes into /usr/libexec on FreeBSD. Update the docs to
match FreeBSD's installation location.
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6592
Commit was temporary fix due to rman_res_t defined as 32-bit u_long.
After redefining it as 64-bit variable workaround is not needed and
was removed.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D6214
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.
Submitted by: Mike Karels
Differential Revision: https://reviews.freebsd.org/D6262
It appears "sorted" may have not been implemented. Sorted or not,
we always follow the same action so simplify the code.
Leave a note for future generations.
CID: 1347084
Otherwise we transmit the first neighbour solicitation in the context of the
caller of nd6_dad_start(), which can easily result in lock recursion. When
DAD is to be started after some delay, we send the first NS from the DAD
callout handler, so just change the implementation to do this in the
non-delayed case as well.
Reviewed by: ae, hrs
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6639
Per the KASSERT at the beginning of the function, we expect that the page
does not belong to any object, so its object and pindex fields are
meaningless. Reset them in the rare case that vm_radix_insert() fails.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6669
The PV backend will only pick the new options when the interface is detached
and reattached again, so perform a full reset when changing options. This is
very fast, and should not be noticeable by the user.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6658
Just calling gnttab_end_foreign_access_ref doesn't free the references,
instead call gnttab_end_foreign_access with a NULL page argument in order to
have the grant references freed. The code that maps the ring
(xenbus_map_ring) already uses gnttab_grant_foreign_access which takes care
of allocating a grant reference.
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D6608
