New driver to ACPI generic event device, defined in ACPI spec.
Some ACPI power button may not work without this.
In qemu arm64 with "virt" machine, with ACPI firmware,
enable devd check devd message by
and invoke following command in qemu monitor
(qemu) system_powerdown
and make sure some power button input event appear.
(setting sysctl hw.acpi.power_button_state=S5 is not work,
because ACPI tree does not have \_S5 object.)
Reviewed by: andrew, hrs
Differential Revision: https://reviews.freebsd.org/D37032
Import two files left out initially from the driver needed for debugfs
support [1]. Adjust the driver further to make it compile on FreeBSD.
This is currently turned off and needs more LinuxKPI/lindebugfs work.
Being in the tree will allow us to collaboratively work on it and
then we can enable it for good.
Obtained from: Linux wireless-testing (tag: wt-2022-10-19) [1]
2c9078b9abcb884e27360340aaa7dfd4c0de29b3
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.
The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.
Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:
acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX
dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.
The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.
Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638
This is a new DTrace provider which allows arbitrary kernel instructions
to be traced. Currently it is implemented only for amd64.
kinst probes are created on demand by libdtrace, and there is a probe
for each kernel instruction. Probes are named
kinst:<module>:<function>:<offset>, where "offset" is the offset of the
target instruction relative to the beginning of the function. Omitting
"offset" causes all instructions in the function to be traced.
kinst works similarly to FBT in that it places a breakpoint on the
target instruction and hooks into the kernel breakpoint handler.
Because kinst has to be able to trace arbitrary instructions, it does
not emulate most of them in software but rather causes the traced thread
to execute a copy of the instruction before returning to the original
code.
The provider is quite low-level and as-is will be useful mostly only to
kernel developers. However, it provides a great deal of visibility into
kernel code execution and could be used as a building block for
higher-level tooling which can in some sense translate between C sources
and generated machine code. In particular, the "regs" variable recently
added to D allows the CPU's register file to be accessed from kinst
probes.
kinst is experimental and should not be used on production systems for
now.
In collaboration with: markj
Sponsored by: Google, Inc. (GSoC 2022)
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36851
Add the glue code to support netlink in Linuxolator.
linux_common(4) now depends on netlink(4).
All netlink protocol constants are consistent with the Linux version.
However, certain OS-specific constants such as AF_INET6, interface
flags or default routing table id, are different between FreeBSD and
Linux. Thus, it may be needed to rewrite some message parts or even
rewrite the whole message, adding or removing some TLVs. The core
netlink implementation code provides efficient rewriting callbacks
which Linuxolator now uses.
Reviewed by: dchagin
Differential Revision: https://reviews.freebsd.org/D36361
MFC after: 2 months
Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.
The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
- routes
- nexthops / nexthop groups
- interfaces
- interface addresses
- neighbors (arp/ndp)
* Notifications:
- interface arrival/departure
- interface address arrival/departure
- route addition/deletion
* Modifications:
- adding/deleting routes
- adding/deleting nexthops/nexthops groups
- adding/deleting neghbors
- adding/deleting interfaces (basic support only)
* Rtsock interaction
- route events are bridged both ways
The implementation also supports the NETLINK_GENERIC family framework.
Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
that can sleep, such as interface creation. All message processing is
performed within these taskqueues.
Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after: 2 months
Use the correct option to suppress warnings due to discarding const
from pointers on GCC vs clang.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D36780
While for in-kernel we already have LINUXKPI_INCLUDES in kern.pre.mk
for kmod builds we've not had a common define to use leading to various
spellings of include paths.
In order for the include list to be expanded more easily in the future,
e.g., adding the "dummy" includes (for all) and to harmonize code,
duplicate LINUXKPI_INCLUDES to kmod.mk and use it for all module Makefiles.
MFC after: 1 week
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D36683
Notable upstream pull request merges:
#13725 Fix BLAKE3 tuneable and module loading on Linux and FreeBSD
#13756 FreeBSD: Organize sysctls
#13773 FreeBSD: add kqfilter support for zvol cdev
#13781 Importing from cachefile can trip assertion
#13794 Apply arc_shrink_shift to ARC above arc_c_min
#13798 Improve too large physical ashift handling
#13799 Revert "Avoid panic with recordsize > 128k, raw sending and
no large_blocks"
#13802 Add zfs.sync.snapshot_rename
#13831 zfs_enter rework
#13855 zfs recv hangs if max recordsize is less than received
recordsize
Obtained from: OpenZFS
OpenZFS commit: c629f0bf62
This diff extends LinuxKPI to support simple attribute files in debugfs.
These simple attributes are an essential component for compiling drm-kmod
with CONFIG_DEBUG_FS enabled.
This will allow for easier graphics driver debugging using
Intel's igt-gpu-tools.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D35883
Sponsored by: Google, Inc. (GSoC 2022)
This merges TCA6416, TCA6408 drivers and adds PCA9555 support.
They handle 8 pin and 16 pin ICs with basic INPUT/OUTPUT functionality.
The register map is fairly similar so there is no point in having two
separate drivers.
Reviewed by: kd
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36559
As all ISA sound card drivers have been removed sndbuf_dma no longer
serves any purpose.
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
Import the most recent versions of the firmware images for the
rtw89 driver.
This is based on linux-firmware at 2f2f0181581d3e35bfdb9fc65f609ee9d3fbaeb7.
The license of the firmware matches the previously added rtw88(4) firmware
and you can find a copy in sys/contrib/dev/rtw89fw/LICENCE.rtlwifi_firmware.txt.
Add build infrastructure to create the .ko files but do not yet hook
it up to the build until all parts are in the tree.
Approved by: core.11 (imp) [2022-03-27]
MFC after: 6 weeks
Import rtw89 based on wireless-testing at (tag: wt-2022-09-02)
78667a29c116c6b186a37e28cd8dd7fa9923aee8 with adjustments for FreeBSD.
For the moment this will stay disconnected from the build until the
last bits are flushed out, but this will help people with a card to
do testing and possibly help improving.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core.11 (imp) [1] [2022-03-27]
MFC after: 6 weeks
Although originally socket was intended to use with ipfw(4) only, now
it also can be used with pf(4). On a kernel without packet filters,
it still can be used to inject traffic.
CWARNFLAGS must be added to after including kern.mk, otherwise all the
warnings set in kern.mk are ignored. This is why the
-Wmissing-prototypes warnings were not seen previously.
While here, drop -Wno-pointer-sign as it is doesn't seem to be needed,
but add -Wno-cast-qual to silence warnings for various casts of const
pointers to non-const pointers.
Reviewed by: MichalX.Gulbicki_intel.com, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36332
Notable upstream pull request merges:
#13717 Fix zpool status in case of unloaded keys
#13753 Prevent zevent list from consuming all of kernel memory
#13767 arcstat: fix -p option
#13785 Updates for snapshots_changed property
Obtained from: OpenZFS
OpenZFS commit: a582d52993
Changes since 1.26.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.17.0.0 for Linux" dated
2022-07-29.
Fixes
-----
BASE:
- Enabled all MA parity interrupt bits.
- Use config file value to override number of rx channel. nrxch=1 was not
handled in the firmware.
- Replaced read only registers with new registers EDC_H_BIST_USER_WDATA0,
EDC_H_BIST_USER_WDATA1 and EDC_H_BIST_CMD_LEN to dump the uP memory parity
error status registers.
- 10G simplex module support enabled.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
Notable upstream pull request merges:
#9372 Implement a new type of zfs receive: corrective receive (-c)
#13635 Add snapshots_changed as property
#13636 Add support for per dataset zil stats and use wmsum counters
#13643 Fix scrub resume from newly created hole
#13670 Fix memory allocation for the checksum benchmark
#13695 Skip checksum benchmarks on systems with slow cpu
#13711 zpool: fix redundancy check after vdev removal
Obtained from: OpenZFS
OpenZFS commit: b3d0568cfd
TARGET_ARCH is always wrong when not used at the toplevel Makefile*, or
in something that has to be included from there. Switch to using
MACHINE_ARCH exclusively here since there's no benefit from assigning
TARGET_ARCH the value of MACHINE_ARCH and then using TARGET_ARCH (and
make TARGET_ARCH=xxx won't work).
Sponsored by: Netflix
Update iwlwifi 22000 firmware to -73 and rebuilds for 9000/9260.
Update the driver to accept the newer version.
Firmware was obtained from linux-firmware at
150864a4d73e8c448eb1e2c68e65f07635fe1a66.
Sponsored by: The FreeBSD Foundation
MFC after: 23 days
QAT in-tree driver ported from out-of-tree release available
from 01.org.
The driver exposes complete cryptography and data compression
API in the kernel and integrates with Open Crypto Framework.
Details of supported operations, devices and usage can be found
in man and on 01.org.
Patch co-authored by: Krzysztof Zdziarski <krzysztofx.zdziarski@intel.com>
Patch co-authored by: Michal Jaraczewski <michalx.jaraczewski@intel.com>
Patch co-authored by: Michal Gulbicki <michalx.gulbicki@intel.com>
Patch co-authored by: Julian Grajkowski <julianx.grajkowski@intel.com>
Patch co-authored by: Piotr Kasierski <piotrx.kasierski@intel.com>
Patch co-authored by: Adam Czupryna <adamx.czupryna@intel.com>
Patch co-authored by: Konrad Zelazny <konradx.zelazny@intel.com>
Patch co-authored by: Katarzyna Rucinska <katarzynax.kargol@intel.com>
Patch co-authored by: Lukasz Kolodzinski <lukaszx.kolodzinski@intel.com>
Patch co-authored by: Zbigniew Jedlinski <zbigniewx.jedlinski@intel.com>
Reviewed by: markj, jhb (OCF integration)
Reviewed by: debdrup, pauamma (docs)
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34632
A replacement QAT driver will be imported, but this replacement does not
support Atom C2xxx hardware. So, the existing driver will be kept
around to provide opencrypto offload support for those chipsets.
Reviewed by: pauamma, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35817
With clang 15, the following -Werror warning is produced:
sys/contrib/openzfs/module/zfs/zfs_fm.c:256:6: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int cnt = 0;
^
The 'cnt' variable does not seem to be used for anything, but since this
is contributed code, suppress the warning instead.
MFC after: 3 days
Clang 15 is more strict about function definitions not matching
declarations, and zlib has a lot of these, but since it is contributed
code (and in K&R style to boot), suppress those warnings instead.
MFC after: 3 days
Generally, access to the kernel debugger is considered to be unsafe from
a security perspective since it presents an unrestricted interface to
inspect or modify the system state, including sensitive data such as
signing keys.
However, having some access to debugger functionality on production
systems may be useful in determining the cause of a panic or hang.
Therefore, it is desirable to have an optional policy which allows
limited use of ddb(4) while disabling the functionality which could
reveal system secrets.
This loadable MAC module allows for the use of some ddb(4) commands
while preventing the execution of others. The commands have been broadly
grouped into three categories:
- Those which are 'safe' and will not emit sensitive data (e.g. trace).
Generally, these commands are deterministic and don't accept
arguments.
- Those which are definitively unsafe (e.g. examine <addr>, search
<addr> <value>)
- Commands which may be safe to execute depending on the arguments
provided (e.g. show thread <addr>).
Safe commands have been flagged as such with the DB_CMD_MEMSAFE flag.
Commands requiring extra validation can provide a function to do so.
For example, 'show thread <addr>' can be used as long as addr can be
checked against the system's list of process structures.
The policy also prevents debugger backends other than ddb(4) from
executing, for example gdb(4).
Reviewed by: markj, pauamma_gundo.com (manpages)
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35371
When ice is built as a module, it can't be loaded due to unresolved
symbol. Ensuring in Makefile that the ice_rdma.c is built fixes the
problem.
Signed-off-by: Bartosz Sobczak <bartosz.sobczak@intel.com>
Signed-off-by: Eric Joyner <erj@freebsd.org>
Reviewed by: erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D35687
Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
After some discussion, for now, simply revert the change to split
the driver up into if_rtw88_core.ko and if_rtw88_pci.ko as we do
not have an if_rtw88.ko anymore. We do have code trying to
auto-load modules, e.g. ifconfig, based on if_xxx.ko.
We could, based on Makefile magic or further code, generate a
if_rtw88.ko module with proper dependencies and keep this but for
simplicity stay with the one slightly larger module for now.
Should code appear to do this "properly" we can revisit this once
USB support has landed.
Slightly update the module Makefile to keep the separation of files
between core and pci bits visible and maintainable for the future.
This reverts commit 0f7b9777f8.
OpenVPN Data Channel Offload (DCO) moves OpenVPN data plane processing
(i.e. tunneling and cryptography) into the kernel, rather than using tap
devices.
This avoids significant copying and context switching overhead between
kernel and user space and improves OpenVPN throughput.
In my test setup throughput improved from around 660Mbit/s to around
2Gbit/s.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34340
Add support of ARM CMN-600 controller, PMU access functions only.
Add support of PMU counters of ARM CMN-600 controller.
Reviewed by: mhorne
Sponsored By: ARM
Differential Revision: https://reviews.freebsd.org/D32321
Remove -mgeneral-regs-only when building the arm64 blake3 code. It
uses simd instructions so will use non-general purpose registers.
Sponsored by: The FreeBSD Foundation
Along with the snd_sb8 and snd_sb16 drivers. They supported ISA
Creative Sound Blaster and compatible sound cards.
Note that isa/sb.h is not removed, as it is still used by some PCI
sound card drivers.
ISA sound card drivers are deprecated as discussed on the current[1] and
stable[2] mailing lists. Deprecation notices were added in e39ec8933b
and MFCd to stable branches.
Driver removals are being committed individually so that specific
drivers can be restored if necessary (either in FreeBSD or by downstream
projects).
[1] https://lists.freebsd.org/archives/freebsd-current/2022-March/001680.html
[2] https://lists.freebsd.org/archives/freebsd-stable/2022-March/000585.html
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
They are not loadable otherwise.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35369
Split the driver up into two modules (if_rtw88_pci.ko and rtw88_core.ko).
This is in preparation for the hopefully eventually upcoming USB support
using the same driver core.
Note: this changes the module name to load to if_rtw88_pci.ko instead of
if_rtw88.ko. If using devmatch(8) everything should stay the same as
the driver name (used for net.wlan.devices) stays rtw88. If using
kld_list in rc.conf or loader.conf you will need to adjust the name.
Update man page for this.
MFC after: 3 days
Notable upstream pull request merges:
#12321 Fix inflated quiesce time caused by lwb_tx during zil_commit()
#13244 zstd early abort
#13360 Verify BPs as part of spa_load_verify_cb()
#13452 More speculative prefetcher improvements
#13466 Expose zpool guids through kstats
#13476 Refactor Log Size Limit
#13484 FreeBSD: libspl: Add locking around statfs globals
#13498 Cancel in-progress rebuilds when we finish removal
#13499 zed: Take no action on scrub/resilver checksum errors
#13513 Remove wrong assertion in log spacemap
Obtained from: OpenZFS
OpenZFS commit: b9d98453f9
This module depends on the presence of both INET and INET6 options in
order to compile.
Reviewed by: erj
Fixes: cdcd52d41e ("irdma: Add RDMA driver for Intel(R) Ethernet...")
Differential Revision: https://reviews.freebsd.org/D35343
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access to shared resources.
This interface already existed in the standalone out-of-tree
1.34.2 driver; this commit adds and enables it in the in-kernel
driver.
Note:
Adds hack to module Makefile to compile interface/.m files
These are required for the RDMA client interface, but they don't
build as-is like the normal .c files. The source directory doesn't
seem to be included by default, so add lines that specifically
add them as libraries so that ice_rdma.h can be found and the
interface files will compile.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30889
Notable upstream pull request merges:
#10662 zvol_wait: Ignore locked zvols
#12789 Improve log spacemap load time
#12812 Improved zpool status output, list all affected datasets
#13277 FreeBSD: Use NDFREE_PNBUF if available
#13302 Make zfs_max_recordsize default to 16M
#13311 Fix error handling in FreeBSD's get/putpages VOPs
#13345 FreeBSD: Fix translation from ABD to physical pages
#13373 zfs: holds: dequadratify
#13375 Corrected edge case in uncompressed ARC->L2ARC handling
#13388 Improve mg_aliquot math
#13405 Reduce dbuf_find() lock contention
#13406 FreeBSD: use zero_region instead of allocating a dedicated page
Obtained from: OpenZFS
OpenZFS commit: c0cf6ed679
Update to the latest iwlwifi firmware based on
linux-firmware at b19cbdca78ab2adfd210c91be15a22568e8b8cae
(tag: 20220509)
and update firmware module Makefiles accordingly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import code update from iwlwifi-next
at e89600ebeeb14d18c0b062837a84196f72542830.
This amongst other things removes the deprecated BCAST_FILTERING option,
which we had disabled before due to firmware issues.
Also prepares us for the next firmware update.
The "enable_ini" module option has become an integer with a
sysctl proc equivalent handler. Disable the module parameter changing
for the moment until we'll have working LinuxKPI support or implement
it as SYSCTL_PROC in FreeBSD directly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
To avoid annoyng messages from glibc-2.35 test suite add the simple
implementation of rseq syscall which is do nothing for now.
I plan to implement it if and when the API stabilizes.
MFC after: 2 weeks
Firmware version 9.9.11 added support for hw_scan and is reportedly
causing more problems than 9.9.10 does. Until we get a chance to
test this out downgrade the firmware in order to help people testing
more.
Sponsored by: The FreeBSD Foundation
PR: 248235
MFC after: 2 days
X-MFC: just to get the reminder with the original commit
X-MFC with: 73d4ebea35
FSE_createCTable raises the warning because we stub out malloc() to
NULL in the kernel, so the passed in size is unused.
ZSTD_seqDecompressedSize has a variable whose value is only used in
assertions.
NB: These files are missing corresponding entries in sys/conf/files.
miivar.h includes opt_platform.h. Make sure all the drivers that use the
miibus_if.h interface file have opt_platform.h as well. While some of
these may not, strictly speaking, need it, it's easier to include it
universally for miibus.
Sponsored by: Netflix
As of today, using 'kldload miibus' is not equivalent to using 'device
miibus' in a kernel config. Newly introduced PHY drivers (DP83822,
DP83867, VSCPHY) and source files/PHY driver for FDT-enabled kernels
are missing. Without including them, kernel modules using any function
from dev/mii/mii_fdt.c refuse to load. Additionally, miivar.h directly
includes opt_platform.h.
Add the missing sources to the module build, with the FDT-only files
gated behind an OPT_FDT check. Maintain the alphabetical listing of
SRCS, but move the required header files to a separate line to improve
readability.
Reviewed by: mhorne, mindal@semihalf.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34256
For development, building a driver as kernel module is both convenient
and a time saver (no need for reboot on some change, testing it requires
just kldunload and kldload, a matter of seconds). For some special
cases, it may be even desirable to postpone initializing the network
interface after some action is done (loading a FPGA bitstream may be
required for Zynq/ZynqMP based hardware as an example).
Building is limited to ARM, ARM64 and RISC-V architectures (for Zynq,
ZynqMP, PolarFire Soc based boards, and HiFive based boards are known to
use CGEM at the moment).
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34687
Add man pages for rtw88 and rtw88fw. Install a copy of the firmware
license file and hook up the driver and firmware modules to the build.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Relnotes: yes
Import the most recent versions of the firmware images for the
rtw88 driver.
This is based on linux-firmware at 681281e49fb6778831370e5d94e6e1d97f0752d6.
The license of the firmware matches the previous rtwnfw(4) firmware
files (modulo a Copyright year) and you can find a copy in
sys/contrib/dev/rtw88fw/LICENCE.rtlwifi_firmware.txt.
Add build infrastructure to create the .ko files but do not yet hook
it up to the build until all parts are in the tree.
Approved by: core (imp)
MFC after: 2 weeks
Import rtw88 based on wireless-testing at
5d5d68bcff1f7ff27ba0b938a4df5849849b47e3 with adjustments for FreeBSD.
While our version of the driver has knowledge about the incapablity
of DMA above 4GB we do see errors if people have more than that
often already showing when laoding firmware.
The problem for that is currently believed to be outside this driver
so importing it anyway for now.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core (imp) [1]
MFC after: 2 weeks
Notable upstream pull request merges:
#9078: log xattr=sa create/remove/update to ZIL
#11919: Cross-platform xattr user namespace compatibility
#13014: Report dnodes with faulty bonuslen
#13016: FreeBSD: Fix zvol_cdev_open locking
#13019: spl: Don't check FreeBSD rwlocks for double initialization
#13027: Fix clearing set-uid and set-gid bits on a file when
replying a write
#13031: Add enumerated vdev names to 'zpool iostat -v' and
'zpool list -v'
#13074: Enable encrypted raw sending to pools with greater ashift
#13076: Receive checks should allow unencrypted child datasets
#13098: Avoid dirtying the final TXGs when exporting a pool
#13172: Fix ENOSPC when unlinking multiple files from full pool
Obtained from: OpenZFS
OpenZFS commit: a86e089415
- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024
Define NO_WUNUSED_BUT_SET_VARIABLE for newer clang, and use it in ATH_C
to account for different clang versions. Use it in Makefiles as well.
Sponsored by: Netflix
Reviewed by: kevans, jhb
Differential Revision: https://reviews.freebsd.org/D34408
The ath driver has a lot of these warnings. It's an older driver, so
just supress these warnings until they can be fixed. They are a mix of
simple dead stores, debubgging output and stuff that would require
careful study to know if its safe to remove the access or not (there are
likely very few of the latter, but if there are any they are latent bugs
that compiler could optimize away). Since I have no ath hardware to test
on anymore, take the conservative approach.
Sponsored by: Netflix
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
Update to the latest firmware based on
linux-firmware at c53073d4e1485ac9f7cb065db466793c495aead7
and update firmware module Makefiles accordingly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import new code from iwlwifi-next at cb0a1fb7fd86b0062692b5056ca8552906509512
(matching tag: iwlwifi-next-for-kalle-2022-02-18).
Also add files not previously imported because we are not yet compiling
them to ease updating and having them when needed.
This adds MEI (Management Engine) support upstream which we cannot import
(currently GPL-only) so we have stub functions for the missing bits.
This also reduces the diff to upstream. Changes submitted to avoid
problems with const and with void * arithmetics were merged.
In the module build Makefile disable CONFIG_IWLWIFI_OPMODE_MODULAR
as we are building iwlwifi as a single module.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
clang doesn't implement it, and Linux doesn't enforce it. As a
result, new instances keep cropping up both in FreeBSD's code and in
upstream sources from vendors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34144
A lot more generic cam related things were done in mmc_sim so this
simplifies the driver a lot.
Differential Revision: https://reviews.freebsd.org/D32154
Reviewed by: imp
GCC's -Wformat complains about NULL format strings passed to
iwl_fw_dbg_collect_trig (though the function handles NULL format
strings). Curious that upstream iwlwifi in Linux is built with GCC
and explicitly opts into this warning via the __printf() attribute.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D34146
TLS RX support is modeled after TLS TX support. The basic structures and layouts
are almost identical, except that the send tag created filters RX traffic and
not TX traffic.
The TLS RX tag keeps track of past TLS records up to a certain limit,
approximately 1 Gbyte of TCP data. TLS records of same length are joined
into a single database record.
Regularly the HW is queried for TLS RX progress information. The TCP sequence
number gotten from the HW is then matches against the database of TLS TCP
sequence number records and lengths. If a match is found a static params WQE
is queued on the IQ and the hardware should immediately resume decrypting TLS
data until the next non-sequential TCP packet arrives.
Offloading TLS RX data is supported for untagged, prio-tagged, and
regular VLAN traffic.
MFC after: 1 week
Sponsored by: NVIDIA Networking
This change adds convenience functions to setup a flow steering rule based on
a TCP socket. The helper function gets all the address information from the
socket and returns a steering rule, to be used with HW TLS RX offload.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Internal send queues are regular sendqueues which are reserved for WQE commands
towards the hardware and firmware. These queues typically carry resync
information for ongoing TLS RX connections and when changing schedule queues
for rate limited connections.
The internal queue, IQ, code is more or less a stripped down copy
of the existing SQ managing code with exception of:
1) An optional single segment memory buffer which can be read or
written as a whole by the hardware, may be provided.
2) An optional completion callback for all transmit operations, may
be provided.
3) Does not support mbufs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
This adds a wrapper around libsodium's curve25519 support matching
Linux's curve25519 API. The intended use case for this is WireGuard.
Note that this is not integrated with OCF as it is not related to
symmetric operations on data.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33935
Notable upstream pull request merges:
#12766 Fix error propagation from lzc_send_redacted
#12805 Updated the lz4 decompressor
#12851 FreeBSD: Provide correct file generation number
#12857 Verify dRAID empty sectors
#12874 FreeBSD: Update argument types for VOP_READDIR
#12896 Reduce number of arc_prune threads
#12934 FreeBSD: Fix zvol_*_open() locking
#12947 lz4: Cherrypick fix for CVE-2021-3520
#12961 FreeBSD: Fix leaked strings in libspl mnttab
#12964 Fix handling of errors from dmu_write_uio_dbuf() on FreeBSD
#12981 Introduce a flag to skip comparing the local mac when raw sending
#12985 Avoid memory allocations in the ARC eviction thread
Obtained from: OpenZFS
OpenZFS commit: 17b2ae0b24
This is a synchronous software API which wraps the existing software
implementation shared with OCF. Note that this will not currently
use optimized backends (such as ossl(4)) but may be appropriate for
operations on small buffers.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33524
This was added to 'device crypto' in the kernel in
bbb7a2c7c3 but was missing from the
module.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33522
The saf1761 OTG support was only for mips targets (BERI?). Retire it.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33706
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CHANGES
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Version : 1.26.6.0
Date : 01/03/2022
================================================================================
Fixes
-----
BASE:
- Fixed one module eeprom read failure.
- Fixed an issue with speed selection when 40G and 25G are advertised and
supported.
- Fixed a random traffic hang when T5 receives invalid ets BW in dcbx
messages from a switch.
- Fixed very long link up time with few switches.
================================================================================
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Always make ofw_bus_if.h. While it's only used when option FDT is in the
kernel, it can always be generated. In theory we could omit it if option
FDT isn't present, but none of the rest of sys/modules does that. That
fine-grained control likely won't be reliable w/o a redesign of the
kernel/module config system.
Sponsored by: Netflix
The firmware files for 3160, 7260, and 7265 imported contain old versions
no longer supported by the driver.
Replace with latest versions from linux-firmware to possibly also
support these chip revisions.
Reported by: FreeBSD User (freebsd walstatt-de.de) on wireless (2021-12-30)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Turn off broadcast filtering in iwlwifi for now as it gives me
or rather the firmware headaches.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
We do not generally protect the Makefiles like this.
Remove the details and go with project style.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
X-MFC with: bfcc09ddd4
X-MFC with: f4c129f5fb
Add 802.11 compat code for mac80211 and to a minimal degree cfg80211.
This allows us to compile and use basic functionality of wireless
drivers such as iwlwifi.
This is a constant work in progress but having it in the tree will
allow others to test and more easy to track changes and avoid having
snapshots no longer applying to branches.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import a netdevice update complementing the last remaining bits of
the old ifnet derived implementation. Along add a (for now) task
based NAPI implementation.
This is the minimal set of chnages which are needed for the initial
support of wireless drivers. The NAPI implementation has an option to
still switch to "direct dispatch" as it had been used by these drivers
before not relying on a deferred context along with some printf tracing.
This has been helpful in the last weeks for debugging and will be
cleaned once we have had broader testing and are sure this is fine as-is.
Should we need a more time-sensitive or load-sensitive response
in the future we can always switch to something more sophisticated.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
X-Differential Revision: D33075 (abandoned without feedback a while ago)
This is a work-in-progress implementation of sk_buff compat code
used for wireless drivers only currently.
Bring in this version of the code as it has proven to be good enough
to have packets going for a few months.
The current implementation has several drawbacks including the need
for us to copy data between sk_buffs and mbufs.
Do not rely on the internals of this implementation. They are highly
likely to change as we will improve the integration to FreeBSD mbufs.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Through fixes and improvements our ipfilter sources have diverged
enough to warrant move from contrib into sys/netpil. Now that I'm
planning on implementing MSS clamping as in iptables it makes more
sense to move ipfilter to netpfil.
This is the first of three commits the ipfilter move.
Suggested by glebius on two occaions.
Suggested by and discussed with: glebius
Reviewed by: glebius, kp (for #network)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33510
This matches the order used in sys/conf/files to make it easier to
keep these two files in sync.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33484
Remove more of the pccard infrasturcture. CardBus Yenta driver (cbb)
still references the remaining bits. It needs some additiona work to
remove 16-bit support still, so it remains.
Sponsored by: Netflix
