doesn't "fail", it may merely return garbage if it is not a valid ivar
for a given device. Our parent device must be a 'pcib' device, so we
can just assume it implements pcib IVARs, and all pcib devices have a
bus number.
Submitted by: clang via rdivacky
and can prevent kernel memory exhausting when big value is specified
from command line.
Split reading and writing operation to several iteration to do not
trigger KASSERT when data length is greater than MAXPHYS.
PR: kern/144962, kern/147851
MFC after: 2 weeks
1. Allow embedding the FDT into the kernel, just like PowerPC/book-E.
2. If the loader passes us a pointer to the bootinfo structure, save
it and use it to fill in the gaps (e.g. bus frequencies, etc).
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init(). Consistently define mem_range_softc from
mem.c for all platforms. Add missing #include guards for machine/memdev.h
and sys/memrange.h. Clean up some nearby style(9) nits.
MFC after: 1 month
TSB is located within the 32-bit address space, which held true as long as
we were using virtual addresses magic-mapped before the location of the
kernel for addressing it. However, with r216803 in place when possible we
address it via its physical address instead, which on machines like Sun Fire
V880 have no physical memory in the 32-bit address space at all requires
to use 64-bit addressing. When using physical addressing it still should
be safe to assume that we can just ignore the lowest 10 bits of the address
as a minor optimization as we did before r216803.
This fixes hostap mode for at least ral(4) and run(4), because there is
no sufficient call into drivers which could be used initialize the node
related ratectl variables.
MFC after: 3 days
GbE controllers. It seems these controllers no longer support
multi-fragmented RX buffers such that driver have to allocate
physically contiguous buffers.
o Retire RL_FLAG_NOJUMBO flag and introduce RL_FLAG_JUMBOV2 to
mark controllers that use new jumbo frame scheme.
o Configure PCIe max read request size to 4096 for standard frames
and reduce it to 512 for jumbo frames.
o TSO/checksum offloading is not supported for jumbo frames on
these controllers. Reflect it to ioctl handler and driver
initialization.
o Remove unused rl_stats_no_timeout in softc.
o Embed a pointer to structure rl_hwrev into softc to keep track
of controller MTU limitation and remove rl_hwrev in softc since
that information is available through a pointer to structure
rl_hwrev.
Special thanks to Realtek for donating sample hardwares which made
this possible.
H/W donated by: Realtek Semiconductor Corp.
assertion that is no longer required. Long ago, calls to vm_page_alloc()
from an interrupt handler had to specify VM_ALLOC_INTERRUPT so that
vm_page_alloc() would not attempt to reclaim a PQ_CACHE page from another vm
object. Today, with the synchronization on a vm object's collection of
PQ_CACHE pages, this is no longer an issue. In fact, VM_ALLOC_INTERRUPT now
reclaims PQ_CACHE pages just like VM_ALLOC_{NORMAL,SYSTEM}.
MFC after: 3 weeks
OBJT_PHYS objects. Thus, there is no need for handling them specially
in vm_fault(). In fact, this special case handling would have led to
an assertion failure just before the call to pmap_enter().
Reviewed by: kib@
MFC after: 6 weeks
signal to the master nfsd daemon whenever the stable restart
file has been modified. This will allow the master nfsd daemon
to maintain an up to date backup copy of the file. This is
enabled via the nfssvc() syscall, so that older nfsd daemons
will not be signaled.
Reviewed by: jhb
MFC after: 1 week
besides the duplex ones set so just comparing it with IFM_FDX may lead
to false negatives.
- Just let the default case handle all unsupported media types.
- In pnphy_status() don't unnecessarily read a register twice.
- Remove unnused macros.
MFC after: 1 week
configuration, which is used to work around issues with certain setups
(see r161237) by default, should not be triggered as it may in turn
cause harm in some edge cases.
- Even after masking the media with IFM_GMASK the result may have bits
besides the duplex ones set so just comparing it with IFM_FDX may lead
to false negatives.
- Announce PAUSE support also for manually selected 1000BASE-T, but for
all manually selected media types only in full-duplex mode. Announce
asymmetric PAUSE support only for manually selected 1000BASE-T.
- Simplify setting the manual configuration bits to only once after we
have figured them all out. This also means we no longer unnecessarily
update the hardware along the road.
- Remove a stale comment.
Reviewed by: yongari (plus additional testing)
MFC after: 3 days
besides the duplex ones set so just comparing it with IFM_FDX may lead
to false negatives.
- Simplify ciphy_service() to only set the manual configuration bits
once after we have figured them all out. This also means we no longer
unnecessarily update the hardware along the road.
MFC after: 1 week
complicates the code.
- Don't let atphy_setmedia() announce PAUSE support for half-duplex when
MIIF_FORCEPAUSE is set.
- Simplify e1000phy_service() and ip1000phy_service() to only set the
manual configuration bits once after we have figured them all out. For
ip1000phy_service() this also means we no longer unnecessarily update
the hardware along the road.
MFC after: 1 week
- Move the realtime priority range up above kernel sleep priorities and
just below interrupt thread priorities.
- Contract the interrupt and kernel sleep priority ranges a bit so that
the timesharing priority band can be increased. The new timeshare range
is now slightly larger than the old realtime + timeshare ranges.
- Change the ULE scheduler to no longer use realtime priorities for
interactive threads. Instead, the larger timeshare range is now split
into separate subranges for interactive and non-interactive ("batch")
threads. The end result is that interactive threads and non-interactive
threads still use the same priority ranges as before, but realtime
threads now have a separate, dedicated priority range.
- Do not modify the priority of non-timeshare threads in sched_sleep()
or via cv_broadcastpri(). Realtime and idle priority threads will
no longer have their priorities affected by sleeping in the kernel.
Reviewed by: jeff
started to execute, it seems that the corresponding ISR bit in the "old"
local APIC can be cleared. This causes the local APIC interrupt routine
to fail to find an interrupt to service. Rather than panic'ing in this
case, simply return from the interrupt without sending an EOI to the
local APIC. If there are any other pending interrupts in other ISR
registers, the local APIC will assert a new interrupt.
Tested by: steve
In n32 and n64, add support for physical address above 4GB by having
64 bit page table entries and physical addresses. Major changes are:
- param.h: update PTE sizes, masks and shift values to support 64 bit PTEs.
- param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as
ptoa), and reformat.
- param.h: remove casting to unsigned long in trunc_page and round_page
since this will be used on physical addresses.
- _types.h: have 64 bit __vm_paddr_t for n32.
- pte.h: update TLB LO0/1 access macros to support 64 bit PTE
- pte.h: assembly macros for PTE operations.
- proc.h: md_upte is now 64 bit for n32 and n64.
- exception.S and swtch.S: use the new PTE macros for PTE operations.
- cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64.
- xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are
supported now.
Reviewed by: jmallett (earlier version)
the lock instead of queueing it to a task.
- Do not invoke jme_rxintr() to reclaim any unprocessed but received
packets when shutting down the interface. Instead, just drop these
packets to match the behavior of other drivers.
- Hold the driver lock in the interrupt handler to avoid races with
ioctl requests to down the interface.
Reviewed by: yongari
interactive timeshare threads (PRI_*_INTERACTIVE) and non-interactive
timeshare threads (PRI_*_BATCH) and use these instead of PRI_*_REALTIME
and PRI_*_TIMESHARE. No functional change.
Reviewed by: jeff
1. Use vm_paddr_t for physical addresses.
There are a few places in the MIPS platform code where vm_offset_t is
used for physical addresses, change these to use vm_paddr_t:
- phys_avail[], physmem_desc[] arrays
- pmap_mapdev(), page_is_managed(), is_cacheable_mem() pmap_map() args
- local variables of various pmap functions
2. Change init_pte_prot() return from int to pt_entry_t, as this can be
64 bit when using 64 bit TLB entries.
3. Update printing of pt_entry_t and of vm_paddr_t to use 'j' format with
uintmax_t. This will be useful later if we plan to use 64bit phsical addr
on 32 bit n32 compilation.
Reviewed by: imp
bus_size_t may be 32 or 64 bits. Change the bounce_zone alignment field
to explicitly be 32 bits, as I can't really imagine a DMA device that
needs anything close to 2GB alignment of data.
packets.
*) Reject requests with a protocol length not equal to 4. This is IPv4
and there is no reason to accept anything else.
*) Reject packets that have a multicast source hardware address.
*) Drop requests where the hardware address length is not equal
to the hardware address length of the interface.
Pointed out by: Rozhuk Ivan
MFC after: 1 week
The code is turned off until the tree is fixed up so it compiles.
__FreeBSD_version was already bumped once today, so skip the bump, but
add an entry to UPDATING.
Note that __DESCR() is used in the SYSCTL_OID() macro and so is not
needed in macros that invoke it. This use was inconsistent in the
file and I have made it consistent any lines already being changed.
Reviewed by: bde (previous version), -arch (previous version)
dialog is distributed from GPLv2 to LGPLv2 and introduces a number of new
features and a new and better libdialog API. The existing libdialog will
be kept temporarily as libodialog for compatibility purposes until sade,
sysinstall and tzsetup have been either updated or replaced.
__FreeBSD_version is now 900030.
Discussed on: -current
Approved by: core
Obtained from: http://invisible-island.net/dialog
the ones which run the message ring handler.
Some bits of the interrupt mask are part of the status register which is
saved with the process context, and these bits are initialized from the
cpu on which the process is created. This means that all the processes
should have the same value for these interrupt mask bits, so that the
interrupt mask remains the same regardless of what thread is scheduled
on the cpu.
Submitted by: Sriram Gorti (srgorti at netlogicmicro dot com)
limit maximum RX buffer size to RE_RX_DESC_BUFLEN instead of
blindly configuring it to 16KB. Due to lack of documentation, re(4)
didn't allow jumbo frame on these controllers. However it seems
controller is confused with jumbo frame such that it can DMA the
received frame to wrong address instead of splitting it into
multiple RX buffers. Of course, this caused panic.
Since re(4) does not support jumbo frames on these controllers,
make controller drop frame that is longer than RE_RX_DESC_BUFLEN
sized frame. Fortunately RTL810x controllers, which do not support
jumbo frame, have no such issues but this change also limited
maximum RX buffer size allowed to RTL810x controllers. Allowing
16KB RX buffer for controllers that have no such capability is
meaningless.
MFC after: 3 days
- failure code in em_xmit got mangled along the way
and was not properly handling errors.
- local timer code had a leftover UNLOCK call that
should be removed.
MFC after 3 days
PI_DISKLOW. While here, rename PI_TTYLOW to PI_TTY.
- Add a macro PI_SWI() that takes a SWI_* constant as an argument and
returns the suitable thread priority.
the pwm values. We can now set the fan's speed of a PWM controlled fan
with % numbers between 30 and 100 % instead of trying to model a
% number based on rpm.
The fcu chip offers both, the dutycycle and the rpm value of the PWM
controlled fans. I added the rpm value to the list of information
available via sysctl(8).
Tested by: Paul Mather <paul at gromit dlib vt edu>
Approved by: nwhitehorn (mentor)
and just show old (cached) values. Controller will not respond to
the command unless MAC is enabled so DUMP request for down
interface caused request timeout.
RealTek changed TX descriptor format for later controllers so these
controllers require MSS configuration in different location of TX
descriptor. TSO is enabled by default for controllers that use new
descriptor format.
For old controllers, TSO is still disabled by default due to broken
frames under certain conditions but users can enable it.
Special thanks to Hayes Wang at RealTek.
MFC after: 2 weeks
These controllers consist of two Marvell 88SE9128 6Gbps SATA chips and
PLX PCIe bridge. As result, they seem to be agree to work with ahci(4)
as usual HBAs. The only noticed issue is that RAID BIOS disables all
drive caches during boot, though `camcontrol cmd ...` is able to fix that.
Those who wants RAID functionality can still use closed proprietary driver
from HighPoint site.
MFC after: 1 week
erroneously, assumed that 4 bytes of data were in the first
mbuf of a list by replacing the bcopy() with m_copydata().
Also, replace the uses of m_pullup(), which can fail for
reasons other than not enough data, with m_copydata().
For the cases where it isn't known that there is enough
data in the mbuf list, check first via m_len and m_length().
This is believed to fix a problem reported by dpd at dpdtech.com
and george+freebsd at m5p.com.
Reviewed by: jhb
MFC after: 8 days
accurate. <sys/linker_set.h> is one of the very few headers similar to
<sys/queue.h> for which nested includes is allowed.
PR: docs/153654
Reviewed by: bde
MFC after: 1 month
install or remove non-SCI interrupt handlers per ACPI Component Architecture
User Guide and Programmer Reference. ACPICA may install such interrupt
handler when a GPE block device is found, for example. Add a wrapper for
ACPI_OSD_HANDLER, convert its return values to ours, and make it a filter.
Prefer KASSERT(9) over panic(9) as we have never seen those in reality.
Clean up some style(9) nits and add my copyright.
DMA boundary bug and runs with PCI-X mode. watchdog timeout was
observed on BCM5704 which lives behind certain PCI-X bridge(e.g.
AMD 8131 PCI-X bridge). It's still not clear whether the root
cause came from that PCI-X bridge or not. The watchdog timeout
indicates the issue is in TX path. If the bridge reorders TX
mailbox write accesses it would generate all kinds of problems but
I'm not sure. This should be revisited.
Tested by: Michael L. Squires (mikes <> siralan dot org)
issue seen on PCIX BCM5704 controller. r216970 fixed the issue but
the DMA address space restriction was applied to all bge(4)
controllers such that it caused unnecessary performance degradation
for controllers that have no such issues.
o) Clear/acknowledge receive interrupt at end of thread. This gives the
management interfaces performance on the order of 100Mbps rather than
the previous level of 10Mbps on my MR-730.
hint is 0 when no SACK data is received to update the hint with. This was
accidentally omitted from r216753.
Sponsored by: FreeBSD Foundation
MFC after: 10 weeks
X-MFC with: 216753
o) Add 'octm', a trivial driver for the 10/100 management ports found on some
Octeon systems.
o) Make the Simple Executive's management port helper routines compile on
FreeBSD (namely by not doing math on void pointers.)
o) Add a cvmx_mgmt_port_sendm routine to the Simple Executive to send an mbuf
so there is only one copy in the transmit path, rather than having to first
copy the mbuf to an intermediate buffer and then copy that to the Simple
Executive's transmit ring.
o) Properly work out MII addresses of management ports on the Lanner MR-730.
XXX The MR-730 also needs some patches to the MII read/write routines, but
this is sufficient for now. Media detection will be fixed in the future
when I can spend more time reading the vendor-supplied patches.
quite awful, because e.g. 4 packets will come in and get processed on 4
different cores at the same time, really battling with the TCP stack quite
painfully. For now, just run one task at a time.
This gets performance up in most cases to where it was before the correctness
fixes that got interrupts to run on all cores (except in high-load TCP transmit
cases where all we're handling receive for is ACKs) and in some cases it's
better now. What would be ideal would be to use a more advanced interrupt
mitigation strategy and possibly to use different workqueue groups per port for
multi-port systems, and so on, but this is a fine stopgap.
all new devices added between our r211022 and their git revision
93ad03d60b5b18897030038234aa2ebae8234748
Also correct a Foxconn entry.
MFC after: 1 week
manner analogous to r216633 for the regular server. This
change busies the file system so that VFS_VGET() is
guaranteed to be using the correct mount point even
during a forced dismount attempt. Since nfsd_fhtovp() is
not called immediately before readdirplus, the patch is
actually a clone of pjd@'s nfs_serv.c.4.patch instead of
the one committed in r216633.
Reviewed by: kib
MFC after: 10 days
these variables represent sizes in one capacity or another. There is
no reason to allow negative numbers. Change userspace shared structure
elements that get used for the modified functions from int to uint32_t,
since it's not clear what userspace programs use these fields, and we
do not want to break binary compatibility. This fixes a panic when
corrupt or bogus data is passed into the kernel.
Obtained from: NetBSD
MFC after: 3 weeks
need it anymore. Moreover, its implementation had a type mismatch, a
long is not necessarily an uint64_t. (This mismatch was hidden by
casting.) Move the remaining two counters up a level in the sysctl
hierarchy. There is no reason for them to be under the vm.pmap node.
Reviewed by: kib
an unbound socket, regardless of any multicast options.
If an address is specified via a multicast option, then
let it override normal the source address selection.
This fixes a bug where source address selection was
not being performed when multicast options were present
but without an interface being specified.
Reviewed by: bz
MFC after: 1 day
That revision is introducing a bug which is more visible than problems
it is trying to fix.
As long as my time is very limited in this period I am going to
commit back this patch just once it is fully fixed.
Reported by: dim, Nicholas Esborn
and pointers don't always have the same size, e.g. the __mips_n32 ABI
(ILP32) has 64 bit registers but 32 bit pointers.
On mips introduce PRIptr to fix the format specifier for (u)intptr_t.
Prefix PRI64 and PRIptr with underscores because macro names starting with
PRI[a-zX] are reserved for future use.
Approved by: kib (mentor)
by kernel, and parse PT_GNU_STACK phdr from linked and loaded dsos.
If the loaded dso requires executable stack, as specified by PF_X bit
of p_flags of PT_GNU_STACK phdr, but current stack protection does not
permit execution, the __pthread_map_stacks_exec symbol is looked up
and called. It should be implemented in libc or threading library and
change the protection mode of all thread stacks to be executable.
Provide a private interface _rtld_get_stack_prot() to export the stack
access mode as calculated by rtld.
Reviewed by: kan
PT_GNU_STACK program header, if present and enabled. Two new sysctls
are provided, kern.elf32.nxstack and kern.elf64.nxstack, that allow to
enable PT_GNU_STACK for ABIs of specified bitsize, if ABI decided to
support shared page.
Inform rtld about access mode of the stack initial mapping by
AT_STACKPROT aux vector.
At the moment, the default is disabled, waiting for the usermode
support bits.
setting SV_SHP flag and providing pointer to the vm object and mapping
address. Provide simple allocator to carve space in the page, tailored
to put the code with alignment restrictions.
Enable shared page use for amd64, both native and 32bit FreeBSD
binaries. Page is private mapped at the top of the user address
space, moving a start of the stack one page down. Move signal
trampoline code from the top of the stack to the shared page.
Reviewed by: alc
architecture macros (__mips_n64, __powerpc64__) when 64 bit types (and
corresponding macros) are different from 32 bit. [1]
Correct the type of INT64_MIN, INT64_MAX and UINT64_MAX.
Define (U)INTMAX_C as an alias for (U)INT64_C matching the type definition
for (u)intmax_t. Do this on all architectures for consistency.
Suggested by: bde [1]
Approved by: kib (mentor)
of (unsigned) int __attribute__((__mode__(__DI__))). This aligns better
with macros such as (U)INT64_C, (U)INT64_MAX, etc. which assume (u)int64_t
has type (unsigned) long long.
The mode attribute was used because long long wasn't standardised until
C99. Nowadays compilers should support long long and use of the mode
attribute is discouraged according to GCC Internals documentation.
The type definition has to be marked with __extension__ to support
compilation with "-std=c89 -pedantic".
Discussed with: bde
Approved by: kib (mentor)
On some architectures UCHAR_MAX and USHRT_MAX had type unsigned int.
However, lacking integer suffixes for types smaller than int, their type
should correspond to that of an object of type unsigned char (or short)
when used in an expression with objects of type int. In that case unsigned
char (short) are promoted to int (i.e. signed) so the type of UCHAR_MAX and
USHRT_MAX should also be int.
Where MIN/MAX constants implicitly have the correct type the suffix has
been removed.
While here, correct some comments.
Reviewed by: bde
Approved by: kib (mentor)
It was used mainly to discover and fix some 64-bit portability problems
before 64-bit arches were widely available.
Discussed with: bde
Approved by: kib (mentor)
was specified incorrectly, causing the bzero to run past the end of a
malloc(9)'d object.
Submitted by: Eric Youngblut < eyoungblut AT isilon DOT com >
MFC after: 3 days
to match the desired priority in td_priority. Otherwise the first time
thread0 used a borrowed priority it would drop down to PUSER instead of
PVM.
- Explicitly initialize the starting priority of new kprocs to PVM to
avoid inheriting some random priority from thread0.
MFC after: 2 weeks
thread and proc have been copied and zeroed from the old thread and
proc. Otherwise attempts to modify thread or process data in sched_fork()
could be undone.
- Don't copy td_{base,}_user_pri from the old thread to the new thread in
sched_fork_thread() in ULE. This is already done courtesy the bcopy()
of the thread copy region.
- Always initialize the real priority (td_priority) of new threads to the
new thread's base priority (td_base_pri) to avoid bogusly inheriting a
borrowed priority from the parent thread.
MFC after: 2 weeks
This was lost when it was converted to using a condition variable instead
of lbolt.
- Drop the priority of flowtable down to PPAUSE when it is idle as well
since it is a similar background task.
MFC after: 2 weeks
obscured vn_start_write() and vn_finished_write() for the
old OpenBSD port, since most uses have been replaced by the
correct calls.
MFC after: 12 days
server is broken and the major file systems are now all
mpsafe, modify the server so that it will only export
mpsafe file systems. This was discussed on freebsd-fs@
and removes a fair bit of crufty code.
MFC after: 12 days
available on firmwares 3.15 and earlier.
Caveats: Support for the internal SATA controller is currently missing,
as is support for framebuffer resolutions other than 720x480. These
deficiencies will be remedied soon.
Special thanks to Peter Grehan for providing the hardware that made this
port possible, and thanks to Geoff Levand of Sony Computer Entertainment
for advice on the LV1 hypervisor.
quite right and hasn't been used in ages and is likely broken. QEMU
with GUMSTIX is a more promising road to FreeBSD/arm in emulation
anyway.
Reviewed by: cognet@
length to ofw_real_map in case of a null string.
This makes ofwdump(8) work correctly when trying to print all properties
with ofwdump -p.
Approved by: nwhitehorn (mentor)
vn_start_write() with a non-NULL vp. That way it will
find the correct mount point mp and use that mp for the
subsequent vn_finished_write() call. Also, it should fail
without crashing if the mount point is being forced dismounted
because vn_start_write() will set the mp NULL via VOP_GETWRITEMOUNT().
Reviewed by: kib
MFC after: 12 days
of vfs_getvfs() so that the mount point is busied for the
VFS_FHTOVP() call. This is analagous to r185432 for the
regular NFS server.
Reviewed by: kib
MFC after: 12 days
counterpart also takes, i.e. "fdx" for "full-duplex", "flow" for
"flowcontrol", "hdx" for "half-duplex" as well as "loop" and "loopback"
for "hw-loopback".
MFC after: 1 week
the dependency of which was preloaded, but failed to initialize. Previously,
kernel dereferenced NULL pointer returned by modlist_lookup2(); now, when this
happens, we unload the dependent module. Since the depended_files list is
sorted in dependency order, this properly propagates, unloading modules that
depend on failed ones.
From the user point of view, this prevents the kernel from panicing when
trying to boot kernel compiled without KDTRACE_HOOKS with dtraceall_load="YES"
in /boot/loader.conf.
Reviewed by: kib
The macros here for generating coprocessor 0 accessors are named like:
MIPS_RDRW32_COP0
That macro would produce mips_rd_<register>() and mips_wr_<register>()
inlines to access the specified register by name from C. The problem is that
the R and the W were swapped in the macros originally; it was meant to be named
RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead
spelled RDRW, which nobody should be expected to get right by anything other
than copy and paste.
It's too many consonants in a row to keep straight anyway, so just prefer e.g.:
MIPS_RW32_COP0
While here, add a missing #undef.
