If port resume fails, likely the USB device is detached. Ignore such errors,
because else the USB stack might try forever trying to resume the device,
before it will proceed detaching it.
MFC after: 1 week
Sponsored by: NVIDIA Networking
The USB controller drivers assume they can cast a NULL pointer to a
struct and find the address of a member. KUBSan complains about this so
replace with the __offsetof and __containerof macros that use either a
builtin function where available, or the same NULL pointer on older
compilers without the builtin.
Reviewers: hselasky
Subscribers: imp
Reviewed by: hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33865
The saf1761 OTG support was only for mips targets (BERI?). Retire it.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33706
Now that we have proper 32-bit compat support, remove COMPAT_32BIT
ifdefs to allow 32-bit code to use the 64-bit layout of USB ioctl
structs and struct usb_fs_endpoint.
This includes the removal of redundant alignment directives that had
no effect in practice.
Reviewed by: hselasky, jrtc27 (prior version)
Unlike most 32-bit compatability code, this isn't just a simple thunk
in the ioctl code. An ioctl (USB_FS_INIT) is used to install a
pointer to an array of usb_fs_endpoint structs which are then used
by the ugen fifo code. These struct contains an array of pointers
which requires translation. We change the interfaces around
struct usb_fs_endpoint as follows:
- We store the size of struct usb_fs_endpoint in struct usb_fifo
in the USB_FS_INIT handler so we know the ABI of the userspace
array.
- APIs to manipulate userspace struct usb_fs_endpoint objects now
take a struct usb_fifo and an index rather than a pointer to
the object. This allows most code to remain oblivious to the
different struct usb_fs_endpoint sizes.
- Add ugen_fs_copyin() which copies the struct usb_fs_endpoint
from userspace, thunking it to the native size if required.
- Uses of struct usb_fs_endpoint's ppBuffer member are now
via ugen_fs_getbuffer() which produces a native pointer.
- Updates to userspace are now handled by ugen_fs_update().
For clarity, single, fixed-sized members now are accessed with
fueword/suword rather than copyin/copyout.
Reviewed by: hselasky, jrtc27 (prior version)
Use thunks or alternative access methods to support ioctls without
the COMPAT_32BIT hacks that store pointers in uint64_t's on 32-bit
platforms. This should allow a normal i386 libusb to work.
On CheriBSD, the sizes of the structs will differ between CheriABI
(the default) and freebsd64 no matter what so we need proper compat
support there. This change paves the way.
Reviewed by: hselasky, jrtc27 (prior version)
Create a wrapper for newbus to take giant and for busses to take it too.
bus_topo_lock() should be called before interacting with newbus routines
and unlocked with bus_topo_unlock(). If you need the topology lock for
some reason, bus_topo_mtx() will provide that.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D31831
Seems like a copy-paste error, or at least this made more sense when the
sio(4) driver still existed. This modifies the debug port name displayed
at boot, but otherwise has no functional change.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33278
According to information found on the internet the following products
use exactly the same hardware but probably different USB IDs:
- Edimax EW-7811Un V2 (v2)
- Edimax EW-7811GLN 2.0A (v2)
I am not adding them as I cannot verify.
PR: 254280
MFC after: 1 week
Add support for the "snps,dis_rxdet_inp3_quirk" quirk needed
at least on SolidRun's HoneyComb.
Reviewed by: manu, mw
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32921
Currently, to support 64-byte contexts, xhci_ctx_[gs]et_le(32|64) take a
pointer to the field within a 32-byte context and, if 64-byte contexts
are in use, compute where the 64-byte context field is and use that
instead by deriving a pointer from the 32-byte field pointer. This is
done by exploiting a combination of 64-byte contexts being the same
layout as their 32-byte counterparts, just with 32 bytes of padding at
the end, and that all individual contexts are either in a device
context or an input context which itself is page-aligned. By masking out
the low 4 bits (which is the offset of the field within the 32-byte
contxt) of the offset within the page, the offset of the invididual
context within the containing device/input context can be determined,
which is itself 32 times the number of preceding contexts. Thus, adding
this value to the pointer again gets 64 times the number of preceding
contexts plus the field offset, which gives the offset of the 64-byte
context plus the field offset, which is the address of the field in the
64-byte context.
However, this involves a fair amount of lying to the compiler when
constructing these intermediate pointers, and is rather difficult to
reason about. In particular, this is problematic for CHERI, where we
compile the kernel with subobject bounds enabled; that is, unless
annotated to opt out (e.g. for C struct inheritance reasons where you
need to be able to downcast, or containerof idioms), a pointer to a
member of a struct is a capability whose bounds only cover that field,
and any attempt to dereference outside those bounds will fault,
protecting against intra-object buffer overflows. Thus the pointer given
to xhci_ctx_[gs]et_le(32|64) is a capability whose bounds only cover the
field in the 32-byte context, and computing the pointer to the 64-byte
context field takes the address out of bounds, resulting in a fault when
later dereferenced.
This can be cleaned up by using a different abstraction. Instead of
doing the 32-byte to 64-byte conversion on access to the field, we can
do the conversion when getting a pointer to the context itself, and
define proper 64-byte versions of contexts in order to let the compiler
do all the necessary arithmetic rather than do it manually ourselves.
This provides a cleaner implementation, works for CHERI and may even be
slightly more performant as it avoids the need to mess with masking
pointers (which cannot in the general case be optimised by compilers to
be reused across accesses to different fields within the same context,
since it does not know that the contexts are over-aligned compared with
the C ABI requirements).
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D32554
When EVDEV_SUPPORT was introduced, the USB transfers may be running
after the main FIFO is closed. In connection to this a race may appear
which can lead to use-after-free scenarios. Fix this for all FIFO
consumers by initializing and resetting the FIFO queues under the
lock used by the client. Then the client driver will see an empty
queue in all cases a race may appear.
Found by: pho@
MFC after: 1 week
Sponsored by: NVIDIA Networking
While IEEE80211_R_BAND was defined, there was no place to store the
band. Add a field for that, adjust ieee80211_lookup_channel_rxstatus()
to require it, and update drivers passing "R_{FREQ|IEEE}" in already to
provide the band as well. For the moment keep the fall-back code
requiring all three fields.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D30662
Change the probe return value from BUS_PROBE_DEFAULT to BUS_PROBE_GENERIC
given this is the "generic" attach method. This allows individual
drivers using XHCI generic but needing their own intialisation to
gain priority for attaching over the generic implementation.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D32257
When a usb device is detached, usb_pc_dmamap_destroy() called
bus_dmamap_destroy() while the map was still loaded. That's harmless on x86
architectures, but on all other platforms it causes bus_dmamap_destroy() to
return EBUSY and leak away any memory resources (including bounce buffers)
associated with the mapping, as well as any allocated map structure itself.
This change introduces a new is_loaded flag to the usb_page_cache struct to
track whether a map is loaded or not. If the map is loaded,
bus_dmamap_unload() is called before bus_dmamap_destroy() to avoid leaking
away resources.
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D32208
We can now set promisc and allmulti modes.
Filtering of given multicast addresses is not supported.
Changing the mode is done by sending a command described in:
"USB CDC Subclass Specification for Ethernet Devices v1.2, section 6.2.4".
This means that at least in theory this feature should work with all
modems that are using this driver.
This fixes Huawei E3372h-320 running new firmware in "HiLink" mode.
Previously it would reset a few seconds after its mode was changed
with "usb_modeswitch".
Setting RX filter to default value at the end of attach function
fixed that.
Sponsored by: Stormshield
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D31766
MFC after: 2 weeks
Reviewed by: hps
After switching the dongle to the Huawei alternate mode(modem mode)
with usb_modeswitch the serial interfaces had all of their ids set to
0xFF.
After modifying umodem to work with that it attached successfully and
I've managed to configure device with standard AT commands to get
internet connection.
folder, only keeping the zero length packet API introduced in sys/dev/usb
after more reports of USB serial devices not supporting ZLPs.
Reported by: mav@
MFC after: 1 week
Sponsored by: NVIDIA Networking
port devices. If it gets eaten it is fine. Many USB device side implementations
don't properly support the clear endpoint halt command and if they do, data is lost
because the transmit FIFO is typically reset when this command is received.
Tested by: jmg
MFC after: 1 week
Sponsored by: NVIDIA Networking
