offline in response to a INQUIRY command that does not retreive vital
product data(I personally have observed the behaviour on an Adaptec 2405
and a 5805). Force the peripheral qualifier to "connected" so that upper
layers correctly recognize that a disk is present.
This bug was uncovered by r216236. Prior to that fix, aac(4) was
accidentally clearing the peripheral qualifier for all inquiry commands.
This fixes an issue where passthrough devices were not created for
disks behind aac(4) controllers suffering from the bug. I have
verified that if a disk is not present that we still properly detect
that and not create the passthrough device.
Sponsored by: Sandvine Incorporated
MFC after: 1 week
as controlled by kern.random.sys.harvest.swi. SWI harvesting feeds into
the interrupt FIFO and each event is estimated as providing a single bit of
entropy.
Reviewed by: markm, obrien
MFC after: 2 weeks
LUNs respectively. This removes a huge number of error messages
from CAM during bus scans.
Copied almost verbatim from mav's commit r237460.
Submitted by: Mike Tancsa <mike at sentex dot net>
MFC after: 3 days
immediately panics on boot with INVARIANTS enabled. The driver already
clearly expects to be able to recurse on this mutex - the main I/O
is always recursing on this lock.
Reported and tested by: Mike Tancsa <mike at sentex dot net>
MFC after: 1 week
This should eventually be unified with ATH_DEBUG() so I can get both
from one macro; that may take some time.
Add some new probes for TX and TX completion.
* use the correct frame status - although the completion descriptor is
the _last_ in the frame/aggregate, the status is currently stored in
the _first_ buffer.
* Print out ath_buf specific fields once, not per descriptor in an ath_buf.
at r230551.
Also while there, make sense polling use reported for each node separately
instead of reporting accumulated total status.
Submitted by: Barbara <barbara.freebsd@gmail.com> (1)
MFC after: 3 days
it's disabled.
The previous commit to enable CLRDMASK setting didn't do it at all
correctly for non-aggregate sessions - so the CLRDMASK bit would be
cleared and never re-set.
* move ath_tx_update_clrdmask() to be called by functions that setup
descriptors and queue frames to the hardware, rather than scattered
everywhere.
* Force CLRDMASK to be set on all non-aggregate session frames being
transmitted.
* Use ath_tx_normal_comp() now on non-aggregate sessoin frames
that are queued via ath_tx_xmit_normal(). That way the TID hwq is
updated and they can trigger (eventual) filter frame queue resets
and software retransmits.
There's still a bit more work to do in this area to reverse the silly
short-sightedness on my part, however it's likely going to be better
to fix this now than just reverting the patch.
Thanks to people on the freebsd-wireless@ mailing list for promptly
pointing this out.
The following change caused rpc.lockd to exit after startup:
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the
same way.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
adapter->dropped_pkts instead of if_ierrors because if_ierrors is
overwritten by hw stats collection.
Submitted by: Andrew Boyer <aboyer@averesystems.com>
Reviewed by: Jack F Vogel <jfv@freebsd.org>
MFC after: 2 weeks
doesn't exist on a dataset we are starting from. For example if we
have the following configuration:
tank
tank/foo
tank/foo@snap
tank/bar
tank/bar@snap
We can execute:
# zfs destroy -t tank@snap
eventhough tank@snap doesn't exit.
Unfortunately it is not possible to do the same with recursive rename:
# zfs rename -r tank@snap tank@pans
cannot open 'tank@snap': dataset does not exist
...until now. This change allows to recursively rename snapshots even if
snapshot doesn't exist on the starting dataset.
Sponsored by: rsync.net
MFC after: 2 weeks
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.
Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).
There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.
Sponsored by: multiplay.co.uk
This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.
Obtained from: zfsonlinux
Submitted by: Etienne Dechamps <etienne.dechamps@ovh.net>
queues lock is acquired before the page lock is released, there is no
guarantee that the page will still be in that same page queue when
vm_page_requeue() is called.
Reported by: pho
In collaboration with: kib
MFC after: 3 days
gone rule. Optimise use of channels so that when a channel
is not ready another channel is used. Instead of using the SOF interrupt
use the system timer to drive the host statemachine. This might
give lower throughput and higher latency, but reduces the CPU usage
significantly. The DWC OTG host mode support should not be considered
for serious USB host controller applications. Some problems are still
seen with LOW speed USB devices.
Commit changes missed from r237435. Properly calculate the signal
trampoline addresses after the shared page is enabled. Handle FreeBSD
ABIs without shared page support too.
MFi386: revision 238792
Introduce curpcb magic variable.
Do this by checking if spa_namespace_lock is already held and not taking
it again in that case.
Add a comment explaining why that is done and why it is safe.
Reviewed by: pjd
MFC after: 24 days
It is possible that provider is destroyed while we are iterating over the
list.
Reported by: Brian Parkison <parkison@panzura.com>
Discussed with: phk
MFC after: 1 week
slot. This eventually results in exhaustion of the tid space, causing
new threads get tid -1 as identifier.
The bad effect of having the thread id equal to -1 is that
UMTX_OP_UMUTEX_WAIT returns EFAULT for a lock owned by such thread,
because casuword cannot distinguish between literal value -1 read from
the address and -1 returned as an indication of faulted
access. _thr_umutex_lock() helper from libthr does not check for
errors from _umtx_op_err(2), causing an infinite loop in
mutex_lock_sleep().
We observed the JVM processes hanging and consuming enormous amount of
system time on machines with approximately 100 days uptime.
Reported by: Mykola Dzham <freebsd levsha org ua>
MFC after: 1 week
we are actually editing table, which means editing rules,
thus we need writer access to 'em.
Fix this by offloading the update of table to the same taskqueue,
we already use for flushing. Since taskqueues major task is now
overloading, and flushing is optional, do mechanical rename
s/flush/overload/ in the code related to the taskqueue.
Since overloading tasks do unsafe referencing of rules, provide
a bandaid in pf_purge_unlinked_rules(). If the latter sees any
queued tasks, then it skips purging for this run.
In table code:
- Assert any lock in pfr_lookup_addr().
- Assert writer lock in pfr_route_kentry().
there is no need to release and reacquire the pmap and pvh global locks
around calls to uma_zfree(). Recursion into the pmap simply won't occur.
Eliminate the use of M_USE_RESERVE. It is deprecated and, in fact, counter-
productive, meaning that it actually makes the memory allocation request
more likely to fail.
Eliminate the macros pmap_{alloc,free}_l2_dtable(). They are of limited
utility, and pmap_free_l2_dtable() was inconsistently used.
Tidy up pmap_init(). In particular, change the initialization of the PV
zone so that it doesn't span the initialization of the l2 and l2table zones.
Tested by: jmg
On single core devices set_stackptrs is only ever called with cpu = 0 in
initarm and will be identical to the existing function. On SMP this needs
to be implemented for sys/arm/mp_machdep.c, but the implementations are
identical for each SoC.
is performed on the vnode mapping which is wired in other address space.
While there, explicitely assert that the page is unwired and zero the
wire_count instead of substract. The condition is rechecked later in
vm_page_free(_toq) already.
Reported and tested by: zont
Reviewed by: alc (previous version)
MFC after: 1 week
frames to occur.
* Create a new function which will set the bf_flags CLRDMASK bit
if required.
* For raw frames, always set CLRDMASK.
* For BAR, ADDBA frames, always set CLRDMASK.
* For everything else, check if CLRDMASK needs to be set before
calling tx_setds() or tx_setds11n().
* When unpausing a queue or drain/resetting it, set tid->clrdmask=1
just to ensure traffic starts flowing.
What I need to do:
* Modify that function to _clear_ the CLRDMASK if it's not required,
or retried frames may have CLRDMASK set when they don't need to.
(Which isn't a huge deal, but..)
Whilst I'm here:
* ath_tx_normal_xmit() should really act like the AMPDU session TX
functions - any incomplete frames will end up being assigned
ath_tx_normal_comp() which will decrement tid->hwq_depth - but that
won't have been incremented.
So whilst I'm here, add a comment to do that.
* Fix the debug print function to be slightly clearer about things;
it's not a good sign when I can't interpret my own debugging output.
I've done some testing on AR9280/AR5416/AR9160 STA and AP modes.
stack.
There are unfortunately quite a few odd cases in BAR TX and BAR TX
retransmission that I haven't yet fully diagnosed. So for now, add
this work-around so the resume() function isn't called too often,
decrementing pause to -1 (and causing things to stay paused.)
and owner_group strings that consist entirely of
digits, interpreting them as the uid/gid number.
This change was needed since new (>= 3.3) Linux
servers reply with these strings by default.
This change is mandated by the rfc3530bis draft.
Reported on freebsd-stable@ under the Subject
heading "Problem with Linux >= 3.3 as NFSv4 server"
by Norbert Aschendorff on Aug. 20, 2012.
Tested by: norbert.aschendorff at yahoo.de
Reviewed by: jhb
MFC after: 2 weeks
a 4kb buffer if a request uses a buffer size of 0. (The Linux ioctl path
already did this.)
PR: kern/155658
Submitted by: Andreas Longwitz
MFC after: 1 week
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.
This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g
When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.
Discussed with: jhb
MFC after: 1 week
is done.
The aggregate path was definitely accessing 'ts' before it was actually
being assigned.
This had the side effect of over-filtering frames, since occasionally that
bit would be '1'.
Whilst here, do the same thing in the non-aggregate completion function -
as calling the filter function may also invalidate bf.
Pointy hat to: adrian, for not noticing this over many, many code reviews.
This fixes issue in nvmecontrol(8), where clang throws a cast-align
warning when casting a __packed structure pointer to a uint32_t
pointer as part of printing raw hex output.
Reported by: dhw
'path' argument of ofw_parsedev() if devspec refers raw device with no path.
For example, `ls /pci@1f,0/ide@d/disk@0,0:a/` works fine, while
`ls /pci@1f,0/ide@d/disk@0,0:a` panicked before this change.
altq_add() and its descendants. Currently altq(4) in FreeBSD is configured
via pf(4) ioctls, which can't configure altq(4) w/o holding locks.
Fortunately, altq(4) code in spife of using M_WAITOK is ready to receive
NULL from malloc(9), so change is mostly mechanical. While here, utilize
M_ZERO instead of bzero().
A large redesign needed to achieve M_WAITOK usage when configuring altq(4).
Or an alternative (not pf(4)) configuration interface should be implemented.
Reported by: pluknet
This is important to secure a small timeframe at boot time, when
network is already configured, but pf(4) is not yet.
PR: kern/171622
Submitted by: Olivier Cochard-LabbИ <olivier cochard.me>
1) Ruleset parser uses a global variable for anchor stack.
2) When processing a wildcard anchor, matching anchors are marked.
To fix the first one:
o Allocate anchor processing stack on stack. To make this allocation
as small as possible, following measures taken:
- Maximum stack size reduced from 64 to 32.
- The struct pf_anchor_stackframe trimmed by one pointer - parent.
We can always obtain the parent via the rule pointer.
- When pf_test_rule() calls pf_get_translation(), the former lends
its stack to the latter, to avoid recursive allocation 32 entries.
The second one appeared more tricky. The code, that marks anchors was
added in OpenBSD rev. 1.516 of pf.c. According to commit log, the idea
is to enable the "quick" keyword on an anchor rule. The feature isn't
documented anywhere. The most obscure part of the 1.516 was that code
examines the "match" mark on a just processed child, which couldn't be
put here by current frame. Since this wasn't documented even in the
commit message and functionality of this is not clear to me, I decided
to drop this examination for now. The rest of 1.516 is redone in a
thread safe manner - the mark isn't put on the anchor itself, but on
current stack frame. To avoid growing stack frame, we utilize LSB
from the rule pointer, relying on kernel malloc(9) returning pointer
aligned addresses.
Discussed with: dhartmei
The hardware can optionally "filter" frames if successive transmissions
to a given node (ie, "entry in the keycache") fail. That way the hardware
can implement a kind of early abort of all the other frames queued to
that destination, rather than simply trying to TX each frame to that
destination (and failing.)
The background:
* If a frame comes back as being filtered, the hardware didn't try to
TX it (or it was outside the TX burst opportunity.) So, take it as a hint
that some (but not all, see below) frames to the destination may be
filtered.
* If the CLRDMASK bit is set in a TX descriptor, the "filter to this
destination" bit in the keycache entry is cleared and TX to that host
will be unconditionally retried.
* Right now everything has the CLRDMASK bit set, so filtered frames
tend to be aggregates and frames that fall outside of the WME burst
window. It was a bit worse in the past as I had messed up the TX
flags and CLRDMASK wasn't being set on aggregate frames.
The annoying bits:
* It's easy (ish) to do for aggregate session frames - firstly, they
can be retried in any order as long as they're within the BAW, and
there's already a bunch of infrastructure tracking how many frames
the TID has queued to the hardware (tid->hwq_depth.) However, for
frames that bypassed the software queue, hwq_depth doesn't get
incremented. I'll fix that in a subsequent commit.
* For non-aggregate session frames, the only retries that can occur
are ones for sequence numbers that hvaen't successfully been TXed yet.
Since there's no re-ordering going on in non-aggregate sessions, if any
subsequent seqno frames make it out, any filtered frames before that
seqno need to be dropped.
Hence why this initially is just for aggregate session frames.
* Since there may be intermediary frames to the destination that
have CLRDMASK set - for example, any directly dispatched management
frames to that destination - it's possible that there will be some
filtered frames followed up by some non filtered frames. Thus,
it can't be assumed that once you see a filtered frame for the given
destination node, all subsequent frames for all TIDs will be filtered.
Ok, with that in mind:
* Create a per-TID filtered frame queue for frames that the hardware
returns as filtered.
* Track filtered frames per-tid, rather than per-node. It just makes
the locking much easier.
* When a filtered frame appears in the completion function, the node
transitions to "filtered", and all subsequent completed error frames
(filtered or otherwise) are put on the filtered frame queue. The TID
is paused once (during the transition from non-filtered to filtered).
* If a filtered frame retry count exceeds SWMAX_RETRIES, a BAR should be
sent.
* Once all the frames queued to the hardware for the given filtered frame
TID, transition back from filtered frame to non-filtered frame, which
means pre-pending all the filtered frames onto the head of the software
queue, clearing the filtered frame state and unpausing the TID.
Things get quite hairy around handling completion (aggr, non-aggr, norm,
direct-dispatched frames to a hardware queue); whether it's an "error",
"cleanup" or "BAR" state as well as filtered, which order to do things
in (eg do filtered BEFORE checking for BAR, as the filter completion
may be needed to actually transmit a BAR frame.)
This work has definitely reminded me that I have to tidy up all the locking
and remove some of the ridiculous lock/unlock/lock/unlock going on in the
completion functions.
It's also reminded me that I should really split out TID versus hardware TXQ
locking, even if the underlying locking is still the destination hardware TXQ.
Finally, this is all pre-requisite for working on AP mode power save support
(PS-POLL, uAPSD) as well as improving performance to misbehaving nodes (as
they can transition into filter mode, stopping any TX until everything has
caught up.)
Finally (ish) - this should also be done for non-aggregate sessions as
there are still plenty of laptops and mobile devices that don't speak
802.11n but do wish for stable, useful power save AP support where packets
aren't simply dropped. This requires software retransmission for
non-aggregate sessions to be implemented, which includes the caveats I've
mentioned above.
Finally finally - this doesn't yet do anything about the CLRDMASK bit in the
TX descriptor. That's still unconditionally set to 1. I'll debug the
current work (mostly ensuring I haven't busted up the hairy transitions
between BAR, filtered, error (all frames in an aggregate failing) and
cleanup (when transitioning from aggregation -> non-aggregation.))
Finally finally finally - this is all original work by yours truely, rather
than ported from the Atheros internal driver codebase or Linux ath9k.
Tested:
* AR9280, AR5416 in STA mode
* AR9280, AR9130 in hostap mode
* Lots and lots of iperf testing in very marginal and non-marginal conditions,
complete with inducing filtered frames + BAR TX conditions.
Use of __builtin_constant_p in a function that is only called via
a pointer is a good example of how out-of-date it was.
Suggested by: bde
MFC after: 1 week
Since all attribute values start at 8-byte aligned boundary, we would
previously incorrectly calculate dn_bonuslen if any attribute but the
last had a variable-length value with length not multiple of 8.
Reported by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Tested by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
MFC after: 2 weeks
directly in _rmlock.h and then including it (and its dependencies)
in pcpu.h. This leads to few _*.h headers to be included in pcpu.h
but this is not considered a big deal.
Really pc_rm_queue should be implemented as a dynamic member with
DPCPU interface, but we really want to keep the read acquisition as
fast as possible, so even the further pc_dynamic indirection should be
avoided, and the pollution is dealt like this.
Discussed with: jhb
MFC after: 1 week
support to FreeBSD. A full description of the overall functionality
being added is below. nvmexpress.org defines NVM Express as "an optimized
register interface, command set and feature set fo PCI Express (PCIe)-based
Solid-State Drives (SSDs)."
This commit adds nvme(4) and nvd(4) driver source code and Makefiles
to the tree.
Full NVMe functionality description:
Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe)
device support.
There will continue to be ongoing work on NVM Express support, but there
is more than enough to allow for evaluation of pre-production NVM Express
devices as well as soliciting feedback. Questions and feedback are welcome.
nvme(4) implements NVMe hardware abstraction and is a provider of NVMe
namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN.
nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks.
nvmecontrol(8) is used for NVMe configuration and management.
The following are currently supported:
nvme(4)
- full mandatory NVM command set support
- per-CPU IO queues (enabled by default but configurable)
- per-queue sysctls for statistics and full command/completion queue
dumps for debugging
- registration API for NVMe namespace consumers
- I/O error handling (except for timeoutsee below)
- compilation switches for support back to stable-7
nvd(4)
- BIO_DELETE and BIO_FLUSH (if supported by controller)
- proper BIO_ORDERED handling
nvmecontrol(8)
- devlist: list NVMe controllers and their namespaces
- identify: display controller or namespace identify data in
human-readable or hex format
- perftest: quick and dirty performance test to measure raw
performance of NVMe device without userspace/physio/GEOM
overhead
The following are still work in progress and will be completed over the
next 3-6 months in rough priority order:
- complete man pages
- firmware download and activation
- asynchronous error requests
- command timeout error handling
- controller resets
- nvmecontrol(8) log page retrieval
This has been primarily tested on amd64, with light testing on i386. I
would be happy to provide assistance to anyone interested in porting
this to other architectures, but am not currently planning to do this
work myself. Big-endian and dmamap sync for command/completion queues
are the main areas that would need to be addressed.
The nvme(4) driver currently has references to Chatham, which is an
Intel-developed prototype board which is not fully spec compliant.
These references will all be removed over time.
Sponsored by: Intel
Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
- Use callout(9) rather than timeout(9).
- Add a mutex as an I/O lock that protects the adapter and is used
for the I/O path.
- Add an sx lock as a configuration lock that protects the relationship
of configured volumes.
- Freeze the request queue when a DMA load is deferred with EINPROGRESS
and unfreeze the queue when the DMA callback is invoked.
- Explicitly poll the hardware while waiting to submit a command to
allow completed commands to free up slots in the command ring.
- Remove driver-wide 'initted' variable from mlx_*_fw_handshake() routines.
That state should be per-controller instead. Add it as an argument
since the first caller knows when it is the first caller.
- Remove explicit bus_space tag/handle and use bus_*() rather than
bus_space_*().
- Move duplicated PCI device ID probing into a mlx_pci_match() routine.
- Don't check for PCIM_CMD_MEMEN (the PCI bus will enable that when
allocating the resource) and use pci_enable_busmaster() rather than
manipulating the register directly.
Tested by: no one despite multiple requests (hope it works)
an NVidia Tegra 2 CPU.
Tegra 2 needs an external patch to pmap for atomic operations to work. Even
with this the Kernel only gets to the mount root prompt. As such Tegra
support is considered experimental, however adding the kernel config will
help ensure the Tegra code builds.
These are intended for software TX filtering support, where the NIC
decides there has been too many successive failues to a destination
and will filter it.
Although the filtering is done per-destination (via the keycache),
the state and queue is kept per-TID for now. It simplifies the overall
architecture design and locking.
Whilst here, add ATH_TID_UNLOCK_ASSERT().
* Don't treat high percentage failures as "sucessive failures" - high
MCS rates are very picky and will quite happily "fade" from low
to high failure % and back again within a few seconds. If they really
don't work, the aggregate will just plain fail.
* Only sample MCS rates +/- 3 from the current MCS. Sample will back off
quite quickly, so there's no need to sample _all_ MCS rates between
a high MCS rate and MCS0; there may be a lot of them.
* Modify the smoothing rate to be 75% rather than 95% - it's more adaptive
but it comes with a cost of being slightly less stable at times.
A per-node, hysterisis behaviour would be nicer.
such that when commenting/uncommentting lines, horizontal spacing is
maintained...
Also fix some minor comment formatting to line things up, etc...
Reviewed by: gnn, imp
MFC after: 1 week
(download microcode with offsets, save, and activate).
SATI translation layer was incorrectly using allocation length instead
of blocks, and was constructing the ATA command incorrectly.
Also change #define to specify that the 512 block size here is
specific for DOWNLOAD_MICROCODE, and does not relate to the device's
logical block size.
Submitted by: scottl (with small modifications)
MFC after: 3 days
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
MSI are implemented via Inbound Shared Doorbell 1 interrupts. Interrupts
are triggered by writing to Software Triggered Interrupt registeri (PCIe
card using physical address of this register in BAR0 space). There are 32
interrupts available. It can be increased by using Doorbell 2 and
Doorbell 3 registers to 96 interrupts.
Obtained from: Marvell, Semihalf
MSI are implemented via software interrupt. PCIe cards will write
into software interrupt register which will cause inbound shared
interrupt which will be interpreted as a MSI.
Obtained from: Marvell, Semihalf
- Add functions to calculate clocks instead using hardcoded values
- Update reset and timers functions
- Update number of interrupts
- Change name of platform from db88f78100 to db78460
- Correct DRAM size and PCI IRQ routing in dts file.
Obtained from: Semihalf
trap checks (eg. printtrap()).
Generally this check is not needed anymore, as there is not a legitimate
case where curthread != NULL, after pcpu 0 area has been properly
initialized.
Reviewed by: bde, jhb
MFC after: 1 week
- Add constants for the rest of the fields in the PCI-express device
capability and control registers.
- Tweak some of the recently added PCI-e capability constants (always
use hex for offsets in config space, and include a shortened
version of the relevant register in the name of field constants).
MFC after: 1 week
