A buf's b_pages and b_npages fields may be inconsistent after a panic.
For instance, vfs_vmio_invalidate() sets b_npages to zero only after all
pages are unwired and their page array entries are cleared.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This makes factual interrupt routing match one shipped with UEFI firmware.
With old firmware this make legacy interrupts work reliable for functions 0
of PCI slots 3-6. Updated UEFI image fixes problem completely.
the ITS driver file. There is no need for other drivers to need to know
about these structures.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
kk_KZ.UTF-8 was originally removed in r290494, but restored as an alias to
en_US.UTF-8 in r302329
MFC after: 1 week
X-MFC with: r302329
PR: 211046
Reported by: dhw, O. Hartman <ohartman@zedat.fu-berlin.de>
Sponsored by: EMC / Isilon Storage Division
just with INVARIANTS
rwatson's point was valid in the sense that if the data passed at runtime is
invalid, it should always trip the invariant, not just in the debug case.
This is a deterrent against malicious input, or input caused by hardware
errors.
MFC after: 4 days
X-MFC with: r302577
Requested by: rwatson
Sponsored by: EMC / Isilon Storage Division
illumos/illumos-gate@1825bc56e51825bc56e5https://www.illumos.org/issues/6878
Summary of changes:
* Replace generic "scan done" message with "scan aborted, restarting",
"scan cancelled", or "scan done"
* Log number of errors using spa_get_errlog_size
* Refactor scan restarting check into static function
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Nav Ravindranath <nav@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@99189164df99189164dfhttps://www.illumos.org/issues/6940
Similar to #6334, but this time with empty directories:
$ zfs create tank/quota
$ zfs set quota=10M tank/quota
$ zfs snapshot tank/quota@snap1
$ zfs set mountpoint=/mnt/tank/quota tank/quota
$ mkdir /mnt/tank/quota/dir # create an empty directory
$ mkfile 11M /mnt/tank/quota/11M
/mnt/tank/quota/11M: initialized 9830400 of 11534336 bytes: Disc quota exceeded
$ rmdir /mnt/tank/quota/dir # now unlink the empty directory
rmdir: directory "/mnt/tank/quota/dir": Disc quota exceeded
From user perspective, I would expect that ZFS is always able to remove files
and directories even when the quota is exceeded.
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Simon Klinkert <simon.klinkert@gmail.com>
MFC after: 2 weeks
illumos/illumos-gate@8df0bcf0df8df0bcf0dfhttps://www.illumos.org/issues/6513
If a ZFS object contains a hole at level one, and then a data block is created
at level 0 underneath that l1 block, l0 holes will be created. However, these
l0 holes do not have the birth time property set; as a result, incremental
sends will not send those holes.
Fix is to modify the dbuf_read code to fill in birth time data.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@11ceac77ea11ceac77eahttps://www.illumos.org/issues/6844
dnode_next_offset is used in a variety of places to iterate over the holes or
allocated blocks in a dnode. It operates under the premise that it can iterate
over the blockpointers of a dnode in open context while holding only the
dn_struct_rwlock as reader. Unfortunately, this premise does not hold.
When we create the zio for a dbuf, we pass in the actual block pointer in the
indirect block above that dbuf. When we later zero the bp in
zio_write_compress, we are directly modifying the bp. The state of the bp is
now inconsistent from the perspective of dnode_next_offset: the bp will appear
to be a hole until zio_dva_allocate finally finishes filling it in. In the
meantime, dnode_next_offset can detect a hole in the dnode when none exists.
I was able to experimentally demonstrate this behavior with the following
setup:
1. Create a file with 1 million dbufs.
2. Create a thread that randomly dirties L2 blocks by writing to the first L0
block under them.
3. Observe dnode_next_offset, waiting for it to skip over a hole in the middle
of a file.
4. Do dnode_next_offset in a loop until we skip over such a non-existent hole.
The fix is to ensure that it is valid to iterate over the indirect blocks in a
dnode while holding the dn_struct_rwlock by passing the zio a copy of the BP
and updating the actual BP in dbuf_write_ready while holding the lock.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alex Reece <alex@delphix.com>
MFC after: 3 weeks
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
locale (which cause core dump) by removing whole 'table' argument
by which it passed.
2) Restore __collate_range_cmp() in __sccl().
3) Collating [a-z] range in regcomp() only for single bytes locales
(we can't do it now for other ones). In previous state only first 256
wchars are considered and all others are just silently dropped from the
range.
Instead of changing whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and concentrace on fixing bugs in what we have now,
too many small obstacles instead, counting ports.
It is not safe to iterate the sub-channel list w/o lock on the
close path, while it's even more difficult to hold the lock
and iterate the sub-channel list. We leverage the
vmbua_{get,rel}_subchan() functions to solve this dilemma.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7112
Device detach method may sleep.
While I'm here, rename the function, fix indentation and function
comment.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7110
- Make the vmbus_chan_add more straightforward.
- Partially fix the hv_vmbus_release_unattached_channels().
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7109
In case that VMBUS_CHAN_ISPRIMARY is needed in the early place of
channel setup.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7108
This paves the way for more cleanup/disentangle.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7102
