Given that 64c/128t CPUs are currently available, and that many
devices (nvme, many NICs) desire to map 1 MSI-X vector per core,
or even 1 per-thread, it is becoming far easier to see MSI-X interrupt
setup fail due to msi vector exhaustion, and devices fail to attach at
boot on large system.
This bump costs 12KB on amd64 (and 6KB on i386), which seems
worth the trade off for a better out of the box experience on
high end hardware.
Reviewed by: jhb
MFC after: 21 days
Sponsored by: Netflix
RB_LEFT or RB_RIGHT, so they aren't stripping off the color bit
encoded there. Strip off that bit for linuxkpi.
Reported by: dch
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25245
the debug messages. While here, clean up some variable naming.
Reviewed by: bcr (manpages), emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25230
When doing A-MSDU offload handling the driver is required to mark
A-MSDUs from the same MPDU with the same sequence number.
It then tags them as AMSDU (if it's a decap'ed A-MSDU) and AMSDU_MORE
(saying there's more AMSDUs decapped in the same MSDU.)
This allows encryption and sequence number offload to work right.
In the A-MSDU path the sequence number check looks at the A-MSDU flags
in the frame to see whether it's part of the same seqno and will pass them
(ie, not increment rx_seq until the last A-MSDU is seen from the driver,
or a new seqno shows up.0
However, I did this work in the A-MSDU path but not the A-MSDU in A-MPDU path.
For the non A-MDSU offload case the A-MPDU receive reordering will do its
thing and then pass up the MPDU up for decap - which then will see it's
an A-MSDU and decap each sub-frame. But this isn't done for offloaded
A-MSDU frames.
This requires two parts:
* Don't bump the RX sequence number, same as above; and
* If frames go into the reordering buffer, they need to be added into the slot
as a set of frames rather than a single frame, so once a new seqno shows up
this slot can be marked as "full" and we can move on.
This patch does the first. The latter requires that I find and commit
work to change rxa_m from an mbuf to an mbufq and the nhandle A-MSDU
there. But, the first is enough to allow the normal case (ie, no or not
a lot of A-MPDU RX reordering) to work.
This allows the athp driver (QCA9880) throughput to go from VERY low
(like 5mbit TCP, 1/3-1/4 expected UDP throughput) to ~ 250mbit TCP
and > 300mbit UDP on a VHT/40 channel. TCP sucks because, well, it
shows up as MASSIVE packet loss when all but one frame in a decap'ed
A-MSDU stream is dropped. Le whoops.
Now, where'd I put that laptop with the patch for rxa_m mbufq that
I wrote like in 2017...
Tested:
* AR9380, STA/AP mode (a big no-op, no A-MSDU hardware decap);
* if_run (RT3593), STA DWDS mode (A-MPDU / A-MSDU receive, but again
no A-MSDU hardware decap);
* QCA9880, STA/AP mode (which is doing hardware A-MPDU/A-MSDU decap,
but no A-MPDU reordering in the firmware.)
r286700 added the "lacp_fast_timeout" option to `ifconfig', but we forgot to
include the new option in the string used to decode the option bits. Add
"LACP_FAST_TIMO" to LAGG_OPT_BITS.
Also, s/LAGG_OPT_LACP_TIMEOUT/LAGG_OPT_LACP_FAST_TIMO/g , to be clearer that
the flag indicates "Fast Timeout" mode.
Reported by: Greg Foster <gfoster at panasas dot com>
Reviewed by: jpaetzel
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D25239
This function returns NULL if the ring identified by
queue id and direction is in netmap mode. Otherwise
return the corresponding kring.
Use this function to replace vtnet_netmap_queue_on().
MFC after: 1 week
In particular, invalidation of the preloaded modules text to allow
execution from it was broken after D25188/r362031.
Reviewed by: markj
Reported by: delphij, dhw
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
This partially reverts r361053 since there have been reports
by users that this breaks some functionality for em(4)
devices; it seems at first glance that some sort of interface
restart is required for those cards.
This isn't a proper fix; this unbreaks those users until a proper
fix is found for their issues.
PR: 240818
Reported by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
MFC after: 3 days
With this change all ZVOL updates are initiated from the SPA sync
context instead of a mix of the sync and open contexts. The updates are
queued to be applied by a dedicated thread in the original order. This
should ensure that ZVOLs always accurately reflect the corresponding
datasets. ZFS ioctl operations wait on the mentioned thread to complete
its work. Thus, the illusion of the synchronous ZVOL update is
preserved. At the same time, the SPA sync thread never blocks on ZVOL
related operations avoiding problems like reported in bug 203864.
This change is based on earlier work in the same direction: D7179 and
D14669 by Anthoine Bourgeois. D7179 tried to perform ZVOL operations
in the open context and that opened races between them. D14669 uses a
design very similar to this change but with different implementation
details.
This change also heavily borrows from similar code in ZoL, but there are
many differences too. See:
- a0bd735adb
- https://github.com/zfsonlinux/zfs/issues/3681
- https://github.com/zfsonlinux/zfs/issues/2217
PR: 203864
MFC after: 5 weeks
Sponsored by: CyberSecure
Differential Revision: https://reviews.freebsd.org/D23478
Allow the TCP header to reside in the mbuf following the IP header.
Else such packets will get dropped.
Backtrace:
mlx5e_sq_xmit()
mlx5e_xmit()
ether_output_frame()
ether_output()
ip_output_send()
ip_output()
rip_output()
sosend_generic()
sosend()
kern_sendit()
sendit()
sys_sendto()
amd64_syscall()
fast_syscall_common()
MFC after: 1 week
Sponsored by: Mellanox Technologies
Typically the TCP/IP headers fit within the first mbuf and should not
trigger any of the error cases. Use unlikely() for these cases.
No functional change.
MFC after: 1 week
Sponsored by: Mellanox Technologies
When parsing the TCP/IP header in the fast path, make it clear by using
the const keyword, no fields are to be modified inside the transmitted
packet.
No functional change.
MFC after: 1 week
Sponsored by: Mellanox Technologies
I2C_SET was quite inflexible, it used too long delays as well as some
unnecessary delays. The new building blocks are iicbb_clockin and
iicbb_clockout. The former sets SDA and starts the high period of SCL,
the latter executes the low period of SCL. What happens during the high
phase depends on the operation. For writes we just hold both lines, for
reads we poll SDA. S, Sr and P change SDA in the middle of the high
period.
Also, the calculation of udelay has been updated, so that the resulting
period more closely corresponds the requested bus frequency. There is a
new knob, io_delay, that allows to further adjust udelay based on the
estimated latency of pin toggling operations.
Finally, I slightly changed debug tracing and added error indicators to
it. The debug prints are compiled in but disabled by default. This can
be of use if there is any fallout from this change.
Some ideas for further improvements:
- add a function for sub-microsecond delays (e.g., in units of 1/10th of
a microsecond) and use it for more precise timing of short delays;
- account for the actual time spent in the pin I/O.
Some sample debug output with the new code follows.
Reading temperature and humidity from HTU21 in the bus hold mode:
<<w80+ we3+ <w81+ .....r6d+ rac+ r94- >>
<<w80+ we5+ <w81+ .............r47+ re2+ r84- >>
where '<<' is S, '<' is Sr, '>>' is P, '.' is one millisecond of clock
stretching by the slave.
Reading temperature and humidity in the no-hold mode:
<<w80+ wf3+ >>
<<w81- >>
<<w81+ r6d+ r54+ raf- >>
<<w80+ wf5+ >>
<<w81- >>
<<w81+ r48+ r4e+ r9c- >>
where '+' is Ack and '-' is NoAck.
We see that first read attempts are not acknowledged.
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D22206
Like every other firmware image in the tree, the makefile will need to
be updated to point to the newest import.
Reviewed by: erj, imp (previous version)
Differential Revision: https://reviews.freebsd.org/D25222
- Use the same definition of free memory as Linux.
- Rename the totalbig and freebig fields to match the corresponding
names on Linux.
Discussed with: alc
MFC after: 1 week
The firmware module arbitrarily limits us to at most 50 images. It is
possible to hit this limit on platforms that preload many firmware
images, or link all of the firmware images for a set of devices into the
kernel.
Convert the table into a linked list, removing the limit.
Reported by: Steve Wheeler
Reviewed by: rpokala
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25161
After r361988 fixed the reference count leak on booke64, it became possible
for an iteration somewhere in the middle of a page to become stale, with the
page vanishing (correctly) due to all PTEs on that page going away.
pte_find_next() would start at that iterator, and move along 'higher' order
directory pages until it finds a valid one, without zeroing out the lower
order pages. For instance:
/* Find next pte at or above 0x10002000. */
pte = pte_find_next(pmap, &(0x10002000));
pte_remove(pmap, pte);
/* This pte was the last reference in the page table page, page is
* gone.
*/
pte = pte_find_next(pmap, 0x10002000);
/* pte_find_next will see 0x10002000's page is gone, and jump to the
* next one, but starting iteration at the '0x2000' slot, skipping
* 0x0000 and 0x1000.
*/
This caused some processes, like git, to trip the KASSERT() in
pmap_release().
Fix this by zeroing all lower order iterators at each level.
It seems that second call does not add any useful state change for all
implemented timecounters.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Right now code first flushes all local TLB entries that needs to be
flushed, then signals IPI to remote cores, and then waits for
acknowledgements while spinning idle. In the VMWare article 'Don’t
shoot down TLB shootdowns!' it was noted that the time spent spinning
is lost, and can be more usefully used doing local TLB invalidation.
We could use the same invalidation handler for local TLB as for
remote, but typically for pmap == curpmap we can use INVLPG for locals
instead of INVPCID on remotes, since we cannot control context
switches on them. Due to that, keep the local code and provide the
callbacks to be called from smp_targeted_tlb_shootdown() after IPIs
are fired but before spin wait starts.
Reviewed by: alc, cem, markj, Anton Rang <rang at acm.org>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D25188
- Configure ipu1_di0 tob e sourced from the VIDEO_PLL(PLL5) and hardcode
frequency to (455000000/3)Mhz. This value, further divided, can yield
frequencies close enough to support 1080p, 720p, 1024x768, and 640x480
modes. This is not ideal but it's an improvement comparing to the only
hardcoded 1024x768 mode.
- Fix memory leaks if attach method failed
- Print EDID when -v passed to the kernel
Writing segment id to I2C device 0x30 only required if the segment is
non-zero. On the devices without E-DCC support writing to that address
fails and whole transaction then fails too. To avoid this do
not attempt write to the segment selection device unless required.
MFC after: 2 weeks
- crypto_apply() is only used for reading a buffer to compute a
digest, so change the data pointer to a const pointer.
- To better match m_apply(), change the data pointer type to void *
and the length from uint16_t to u_int. The length field in
particular matters as none of the apply logic was splitting requests
larger than UINT16_MAX.
- Adjust the auth_xform Update callback to match the function
prototype passed to crypto_apply() and crypto_apply_buf(). This
removes the needs for casts when using the Update callback.
- Change the Reinit and Setkey callbacks to also use a u_int length
instead of uint16_t.
- Update auth transforms for the changes. While here, use C99
initializers for auth_hash structures and avoid casts on callbacks.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25171
The original PCIe hot-plug code required a couple of things which cause
PCI probing errors on the QEMU Q35 system and possibly physical systems
(Dell R6515).
Allocate the hot-plug interrupt as shared to support INTx interrupts.
The hot-plug interrupt mechanism should normally be MSI as PCIe mandates
MSI support, but QEMU's Q35 bridge only provides INTx interrupts.
Second, the code required the Electromechanical Interlock (Slot Status
EIS) to be engaged if present (Slot Capability EIP). Some platforms
including QEMU Q35 set EIP but not EIS. Fix by deleting the check.
Reviewed by: imp, mav, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24877
Somewhere in net80211 if_xname is checked against NULL but it doesn't trigger
a compiler warning, but this does. So DTRT for FreeBSD and the other if_xname
derefences can be converted to this function at a later time.
applications, which often depend on this being the case. There's a new
sysctl, compat.linux.default_openfiles, to control this behaviour.
Reviewed by: kevans, emaste, bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25177
standard SO_SNDBUF/SO_RCVBUF. Mostly cosmetics, to get rid
of the warning during 'apt upgrade'.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25173
This simplifies the code and allows to further split rtentry and nexthop,
removing one of the blockers for multipath code introduction, described in
D24141.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25192
Cubic calculates the new cwnd based on absolute time
elapsed since the start of an epoch. A cubic epoch is
started on congestion events, or once the congestion
avoidance phase is started, after slow-start has
completed.
When a sender is application limited for an extended
amount of time and subsequently a larger volume of data
becomes ready for sending, Cubic recalculates cwnd
with a lingering cubic epoch. This recalculation
of the cwnd can induce a massive increase in cwnd,
causing a burst of data to be sent at line rate by
the sender.
This adds a flag to reset the cubic epoch once a
session transitions from app-limited to cwnd-limited
to prevent the above effect.
Reviewed by: chengc_netapp.com, tuexen (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25065
vmem quantum cache is only needed when doing a lot of concurrent allocations,
which doesn't happen when allocating MSIs. This wastes memory for the cache
zones. Avoid this waste and don't use the quantum cache.
Reported by: markj
These two functions are needed by nfs-over-tls, but could also be
useful for other purposes.
mb_alloc_ext_plus_pages() - Allocates a M_EXTPG mbuf and enough anonymous
pages to store "len" data bytes.
mb_mapped_to_unmapped() - Copies the data from a list of mapped (non-M_EXTPG)
mbufs into a list of M_EXTPG mbufs allocated with anonymous pages.
This is roughly the inverse of mb_unmapped_to_ext().
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D25182
This avoids dirtying creds in the common case, see the comment in kern_prot.c
for details.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D24007
Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.
Major changes:
- Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c
to simplify code sharing between legacy and iflib version of driver
- Add support for most recent FW API version (1.10), which extends FW
LLDP Agent control by user to X722 devices
- Improve handling of device global reset
- Add support for the FW recovery mode
- Use virtchnl function to validate virtual channel messages instead of
using separate checks
- Fix MAC/VLAN filters accounting
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24564
Use this in GELI to print out a different message when accelerated
software such as AESNI is used vs plain software crypto.
While here, simplify the logic in GELI a bit for determing which type
of crypto driver was chosen the first time by examining the
capabilities of the matched driver after a single call to
crypto_newsession rather than making separate calls with different
flags.
Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25126
Properly handle reference counts in the 64-bit pmap page directories.
Otherwise all page table pages would leak due to over-referencing. This
would cause a quick enter to swap on a desktop system (AmigaOne X5000) when
quitting and rerunning applications, or just building world.
Add an INVARIANTS check to validate no leakage at pmap release time.
Introducing flags to track the initial Wmax dragging and exit
from slow-start in TCP Cubic. This prevents sudden jumps in the
caluclated cwnd by cubic, especially when the flow is application
limited during slow start (cwnd can not grow as fast as expected).
The downside is that cubic may remain slightly longer in the
concave region before starting the convex region beyond Wmax again.
Reviewed by: chengc_netapp.com, tuexen (mentor)
Approved by: tuexen (mentor), rgrimes (mentor, blanket)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D23655
In the recent dts sync the name of the aips-bus@ changed to bus@. Reflect
this change and add an additional OF_finddevice in fix_fdt_interrupt_data()
and in fix_fdt_iomuxc_data() with bus@ only. Iow, keep the old naming for
compatibility.
Discussed with: ian@
significant bit in the pointer to the node from its parent to indicate
that the node is red. Have the tree rotation macros leave the
old-parent/new-child node red and the new-parent/old-child node black.
This change makes RB_LEFT and RB_RIGHT no longer assignable, and
RB_COLOR no longer defined. Any code that modifies the tree or
examines a node color would have to be modified after this change.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25105
In the receive interrupt routine, always call netmap_rx_irq().
The latter function will return != NM_IRQ_PASS if netmap is not
active on that specific receive queue, so that the driver can go
on with iflib_rxeof(). Note that netmap supports partial opening,
where only a subset of the RX or TX rings can be open in netmap mode.
Checking the IFCAP_NETMAP flag is not enough to make sure that the
queue is indeed in netmap mode.
Moreover, in case netmap_rx_irq() returns NM_IRQ_RESCHED, it means
that netmap expects the driver to call netmap_rx_irq() again as soon
as possible. Currently, this may happen when the device is attached
to a VALE switch.
Reviewed by: gallatin
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25167
Add a freebsd32_ptrace() and move as many freebsd32 shims as possible
to freebsd32_ptrace(). Aside from register sets, freebsd32 passes
pointers to native structures to kern_ptrace() and converts to/from
native/32-bit structure formats in freebsd32_ptrace() outside of
kern_ptrace().
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25195
The lock-protected iteration is trivially avoidable.
This removes a serialisation point from Linux binaries (which end up calling
here from the sysinfo syscall).
DEBUG is a kernel configuration flag and if used cpufreq_dt.c will fail the
build of kernel.
PR: 246867
Submitted by: Oskar Holmund (oskar.holmlund@ohdata.se)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25080
The previous code was computing an incorrect value in a very expensive
manner. "sharedram" is supposed to be the amount of memory used by
named swap objects, which on FreeBSD basically corresponds to memory
usage by shared memory objects (including, for example, GEM objects) and
tmpfs. We currently have no cheap way to count such pages. The
previous code tried to determine the number of copy-on-write pages
shared between processes.
Just replace the computed value with 0. illumos reportedly does the
same thing. Linux itself did not populate this field until a 2014
commit, "mm: export NR_SHMEM via sysinfo(2) / si_meminfo() interfaces".
Reported by: mjg
MFC after: 1 week
The non-legacy interface always defines num_buffers in the header,
regardless of whether VIRTIO_NET_F_MRG_RXBUF, just leaving it unused. We
also need to ensure our virtqueue doesn't filter out VIRTIO_F_VERSION_1
during negotiation, as it supports non-legacy transports just fine. This
fixes network packet transmission on TinyEMU.
Reviewed by: br, brooks (mentor), jhb (mentor)
Approved by: br, brooks (mentor), jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D25132
The feature bits are exposed as a 32-bit register with 2 banks, so we
should negotiate both halves. Notably, VIRTIO_F_VERSION_1 is in the
upper half, and will be used in an upcoming commit.
The PCI bus driver also has this bug, but the legacy BAR layout did not
include selector registers and is rather different from the modern
layout, so it remains solely as legacy.
Reviewed by: br, brooks (mentor), jhb (mentor)
Approved by: br, brooks (mentor), jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D25131
Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method
can just reference the data buffer instead of immediately copying it.
Extend the offload KPI with optional PDU queue method, allowing to specify
completion callback, called when all the data referenced by above has been
transferred and won't be accessed any more (the buffers can be freed).
Implement the above functionality in software iSCSI driver using mbufs
with external storage and reference counter. Note that some NICs (ixl(4))
may keep the mbuf in TX queue for a long time, so CTL has to be ready.
Add optional method to struct ctl_scsiio for buffer reference counting.
Implement it for CTL block backend, allowing to delay free of the struct
ctl_be_block_io and memory it references as needed. In first reincarnation
of the patch I tried to delay whole I/O as it is done for FibreChannel,
that was cleaner, but due to the above callback delays I had to rewrite
it this way to not leave LUN referenced potentially for hours or more.
All together on sequential read from ZFS ARC this saves about 30% of CPU
time and memory bandwidth by avoiding one of 3 memory copies (the other
two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers).
On tests with 2x Xeon Silver 4114 this allows to reach full line rate of
100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD,
but expectations to saturate them are pretty high. ;)
Discussed with: Chelsio
Sponsored by: iXsystems, Inc.
Currently we only call sbi_shutdown in cpu_reset, which means we reach
"Please press any key to reboot." even when RB_POWEROFF is set, and only
once the user presses a key do we then shutdown. Instead, register a
shutdown_final event handler and make an SBI shutdown call if
RB_POWEROFF is set.
Reviewed by: br, jhb (mentor), kp
Approved by: br, jhb (mentor), kp
Differential Revision: https://reviews.freebsd.org/D25183
is to know the time to first byte in and time to first byte out. Currently we
have no way to know these all we have is t_starttime. That (t_starttime) tells us
what time the 3 way handshake completed. We don't know when the first
request came in or how quickly we responded. Nor from a client perspective
do we know how long from when we sent out the first byte before the
server responded.
This small change adds the ability to track the TTFB's. This will show up in
BB logging which then can be pulled for later analysis. Note that currently
the tracking is via the ticks variable of all three variables. This provides
a very rough estimate (hz=1000 its 1ms). A follow-on set of work will be
to change all three of these values into something with a much finer resolution
(either microseconds or nanoseconds), though we may want to make the resolution
configurable so that on lower powered machines we could still use the much
cheaper ticks variable.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D24902
This can happen with very large kernels (e.g. ones embedding a root
filesystem). The DTB written by OpenSBI/BBL is quite small so this is
unlikely to hit important data, but if it does this can result in very
confusing and hard-to-debug crashes. Add a KASSERT() and a verbose print
to catch this problem with debug kernels.
While this will not print any output by default if it fails (that would
depend on EARLY_PRINTF), at least the kernel now halts reliably instead
of randomly crashing.
Reviewed By: mhorne
Differential Revision: https://reviews.freebsd.org/D25153
By default OpenSBI and BBL will pass the DTB at a 2MB-aligned address.
However, by default there are no 2MB aligned regions between the SBI and
the kernel, so we have to choose a 2MB aligned region after the kernel.
OpenSBI defaults to placing the DTB 32MB after the start of the kernel but
this is not sufficient for a kernel with a large MFS embedded.
We could increase this offset to a larger number (e.g. 64/128/256) but that
imposes restrictions on the minimum RAM size.
Another solution would be to place the DTB between OpenSBI and the kernel
at 1MB alignment, but current locore.S code assumes 2MB alignment.
With this change I can now boot on QEMU with an OpenSBI configured to
store the DTB at an offset of 1MB.
See also https://github.com/riscv/opensbi/issues/169
Reviewed By: mhorne
Differential Revision: https://reviews.freebsd.org/D25151
If the POWER firmware detects a bad CPU core, it will "GUARD" it out,
marking it disabled. Any attempt to spin up a bad CPU will trigger a panic
later on when waiting for threads on said core to wake up. Support limping
along on fewer cores instead.
This was intended to test the locking used in the MacOS X kernel on a
FreeBSD system, to make use of WITNESS and other debugging infrastructure.
This hasn't been used for ages, to take it out to reduce the #ifdef
complexity.
MFC after: 1 week
This logic is running the beacon receive bits in STA+AP mode on both the
STA and AP side. The STA side sees its beacons from the BSS fine; the
AP side is seeing other beacons on the same channel but with the BSS
node for some odd reason. (I think it's a valid reason, but I currently
forget what that valid reason is.)
So, just to be cleaner about things, don't run the nexttbtt/etc bits
at all if we're in hostap mode. If I ever get mesh working then maybe
I'll make sure it works right on mesh+ap and mesh+sta modes.
Whilst here, log the VAP i'm being called on to make it clearer what
is going on. I may end up adding a VAP dprintf version of this at
some point.
Tested:
* AR9380, STA (DWDS client) + hostap on the same NIC
This removes the requirement to know what's in the ifp.
(If someone wants a quick clean-up task, it'd be nice to convert instances
of ifp dereferencing for if_xname over to this method.)
This updates the logic to allow:
* A-MPDU if available;
* A-MSDU if available and A-MPDU is off/NACKed;
* A-MPDU+A-MSDU if it's available and negotiated;
* Fast frames if the node is 11abg (and not HT/VHT.)
This allows for things to fail back to A-MSDU or fast frames
if A-MPDU isn't available rather than needing to be non-HT/non-VHT.
It also allows A-MPDU+A-MSDU to work if it's negotiated.
Tested:
* AR9380, STA + AP mode (A-MPDU, A-MSDU, FF, A-MPDU+A-MSDU)
* RT5350, STA mode (A-MSDU, FF)
* AR9170, STA mode (A-MSDU, FF)
synchronous inode update.
The IN_SIZEMOD and IN_IBLKDATA flags indicate changes to the
file size and block pointer fields in the inode. When these
fields have been changed, the fsync() and fsyncdata() system
calls must write the inode to ensure their semantics that the
file is on stable store.
The IN_SIZEMOD and IN_IBLKDATA flags cannot be cleared until
a synchronous write of the inode is done. If they are cleared
on an asynchronous write, then the inode may not yet have been
written to the disk when an fsync() or fsyncdata() call is done.
Absent these flags, these calls would not know that they needed
to write the inode. Thus, these flags only can be cleared on
synchronous writes of the inode. Since the inode will be locked
for the duration of the I/O that writes it to disk, no fsync()
or fsyncdata() will be able to run before the on-disk inode
is complete.
Reviewed by: kib
MFC with: -r361785
Differential revision: https://reviews.freebsd.org/D25072
Some automation tries to detect if nvd or nda is in used, and the presence of
both confuses it. Provide a knob to turn off nvd alias creation
(kern.cam.nda.nvd_compat=0) for these situations. The default is the same:
create the nvd compat link.
Summary:
Radix on AIM, and all of Book-E (currently), can do direct addressing of
user space, instead of needing to map user addresses into kernel space.
Take advantage of this to optimize the copy(9) functions for this
behavior, and avoid effectively NOP translations.
Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D25129
Summary:
The point of this addition is to cache CPU behavior 'features', to avoid
having to recompute based on CPU, etc.
The first such use case is to avoid the unnecessary manipulation of the
SLBs (Segment Lookaside Buffers) when using the Radix pmap on POWER9.
Since we already get the PCPU pointer wherever we swap the SLB entries,
we can use a cached flag to check if it's necessary to perform the
operation anyway, and skip it when not.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D24908
Instead, just skip marking pages valid if the read fails. Future
attempts to access such pages will notice that they are not marked valid
and try to read them from disk again.
Reviewed by: kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25138
Comparing the object files produced by GNU as 2.17.50 and Clang IAS
shows many immaterial changes in strtab etc., and one material change
in .text:
1bac: 4c 8b 4f 18 mov 0x18(%rdi),%r9
1bb0: eb 0e jmp 1bc0 <Skein1024_block_loop>
- 1bb2: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1)
- 1bb9: 00 00 00 00
- 1bbd: 0f 1f 00 nopl (%rax)
+ 1bb2: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
+ 1bb9: 00 00 00
+ 1bbc: 0f 1f 40 00 nopl 0x0(%rax)
0000000000001bc0 <Skein1024_block_loop>:
Skein1024_block_loop():
1bc0: 4c 8b 47 10 mov 0x10(%rdi),%r8
1bc4: 4c 03 85 c0 00 00 00 add 0xc0(%rbp),%r8
That is, GNU as and Clang's integrated assembler use different multi-
byte NOPs for alignment (GNU as emits an 11 byte NOP + a 3 byte NOP,
while Clang IAS emits a 10 byte NOP + a 4 byte NOP).
Dependency cleanup hacks are not required, because we do not create
.depend files from GNU as.
Reviewed by: allanjude, arichardson, cem, tsoome
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8434
r359473 removed the page unbusy logic from sendfile_iodone() because when
vm_pager_get_pages_async() would return an error after failing to start
the async I/O (eg. because VOP_BMAP failed), sendfile_swapin() would also
unbusy the pages, and it was wrong to unbusy twice. However this breaks
the case where vm_pager_get_pages_async() succeeds in starting an async I/O
and the async I/O is what fails. In this case, sendfile_iodone() must
unbusy the pages, and because sendfile_iodone() doesn't know which case
it is in, sendfile_iodone() must always unbusy pages and relookup pages
which have been substituted with bogus_page, which in turn means that
sendfile_swapin() must never do unbusy or relookup for pages which have
been given to vm_pager_get_pages_async(), even if there is an error.
Reviewed by: kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25136
Clang IAS does not support the --defsym argument, and
.ifndef SKEIN_USE_ASM
gets turned into
.ifndef 1792
by the preprocessor, which results in
error: expected identifier after '.ifdef'
.ifndef 1792
^
Use #ifdef instead, which still works with GNU as.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25154
For synthetic aliases (just pseudonyms inferred from metadata like GPT or
UFS labels, GPT UUIDs, etc), use the GEOM provider aliasing system to create
a symlink to the real device instead of creating an independent device.
This makes it more clear which labels and devices correspond, and we can
safely have multiple labels to a single device accessed at once.
The confusingly named geom_label on-disk construct continues to behave
identically to how it did before.
This requires teaching GEOM's provider aliasing about the possibility
that aliases might be added later in time, and GEOM's devfs interaction
layer not to worry about existing aliases during retaste.
Discussed with: imp
Relnotes: sure, if we don't end up reverting it
Differential Revision: https://reviews.freebsd.org/D24968
Turns out this isn't a required call. I didn't pick it up because my
uncommitted changes involve new updateslot methods for cards I'm working
on.
Dunce hat to: adrian
GNU as seems to allow macro arguments without the '\' but clang is more
strict in that regard.
This change makes the source code compatible with LLVM's but does not yet
change the build system or rename it to .S.
The new code assembles identically with GNU as 2.17.50.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25143
and not only the software cache of that register. Else
pci_channel_offline() won't detect that the PCI device is gone when
using the LinuxKPI.
MFC after: 1 week
Sponsored by: Mellanox Technologies
description of items residing in a so-called union. FreeBSD currently
only supports 4 such pop levels.
If the push level is not restored within the processing of the same
HID item, an invalid memory location may be used for subsequent HID
item processing.
Verify that the push level is always valid when processing HID items.
Reported by: Andy Nguyen (Google)
MFC after: 3 days
Sponsored by: Mellanox Technologies
This is hopefully a big no-op unless you're running some extra
patches to flip on A-MSDU options in a driver.
802.11n supports sending A-MSDU in A-MPDU. That lets you do things
like pack small frames into an A-MSDU and stuff /those/ into an A-MPDU.
It allows for much more efficient airtime because you're not
wasting time sending small frames - which is still a problem when
doing A-MPDU as there's still per-frame overhead and minimum A-MPDU
density requirements.
It, however, is optional for 802.11n. A lot of stuff doesn't advertise
it (but does it, just wait!); and I know that ath10k does it and my
ath(4) driver work supports it.
Now, 802.11ac makes A-MSDU in A-MPDU something that can happen more
frequently, because even though you can send very large A-MPDUs
(like 1 megabyte and larger) you still have the small frame problem.
So, 802.11ac NICs like ath10k and iwm will support A-MSDU in A-MPDU
out of the box if it's enabled - and you can negotiate it.
So, let's lay down the ground work to enable A-MSDU in A-MPDU.
This will allow hardware like iwn(4) and ath(4) which supports
software A-MSDU but hardware A-MPDU to be more efficient.
Drivers that support A-MSDU in A-MPDU will set TX/RX htcap flags.
Note this is separate from the software A-MSDU encap path; /that/
dictates whether net80211 is doing A-MSDU encapsulation or not.
These HTC flags control negotiation, NOT encapsulation.
Once this negotiation and driver bits are done, hardware like
rtwn(4), run(4), and others will be able to use A-MSDU even without
A-MPDU working; right now FF and A-MSDU aren't even attempted
if you're an 11n node. It's a small hold-over from the initial
A-MPDU work and I know how to fix it, but to flip it on properly
I need to be able to negotiate or ignore A-MSDU in A-MPDU.
Oh and the fun part - some 11ac APs I've tested will quite happily
decap A-MSDU in A-MPDU even though they don't negotiate it when
doing 802.11n. So hey, I know it works - I just want to properly
handle things. :-)
Tested:
* AR9380, STA/AP mode
The 11b/11g ERP and slot time update handling are two things which weren't
migrated into the per-VAP state when Sam did the initial VAP work.
That makes sense for a lot of setups where net80211 is driving radio state
and the radio only cares about the shared state.
However, as noted by a now deleted comment, the ERP and slot time updates
aren't EXACTLY correct/accurate - they only take into account the most
RECENTLY created VAP, and the state updates when one creates/destroys
VAPs isn't exactly great.
So:
* track the short slot logic per VAP;
* whenever the slot time configuration changes, just push it into a deferred
task queue update so drivers don't have to serialise it themselves;
* if a driver registers a per-VAP slot time handler then it'll just get the
per VAP one;
* .. if a driver registers a global one then the legacy behaviour is maintained -
a single slot time is calculated and pushed out.
Note that the calculated slot time is better than the existing logic - if ANY
of the VAPs require long slot then it's disabled for all VAPs rather than
whatever the last configured VAP did.
Now, this isn't entirely complete - the rest of ERP tracking around short/long
slot capable station tracking needs to be converted into per-VAP, as well
as the preamble/barker flags. Luckily those also can be done in a similar
fashion - keep per-VAP counters/flags and unify them before doing the driver
update. I'll defer that work until later.
All the existing drivers can keep doing what they're doing with the global
slot time flags as that is maintained. One driver (iwi) used the per-VAP
flags instead of the ic flags, so now that driver will work properly.
This unblocks some ath10k porting work as the firmware takes the slot time
configuration per-VAP rather than globally, and some firmware handles
STA+AP and STA+STA (on same/different channels) configurations where
the firmware will switch slot time as appropriate.
Tested:
* AR9380, STA/AP mode
* AR9880 (ath10k), STA mode
net80211 currently doesn't negotiate A-MSDU in A-MPDU during ADDBA.
I've added the field in net80211 and this commit:
* Prints out the ADDBA field value during ADDBA;
* Adds some comments around where I need to follow up with some
negotiation logic.
Right now we don't have a driver flag anywhere which controls
whether A-MSDU in A-MPDU is allowed. I know it works (I have it
manually turned on at home on a couple test APs, heh!) but
I can't flip it on until we can negotiate it.
Tested:
* AR9380, STA/AP mode, printing out ADDBA requests
These are from the linux iwlwifi driver ;the default use smaller
maximum AMPDUs (8k) and a much smaller density (none.) The latter
could cause stability issues.
Tested:
* Tested on Intel 6300, STA mode.
Differential Revision: https://reviews.freebsd.org/D25113
Now that I have A-MSDU and A-MPDU coexisting together, we need to actually
announce if (a) it's permitted and (b) figure out if we should use it
when transmitting.
This just adds the field; it doesn't yet include it in ADDBA exchanges.
My AMD Ryzen system has 4 AHCI controllers, each supporting 16 MSI vectors.
Since two of the controllers have only one SATA port, limit to single MSI
saves system 30 interrupt vectors for free.
It may be possible to also limit number of MSI vectors to 4 and 8 for the
other two controllers, but according to the AHCI specification after that
controllers may revert to only one vector, that would be a bigger loss to
risk.
MFC after: 2 weeks
requires that new data on growing files be accessible. Thus, the
the fsyncdata() system call must update the on-disk inode when the
size of the file has changed.
This commit adds another inode update flag, IN_SIZEMOD, that gets
set any time that the file size changes. If either the IN_IBLKDATA
or the IN_SIZEMOD flag is set when fdatasync() is called, the
associated inode is synchronously written to disk. We could have
overloaded the IN_IBLKDATA flag to also track size changes since
the only (current) use case for these flags are for fsyncdata(),
but it does seem useful for possible future uses to separately
track the file size changes and the inode block pointer changes.
Reviewed by: kib
MFC with: -r361785
Differential revision: https://reviews.freebsd.org/D25072
I'm trying to chase down more weird "I am not doing an incremental scan
when being asked" issues so these debugging statements help.
Notably, I've added more debugging around reasons why the scan is skipped -
eg because the cache is considered hot.
This should be a no-op unless you care about the debugging output!
This sends a probe request after IBSS node discovery through
beacon frames. This allows things like HT and VHT capabilities
to be "negotiated" in adhoc mode.
It is .. kinda fire and pray - this isn't retried after discovery
so it's quite possible that nodes occasionally don't come up with
HT/VHT rate upgrades. At some point it may be a fun side project
to add support for retrying these probe requests/negotiations
after IBSS node discovery.
Tested:
* tested with multiple ath(4) NICs in 11n mode.
Differential Revision: https://reviews.freebsd.org/D24979
At this point, AES is the more common name for Rijndael128. setkey(8)
will still accept the old name, and old constants remain for
compatiblity.
Reviewed by: cem, bcr (manpages)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24964
It was pointed out to me that this is the convention for documenting upgrade
instructions, rather than just leaving the instructions in the commit message.
It's possible these commands won't be used again before we transition to git,
but then at least they'll give a path forward for whoever touches this next.
Suggested by: lwhsu
This change introduces Comet Lake Mobile Platform support in the e1000
driver along with shared code patches described below.
- Cast return value of e1000_ltr2ns() to higher type to avoid overflow
- Remove useless statement of assigning act_offset
- Add initialization of identification LED
- Fix flow control setup after connected standby:
After connected standby the driver blocks resets during
"AdapterStart" and skips flow control setup. This change adds
condition in e1000_setup_link_ich8lan() to always setup flow control
and to setup physical interface only when there is no need to block
resets.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D25035
KTLS encryption requests for file-backed data such as from sendfile(2)
require the encrypted data to be stored in a separate buffer from the
unencrypted file input data. Previously the OCF backend for KTLS
manually copied the data from the input buffer to the output buffer
before queueing the crypto request. Now the OCF backend will use a
separate output buffer for such requests and avoid the copy. This
mostly helps when an async co-processor is used by saving CPU cycles
used on the copy.
Reviewed by: gallatin (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
We use these to compile libefivar. The particular motivation for this update is
the inclusion of the RISC-V machine definitions that allow us to build the
library on the platform. This support could easily have been submitted as a
small local diff, but the timing of the release coincided with this work, and
it has been over 3 years since these sources were initially imported.
Note that this comes with a license change from regular BSD 2-clause to the
BSD+Patent license. This has been approved by core@ for this particular
project [1].
As with the original import, we retain only the subset of headers that we
actually need to build libefivar. I adapted imp@'s process slightly for this
update:
# Generate list of the headers needed to build
cp -r ../vendor/edk2/dist/MdePkg/Include sys/contrib/edk2
cd lib/libefivar
make
pushd `make -V .OBJDIR`
cat .depend*.o | grep sys/contrib | cut -d' ' -f 3 |
sort -u | sed -e 's=/full/path/sys/contrib/edk2/==' > /tmp/xxx
popd
# Merge the needed files
cd ../../sys/contrib/edk2
svn revert -R .
for i in `cat /tmp/xxx`; do
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/$i $i
done
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/MdePkg.dec MdePkg.dec
[1] https://www.freebsd.org/internal/software-license.html
This commit adds the priv(9) that waters down the sysctl to make it only
allow read(2) of a dirfd by the system root. Jailed root is not allowed, but
jail policy and superuser policy will abstain from allowing/denying it so
that a MAC module can fully control the policy.
Such a MAC module has been written, and can be found at:
https://people.freebsd.org/~kevans/mac_read_dir-0.1.0.tar.gz
It is expected that the MAC module won't be needed by many, as most only
need to do such diagnostics that require this behavior as system root
anyways. Interested parties are welcome to grab the MAC module above and
create a port or locally integrate it, and with enough support it could see
introduction to base. As noted in mac_read_dir.c, it is released under the
BSD 2 clause license and allows the restrictions to be lifted for only
jailed root or for all unprivileged users.
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
Differential Revision: https://reviews.freebsd.org/D24596
Historically, we've allowed read() of a directory and some filesystems will
accommodate (e.g. ufs/ffs, msdosfs). From the history department staffed by
Warner: <<EOF
pdp-7 unix seemed to allow reading directories, but they were weird, special
things there so I'm unsure (my pdp-7 assembler sucks).
1st Edition's sources are lost, mostly. The kernel allows it. The
reconstructed sources from 2nd or 3rd edition read it though.
V6 to V7 changed the filesystem format, and should have been a warning, but
reading directories weren't materially changed.
4.1b BSD introduced readdir because of UFS. UFS broke all directory reading
programs in 1983. ls, du, find, etc all had to be rewritten. readdir() and
friends were introduced here.
SysVr3 picked up readdir() in 1987 for the AT&T fork of Unix. SysVr4 updated
all the directory reading programs in 1988 because different filesystem
types were introduced.
In the 90s, these interfaces became completely ubiquitous as PDP-11s running
V7 faded from view and all the folks that initially started on V7 upgraded
to SysV. Linux never supported this (though I've not done the software
archeology to check) because it has always had a pathological diversity of
filesystems.
EOF
Disallowing read(2) on a directory has the side-effect of masking
application bugs from relying on other implementation's behavior
(e.g. Linux) of rejecting these with EISDIR across the board, but allowing
it has been a vector for at least one stack disclosure bug in the past[0].
By POSIX, this is implementation-defined whether read() handles directories
or not. Popular implementations have chosen to reject them, and this seems
sensible: the data you're reading from a directory is not structured in some
unified way across filesystem implementations like with readdir(2), so it is
impossible for applications to portably rely on this.
With this patch, we will reject most read(2) of a dirfd with EISDIR. Users
that know what they're doing can conscientiously set
bsd.security.allow_read_dir=1 to allow read(2) of directories, as it has
proven useful for debugging or recovery. A future commit will further limit
the sysctl to allow only the system root to read(2) directories, to make it
at least relatively safe to leave on for longer periods of time.
While we're adding logic pertaining to directory vnodes to vn_io_fault, an
additional assertion has also been added to ensure that we're not reaching
vn_io_fault with any write request on a directory vnode. Such request would
be a logical error in the kernel, and must be debugged rather than allowing
it to potentially silently error out.
Commented out shell aliases have been placed in root's chsrc/shrc to promote
awareness that grep may become noisy after this change, depending on your
usage.
A tentative MFC plan has been put together to try and make it as trivial as
possible to identify issues and collect reports; note that this will be
strongly re-evaluated. Tentatively, I will MFC this knob with the default as
it is in HEAD to improve our odds of actually getting reports. The future
priv(9) to further restrict the sysctl WILL NOT BE MERGED BACK, so the knob
will be a faithful reversion on stable/12. We will go into the merge
acknowledging that the sysctl default may be flipped back to restore
historical behavior at *any* point if it's warranted.
[0] https://www.freebsd.org/security/advisories/FreeBSD-SA-19:10.ufs.asc
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
MFC after: 1 month (note the MFC plan mentioned above)
Relnotes: absolutely, but will amend previous RELNOTES entry
Differential Revision: https://reviews.freebsd.org/D24596
That assumption should be true when superio(4) uses the hardware
exlusively. But it turns out to not hold on some real systems.
So, err on the side of correctness rather than performance.
Clear current_ldn in sio_conf_exit.
Reported by: bz
Tested by: bz
MFC after: 1 week
The fdatasync() description in POSIX specifies that
all I/O operations shall be completed as defined for synchronized I/O
data integrity completion.
and then the explanation of Synchronized I/O Data Integrity Completion says
The write is complete only when the data specified in the write
request is successfully transferred and all file system
information required to retrieve the data is successfully
transferred.
For UFS this means that all pointers must be on disk. Indirect
pointers already contribute to the list of dirty data blocks, so only
direct blocks and root pointers to indirect blocks, both of which
reside in the inode block, should be taken care of. In ffs_balloc(),
mark the inode with the new flag IN_IBLKDATA that specifies that
ffs_syncvnode(DATA_ONLY) needs a call to ffs_update() to flush the
inode block.
Reviewed by: mckusick
Discussed with: tmunro
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25072
As with r361769 (man page), PROT_* are properly called protections, not
permissions.
MFC after: 1 week
MFC with: r361769
Sponsored by: The FreeBSD Foundation
This specifically fixes that TX frames are large enough now to hold a 3900 odd
byte AMSDU (the little ones); me flipping it on earlier messed up transmit!
Tested:
* if_run, STA mode, TX/RX TCP/UDP iperf. TCP is now back to normal and
correctly does ~ 3200 byte AMSDU/fast frames (2x1600ish byte MSDUs).
This flips on basic 11n for 2GHz/5GHz station operation.
* It flips on HT20 and MCS rates;
* It enables A-MPDU decap - the payload format is a bit different;
* It does do some basic checks for HT40 but I haven't yet flipped on
HT40 support;
* It enables software A-MSDU transmit; I honestly don't want to make
A-MPDU TX work and there are apparently issues with QoS and A-MPDU TX.
So I totally am ignoring A-MPDU TX;
* MCS rate transmit is fine.
I haven't:
* A-MPDU TX, as I said above;
* made radiotap work fully;
* HT40;
* short-GI support;
* lots of other stuff that honestly no-one is likely to use.
But! Hey, this is another ye olde 11n USB NIC that now works pretty OK
in 11n rates. A-MPDU receive seems fine enough given it's a draft-n
device from before 2010.
Tested:
* Ye olde UB82 Test NIC (AR9170 + AR9104) - 2GHz/5GHz
This change prevents a race that happens when rxsync dequeues
N-1 rx packets (with N being the size of the netmap rx ring).
In this situation, the loop exits without re-enabling the
rx interrupts, thus causing the VQ to stall.
MFC after: 1 week
The new index tracks the next netmap slot that is going
to be enqueued into the virtqueue. The index is necessary
to prevent the receive VQ and the netmap rx ring from going
out of sync, considering that we never enqueue N slots, but
at most N-1. This change fixes a bug that causes the VQ
and the netmap ring to go out of sync after N-1 packets
have been received.
MFC after: 1 week
connected to or sent to. This was fond when working with Michael
Tuexen and Skyzaller. Skyzaller seems to want to use either of
these two addresses to connect to at times. And it really is
an error to do so, so lets not allow that behavior.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D24852
of them have to do with TFO. Even the default stack
had one of the issues:
1) We need to make sure for rack that we don't advance
snd_nxt beyond iss when we are not doing fast open. We
otherwise can get a bunch of SYN's sent out incorrectly
with the seq number advancing.
2) When we complete the 3-way handshake we should not ever
append to reassembly if the tlen is 0, if TFO is enabled
prior to this fix we could still call the reasemmbly. Note
this effects all three stacks.
3) Rack like its cousin BBR should track if a SYN is on a
send map entry.
4) Both bbr and rack need to only consider len incremented on a SYN
if the starting seq is iss, otherwise we don't increment len which
may mean we return without adding a sendmap entry.
This work was done in collaberation with Michael Tuexen, thanks for
all the testing!
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D25000
Enabling TCP-FASTOPEN on an end-point which is in a state other than
CLOSED or LISTEN, is a bug in the application. So it should not work.
Also the TCP code does not (and needs not to) handle this.
While there, also simplify the setting of the TF_FASTOPEN flag.
This issue was found by running syzkaller.
Reviewed by: rrs
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D25115
After r339550 tunneling interfaces have started handle appearing and
disappearing of ingress IP address on the host system.
When such interfaces are moving into VNET jail, they lose ability to
properly handle ifaddr_event_ext event. And this leads to need to
reconfigure tunnel to make it working again.
Since moving an interface into VNET jail leads to removing of all IP
addresses, it looks consistent, that tunnel configuration should also
be cleared. This is what will do if_reassing method.
Reported by: John W. O'Brien <john saltant com>
MFC after: 1 week
On 64-bit platforms, the two short fields in `struct tmpfs_fid` are padded to
the 64-bit alignment of the long field. This pushes the offsets of the
subsequent fields by 4 bytes and makes `struct tmpfs_fid` bigger than
`struct fid`. `tmpfs_vptofh()` casts a `struct fid *` to `struct tmpfs_fid *`,
causing 4 bytes of adjacent memory to be overwritten when the struct fields are
set. Through several layers of indirection and embedded structs, the adjacent
memory for one particular call to `tmpfs_vptofh()` happens to be the stack
canary for `nfsrvd_compound()`. Half of the canary ends up being clobbered,
going unnoticed until eventually the stack check fails when `nfsrvd_compound()`
returns and a panic is triggered.
Instead of duplicating fields of `struct fid` in `struct tmpfs_fid`, narrow the
struct to cover only the unique fields for tmpfs and assert at compile time
that the struct fits in the allotted space. This way we don't have to
replicate the offsets of `struct fid` fields, we just use them directly.
Reviewed by: kib, mav, rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25077
The netmap_rx_irq() function normally wakes up user-space threads
waiting for more packets. In this case, it is not necessary to
call it under the driver queue lock. However, if the interface is
attached to a VALE switch, netmap_rx_irq() ends up calling rxsync
on the interface (see netmap_bwrap_intr_notify()). Although
concurrent rxsyncs are serialized through the kring lock
(see nm_kr_tryget()), the lock acquire operation is not blocking.
As a result, it may happen that netmap_rx_irq() is called on
an RX ring while another instance is running, causing the
second call to fail, and received packets stall in the receive VQ.
We fix this issue by calling netmap_irx_irq() under the VQ lock.
MFC after: 1 week
The netmap_rx_irq() function may return NM_IRQ_RESCHED to inform the
driver that more work is pending, and that netmap expects netmap_rx_irq()
to be called again as soon as possible.
This change implements this behaviour in the vtnet driver.
MFC after: 1 week
When I did some bus_dma cleanup in r320528, I brought forward some sketchy
WITNESS checks from the prior x86 busdma wrappers, instead of recognizing
them as technical debt and just dropping them. Two of these were removed in
r346351 and r346851, but one remains in bounce_bus_dmamem_alloc(). This check
could be constrained to only apply in the BUS_DMA_NOWAIT case, but it's cleaner
to simply remove it and rely on the checks already present in the sleepable
allocation paths used by this function.
While here, remove another unnecessary witness check in bus_dma_tag_create
(the tag is always allocated with M_NOWAIT), and fix a couple of typos.
Reported by: cem
Reviewed by: kib, cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25107
* Set the tx/rx chains based on the existing MIMO eeprom reads
* Add 3-chain rates
Tested:
* MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), 2g/5g STA
* MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R), 2g/5g STA
is provably never null. Restructure the surrounding code just enough
to make the non-nullness obvious.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25089
Now that I'm a proud owner of an ASUS USB-N66, I can test 2G/5G and
3-stream configurations.
For now, just flip on 5G HT rates. I've tested this in both
5G HT20 and 5G 11a modes. It's still one stream for now until
we verify that the number of streams reported (ie the MIMO below)
is actually the number of 11n streams, NOT the number of antennas.
(They don't have to match! You can have more antennas than MIMO
streams!)
Tested:
* run0: MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R)
r361601 implemented basic support for cleaing the console history buffer.
But after clearing the history buffer, it's not especially useful to be
able to scroll back through that buffer, or for the cursor position to
remain at (very likely) the bottom of the screen.
PR: 224436
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25079
which happens on some laptops after returning to legacy multiplexing mode
at initialization stage.
PR: 242542
Reported by: Felix Palmen <felix@palmen-it.de>
MFC after: 1 week
IPSEC_SUPPORT can currently only cope with either IPSEC || IPSEC_SUPPORT,
not both. Refrain from building if IPSEC is set, as the resulting module
won't be able to load anyways if it's built into the kernel.
KERN_OPTS is safe here; for tied modules, it will reflect the kernel
configuration. For untied modules, it will defer to whatever is set in
^/sys/conf/config.mk, which doesn't set IPSEC for modules. The latter
situation has some risk to it for uncommon scenarios, but such is the life
of untied kernel modules.
Reported by: jenkins (a lot), O. Hartmann (once)
Generally discussed with: imp, jhb
Currently there is no easy way of subscribing for the routing table changes.
The only existing way is to set ifa_rtrequest callback in the each protocol
ifaddr, which is not convenient or extandable.
This change provides generic notification subscription mechanism, that will
replace current ifa_rtrequest one and allow other applications such as
accelerated routing lookup modules subscribe for the changes.
In particular, this change provides 2 hooks: 1) synchronous one
(RIB_NOTIFY_IMMEDIATE), called under RIB_WLOCK, which ensures exact
ordering of the changes and 2) async one, (RIB_NOTIFY_DELAYED)
that is called after the change w/o holding locks. The latter one does not
provide any notification ordering guarantee.
Differential Revision: https://reviews.freebsd.org/D25070
The main driver for the change is the need to improve notification mechanism.
Currently callers guess the operation data based on the rtentry structure
returned in case of successful operation result. There are two problems with
this appoach. First is that it doesn't provide enough information for the
upcoming multipath changes, where rtentry refers to a new nexthop group,
and there is no way of guessing which paths were added during the change.
Second is that some rtentry fields can change during notification and
protecting from it by requiring customers to unlock rtentry is not desired.
Additionally, as the consumers such as rtsock do know which operation they
request in advance, making explicit add/change/del versions of the functions
makes sense, especially given the functions don't share a lot of code.
With that in mind, introduce rib_cmd_info notification structure and
rib_<add|del|change>_route() functions, with mandatory rib_cmd_info pointer.
It will be used in upcoming generalized notifications.
* Move definitions of the new functions and some other functions/structures
used for the routing table manipulation to a separate header file,
net/route/route_ctl.h. net/route.h is a frequently used file included in
~140 places in kernel, and 90% of the users don't need these definitions.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25067
The main driver for the change is the need to improve notification mechanism.
Currently callers guess the operation data based on the rtentry structure
returned in case of successful operation result. There are two problems with
this appoach. First is that it doesn't provide enough information for the
upcoming multipath changes, where rtentry refers to a new nexthop group,
and there is no way of guessing which paths were added during the change.
Second is that some rtentry fields can change during notification and
protecting from it by requiring customers to unlock rtentry is not desired.
Additionally, as the consumers such as rtsock do know which operation they
request in advance, making explicit add/change/del versions of the functions
makes sense, especially given the functions don't share a lot of code.
With that in mind, introduce rib_cmd_info notification structure and
rib_<add|del|change>_route() functions, with mandatory rib_cmd_info pointer.
It will be used in upcoming generalized notifications.
* Move definitions of the new functions and some other functions/structures
used for the routing table manipulation to a separate header file,
net/route/route_ctl.h. net/route.h is a frequently used file included in
~140 places in kernel, and 90% of the users don't need these definitions.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25067
Due to the ordering of the powerpc64 linker script, we were discarding
all notes before emitting .note.gnu.build-id. This had the effect of
generating an empty build id section and breaking the kern.build_id
sysctl added in r348611.
powerpc and powerpcspe are uneffected.
PR: 246430
MFC after: 3 days
Sponsored by: Tag1 Consulting, Inc.
vfs_export requires security flavors be explicitly listed when
exporting as of r360900.
Use the default AUTH_SYS flavor when converting old export args to
ensure compatibility with the legacy mount syscall.
Reported by: rmacklem
Reviewed by: rmacklem
Approved by: mav (mentor)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25045
netmap assumes the one "slot" is left unused to distinguish
the empty ring and full ring conditions. This assumption was
violated by vtnet_netmap_rxq_populate().
MFC after: 1 week
The functionality contained in this function is duplicated,
as it is already available in vtnet_txq_free_mbufs()
and vtnet_rxq_free_mbufs().
MFC after: 1 week
The vtnet_netmap_rxq_populate() function erroneously assumed
that kring->nr_hwcur = 0, i.e. the kring was in the initial
state. However, this is not always the case: for example,
when a vtnet reinit is triggered by some changes in the
interface flags or capenable.
This patch changes the behaviour of vtnet_netmap_kring_refill()
so that it always starts publishing the netmap buffers starting
from the current value of kring->nr_hwcur.
MFC after: 1 week
The field was added in r141137 in 2005 and is unused.
It avoidably grows a struct which is NOFREE and easily gets hundreds of
thousands of instances.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25036
This is something I added a few years ago to handle resyncing the beacon if
we miss a beacon or need to sync after association/reassociation/powersave.
However, if we're doing STA+AP mode (eg DWDS) then we don't want
to reprogram the beacons here; this may upset normal AP operation.
I missed checking for the sc->sc_swbmiss flag so I was reinitialising
the beacon timers after every beacon miss / TSFOOR option, and
that isn't likely good.
This plus ensuring that STA's are created with "-beacon" to disable
BMISS/TSFOOR processing will hopefully quieten some of the issues
I've seen with missed beacons / TSFOOR (out of range) interrupts
coming in when operating in STA mode.
Tested:
* AR9380/AR9580, STA+AP modes
The trampoline code used for loading gzipped a.out kernels on arm was
removed in r350436. A portion of this code allowed for DDB to find the
symbol tables when booting without loader(8), and some of this was
untouched in the removal. Remove it now.
Differential Revision: https://reviews.freebsd.org/D24950
