Rather then using the racy useracc() followed by direct access to
userspace memory, perform a copyin() and use the result if it succeeds.
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24410
The sshd service is using ssh-keygen to generate missing SSH keys.
If ssh-keygen is missing, it prints the following message:
> /etc/rc.d/sshd: WARNING: /usr/bin/ssh-keygen does not exist.
It makes sense when the key is not generated yet and
cannot be created because ssh-keygen is missing.
The problem is that even if the key is present on the host,
the sshd service would still warn about missing ssh-keygen
(even though it does not need it).
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23911
Hide debug print showing use of sign extended ioctl command argument
under INVARIANTS. The print is available to all and can easily fill
up the logs.
No functional change intended.
MFC after: 1 week
Sponsored by: Mellanox Technologies
If the fdt node doesn't have a cd-gpios properties or if the node is set
as non-removable we do not init the card detection timeout task as it is
useless so don't schedule it too.
MFC after: 1 month
X-MFC-With: r359924
Switch uRPF to use specific fib(9)-provided uRPF.
Switch MSS calculation to the latest fib(9) kpi.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D24386
Update ip6_forward() internals to use deembedded IPv6 addresses
to simplify calls to the new KPI and prepare for the future
scope-embedding cleanup.
Add in6_get_unicast_scopeid() and in6_set_unicast_scopeid() scopeid
operation functions tailored for unicast processing.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24334
This new KPI, validate_uuid, strictly validates the formatting of the input
UUID and, optionally, populates a given struct uuid.
As noted in the header, the key differences are that the new KPI won't
recognize an empty string as a nil UUID and it won't do any kind of semantic
validation on it. Also key is that populating a struct uuid is optional, so
the caller doesn't necessarily need to allocate a bogus one on the stack
just to validate the string.
This KPI has specifically been broken out in support of D24288, which will
preload /etc/hostid in loader so that early boot hostuuid users (e.g.
anything that calls ether_gen_addr) can have a valid hostuuid to work with
once it's been stashed in /etc/hostid.
This fixes a panic that would occur when the timer tried to close a
stale socket.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 1 week
Sponsored by: Chelsio Communications
Print the failed instruction stream as a contiguous stream of hex. This
is closer to something you could throw at a disassembler than 0xHH 0xHH
0xHH.
Also, use the debug.h 'raw' stdio-aware printf helper to avoid the
cascading
line
effect.
Add an implementatation of the 'Virtual Machine Generation ID' spec to
Bhyve. The spec provides a randomly generated GUID (at bhyve start) in
device memory, along with an ACPI device with _CID VM_Gen_Counter and ADDR
evaluating to a Package pointing at that GUID.
A GPE is defined which Notifies the ACPI Device when the generation changes
(such as when a snapshot is rolled back). At this time, Bhyve does not
support snapshotting, so the GPE is never actually raised.
Suggested by: rpokala
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D23165
To allow more general use of the bootrom region, separate initialization from
allocation, and allocation from loading a file.
The bootrom segment is the high 16MB of the low 4GB region.
Each allocation in the segment creates a new mapping with specified protection.
By default, allocation begins at the low end of the range. However, the
BOOTROM_ALLOC_TOP flag is provided to locate a provided bootrom in the high
region it is expected to be in.
The existing ROM-file loading code is refactored to use the new interface.
Reviewed by: grehan (earlier version)
Differential Revision: https://reviews.freebsd.org/D24422
It is not valid to pass BUS_SPACE_UNRESTRICTED to bus_dma_tag_create()'s
nsegments parameter as it is interpreted as a very large segment count.
Subsequent allocation operations on the tag will preallocate some multiple of
that count. BUS_SPACE_UNRESTRICTED therefore indicates something like:
malloc(infinity).
Discussed with: bcr, jhb (earlier version)
This removes support for reading and writing volumes using the
following algorithms:
- Triple DES
- Blowfish
- MD5 HMAC integrity
In addition, this commit adds an explicit whitelist of supported
algorithms to give a better error message when an invalid or
unsupported algorithm is used by an existing volume.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24343
closefrom has been converted to close_range internally; remediation is
underway for this, marking it as an expected fail for now while proper
course is determined.
PR: 245625
I did not realize that zero length attributes are allowed, but they are.
This patch fixes the NFSv4.2 client and server to handle zero length
extended attributes correctly.
Submitted by: Frank van der Linden <fllinden@amazon.com> (earlier version)
Reported by: Frank van der Linden <fllinder@amazon.com>
One of the goals of the new routing KPI defined in r359823 is to entirely hide
`struct rtentry` from the consumers. Doing so will allow to improve routing
subsystem internals and deliver features more easily. This change is one of
the ongoing changes to eliminate direct struct rtentry field accesses.
It introduces rtfree_func() wrapper around RTFREE() and reorganises nd6 notification
code to avoid accessing most of the rtentry fields.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24404
There's no point in pre-checking that we can access the user's rmtp
pointer before we do it in copyout().
While here, improve style(9) compliance.
Reviewed by: imp
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24409
Copy the CP, PTRIN, etc macros from freebsd32.h into a sys/abi_compat.h
and replace existing definitation with includes where required. This
eliminates duplicate code and allows Linux and FreeBSD compatability
headers to be included in the same files.
Input from: cem, jhb
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24275
The upstream DTS now include the thermal device node and the SID
calibration entry.
Update our driver to cope with this change and remove the DTB
overlays that aren't needed anymore.
MFC after: 2 months
X-MFC-With: r359934
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
MSS in two steps and try each candidate two times. However, if two
candidates are the same (which is the case in TCP/IPv6), this candidate
was tested four times. This patch ensures that each candidate actually
reduced the MSS and is only tested 2 times. This reduces the time window
of missclassifying a temporary outage as an MTU issue.
Reviewed by: jtl
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24308
The fdt properties are now parsed via the help of mmc_fdt_helper functions.
This also adds card detection.
Note that on some boards (like the Pine64) card detection is broken due to
a missing resistor on the cd pin.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23268
the dts to find the supported speeds and the regulators.
Not all DTS have every settings properly defined so host controller
will still have to add some caps themselves.
It also add a mmc_fdt_gpio_setup function which will read the cd-gpios
property and register it as the CD pin.
If the pin support interrupts one will be registered and the cd_helper
function will be called.
If the pin doesn't support interrupts the internal taskqueue will poll
for change and call the same cd_helper function.
mmc_fdt_gpio_setup will also parse the wp-gpio property and MMC drivers
can know the write-protect pin value by calling the
mmc_fdt_gpio_get_readonly function.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23267
sonewconn() emits debug-level messages when a listen socket's queue
overflows. Currently, sonewconn() tracks overflows on a global basis. It
will only log one message every 60 seconds, regardless of how many sockets
experience overflows. And, when it next logs at the end of the 60 seconds,
it records a single message referencing a single PCB with the total number
of overflows across all sockets.
This commit changes to per-socket overflow tracking. The code will now
log one message every 60 seconds per socket. And, the code will provide
per-socket queue length and overflow counts. It also provides a way to
change the period between log messages using a sysctl.
Reviewed by: jhb (previous version), bcr (manpages)
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24316
When a socket's listen queue overflows, sonewconn() emits a debug-level
log message. These messages are sometimes useful to systems administrators
in highlighting a process which is not keeping up with its listen queue.
This commit attempts to enhance the usefulness of this message by printing
more details about the socket's address. If all else fails, it will at
least print the domain name of the socket.
Reviewed by: bz, jhb, kbowling
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24272
While the original implementation of unmapped mbufs was a large
step forward in terms of reducing cache misses by enabling mbufs
to carry more than a single page for sendfile, they are rather
cache unfriendly when accessing the ext_pgs metadata and
data. This is because the ext_pgs part of the mbuf is allocated
separately, and almost guaranteed to be cold in cache.
This change takes advantage of the fact that unmapped mbufs
are never used at the same time as pkthdr mbufs. Given this
fact, we can overlap the ext_pgs metadata with the mbuf
pkthdr, and carry the ext_pgs meta directly in the mbuf itself.
Similarly, we can carry the ext_pgs data (TLS hdr/trailer/array
of pages) directly after the existing m_ext.
In order to be able to carry 5 pages (which is the minimum
required for a 16K TLS record which is not perfectly aligned) on
LP64, I've had to steal ext_arg2. The only user of this in the
xmit path is sendfile, and I've adjusted it to use arg1 when
using unmapped mbufs.
This change is almost entirely mechanical, except that we
change mb_alloc_ext_pgs() to no longer allow allocating
pkthdrs, the change to avoid ext_arg2 as mentioned above,
and the removal of the ext_pgs zone,
This change saves roughly 2% "raw" CPU (~59% -> 57%), or over
3% "scaled" CPU on a Netflix 100% software kTLS workload at
90+ Gb/s on Broadwell Xeons.
In a follow-on commit, I plan to remove some hacks to avoid
access ext_pgs fields of mbufs, since they will now be in
cache.
Many thanks to glebius for helping to make this better in
the Netflix tree.
Reviewed by: hselasky, jhb, rrs, glebius (early version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24213
Similar to mmap'ing vnodes, posixshm should count any mapping where maxprot
contains VM_PROT_WRITE (i.e. fd opened r/w with no write-seal applied) as
writable and thus blocking of any write-seal.
The memfd tests have been amended to reflect the fixes here, which notably
includes:
1. Fix for error return bug; EPERM is not a documented failure mode for mmap
2. Fix rejection of write-seal with active mappings that can be upgraded via
mprotect(2).
Reported by: markj
Discussed with: markj, kib
