shutdown procedures (which have a duration of more than 120 seconds).
We have two user-space affecting shutdown timeouts: a "soft" one in
/etc/rc.shutdown and a "hard" one in init(8). The first one can be
configured via /etc/rc.conf variable "rcshutdown_timeout" and defaults
to 30 seconds. The second one was originally (in 1998) intended to be
configured via sysctl(8) variable "kern.shutdown_timeout" and defaults
to 120 seconds.
Unfortunately, the "kern.shutdown_timeout" was declared "unused" in 1999
(as it obviously is actually not used within the kernel itself) and
hence was intentionally but misleadingly removed in revision 1.107 from
init_main.c. Kernel sysctl(8) variables are certainly a wrong way to
control user-space processes in general, but in this particular case the
sysctl(8) variable should have remained as it supports init(8), which
isn't passed command line flags (which in turn could have been set via
/etc/rc.conf), etc.
As there is already a similar "kern.init_path" sysctl(8) variable which
directly affects init(8), resurrect the init(8) shutdown timeout under
sysctl(8) variable "kern.init_shutdown_timeout". But this time document
it as being intentionally unused within the kernel and used by init(8).
Also document it in the manpages init(8) and rc.conf(5).
Reviewed by: phk
MFC after: 2 weeks
- Replace 'process' with 'thread' everywhere.
- Update several places to note that that the fact that default mutexes
may adaptively spin isn't necessarily MD, but is just part of the
implementation as a whole.
- Clarify the text about MTX_SPIN mutexes only being appropriate for
INTR_FAST interrupts or other low level scheduler code to make the
jargon more FreeBSD-ish rather than BSD/OS-ish.
- Also, note that it is possible that interrupts aren't blocked but just
deferred when a spin lock is held (the whole blocked vs. deferred bit is
an MD implementation detail).
- Remove statements saying that spin locks must be released in the exact
opposite order that they were acquired. This stopped being true several
years ago when we first added critical sections that stored their state
in the current thread rather than in struct mtx.
- Note that a mutex must be initialized before it is passed to any other
mutex function, not just mtx_lock.
- Clarify that mtx_trylock() only operates on MTX_DEF mutexes.
- Simplify the text about possible preemption during a mtx_unlock().
- Use complete English sentences in place of phrases in a few places.
- Clarify that it isn't ever safe to sleep with a mutex held. The kernel
tends to panic when you do that.
Requested by: scottl (7)
MFC after: 3 days
- The first "alias" "Yes" should be "No**".
- Made "builtin echo command" consistent with csh and sh manpages.
- In group of 3 interactive commands, 2 used .Pa instead of .Ic.
- "Name" section now has "builtin" and "built-in" for better apropos.
- Added these builtins: !, %, ., :, @, {, }, local, return
PR: docs/85065
Approved by: keramida
MFC after: 3 days
appear in tmpmfs and varmfs default flags explicitly.
Explain why -M is good for these file systems (it maximizes
performance and makes the system more stable at low memory
conditions by reducing the chance of thrashing.)
Bump .Dd accordingly.
MFC after: 3 days
of the form "REFUSE foo" in portsnap.conf will result in parts of the
tree matching "^foo" being (a) not extracted by "portsnap extract", (b)
not updated by "portsnap update", and (c) not having any patches or new
ports downloaded by "portsnap fetch" or "portsnap cron". The example
shown in portsnap.conf demonstrates ignoring all the language categories.
As mentioned in portsnap.conf.5, the use of an imcomplete ports tree is
not officially supported; but this is something which many users have
requested, so I'm adding it anyway.
PR: bin/85619 (but not the patch provided therein)
MFC after: 1 month
o note all pci/cardbus parts are supported (modulo hal updates)
o use ath_rate_sample instead of ath_rate_onoe
o note SuperG support is missing
o note WPA not supported on 5210
o remove stuff about needing a better tx rate control algorithm
MFC after: 3 days
Files used both "securelevel" and either "secure level" or
"security level"; all are now "security level".
PR: docs/84266
Submitted by: garys
Approved by: keramida
MFC after: 3 days
now run on any interface.
- Add a new ifconfig_<ifn> keyword, NOAUTO which prevents configuration
of an interface at boot or via /etc/pccard_ether. This allows
/etc/rc.d/netif to be used to start and stop an interface on a purely
manual basis. The decision to affect pccard_ether may be revisited at
a later date.
Requested by: imp, gallatin (removable_interfaces)
Discussed with: sam, Randy Bush (NOAUTO)
list of diagnostic messages sorted.
Document the recently introduced EOPNOTSUPP error return. Repair
sort ordering for the list of error descriptions.
MFC after: 3 days
packet in an ICMP reply. The minimum of 8 bytes is internally
enforced. The maximum quotation is the remaining space in the
reply mbuf.
This option is added in response to the issues raised in I-D
draft-gont-icmp-payload-00.txt.
MFC after: 2 weeks
Spnsored by: TCP/IP Optimizations Fundraise 2005
the IP address the packet came through in. This is useful for routers
to show in traceroutes the actual path a packet has taken instead of
the possibly different return path.
The new sysctl is named net.inet.icmp.reply_from_interface and defaults
to off.
MFC after: 2 weeks
does not return a list of ASCII NUL terminated strings.
Instead, a list of attribute names is returned, where each
list entry consists of one byte for the name length, followed
by the name, without a terminating ASCII NUL.
This in similar to change 1.17 to extattr_get_file.2
Reviewed by: rwatson, ru
settings can be displayed, near the end of the DESCRIPTION section,
immediately after the paragraph that describes how they can be set.
Add a reference to printenv(1) too (and the ``printenv'' csh builtin).
Submitted by: Gary W. Swearingen <garys@opusnet.com>
PR: docs/85008
rc.d/geli - configures encryption (ask for passphrases, etc.);
rc.d/geli2 - is called after file systems are mounted and mark devices for
detach on last close.
Sponsored by: Wheel Sp. z o.o.
http://www.wheel.pl
MFC after: 3 days
- Document how an event looks like that is received by devd(8) from acpi_ibm(4)
- Document the event codes as they occur on a T41p
- Add a note about sysctl.conf and an Xref to it
- Add an example section providing an example script and an entry for
devd.conf. This is an adapted version of the one in acpi_fujitsu(4).
- s/Fn-F4/Fn+F4/ for consistency sake
- Add a button description where refering to a T41p, remove it otherwise,
since it might vary from model to model
- Bump .Dd
Thanks for improvements to: brueffer, ru
Approved by: brueffer
fast, lightweight, and generally good way for users to keep their
ports trees up to date.
This is version 0.9.4 from the ports tree (sysutils/portsnap) with
the following changes:
1. The experimental pipelined http code is enabled. No seatbelts
in -CURRENT. (^_^)
2. The working directory has moved from /usr/local/portsnap to
/var/db/portsnap (as discussed on -arch two days ago).
3. Portsnap now fetches a list of mirrors (distributed as DNS SRV
records) and selects one randomly. This should help to avoid the
uneven loading which plagues the cvsup mirror network.
4. The license is now 2-clause BSD instead of 3-clause BSD.
5. Various incidental changes to make portsnap fit into the base
system's build mechanics.
X-MFC-After: 6.0-RELEASE
X-MFC-Before: 5.5-RELEASE
X-MFC-To: RELENG_6, RELENG_5, ports
discussed on: -arch and several other places
"yes please" from: simon, remko, flz, Diane Bruce
thinks this is a great idea: bsdimp
Hopes he didn't forget any files: cperciva
- Add a note about the organisation of the sections.
- Expand shell globs (they worked in a previous version of the delete-old
target, but not in this one).
- Use the correct way of checking for a native environment. [1]
- Add some more obsolete files.
- Fix some bad english. [1]
Suggested by: ru [1]
Approved by: mentor (joerg)
- removes obsolete files/dirs or libraries.
- works in interactive (default) and batch mode
- respects DISTDIR
- documented in UPDATING and build(7)
The head of the file ObsoleteFiles.inc contains instructions how to add
obsolete files/dirs/libs to the list. Obviously one should add obsolete
files to this list, when he removes a file/dir/lib from the basesystem.
Additionally add check-old target:
- allows re@ to check if a file on the obsolete list resurfaces
Design goals:
- allows full control by the user (default interactive mode)
- possibility of scripted removal of obsolete files (batch mode)
- opt-in removal of files (explicit list of files)
- seperate removal of libs (2 delete targets)
Important design decissions:
- structured list of files to remove instead of a plain text file:
* allows to remove additional files if a NO_foo knob is specified
without the need to change the targets (no NO_foo knob is respected
yet)
- not using mtree like NetBSD does:
* mtree doesn't has an interactive mode
Discussed on: arch (long ago), current (this year)
Additional input from: re (hrs)
Approved by: mentor (joerg)
and return a printable representation.
This fixes recognition of the PC Engines WRAP and improves the
recognition of the Soekris boards (Bios version can now be
seen in the dmesg output for instance).
Also, add watchdog support for PCM-582x platforms.
Submitted by: Adrian Steinmann <ast@marabu.ch>
Slightly changed by: phk
PR: 81360
o Add minimal kbdmux(4) man page to the source tree (more details to follow);
o Hook up kbdmux(4) to the build.
This concludes the first part of the kbdmux(4) keyboard multiplexer
integration. It now should be possible to use kbdmux(4), however one
must configure kbdmux(4) by hand (i.e. load kbdmux(4) module and use
kbdcontrol(1) to add/remove slave keyboards to/from kbdmux(4)).
MFC after: 1 week
we can only bridge interfaces with the same value it meant that all members had
to be set at ETHERMTU as well.
Allow the first member to be added to define the MTU for the bridge, the check
still applies to all additional members.
Print an informative message if the MTU is incorrect [1]
Requested by: Niki Denev [1]
Approved by: mlaier (mentor)
MFC after: 3 days
Fix XJack card description to reflect the actual model that we support
(I've never seen a CC-10BT and I've been looking).
List the specific chipsets supported.
Bump date.
Approved by: re (scottl, indirectly due to driver approval)
PPPoE modes. The interface was declared obsoleted before 5.3-RELEASE.
When running as access concentrator ng_pppoe(4) supports both modes
simultanously. When running as client mode can be swicthed in ppp(8)
configuration.
Approved by: re (scottl)
implementation. I took the NetBSD man page, and hacked it to, I hope,
to reflect the preliminary version of the bus space that Justin Gibbs
committed as part of the CAM integration in FreeBSD 3.0.
This isn't perfect, but it is better than we have now (which is, ahem,
nothing). Please coordinate changes to the file through me through
the 6.0 release.
Approved by: re (blanket for this one file)
phys_start and phys_end.
Remove a stale documentation not about dis/uncontiguous memory.
Update manual page date while I am around these ends.
Reviewed by: alc
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
Reviewed by: brueffer, ru
Approved by: brueffer
Thanks to: brueffer and ru for improving my not existing manpage-foo,
Arne Schwabe <arne@rfc2549.org> and
Kevin Oberman <oberman@es.net>
for details on thermal sensor location
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.
using the layer2, mac and mac-type keywords.
This is one of the last features that bridge.c has over if_bridge and gets us
very close to a full functional replacement.
Approved by: mlaier (mentor)
spanning tree support.
Based on Jason Wright's bridge driver from OpenBSD, and modified by Jason R.
Thorpe in NetBSD.
Reviewed by: mlaier, bms, green
Silence from: -net
Approved by: mlaier (mentor)
Obtained from: NetBSD
Group's documentation is `/usr/share/examples/mdoc/POSIX-copyright',
not the one I copied from `/usr/share/examples/etc/bsd-copyright'.
Suggested by: simon
2nd pointy hat of the day: yours truly
the Open Group manpage for pthread_atfork(), available online at:
http://www.opengroup.org/onlinepubs/009695399/functions/pthread_atfork.html
which should be ok, since Daniel Eischen had mailed me about Open
Group manpages and the fact that they have granted permission to
FreeBSD to use their material. Any differences from the OG text are
my changes to the original manpage text submitted by Alex Vasylenko:
- In an effort to clean up the part that describes hooks and their
calling order, I used a list instead of a single paragraph for all the three
types of fork() hooks.
- After a short discussion with Dima Dorfman a long long time ago in a
far away galaxy, I changed the RETURN VALUES section to look more
like the rest of the pthread_xxx.3 manpages.
PR: docs/68201
Submitted by: Alex Vasylenko <lxv@omut.org>
initially written by Roland, but hacked for a while by me. Any
good parts are the results of Roland's hard work. Any typos or
style mistakes are mine.
Submitted by: Roland Smith <rsmith@xs4all.nl>
PR: docs/63808, docs/75433, docs/80458, docs/80459
MFC after: 2 weeks
Have pmcstat(8) and pmccontrol(8) use these APIs.
Return PMC class-related constants (PMC widths and capabilities)
with the OP GETCPUINFO call leaving OP PMCINFO to return only the
dynamic information associated with a PMC (i.e., whether enabled,
owner pid, reload count etc.).
Allow pmc_read() (i.e., OPS PMCRW) on active self-attached PMCs to
get upto-date values from hardware since we can guarantee that the
hardware is running the correct PMC at the time of the call.
Bug fixes:
- (x86 class processors) Fix a bug that prevented an RDPMC
instruction from being recognized as permitted till after the
attached process had context switched out and back in again after
a pmc_start() call.
Tighten the rules for using RDPMC class instructions: a GETMSR
OP is now allowed only after an OP ATTACH has been done by the
PMC's owner to itself. OP GETMSR is not allowed for PMCs that
track descendants, for PMCs attached to processes other than
their owner processes.
- (P4/HTT processors only) Fix a bug that caused the MI and MD
layers to get out of sync. Add a new MD operation 'get_config()'
as part of this fix.
- Allow multiple system-mode PMCs at the same row-index but on
different CPUs to be allocated.
- Reject allocation of an administratively disabled PMC.
Misc. code cleanups and refactoring. Improve a few comments.
the v2 card is a TI. Since we're not attempting to keep this list
complete, removing this is best.
Reported by: Brian Candler <B dot Candler at pobox dot com>
Evan Dower <evantd at hotmail dot com>
MFC After: 1 day
settings and is an older version of the same design used for ICH SpeedStep.
It is only known to be available on PIIX4 chipsets.
Many thanks to Bruno Ducrot for writing the driver and Jon Noack for
testing.
Submitted by: Bruno Ducrot
than defaulting the cmode argument to vn_open() to 0. Supply a default
argument of ALQ_DEFAULT_CMODE (0600) in current callers.
Discussed with/pointed out by: hmp
Reveiwed by: jeff, hmp
MFC after: 3 days
- Add unp_addsockcred() (for LOCAL_CREDS).
- Add an argument to unp_connect2() to differentiate between
PRU_CONNECT and PRU_CONNECT2. (for LOCAL_CONNWAIT)
Obtained from: NetBSD (with some changes)
which document some of the sysctls available for configuring 4bsd, some
of the bullet features of ule, and that ule is considered experimental
still.
MFC after: 3 days
instructs the driver to avoid using Keyboard Interface Test command.
This command causes problems with some non-compliant hardware, resulting
in machine being abruptly powered down early in the boot process.
Particularly it's known that HP ZV5000 and Compaq R3000Z notebooks
are affected by this problem.
Due to popularity of those models this patch is good MFC5.4 candidate.
PR: 67745
Submitted by: Jung-uk Kim jkim at niksun.com
MFC after: 1 days
- Fix ifconfig commands. Replace 'mekmitasdigoat' with
'foobar'. While the former is more cool, the latter
makes example lines shorter.
Wording by: scottl
MFC after: 3 days
instances in a given devclass. This is useful for systems that want to
call code in driver static methods, similar to device_identify().
Reviewed by: dfr
MFC after: 2 weeks
- Update the description of the cdrom.1 target and add notes for cdrom.2
and cdrom.3.
- Document CD_PACKAGES_TREE (CD_EXTRA_BITS wasn't documented before).
- Document CVSARGS.
- Remove DISC[12]_{LABEL,NAME}.
- Remove NOPORTREADMES.
- Remove references to drivers.conf files and man page.
- Update version number for a CURRENT snapshot to 6.0.
variable, because it might be not obvious how to configure carp(4)
devices in rc.conf.
2. Remove the sentence about the not implemented "carpdev" option (this
was not imported from OpenBSD according to our source code) to avoid
confusion.
Reviewed by: glebius@
MFC after: 3 days
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.
Obtained from: http://www.gank.org/freebsd/cdce/
NetBSD
OpenBSD
alignment restrictive, and help performance on some ethernet cards which
currently copy the entire packet a couple bytes to get the packet aligned
properly...
Wordsmithing by: dwhite
Obtained from: NetBSD (code only)
I'll clean it up later: rwatson
is the highest acceptable value for the ending of the resource being
allocated. One could also believe that it is the highest starting
value of the resource. The code definitely expects the former, but I
could find no documentation of this apart from TFSC.
to mistakes from day 1, it has always had semantics inconsistent with
SVR4 and its successors. In particular, given argument M:
- On Solaris and FreeBSD/{alpha,sparc64}, it clobbers the old flags
and *sets* the new flag word to M. (NetBSD, too?)
- On FreeBSD/{amd64,i386}, it *clears* the flags that are specified in M
and leaves the remaining flags unchanged (modulo a small bug on amd64.)
- On FreeBSD/ia64, it is not implemented.
There is no way to fix fpsetsticky() to DTRT for both old FreeBSD apps
and apps ported from other operating systems, so the best approach
seems to be to kill the function and fix any apps that break. I
couldn't find any ports that use it, and any such ports would already
be broken on FreeBSD/ia64 and Linux anyway.
By the way, the routine has always been undocumented in FreeBSD,
except for an MLINK to a manpage that doesn't describe it. This
manpage has stated since 5.3-RELEASE that the functions it describes
are deprecated, so that must mean that functions that it is *supposed*
to describe but doesn't are even *more* deprecated. ;-)
Note that fpresetsticky() has been retained on FreeBSD/i386. As far
as I can tell, no other operating systems or ports of FreeBSD
implement it, so there's nothing for it to be inconsistent with.
PR: 75862
Suggested by: bde
