When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 2 weeks
This is a prerequisite to adding support for the monotonic clock
Reviewed by: ken, imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14030
Usage is ${name}_limits, and the argument is any flags accepted by
limits(1), such as `-n 100' (e.g. only allow 100 open files).
Approved by: cy
Differential Revision: https://reviews.freebsd.org/D14015
in the LinuxKPI. The old implementation assumed only one IDR layer was present.
Take additional IDR layers into account when computing the "id" value.
MFC after: 1 week
Found by: Karthik Palanichamy <karthikp@chelsio.com>
Tested by: Karthik Palanichamy <karthikp@chelsio.com>
Sponsored by: Mellanox Technologies
specified in the arg1 into ICMPv6 destination unreachable code according
to RFC7915.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Added CTLFLAG_VNET to net.link.lagg.lacp.default_strict_mode which was missed
in r290450.
Reported by: julian@
MFC after: 1 week
Sponsored by: Multiplay
Fix a bug when the system has no CPU 0. When created, threads were implicitly assigned to CPU 0.
This had no practical effect since a real CPU was chosen immediately by the scheduler. However,
on systems without a CPU 0, sched_ule attempted to access the scheduler queue of the "old" CPU
when assigned the initial choice of the old one. This caused an attempt to use illegal memory
and a crash (or, more usually, a deadlock). Fix this by assigned new threads to the BSP
explicitly and add some asserts to see that this problem does not recur.
Authored by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D13932
the first mbuf of the reassembled datagram should have a pkthdr.
This was discovered with cxgbe(4) + IPSEC + ping with payload more than
interface MTU. cxgbe can generate !M_WRITEABLE mbufs and this results
in m_unshare being called on the reassembled datagram, and it complains:
panic: m_unshare: m0 0xfffff80020f82600, m 0xfffff8005d054100 has M_PKTHDR
PR: 224922
Reviewed by: ae@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14009
pf_unlink_state() releases a reference to the state without checking if
this is the last reference. It can't be, because pf_state_insert()
initialises it to two. KASSERT() that this is always the case.
CID: 1347140
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The recursive ownership support added in r321584 was unconditionally in
effect all the time -- whenever a given i2c slave device instance tried to
lock the i2c bus for exclusive use when it already owned the bus, the call
returned immediately without waiting. However, many i2c slave drivers use
bus ownership to enforce that only a single thread at a time can be using
the slave device. The recursive locking changes broke this use case.
Now there is a new flag, IIC_RECURSIVE, which can be mixed in with the
other flags passed to iicbus_acquire_bus() to allow drivers to indicate
when recursive locking is desired. Using the flag implies that the driver
is managing concurrent access to the device by different threads in some way.
This immediately fixes all existing i2c slave drivers except for the two
i2c RTC drivers which use the recursive locking feature; those will be
fixed in a followup commit.
- Simplify the description of -H to assume 1:1 threading.
- Drop 'process' from description of 'lwp' field and the corresponding
XO field name.
- Do add an expansion of LWP in the description of 'lwp' and 'nlwps'.
- Add 'tid' as an alias for the 'lwp' field.
Reviewed by: imp, kib (older version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14021
r260553 added a number of mangled C++ symbols to Version.map inside of
an existing `extern "C++"` block.
ld.bfd 2.17.50 treats `extern "C++"` permissively and will match both
mangled and demangled symbols against the strings in the version map
block. ld.lld interprets `extern "C++"` strictly, and matches only
demangled symbols.
I believe lld's behaviour is correct. Contemporary versions of ld.bfd
also behave as lld does, so move the mangled symbols out of the
`extern "C++"` block.
PR: 225128, 185663
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
utilities is done by calling gr_addgid() for each group to be
added (usually found by traversing /etc/group) then calling the
setgroups() system call after the group set has been created.
The gr_addgid() function (helpfully?) deduplicates the addition
of group members. So, if you call it to add a group member that
already exists, it is just dropped. Because group[0] is the
effective group-ID and is over-written when a setgid program
is run, The value in group[0] is usually duplicated so that
group value is not lost when a setgid program is run.
Historically this happened because the group value indicated
in the password file also appears in /etc/group (e.g., if you
are group staff in the password file, you will also appear in
the staff line in /etc/group). But, with the addition of the
deduplication, the attempt to add group staff was lost because
it already appeared in group[0]. So, the fix is to deduplicate
starting from group[1] which allows a duplicate of the entry in
group[0], but not in later entries.
There is some confusion about the setgroups system call because in
BSD it has (always) set the entire group including the egid group
(in group[0]). However, in Linux, it skips over group[0] and starts
setting from group[1]. See this comment from linux_setgroups:
/*
* cr_groups[0] holds egid. Setting the whole set from
* the supplied set will cause egid to be changed too.
* Keep cr_groups[0] unchanged to prevent that.
*/
To make it clear what the BSD setgroups system call does, I
added the following paragraph to the setgroups(2) manual page:
The first entry of the group array (gidset[0]) is used as the effective
group-ID for the process. This entry is over-written when a setgid
program is run. To avoid losing access to the privileges of the
gidset[0] entry, it should be duplicated later in the group array.
By convention, this happens because the group value indicated in the
password file also appears in /etc/group. The group value in the
password file is placed in gidset[0] and that value then gets added a
second time when the /etc/group file is scanned to create the group set.
Reported by: Paul McMath paulm at tetrardus.net
Reviewed by: kib
MFC after: 2 weeks
These files previously had a 3-clause license and 'THE REGENTS' text.
Switch to standard 2-clause text with kib's approval, and add the SPDX
tag.
Approved by: kib
This behavior also matches a Linux-ism by allowing fdt_overlays to specify
names of overlays without an extension, e.g. fdt-overlays="sunxi-h3-h5-emac"
If we fail to load the file given by a name in fdt_overlays, try again with
".dtbo" appended to it. This still allows overlays to lack .dtbo extension
if user prefers it and just adds a fallback cushion.
Future work could move this from a hard-coded ".dtbo" to a loader.conf(5)
configuration option.
Reviewed by: gonzo
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13968
Right now, we'll leak memory when we display a help topic because we
don't free t, s, d that we've just used when breaking out of the loop.
NB: coverity just reported t, but s and d also leak.
CID: 1007776
Always free dev and fstyp before strduping new values to assign to
them. Free them at the end of the loop. This keeps them from leaking
for mal-formed /etc/fstab lines.
CID: 1007777, 1007778, 1007779
Sponsored by: Netflix
/boot/overlays was recently added without belonging to a package. It's only
used by bootloaders at the moment, so add it to the 'runtime' package to get
added with ubldr and friends.
Fix distrib-dirs METALOG generation while we're here. History elsewhere
seems to indicate that bapt@ fixed this to pull in all attributes from
mtrees while generating the METALOG. This fix got clobbered somewhere later,
so restore it.
Reviewed by: bapt, gjb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13996
