in the commit log of r321385 has been confirmed via the public VLI54
erratum. Thus, stop advertising DDR52 for these controllers.
Note that this change should hardly make a difference in practice as
eMMC chips from the same era as these SoCs most likely support HS200
at least, probably even up to HS400ES.
Once a pmc owner is added to the pmc_ss_owners list it is
visible for all to see. We don't want this to happen until
setup is complete.
Reported by: mjg
Approved by: sbruno
- fix load/unload race by allocating the per-domain list structure at boot
- fix long extant vm map LOR by replacing pmc_sx sx_slock with global_epoch
to protect the liveness of elements of the pmc_ss_owners list
Reported by: pho
Approved by: sbruno
It appears that domain information is set correctly independent
of whether or not NUMA is defined. However, there is no memory
backing secondary domains leading to allocation failure.
Reported by: pho@, np@
Approved by: sbruno@
On non-trivial SMP systems the contention on the pmc_owner mutex leads
to a substantial number of samples captured being from the pmc process
itself. This change a) makes buffers larger to avoid contention on the
global list b) makes the working sample buffer per cpu.
Run pmcstat in the background (default event rate of 64k):
pmcstat -S UNHALTED_CORE_CYCLES -O /dev/null sleep 600 &
Before:
make -j96 buildkernel -s >&/dev/null 3336.68s user 24684.10s system 7442% cpu 6:16.50 total
After:
make -j96 buildkernel -s >&/dev/null 2697.82s user 1347.35s system 6058% cpu 1:06.77 total
For more realistic overhead measurement set the sample rate for ~2khz
on a 2.1Ghz processor:
pmcstat -n 1050000 -S UNHALTED_CORE_CYCLES -O /dev/null sleep 6000 &
Collecting 10 samples of `make -j96 buildkernel` from each:
x before
+ after
real time:
N Min Max Median Avg Stddev
x 10 76.4 127.62 84.845 88.577 15.100031
+ 10 59.71 60.79 60.135 60.179 0.29957192
Difference at 95.0% confidence
-28.398 +/- 10.0344
-32.0602% +/- 7.69825%
(Student's t, pooled s = 10.6794)
system time:
N Min Max Median Avg Stddev
x 10 2277.96 6948.53 2949.47 3341.492 1385.2677
+ 10 1038.7 1081.06 1070.555 1064.017 15.85404
Difference at 95.0% confidence
-2277.47 +/- 920.425
-68.1574% +/- 8.77623%
(Student's t, pooled s = 979.596)
x no pmc
+ pmc running
real time:
HEAD:
N Min Max Median Avg Stddev
x 10 58.38 59.15 58.86 58.847 0.22504567
+ 10 76.4 127.62 84.845 88.577 15.100031
Difference at 95.0% confidence
29.73 +/- 10.0335
50.5208% +/- 17.0525%
(Student's t, pooled s = 10.6785)
patched:
N Min Max Median Avg Stddev
x 10 58.38 59.15 58.86 58.847 0.22504567
+ 10 59.71 60.79 60.135 60.179 0.29957192
Difference at 95.0% confidence
1.332 +/- 0.248939
2.2635% +/- 0.426506%
(Student's t, pooled s = 0.264942)
system time:
HEAD:
N Min Max Median Avg Stddev
x 10 1010.15 1073.31 1025.465 1031.524 18.135705
+ 10 2277.96 6948.53 2949.47 3341.492 1385.2677
Difference at 95.0% confidence
2309.97 +/- 920.443
223.937% +/- 89.3039%
(Student's t, pooled s = 979.616)
patched:
N Min Max Median Avg Stddev
x 10 1010.15 1073.31 1025.465 1031.524 18.135705
+ 10 1038.7 1081.06 1070.555 1064.017 15.85404
Difference at 95.0% confidence
32.493 +/- 16.0042
3.15% +/- 1.5794%
(Student's t, pooled s = 17.0331)
Reviewed by: jeff@
Approved by: sbruno@
Differential Revision: https://reviews.freebsd.org/D15155
This hardware isn't totally ancient, about equal to a mxge(4) or mlx4en(4),
but the company was sold to Exar which then promptly exited the Ethernet
business so the card was commercially available for under 2 years. On deep
search, the only usage of these cards I found was by the importing of the
driver. There are code quality issues identified by Brooks and Hiren and
no visible use nor maintainership that warrant removal from FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: gnn brooks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15363
sys/dev/ocs/ocs_os.c:
In ocs_thread_create(), use sizeof(*thread) (instead of
sizeof(thread)) as the size argument to memset so that we clear
out the entire thread structure instead of just a few bytes of it.
Submitted by: jtl
MFC after: 3 days
LAN7800 USB 3.1 to 10/100/1000 Ethernet with PHY
LAN7801 USB 3.1 to 10/100/1000 Ethernet with RGMII interface
Also update manufacturer name for the Vendor ID. Microchip acquired
SMSC in May 2012.
Sponsored by: The FreeBSD Foundation
Before this change, the VGA palette was configured to match the shell
palette (e.g. color #1 was red). There was one glitch early in boot when
the vt(4)'s VGA palette was loaded: the loader's logo would switch from
red to blue. Likewise for the "Booting..." message switching from blue
to red. That's because the loader's logo was drawed with the default VGA
palette where a few colors are swapped compared to the shell palette
(e.g. blue <-> red).
This change configures the default VGA palette during initialization and
converts input's colors from shell to VGA palette index.
There should be no visible changes, except the loader's logo which will
keep its original color.
Reviewed by: eadler
This makes it more logical:
1. It checks the requested color format
2. It fills the palette accordingly
Also vt_palette_init() is only called when needed (i.e. when the format
is `COLOR_FORMAT_RGB`).
Header length is optional hint for the ENA device. Because It is not
guaranteed that every packet header will be in the first mbuf
segment, it is better to skip passing any information. If the header
length will be indicating invalid value (different than 0), then the
packet will be dropped.
This kind situation can appear, when the UDP packet will be fragmented
by the stack in the ip_fragment() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reported by: Krishna Yenduri <kyenduri@brkt.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
On AWS, a network interface can get reinitialized every 30 minutes due
to the MTU being (re)set when a new DHCP lease is obtained. This can
cause packet drop, along with annoying syslog messages.
Skip setting the MTU in the ena driver if the new MTU is the same as the
old MTU. Note this fix is already in the netfront driver.
Testing: Verified ena up/down messages do not appear every 30 min in
/var/log/messages with the fix in place.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
This had been the default behavior but was changed accidentally as part
of the recent iw_cxgbe+OFED overhaul. Fix another bug in that change
while here: the global knob affects all the adapters in the system and
should be left alone by per-adapter code.
MFC after: 3 days
Sponsored by: Chelsio Communications
request, which can be used to configure hardware NAT and swapmac.
All firmwares released after Jan 2017 support this work request.
Sponsored by: Chelsio Communications
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month
r333345 added a panic to the default case statement on the incorrect
premise that it should "never happen" when in fact it is simply a
different adapter version.
Reported by: markj
Approved by: sbruno
These filters reside in the card's memory instead of its TCAM and can be
configured via a new "hashfilter" subcommand in cxgbetool. Hash and
normal TCAM filters can be used together. The hardware does an
exact-match of packet fields for hash filters, unlike the masked match
performed for TCAM filters. Any T5/T6 card with memory can support at
least half a million hash filters. The sample config file with the
driver configures 512K of these, it is possible to double this to 1
million+ in some cases.
The chip does an exact-match of fields of incoming datagrams with hash
filters and performs the action configured for the filter if it matches.
The fields to match are specified in a "filter mask" in the firmware
config file. The filter mask always includes the 5-tuple (sip, dip,
sport, dport, ipproto). It can, optionally, also include any subset of
the filter mode (see filterMode and filterMask in the firmware config
file).
For example:
filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
filterMask = protocol, port, vlan
Exact values of the 5-tuple, the physical port, and VLAN tag would have
to be provided while setting up a hash filter with the chip
configuration above.
Hash filters support all actions supported by TCAM filters. A packet
that hits a hash filter can be dropped, let through (with optional
steering to a specific queue or RSS region), switched out of another
port (with optional L2 rewrite of DMAC, SMAC, VLAN tag), or get NAT'ed.
(Support for some of these will show up in the driver in a follow-up
commit very shortly).
Sponsored by: Chelsio Communications
With r333218 it is now possible for drivers to use an sx lock and thus sleep while
waiting on long running operations rather than DELAY().
Reported by: gallatin
Reviewed by: sbruno
Approved by: sbruno
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14984
The properties 'assigned-clocks', 'assigned-clock-parents' and
'assigned-clock-rates' all work together.
'assigned-clocks' holds the list of clock for which we need to either
assign a new parent or a new frequency.
The old code just supported assigning a new parents, add support for
assigning a new frequency too.
These firmwares and the following list of changes are from the public
ChelsioUwire-3.7.1.0 release.
T6 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixed traffic stall when rate-limit is modified while running traffic.
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Exit Auto-Negotiation if we don't receive base page from peer within 10s.
This fixes some cases where in we keep on restarting auto negotiation without
ever exiting, resulting in link failure.
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Kernel and user mode NVMEoF performance enhancements.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
- FW_PARAMS_CMD processes all the valaid paramaters and returns value 0UL for
any unknown parameter.
OFLD:
- Fixes connection failure during SRQ reuse.
- Fixes incorrect cqe in case of WRITE with immediate operation.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed Rate limiting not working for 101Mbps<=rate limit<=163Mbps range.
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
ETH:
- Fixed link failure due to FEC mismatch with optics.
- Fixed link failure with link toggle stress tests.
- Only BaseR FEC is supported for 50G.
- Fixed a bug in next page handling which sometimes causes link down.
- Fixed port down due to failre to read eeprom contents of some modules.
- Fixed a bug causing adapter to fail with spider configuration.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR failure during simulteneous power up of VM.
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Enabled RS-FEC for 25G active copper cable and 25GBASE-SR.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connection cleanup in SO adpater.
- Fixed rdma connections during read invalidate.
- Fixed the crash when invalid BW rate is passed to fw.
- Fixed the traffic hang when BW allocation is changed from switch during traffic.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 248 VFs.
- Added fw driver periodic calibration for MC.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- Inline IPSec support added (flag F_FW_ULPTX_WR_DATA indicates the inline
IPSec WR).
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
T5 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Fixes an issue where fw hangs if max traffic rate passed is 0.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
ETH:
- Pad the Ethernet packets of size less than 64B with zeros. This fixes the
incorrect checksum generation of packets less then 64B.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Corrected lane inversion logic.
- Fixed improper LED behavior in T580 cards.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connections during read invalidate.
FOiSCSI:
- Fixed a connections hang when link is toggled frequently.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 124 VFs.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
optimize NVMEoF write.
T4 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- Added a new paramter iqtype to FW_IQ_CMD to identify the ingress NIC or
offload queues. This fixes an issue where driver was receiving interrupt with
no new messages in queue.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
MFC after: 3 days
Sponsored by: Chelsio Communications
Originally, I overlooked that PMIO register 0xc0 has a dual personality.
It can either be S5/Reset Status register or Misc. Fix register (aka
debug status register). The mode is controlled by bit 2 in PMIO
register 0xc4. Apparently there are register programming requirements
for the second personality, so many BIOSes leave the register, after
programming it, in that mode. So, we need to switch the register to the
correct mode.
Additionally, AMDSB8_WD_RST_STS was defined incorrectly as bit 13 while
it is actually bit 25 (and the register's width is 32 bits, not 16).
With this change I see the following in dmesg after a reset by the
watchdog:
amdsbwd0: ResetStatus = 0x42000000
amdsbwd0: Previous Reset was caused by Watchdog
MFC after: 2 weeks
GPUs often have a VGA PCI class code and are probed/attached
by the VGA driver. Allow them to be detached so they can
be presented as passthru devices to VM guests.
Submitted by: mmacy
Reviewed by: jhb, imp, rgrimes
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15269
Without the suspend method the watchdog may fire in S1 state. Without
the resume method the watchdog is not re-enabled after returning from S3
state. I observe this on one of my systems.
Not sure if watchdog(4) should participate in the suspend actions.
Right now everything is up to individual drivers.
MFC after: 2 weeks
According to the 802.1Q-2014 9.6 VLAN Tag Control Information, VID value 0
means that there is no VLAN tag assigned to the packet, and only PCP and
DEI values from the tag are meaningful. Current flow table programming
filter out such packets.
When programming VLAN filter for flow table, unconditionally add rule which
accept packets with VLAN id 0. The packets are already handled correctly
by the network stack.
Reviewed by: hselasky, slavash
Sponsored by: Mellanox Technologies
MFC after: 1 week
Admin pass-through requests took controller lock before the queue lock,
but in case of request submission to a failed controller controller lock
was taken after the queue lock. Fix that by reducing the lock scopes and
switching to mtx_pool locks to track pass-through request completion.
Sponsored by: iXsystems, Inc.
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the
ioctl number, because the generic ioctl handler in the OS takes care
of copying the data from user-space to kernel space, and then calls
the device specific ioctl handler. Thus using ioctl structs with
variable sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Sponsored by: Citrix Systems R&D
Refresh upstream driver before impending conversion to iflib.
Major changes:
- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings
PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
Filter work requests are submitted in the nexus cdev's ioctl which then
blocks waiting for a reply. If driver detach runs in this state and
disables interrupts the ioctl will never complete and detach will hang
in destroy_cdev.
Sponsored by: Chelsio Communications
Move the allwinner early printf support to the snps driver as it
should work with all implementation.
While here add instruction for enabling it on 64bits SoCs.
This is a prequisite before we remove the driver from -current.
Reviewed by: emaste kbowling imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15244
This change allows clean device detach on attach failures and driver unload,
while previous code tried to talk to already shut down controller, or even
accessed resources failed to allocate.
Sponsored by: iXsystems, Inc.
Reserve 3b in the 14b atid to identify the owner and use it to dispatch
the CPL. This allows all CPLs that use an atid to be used as shared
CPLs, although ACT_OPEN_RPL is the only one being converted in this
revision.
Sponsored by: Chelsio Communications
dma_tag_payload should not be destroyed before payload_dma_map, and seems
it should be used there instead of dma_tag to match creation.
Sponsored by: iXsystems, Inc.
intended recipient of a CPL when it can't be determined solely from the
opcode. Retire the per-queue handlers for such CPLs in favor of the new
scheme.
Sponsored by: Chelsio Communications
through a SYSCTL instead of a compile time define.
Add quirk by default for all LynxPoint XHCI controllers.
PR: 227602
MFC after: 3 days
Sponsored by: Mellanox Technologies
Per the datasheet, the BUSY bit must be set when reading or writing PHY
registers. From Linux commit 80928805babf.
Submitted by: Arshan Khanifar
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15217
In smsc_phy_init function, when the driver was trying to reset PHY, it
didn't poll for the correct bit (BMCR_RESET) to be cleared. Instead, it
anded it with MII_BMCR (which is 0), so it just exited the loop.
This issue was fixed in Linux in commit d94609200069.
Submitted by: Arshan Khanifar
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Previously, get_keyid() was returning the address of the receive key
instead of the transmit key when renegotiating the transmit key. This
could either hang the card (if a connection was only offloading TLS TX
and thus had a receive key address of -1) or cause the connection to
fail by overwriting the wrong key (if both RX and TX TLS were
offloaded).
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
- Microsemi SCSI driver for PQI controllers.
- Found on newer model HP servers.
- Restrict to AMD64 only as per developer request.
The driver provides support for the new generation of PQI controllers
from Microsemi. This driver is the first SCSI driver to implement the PQI
queuing model and it will replace the aacraid driver for Adaptec Series 9
controllers. HARDWARE Controllers supported by the driver include:
HPE Gen10 Smart Array Controller Family
OEM Controllers based on the Microsemi Chipset.
Submitted by: deepak.ukey@microsemi.com
Relnotes: yes
Sponsored by: Microsemi
Differential Revision: https://reviews.freebsd.org/D14514
added/deleted, the delete the multicast addresses previously programmed
in HW and reprogram the new set of multicast addresses.
Submitted by:Vaishali.Kulkarni@cavium.com
MFC after:5 days
device-side (and only device-side) "virtual USB serial adapters" - the
ones you can get with an OTG-capable board - as consoles. It boils down
to adding the device name to kern.console sysctl, although doing that
requires jumping through some hoops. It doesn't change the actual
operation of those virtual devices. The point is to make it possible
for init(8) to recognize them as console devices and to launch getty(8)
for them, when configured as "onifconsole" in ttys(5). The point of
that, in turn, is to add such entries to the default ttys(5), so that
init(8) will launch gettys for device-side "virtual serial adapters",
but not for actual USB serial dongles.
Reviewed by: hselasky@
No objections: imp@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
We intend to remove support before FreeBSD 12 is branched. These are
available only as 32-bit PCI devices. The driver has an ambiguous
license and I have not been successful in contacting the driver's author
in order to address this.
The planned deprecation has been announced on -current and -stable; if
we receive feedback that the driver is still useful and we are able to
resolve the license issue this deprecation notice can be reverted.
Reviewed by: bapt, brooks, imp, rgrimes
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15182
This sysctl allows a deeper dive into the sleep abyss comparing to
debug.acpi.suspend_bounce. When the new sysctl is set the system will
execute the suspend sequence up to the call to AcpiEnterSleepState().
That includes saving processor contexts and parking APs. Then, instead
of actually entering the sleep state, the BSP will call resumectx() to
emulate the wakeup. The APs should get restarted by the sequence of
Init and Startup IPIs that BSP sends to them.
MFC after: 8 days
Intel® Arria® 10 SoC.
Cadence Quad SPI Flash is not generic SPI controller, but SPI flash
controller, so don't use spibus here, instead provide quad spi flash
interface.
Since it is not on spibus, then mx25l flash device driver is not usable
here, so provide new n25q flash device driver with quad spi flash
interface.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10245
When disabling regulator when they are unused, check before is they are
enabled.
While here don't check the enable_cnt on the regulator entry as it is
checked by regnode_stop.
This solve the panic on any board using a fixed regulator that is driven
by a gpio when the regulator is unused.
Tested On: OrangePi One
Pointy Hat to: myself
Reported by: kevans, Milan Obuch (freebsd-arm@dino.sk)
Retrieve the tag from the correct ifnet and use the provided tag
(instead of hardcoded 0xffff, implying no tag) in the routines that
process offload policy.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
that cross this boundary, they perform better when this isn't the
case. Intel uses the 3rd byte in the vendor specific area for
this. The DC P3500 was previously listed without any explanation. Add
the DC P3520 and DC P4500 to the list.
There won't be any others drives needing this quirk. Intel has
standardized a field in the namespace data in 1.3 (noiob). A future
patch will use that if it exists, with fallback to this method.
Submitted by: Keith Busch
Reviewed by: jimharris@
ACPI I/O port descriptors use _MIN and _MAX fields to specify the set
of allowable base (start) addresses for an I/O port resource along with
a _LEN field specifying the length. A fixed resource is supposed to be
encoded with _MIN == _MAX, but some buggy firmwares instead set _MAX to
the end of the fixed range. Relocating I/O ranges only make sense in
_PRS (possible resource settings), not in _CRS (current resource settings),
so if an I/O port range with _MAX set set to the end of the range is
present in _CRS, treat it as a fixed I/O port resource starting at
_MIN.
PR: 224096
Submitted by: Harald Böhm <harald@boehm.codes>
Pointy hat to: jhb (taking so long to actually commit this)
MFC after: 1 week
When ixgbe was converted to iflib, it lost the SIOCGI2C support
that allows ifconfig to print SFP state, optical light levels, etc.
Restore this by plugging in to the ifdi_i2c_req iflib method. Note
that the sanity checking on dev_addr that used to be done in ixgbe is
now done in iflib.
Reviewed by: erj, Matthew Macy <mmacy@mattmacy.io>
Sponsored by: Netflix
Adjust sys/conf/files and sys/modules/puc/Makefile to omit
pucdata.c now tht it's included by puc_pci.c.
Submitted by: Lakhan Shiva Kamireddy (with build fixes by me)
Pull Request: https://github.com/freebsd/freebsd/pull/136
COP allows fine-grained control on whether to offload a TCP connection
using t4_tom, and what settings to apply to a connection selected for
offload. t4_tom must still be loaded and IFCAP_TOE must still be
enabled for full TCP offload to take place on an interface. The
difference is that IFCAP_TOE used to be the only knob and would enable
TOE for all new connections on the inteface, but now the driver will
also consult the COP, if any, before offloading to the hardware TOE.
A policy is a plain text file with any number of rules, one per line.
Each rule has a "match" part consisting of a socket-type (L = listen,
A = active open, P = passive open, D = don't care) and a pcap-filter(7)
expression, and a "settings" part that specifies whether to offload the
connection or not and the parameters to use if so. The general format
of a rule is: [socket-type] expr => settings
Example. See cxgbetool(8) for more information.
[L] ip && port http => offload
[L] port 443 => !offload
[L] port ssh => offload
[P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno
[P] dst port ssh => offload !nagle ecn cong tahoe
[P] dst port http => offload
[A] dst port 443 => offload tls
[A] dst net 192.168/16 => offload !timestamp cong highspeed
The driver processes the rules for each new listen, active open, or
passive open and stops at the first match. There is an implicit rule at
the end of every policy that prohibits offload when no rule in the
policy matches:
[D] all => !offload
This is a reworked and expanded version of a patch submitted by
Krishnamraju Eraparaju @ Chelsio.
Sponsored by: Chelsio Communications
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
