This builds the kernel-toolchain target and an amd64 GENERIC kernel on
Ubuntu 18.04, 20.04 and the latest macOS to ensure that new changes
don't regress building on non-FreeBSD hosts.
Reviewed By: emaste, lwhsu
Differential Revision: https://reviews.freebsd.org/D26512
The entire cache scan was a leftover from the old implementation.
It is incredibly wasteful in presence of several mount points and does not
win much even for single ones.
During devswitch probe, we pick boot pool based on boot disk, if the boot
disk happens to have multiple pools in freebsd-zfs partitions, the current
code does pick last pool from boot disk as boot pool. While there is no
way at that stage to test, the more logical approach would be to pick
first matching pool.
This patch is assuming we do pass pool guid pointer with guid value 0,
this will help us to determine, if the guid value is already set or not.
The general suggestion would be not to share disk between different pools.
Reported by: Alexander Leidinger
The purpose of checksize() is to verify that the referenced cluster
chain size matches the recorded file size (up to 2^32 - 1) in the
directory entry. We follow the cluster chain, then multiple the
cluster count by bytes per cluster to get the physical size, then
check it against the recorded size.
When a file is close to 4 GiB (between 4GiB - cluster size and 4GiB,
both non-inclusive), the product of cluster count and bytes per
cluster would be exactly 4 GiB. On 32-bit systems, because size_t
is 32-bit, this would wrap back to 0, which will cause the file be
truncated to 0.
Fix this by using 64-bit physicalSize instead.
This fix is inspired by an Android change request at
https://android-review.googlesource.com/c/platform/external/fsck_msdos/+/1428461
PR: 249533
Reviewed by: kevlo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26524
Similar to OPAL calls, switch to big endian to do calls to RTAS.
(Missed this one when I was doing the bulk commit of PowerPC64LE support.)
Sponsored by: Tag1 Consulting, Inc.
Document the new powerpc64le arch's initial specifications.
Certain things are subject to change while this is experimental. The most
likely change is that long double may switch to quad, dependent on POWER8
emulation assistance for __float128 being set up in the compiler (as
POWER8 does not have IEEE-compatible 128-bit hardware float, unlike POWER9.)
Sponsored by: Tag1 Consulting, Inc.
There are some tests available in the NetBSD test suite, but we don't
currently pass all of those; further investigation will go into that. For
now, just add a basic test as well as a test that copies from /dev/null to a
file.
The /dev/null test confirms that the file gets created if it's empty, then
that it truncates the file if it's non-empty. This matches some usage that
was previously employed in the build and was replaced in r366042 by a
simpler shell construct.
I will also plan on coming back to expand these in due time.
MFC after: 1 week
* powerpc time_t is 64 bit, not 32 bit.
* Add definition for powerpc64le.
With this, powerpc64le ntpd and ntpdate operate correctly instead of
corrupting the clock and exiting.
Tested on powerpc64, powerpc64le, and powerpc.
No feedback from cy@.
I am a bit confused as to how SIZEOF_TIME_T being wrong ever worked on
powerpc, it being big endian and all.
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26379
Due to enter_idle_powerx fabricating a MSR from scratch, it is necessary
for it to care about the endianness, so we don't accidentally switch
endian the first time we idle a thread.
Took about five seconds to spot after seeing an unmangled backtrace.
The hard bit was needing to temporarily set up a mutex to sort out the
logjam that happens when every thread simultaneously wakes up in the wrong
endian due to the panic IPI and panics, leaving what I can best describe as
"alphabet soup" on the console.
Luckily, I already had a patch sitting around to do that.
This brings POWER8 up to equivilence with POWER9 on PPC64LE.
Sponsored by: Tag1 Consulting, Inc.
Due to the sqlite3 endian detection code preferring to check platform defines
instead of checking endian defines, it is necessary to manually set
the endianness on PowerPC64LE.
Unlike other bi-endian platforms, PowerPC64LE relies entirely on the
generic endianness macros like __BYTE_ORDER__ and has no platform-specific
define to denote little endian.
Add -DSQLITE_BYTEORDER=1234 to the CFLAGS when building libsqlite3 on
powerpc64le.
Fixes runtime operation of sqlite on PowerPC64LE.
Sponsored by: Tag1 Consulting, Inc.
gdtoa wins the award for "most outdated endianness naming convention"
with its IEEE_8087 vs IEEE_MC68k defines. I had a good chuckle.
Update softfloat and arith.h to adjust to BE or LE automatically
based on the low level preprocessor defines.
Fixes printf/scanf on PowerPC64LE, although there is still a problem
lurking regarding Signalling NaNs...
Sponsored by: Tag1 Consulting, Inc.
OPAL unconditionally enters secondary CPUs with only HV and SF set.
I tried writing a secondary entry point instead, but OPAL rejected it
and I am unsure why, so I resorted to making the system reset interrupt
endian-flexible.
This means we take a slight performance hit on wakeup on LE, but it is
a good stopgap until we can figure out a reliable way to make OPAL enter
where we want it to.
It probably makes sense to have it around anyway, because I can imagine
scenarios where the cpu resets itself to BE and does a software reset.
Sponsored by: Tag1 Consulting, Inc.
More endian conversion.
* Install TCEs correctly (i.e. in big endian)
* Convert to big endian and back when setting up queue pages and IRQs.
Sponsored by: Tag1 Consulting, Inc.
Since OPAL runs in big endian, any data being passed back and forth
via memory instead of registers needs to be byteswapped.
From my notes during development:
"A good way to find candidates is to look for vtophys() in opal_call()
parameters. The memory being passed will be written into in BE."
Sponsored by: Tag1 Consulting, Inc.
It's much easier to implement this in an endian-independent way when we
don't also have to worry about masking half of the dword off.
Given that this code ran on a machine that ran a poudriere bulk with no
kernel oddities, I am relatively certain it is correctly implemented. ;)
This should be a minor performance boost on BE as well.
Sponsored by: Tag1 Consulting, Inc.
For a body of code that had its endian conversion bits written blind without
the ability to test, moea64 was VERY close to being correct.
There were only four instances where the existing code was getting it wrong.
Sponsored by: Tag1 Consulting, Inc.
This was originally part of the initial commit, but after discussion in
D26399, I split it out into its own commit after the kernel config file.
Sponsored by: Tag1 Consulting, Inc.
This is slightly stripped down from GENERIC64, as PowerMac G5 machines
are incapable of running in LE mode (so we can skip the Mac drivers.)
While technically POWER6 and POWER7 have the hardware capability of running
in LE mode, they have a tendency to trap excessively when a load/store is
misaligned. (an extremely common occurrence in LE code, and one of the main
reasons I consider BE to be superior, as it turns potential security issues
into immediately obvious mangled numbers.)
Additionally, there was no mechanism to control what endian interrupts
are delivered in, so supporting LE operation on POWER6 and POWER7 involves
some really dirty tricks in the interrupt vectors that I would rather
avoid.
IBM drew the line in the sand at POWER8 some time around 2013, embracing
full support for LE in the platform, and making a push across the board
for LE code to target POWER8 as a minimum requirement. As such, usage of
LE kernels on POWER6 and POWER7 is practically nil, despite it being
technically possible to do.
The so-called "TRUELE" feature bit which is the baseline requirement for
needed for PowerPC64LE was introduced in POWER8.
Sponsored by: Tag1 Consulting, Inc.
There was a small window cp was broken. Work around this by using :>
instead of cp /dev/null. Ideally, we'd keep the cp /dev/null in the
build as a regression test, but doing so breaks people that upgraded
during the cp breakage and this is simpler than bootstrapping a
working cp since there's no good __FreeBSD_version sign posts for
that.
Suggested by: lots of people
Too stubborn for his own good: imp
When running without a hypervisor, we need to set the ILE bit in the LPCR
ourselves.
For the boot processor, handle it in powernv_attach() like we do for other
LPCR bits.
No change for the APs, as they will use the lpcr global to set up their own
LPCR when they do their own cpudep_ap_early_bootstrap() and pick up this
automatically.
Sponsored by: Tag1 Consulting, Inc.
OPAL runs in big endian, so we need to rfid into it to switch endian
atomically when branching to it, and we need to do the
RETURN_TO_NATIVE_ENDIAN dance when it returns to us.
Sponsored by: Tag1 Consulting, Inc.
Given that we have converted to ELFv2 for BE already, endianness is the only
difference between the two ARCHs.
As such, there is no need to differentiate LIBC_ARCH between the two.
Combining them like this lets us avoid needing to have two copies of several
bits for no good reason.
Sponsored by: Tag1 Consulting, Inc.
Unlike virtio, which in legacy mode is guest endian, the hypervisor vscsi
interface operates in big endian, so we must convert back and forth in several
places.
These changes are enough to attach a rootdisk.
Sponsored by: Tag1 Consulting, Inc.
The TCG implementation of mtmsrd in qemu blindly copies the entire register
to the MSR, instead of the specific bit positions listed in the ISA.
This means that qemu will prematurely switch endian out from under the
running code instead of waiting for the rfid, causing an immediate trap
as it attempts to interpret the next instruction in the wrong endianness.
To work around this, ensure PSL_LE is still set before doing the mtmsrd.
In the future, we may wish to just turn off translation and unconditionally
use rfid to switch to the ofmsr instead of quasi-switching to the ofmsr.
Add a new platform option so this can be disabled. (And so that we can
conditonalize additional QEMU-specific hacks in the platform code.)
Sponsored by: Tag1 Consulting, Inc.
Since we will need to be able to take traps relatively early in the process,
ensure that the hypervisor changes our ILE for us as soon as we are ready.
Sponsored by: Tag1 Consulting, Inc.
Since OFW always runs in big endian in practice, we need to convert several
bits back and forth.
This is necessary to communicate with SLOF on LE pseries.
Sponsored by: Tag1 Consulting, Inc.
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
I had overthought how to do the FICL_TRUE change. We do not need to
explicitly specify how big the 0 is before the cast to the correct size.
The same change was suggested by both imp@ and Gunther Nikl independently.
Tested on powerpc.
Reported by: imp, Gunther Nikl
Document the calls to send messages to userland via devctl.
devctl_notify will create a message for the specified system,
subsystem and type, optionally adding additional information.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
Belatedly document the quoting requirements for the devctl protocol. I
thought they'd been previously documented.
Also, while I'm here, make igor happy.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
This routine centralizes the knowledge needed for properly quoting
'value' in all key="value" items that appear in devctl messages.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
It is like O_BENEATH, but disables to walk out of the subtree rooted
in the starting directory. O_BENEATH does not care if path walks out
if it returned.
Requested by: Dan Gohman <dev@sunfishcode.online>
PR: 248335
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25886
Do not care if path walks out of the topping directory if it returns back.
Requested and reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25886
not unconditionally on any dotdot component.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25886
the helper to calculate namei flags both for open(2) and creat(2).
Suggested and reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25886
