stand/i386 boot:
Revert upstream lld r371957 (git commit 06bb7dfbd) by Fangrui Song:
[ELF] Map the ELF header at imageBase
If there is no readonly section, we map:
* The ELF header at imageBase+maxPageSize
* Program headers at imageBase+maxPageSize+sizeof(Ehdr)
* The first section .text at imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)
Due to the interaction between Writer<ELFT>::fixSectionAlignments and
LinkerScript::allocateHeaders,
`alignDown(p_vaddr(R PT_LOAD)) = alignDown(p_vaddr(RX PT_LOAD))`.
The RX PT_LOAD will override the R PT_LOAD at runtime, which is not ideal:
```
// PHDR at 0x401034, should be 0x400034
PHDR 0x000034 0x00401034 0x00401034 0x000a0 0x000a0 R 0x4
// R PT_LOAD contains just Ehdr and program headers.
// At 0x401000, should be 0x400000
LOAD 0x000000 0x00401000 0x00401000 0x000d4 0x000d4 R 0x1000
LOAD 0x0000d4 0x004010d4 0x004010d4 0x00001 0x00001 R E 0x1000
```
* createPhdrs allocates the headers to the R PT_LOAD.
* fixSectionAlignments assigns `imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)` (formula: `alignTo(dot, maxPageSize) + dot % config->maxPageSize`) to addrExpr of .text
* allocateHeaders computes the minimum address among SHF_ALLOC sections, i.e. addr(.text)
* allocateHeaders sets address of ELF header to `addr(.text)-sizeof(Ehdr)-sizeof(program headers) = imageBase+maxPageSize`
The main observation is that when the SECTIONS command is not used, we
don't have to call allocateHeaders. This requires an assumption that
the presence of PT_PHDR and addresses of headers can be decided
regardless of address information.
This may seem natural because dot is not manipulated by a linker script.
The other thing is that we have to drop the special rule for -T<section>
in `getInitialDot`. If -Ttext is smaller than the image base, the headers
will not be allocated with the old behavior (allocateHeaders is called)
but always allocated with the new behavior.
The behavior change is not a problem. Whether and where headers are
allocated can vary among linkers, or ld.bfd across different versions
(--enable-separate-code or not). It is thus advised to use a linker
script with the PHDRS command to have a consistent behavior across
linkers. If PT_PHDR is needed, an explicit --image-base can be a simpler
alternative.
Differential Revision: https://reviews.llvm.org/D67325
llvm-svn: 371957
Previously corrupt note namesz or descsz (perhaps caused by readelf's
current lack of endian support for notes) resulted in a crash. Check
that namesz and descsz do not extend beyond the end of the buffer before
trying to access name and desc data.
Reported by: jhb
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This will be used to tag binaries that require W+X mappings, in advance
of the ability to prevent W^X in mmap/mprotect.
There is still some discussion about the flag's name, but the ABI won't
change even if the name does (as kib pointed out in the review).
Reviewed by: csjp, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23909
From r349609 (PROTMAX_DISABLE) and r354790 (STKGAP_DISABLE). Commited
upstream (in a slightly different form) as r3831.
Sponsored by: The FreeBSD Foundation
Now that we no longer have GCC 4.2.1 in the tree and can assume FreeBSD
is being built with a C++11 compiler available, we can use BSDL dtc
unconditionally and retire the GPL dtc.
GPL dtc now has FreeBSD CI support via Cirrus-CI to help ensure it
continues to build/work on FreeBSD and is available in the ports tree
if needed.
The copy of (copyfree licensed) libfdt that we actually use is in
sys/contrib/libfdt so the extra copy under contrib/dtc/libfdt can be
removed along with the rest of the GPL dtc.
Reviewed by: kevans, ian, imp, manu, theraven
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23192
LLVM's libunwind is used on all FreeBSD-supported CPU architectures and
is a required component.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23123
It is specifically mentioned in the manual page. Note it has no functional
change in reality because DH_set0_pqg() cannot fail when both p and g are
not NULL.
[RISCV] Lower llvm.trap and llvm.debugtrap
Summary:
Until this commit, these have lowered to a call to abort().
`llvm.trap()` now lowers to `unimp`, which should trap on all systems.
`llvm.debugtrap()` now lowers to `ebreak`, which is exactly what this
instruction is for.
Reviewers: asb, luismarques
Reviewed By: asb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69390
This fixes miscompilation resulting in linking failures with
INVARIANTS disabled.
Reviewed by: dim
Differential Revision: https://reviews.freebsd.org/D23857
ftp(1) from vendor/tnftp always tried the following for
every TCP connection:
1. Get the current buffer length of SO_SNDBUF and SO_RCVBUF
by getsockopt(2).
2. Invoke setsockopt(2) to set them to the same values
after checking if they are in a range between 8 KiB to 8 MiB.
This behavior broke dynamic buffer sizing enabled by
default (net.inet.tcp.{recv,send}buf_auto sysctls) and
led to a very poor transfer rate. The fetch(1) utility
does not have this problem.
This change prevents SO_SNDBUF and SO_RCVBUF from configuring
when the buffer auto-sizing is enabled unless the buffer sizes are
explicitly specified.
PR: 240827
Spotted by: Yuichiro NAITO
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23732
OpenSSL 1.1 API patch for sendmail had a bug which
prevented sm_RSA_generate_key() function from working.
This function is used to generate a temporary RSA key
for a shared memory region used for TLS processing.
Note that 12.0 and 12.1-RELEASE include this bug.
This affects only if SM_CONF_SHM compile-time
option (enabled by default) and SharedMemoryKey
run-time option (not enabled by default) in a .cf file are
specified. The latter corresponds to confSHARED_MEMORY_KEY in
a .mc file.
PR: 242861
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23734
[MC][ARM] Resolve some pcrel fixups at assembly time (PR44929)
MC currently does not emit these relocation types, and lld does not
handle them. Add FKF_Constant as a work-around of some ARM code after
D72197. Eventually we probably should implement these relocation
types.
By Fangrui Song!
Differential revision: https://reviews.llvm.org/D72892
This re-enables using the arm 'adr' pseudo instruction on global symbols
again. It was broken as a side-effect of upstream commit 2bfee35cb,
which lead to "error: unsupported relocation on symbol" when assembling
such constructs, which are used in e.g. sys/arm/arm/locore-v[46].S.
PR: 244251
files. This allows for loading, during the same invocation of ippool, of
multiple sources of input using multiple tools to concurrently maintain the
files such as fail2ban, macro preprocessors, and manually.
MFC after: 1 week
Among the changes from before:
- Add support for extended colors on widechar version
- Enable ncurses extended functions
- Enable version 2 of the extended mouse support
- Enable SCREEN extensions
Modification that differs from upstream:
- _nc_delink_entries used to be exposed and was turn static,
turn it back as dynamic to not break abi
- Adapt our old termcap.c to modern ncurses
MFC after: 3 weeks
Restore functionality of --sysroot on FreeBSD after b18cb9c47
After b18cb9c47, clang would sometimes prefer the host C++ includes
(e.g. in /usr/include/c++/v1) before those specified via --sysroot.
While this behavior may be desirable on Linux, it is not so on
FreeBSD, where we make extensive use of --sysroot during the build of
the base system. In that case, clang must *not* search outside the
sysroot, except for its own internal headers.
Add an override addLibCxxIncludePaths() to restore the old behavior,
which is to simply append /usr/include/c++/v1 to the specified
sysroot. While here, apply clang-format to the FreeBSD specific
toolchain files.
Fixes PR44923.
Fix a -Wbitwise-conditional-parentheses warning in
_LIBUNWIND_ARM_EHABI libunwind builds
```
src/UnwindCursor.hpp:1344:51: error: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Werror,-Wbitwise-conditional-parentheses]
_info.flags = isSingleWordEHT ? 1 : 0 | scope32 ? 0x2 : 0; // Use enum?
~~~~~~~~~~~ ^
src/UnwindCursor.hpp:1344:51: note: place parentheses around the '|' expression to silence this warning
_info.flags = isSingleWordEHT ? 1 : 0 | scope32 ? 0x2 : 0; // Use enum?
^
( )
src/UnwindCursor.hpp:1344:51: note: place parentheses around the '?:' expression to evaluate it first
_info.flags = isSingleWordEHT ? 1 : 0 | scope32 ? 0x2 : 0; // Use enum?
^
( )
```
But `0 |` is a no-op for either of those two interpretations, so I
think what was meant here was
```
_info.flags = (isSingleWordEHT ? 1 : 0) | (scope32 ? 0x2 : 0); // Use enum?
```
Previously, if `isSingleWordEHT` was set, bit 2 would never be set.
Now it is. From what I can tell, the only thing that checks these
bitmask is ProcessDescriptors in Unwind-EHABI.cpp, and that only
cares about bit 1, so in practice this shouldn't have much of an
effect.
Differential Revision: https://reviews.llvm.org/D73890
This fixes the above errors when building libunwind for arm variants.
The hack in question is intended to workaround seemingly bogus #line markers
in cpp output. As far as I can tell, llvm cpp doesn't do this by default, so
there's no reason to add -P.
In our /bin/sh, the main incantation should be placed in a sub-shell in
order to properly pipe the output to fgrep.
The main motivation for this change is admittedly to stop emitting the noise
about clang not being gcc in make -s buildworld
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22952
Presumably a bool definition is obtained via header contamination on
FreeBSD-CURRENT. Found while trying to upstream FreeBSD addr2line
changes - the FreeBSD 11.2 CI build failed there.
Reported by: Cirrus-CI, upstream ELF Tool Chain
MFC with: r357844
Sponsored by: The FreeBSD Foundation
Update libarchive to 3.4.2
Relevant vendor changes:
PR #1289: atomic extraction support (bsdtar -x --safe-writes)
PR #1308: big endian fix for UTF16 support in LHA reader
PR #1326: reject RAR5 files that declare invalid header flags
Issue #987: fix support 7z archive entries with Delta filter
Issue #1317: fix compression output buffer handling in XAR writer
Issue #1319: fix uname or gname longer than 32 characters in pax writer
Issue #1325: fix use after free when archiving hardlinks in ISO9660 or XAR
Use localtime_r() and gmtime_r() instead of localtime() and gmtime()
X-MFC-With: r356212,r356365,r356416
MFC after: 1 week
Libarchive 3.4.2
Relevant vendor changes:
PR #1289: atomic extraction support (bsdtar -x --safe-writes)
PR #1308: big endian fix for UTF16 support in LHA reader
PR #1326: reject RAR5 files that declare invalid header flags
Issue #987: fix support 7z archive entries with Delta filter
Issue #1317: fix compression output buffer handling in XAR writer
Issue #1319: fix uname or gname longer than 32 characters in pax writer
Issue #1325: fix use after free when archiving hardlinks in ISO9660 or XAR
Use localtime_r() and gmtime_r() instead of localtime() and gmtime()
The version that ended upstream was ultimately slightly different than the
version committed here; notably, statvfs() is used but it's redefined
appropriately to statfs() on FreeBSD since we don't provide the fstypename
for the former interface.
The revokex test does not work when the scratch directory is created on NFS.
Given the nature of NFS, it likely can never work without looking like a
security hole since O_SEARCH would rely on the server knowing that the
directory did have +x at the time of open and that it's OK for it to have
been revoked based on POSIX specification for O_SEARCH.
This does mean that O_SEARCH is only partially functional on NFS in general,
but I suspect the execute bit getting revoked in the process is likely not
common.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23573
The RCSID data was wrong, so this is effectively a record-only merge
with correction of said data. No further changes should be needed in this
area, as we've now upstreamed our local changes to this specific test.
In FreeBSD's O_SEARCH implementation, O_SEARCH in conjunction with O_RDWR or
O_WRONLY is explicitly rejected. In this case, O_RDWR was not necessary
anyways as the file will get created with or without it.
This was submitted upstream as misc/54940 and committed in rev 1.8 of the
file.
Coverity correctly reports this as a resource leak. It's an admittedly minor
one, but plug it anyways.
This has been submitted upstream as misc/54939.
CID: 978288
The caller of dump_object() is responsible for opening the file, let it
be responsible for closing too.
CID: 1411588
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The callers only check whether the returned pointer is non-NULL, so this
was harmless in practice, but change the return value to guard against
the issue.
CID: 1411597
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
We should really create the output file in the same directory as the
destination file so that rename() works. This will be done in a future
change as part of some work to run in capability mode.
CID: 1262523
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The code clearly meant to resize the buffer in the case where a section
was backed by multiple data descriptors.
In practice this shouldn't have been a problem since libelf would return
a single data descriptor for each section in a newly opened file.
CID: 1262522
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
All callers pass a non-NULL pointer, and otherwise it was possible to
leak memory if the abbrev was not added to a CU.
CID: 1193365
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
All callers of _dwarf_add_expr() and _dwarf_expr_into_block() pass a
non-NULL expr pointer, and these functions assume that expr is non-NULL
anyway.
CID: 1193305, 1193306
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
sqlite3-3.30.1 (3300100), as it causes svnlite segfaults on PowerPC,
resulting in corruption.
Reported by: Mark Millard <marklmi at yahoo.com>
Francis Little <oggy at farscape.co.uk>
Previously, addr2line would sequentially search all CUs for each input
address. For some uses, notably syzkaller's code coverage map generator,
this was extremely slow. Add a CU cache into which entries are added
following a successful lookup, and search the cache before falling back
to a scan. When translating a large number of addresses this yields
slightly better performance than GNU addr2line.
Garbage-collect an unused hash table which appears to have been intended
for the same purpose. A hash table doesn't seem particularly suitable
since each CU spans a range of addresses.
Submitted by: Tiger Gao <tig@freebsdfoundation.org>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23418
O_SEARCH is defined by POSIX [0] to open a directory for searching, skipping
permissions checks on the directory itself after the initial open(). This is
close to the semantics we've historically applied for O_EXEC on a directory,
which is UB according to POSIX. Conveniently, O_SEARCH on a file is also
explicitly undefined behavior according to POSIX, so O_EXEC would be a fine
choice. The spec goes on to state that O_SEARCH and O_EXEC need not be
distinct values, but they're not defined to be the same value.
This was pointed out as an incompatibility with other systems that had made
its way into libarchive, which had assumed that O_EXEC was an alias for
O_SEARCH.
This defines compatibility O_SEARCH/FSEARCH (equivalent to O_EXEC and FEXEC
respectively) and expands our UB for O_EXEC on a directory. O_EXEC on a
directory is checked in vn_open_vnode already, so for completeness we add a
NOEXECCHECK when O_SEARCH has been specified on the top-level fd and do not
re-check that when descending in namei.
[0] https://pubs.opengroup.org/onlinepubs/9699919799/
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23247
This construction used some relatively slow design involving SHA2; even if
it were fed real entropy (unclear; external to the design), it did not
handle fork in a safe way, and it was difficult to audit for correctness.
So just rip it out and use the very simple and known-correct arc4random(3)
interface in its place.
In apr_vformatter, the variable buf was declared inside a limited scope
region, but a pointer to it is leaked outside of that region and used
later. This is undefined behavior. Fix by moving the buf variable to
function scope.
Reported by: Coverity
CID: 1192541
[ELF] Map the ELF header at imageBase
If there is no readonly section, we map:
* The ELF header at imageBase+maxPageSize
* Program headers at imageBase+maxPageSize+sizeof(Ehdr)
* The first section .text at imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)
Due to the interaction between Writer<ELFT>::fixSectionAlignments and
LinkerScript::allocateHeaders,
`alignDown(p_vaddr(R PT_LOAD)) = alignDown(p_vaddr(RX PT_LOAD))`.
The RX PT_LOAD will override the R PT_LOAD at runtime, which is not ideal:
```
// PHDR at 0x401034, should be 0x400034
PHDR 0x000034 0x00401034 0x00401034 0x000a0 0x000a0 R 0x4
// R PT_LOAD contains just Ehdr and program headers.
// At 0x401000, should be 0x400000
LOAD 0x000000 0x00401000 0x00401000 0x000d4 0x000d4 R 0x1000
LOAD 0x0000d4 0x004010d4 0x004010d4 0x00001 0x00001 R E 0x1000
```
* createPhdrs allocates the headers to the R PT_LOAD.
* fixSectionAlignments assigns `imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)` (formula: `alignTo(dot, maxPageSize) + dot % config->maxPageSize`) to addrExpr of .text
* allocateHeaders computes the minimum address among SHF_ALLOC sections, i.e. addr(.text)
* allocateHeaders sets address of ELF header to `addr(.text)-sizeof(Ehdr)-sizeof(program headers) = imageBase+maxPageSize`
The main observation is that when the SECTIONS command is not used, we
don't have to call allocateHeaders. This requires an assumption that
the presence of PT_PHDR and addresses of headers can be decided
regardless of address information.
This may seem natural because dot is not manipulated by a linker script.
The other thing is that we have to drop the special rule for -T<section>
in `getInitialDot`. If -Ttext is smaller than the image base, the headers
will not be allocated with the old behavior (allocateHeaders is called)
but always allocated with the new behavior.
The behavior change is not a problem. Whether and where headers are
allocated can vary among linkers, or ld.bfd across different versions
(--enable-separate-code or not). It is thus advised to use a linker
script with the PHDRS command to have a consistent behavior across
linkers. If PT_PHDR is needed, an explicit --image-base can be a simpler
alternative.
Differential Revision: https://reviews.llvm.org/D67325
llvm-svn: 371957
This causes "ld: error: output file too large: 18446744073707016908
bytes" when linking our loader_4th and loader_lua. Clearly, something
is wrong when using -Ttext 0x0: I will file an upstream bug report for
this.
Fix the following -Werror warning from clang 10.0.0 in binutils:
contrib/binutils/bfd/peicode.h:1356:3: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
if (efi)
^
contrib/binutils/bfd/peicode.h:1353:8: note: previous statement is here
if (pe_arch (bfd_target_efi_arch (*target_ptr)) != arch)
^
contrib/binutils/bfd/peicode.h:1370:3: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
if (!efi)
^
contrib/binutils/bfd/peicode.h:1367:8: note: previous statement is here
if (pe_arch (bfd_target_pei_arch (*target_ptr)) != arch)
^
MFC after: 3 days
contrib/binutils/bfd/peicode.h:1356:3: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
if (efi)
^
contrib/binutils/bfd/peicode.h:1353:8: note: previous statement is here
if (pe_arch (bfd_target_efi_arch (*target_ptr)) != arch)
^
contrib/binutils/bfd/peicode.h:1370:3: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
if (!efi)
^
contrib/binutils/bfd/peicode.h:1367:8: note: previous statement is here
if (pe_arch (bfd_target_pei_arch (*target_ptr)) != arch)
^
MFC after: 3 days
The current code clearly intended for these to be octal based on the values
used, but the octal prefix was forgotten. Add it now for correctness, but
note that we don't currently execute these tests.
This has been submitted upstream as misc/54902, so I've omitted the standard
FreeBSD markers that we tend to put into netbsd-tests for upstream-candidate
identification.
Reviewed by: ngie
MFC after: 3 days
- Two changes to encoder options:
encoder options may use plus or colon, but only one
encoder names can be specified as "@name"
This results in the syntax:
df --libxo @csv:no-header:leafs=name.available-blocks /
- If xo_set_program is called before xo_parse_args, honor the requested value
- add xo_errorn* function; repair newline-adding-on-xo_error bug
- test programs now use fixed name, since linux libtool prefixs "lt-"
- Fix "horse butt" comment in source code
- update test cases
PR: 242686
Add 8548 CPU definition and attributes
8548 CPU is GCC's name for the e500v2, so accept this in clang. The
e500v2 doesn't support lwsync, so define __NO_LWSYNC__ for this as
well, as GCC does.
Differential Revision: https://reviews.llvm.org/D67787
Merge commit ff0311c4b from llvm git (by Justin Hibbits):
[PowerPC]: Add powerpcspe target triple subarch component
Summary:
This allows the use of '-target powerpcspe-unknown-linux-gnu' or
'powerpcspe-unknown-freebsd' to be used, instead of '-target
powerpc-unknown-linux-gnu -mspe'.
Reviewed By: dim
Differential Revision: https://reviews.llvm.org/D72014
Merge commit ba91dffaf from llvm git (by Fangrui Song):
[Driver][PowerPC] Move powerpcspe logic from cc1 to Driver
Follow-up of D72014. It is more appropriate to use a target feature
instead of a SubTypeArch to express the difference.
Reviewed By: #powerpc, jhibbits
Differential Revision: https://reviews.llvm.org/D72433
commit 36eedfcb3 from llvm git (by Justin Hibbits):
[PowerPC] Fix powerpcspe subtarget enablement in llvm backend
Summary:
As currently written, -target powerpcspe will enable SPE regardless
of disabling the feature later on in the command line. Instead,
change this to just set a default CPU to 'e500' instead of a generic
CPU.
As part of this, add FeatureSPE to the e500 definition.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D72673
These are needed to unbreak the build for powerpcspe.
Requested by: jhibbits
MFC after: 1 week
[MIPS][ELF] Use PC-relative relocations in .eh_frame when possible
When compiling position-independent executables, we now use
DW_EH_PE_pcrel | DW_EH_PE_sdata4. However, the MIPS ABI does not define a
64-bit PC-relative ELF relocation so we cannot use sdata8 for the large
code model case. When using the large code model, we fall back to the
previous behaviour of generating absolute relocations.
With this change clang-generated .o files can be linked by LLD without
having to pass -Wl,-z,notext (which creates text relocations).
This is simpler than the approach used by ld.bfd, which rewrites the
.eh_frame section to convert absolute relocations into relative references.
I saw in D13104 that apparently ld.bfd did not accept pc-relative relocations
for MIPS ouput at some point. However, I also checked that recent ld.bfd
can process the clang-generated .o files so this no longer seems true.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72228
Merge commit 8e8ccf47 from llvm git (by me)
[MIPS] Don't emit R_(MICRO)MIPS_JALR relocations against data symbols
The R_(MICRO)MIPS_JALR optimization only works when used against functions.
Using the relocation against a data symbol (e.g. function pointer) will
cause some linkers that don't ignore the hint in this case (e.g. LLD prior
to commit 5bab291) to generate a relative branch to the data symbol
which crashes at run time. Before this patch, LLVM was erroneously emitting
these relocations against local-dynamic TLS function pointers and global
function pointers with internal visibility.
Reviewers: atanasyan, jrtc27, vstefanovic
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72571
These two changes should allow using lld for MIPS64 (and maybe also MIPS32)
by default.
The second commit is not strictly necessary for clang+lld since LLD9 will
not perform the R_MIPS_JALR optimization (it was only added for 10) but it
is probably required in order to use recent ld.bfd.
Reviewed By: dim, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23203
