Commit Graph

24 Commits

Author SHA1 Message Date
Bruce Evans
92971f1fd7 Register tty software interrupt handlers at run time using register_swi()
instead of at compile time using ifdefs.

Use _swi_null instead of dummycamisr.  CAM and dpt should call
register_swi() instead of hacking on ihandlers[] directly.
1998-08-11 17:01:32 +00:00
Bruce Evans
18c5a6c435 Implemented dynamic registration of software interrupt handlers. Not
used yet.

Use dummy SWI handlers to avoid some checks for null pointers.
1998-08-11 15:08:13 +00:00
Jonathan Lemon
a69546de82 Extend cpl workaround so that it applies when we are returning to
user-mode as well as vm86 mode.
1998-07-27 16:51:33 +00:00
Jonathan Lemon
640c4313af Add the ability to make real-mode BIOS calls from the kernel. Currently,
everything is contained inside #ifdef VM86, so this option must be
present in the config file to use this functionality.

Thanks to Tor Egge, these changes should work on SMP machines.  However,
it may not be throughly SMP-safe.

Currently, the only BIOS calls made are memory-sizing routines at bootup,
these replace reading the RTC values.
1998-03-23 19:52:59 +00:00
Tor Egge
02c1dc3bbc When entering the apic version of slow interrupt handler, level
interrupts are masked, and EOI is sent iff the corresponding ISR bit
is set in the local apic. If the CPU cannot obtain the interrupt
service lock (currently the global kernel lock) the interrupt is
forwarded to the CPU holding that lock.

Clock interrupts now have higher priority than other slow interrupts.
1998-03-03 22:56:30 +00:00
Tor Egge
5c623cb649 Add support for low resolution SMP kernel profiling.
- A nonprofiling version of s_lock (called s_lock_np) is used
    by mcount.

  - When profiling is active, more registers are clobbered in
    seemingly simple assembly routines. This means that some
    callers needed to save/restore extra registers.

  - The stack pointer must have space for a 'fake' return address
    in idle, to avoid stack underflow.
1997-12-15 02:18:35 +00:00
Steve Passe
58e63a06b4 Disable the TEST_CIL code till I can commit the complete solution.
Noticed by:	Peter Wemm <peter@netplex.com.au>
1997-10-13 00:01:53 +00:00
Steve Passe
33be7322dc Fixed a foobar on my part that broke non-SMP kernels. (I need some sleep...) 1997-09-29 05:32:02 +00:00
Steve Passe
10de100e2e Screwed the debug for the cil deadlock, another 3 hours down the tubes... 1997-09-29 00:04:33 +00:00
Steve Passe
c2d4a15648 Added a couple short-term debugs and a fix to the SPIN_MAX variable.
Debugs are an attempt to ferret out the PUSHDOWN_LEVEL_3 deadlock.
1997-09-28 19:34:48 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
Steve Passe
20233f27f4 General cleanup of the lock pushdown code. They are grouped and enabled
from machine/smptests.h:

#define PUSHDOWN_LEVEL_1
#define PUSHDOWN_LEVEL_2
#define PUSHDOWN_LEVEL_3
#define PUSHDOWN_LEVEL_4_NOT
1997-09-07 22:04:09 +00:00
Steve Passe
34162fc615 Support for the new FAST_HI algorithm, enabled.
Preliminary support for the INTR_SIMPLELOCK algorithm, disabled.
Note that this code is NOT ready.
1997-08-29 18:45:23 +00:00
Steve Passe
886e789627 The last of the encapsolation of cpl/spl/ipending things into a critical
region protected by the simplelock 'cpl_lock'.

Notes:

 - this code is currently controlled on a section by section basis with
   defines in machine/param.h.  All sections are currently enabled.

 - this code is not as clean as I would like, but that can wait till later.

 - the "giant lock" still surrounds most instances of this "cpl region".
   I still have to do the code that arbitrates setting cpl between the
   top and bottom halves of the kernel.

 - the possibility of deadlock exists, I am committing the code at this
   point so as to exercise it and detect any such cases B4 the "giant lock"
   is removed.
1997-08-24 00:05:37 +00:00
Steve Passe
201ef2f3f3 Another boo-boo, this file defines cil. 1997-08-21 05:19:26 +00:00
Steve Passe
7b185ef809 Preperation for moving cpl into critical region access.
Several new fine-grained locks.
New FAST_INTR() methods:
 - separate simplelock for FAST_INTR, no more giant lock.
 - FAST_INTR()s no longer checks ipending on way out of ISR.
sio made MP-safe (I hope).
1997-08-20 05:25:48 +00:00
Steve Passe
a5e8237d2a Oops, fix breakage to UP kernel. 1997-08-10 21:18:01 +00:00
Steve Passe
e7802310d2 Added trap specific lock calls: get_fpu_lock, etc.
All resolve to the GIANT_LOCK at this time, it is purely a logical partitioning.
1997-08-10 20:59:07 +00:00
John Dyson
48a09cf276 VM86 kernel support.
Work done by BSDI, Jonathan Lemon <jlemon@americantv.com>,
	Mike Smith <msmith@gsoft.com.au>, Sean Eric Fagan <sef@kithrup.com>,
	and probably alot of others.
Submitted by:	Jnathan Lemon <jlemon@americantv.com>
1997-08-09 00:04:06 +00:00
Steve Passe
d1283d9c9d Converted the TEST_LOPRIO code to default.
removed PEND_INTS 1st try
direct call to MPtrylock
1997-07-31 05:42:06 +00:00
Steve Passe
812e4da7a8 New simple_lock code in asm:
- s_lock_init()
 - s_lock()
 - s_lock_try()
 - s_unlock()

Created lock for IO APIC and apic_imen  (SMP version of imen)
 - imen_lock

Code to use imen_lock for access from apic_ipl.s and apic_vector.s.
Moved this code *outside* of mp_lock.

It seems to work!!!
1997-07-23 20:47:19 +00:00
Bruce Evans
43ba542895 Store SWI_MASK in a variable so that LKMs can use it portably. 1997-07-21 16:43:48 +00:00
Peter Wemm
dfa67ec76e Store the macro values for SWI_TTY_MASK and SWI_NET_MASK in variables to
that lkm's can use them for fiddling the masks without being dependent on
which mode the kernel is compiled in (SMP or UP).  This is particularly
for ppp_tty.c which has some domain crossing between the net and tty
subsystems.  The values are not used in the spl code, they are for
reference only (ie: the compiled code uses immediate values rather than
an indirect 32 bit address and 32 bit data fetch).
1997-05-31 09:03:52 +00:00
Steve Passe
81c1993f87 Split vector.s into UP and SMP specific files:
- vector.s		<- stub called by i386/exception.s
 - icu_vector.s		<- UP
 - apic_vector.s	<- SMP

Split icu.s into UP and SMP specific files:
 - ipl.s		<- stub called by i386/exception.s (formerly icu.s)
 - icu_ipl.s		<- UP
 - apic_ipl.s		<- SMP

This was done in preparation for massive changes to the SMP INTerrupt
mechanisms.  More fine tuning, such as merging ipl.s into exception.s,
may be appropriate.
1997-05-26 17:58:27 +00:00