Allow guests to set the RTC bit in the ACPI PM control register.
This eliminates an annoying (and harmless) Linux kernel boot message.
PR: 244721
Submitted by: Jose Luis Duran
MFC after: 1 week
The NVMe specification requires unused entries in the Identify, Active
Namespace ID data to be zero. Fix is bzero the provided page, similar to
what is done for the Namespace Descriptors list.
Fixes UNH Tests 2.6 and 2.9
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24901
Dataset Management range specifications may have a zero length (a.k.a.
an empty range definition). Handle the case of all ranges being empty by
completing with Success (DSM commands are advisory only). For
Deallocate, skip empty range definitions when sending TRIM's to the
backing storage.
Fixes UNH Test 2.2.4
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24900
If the Predictable Latency Mode is not supported, NVMe Controllers must
return Invalid Field in Command status for the Get Features command
with IDs:
- Predictable Latency Mode Config
- Predictable Latency Mode Window
Fixes UNH Tests 3.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24899
This adds support for NVMe Get Features, Interrupt Vector Config
parameter error checking done by the UNH compliance tests.
Fixes UNH Tests 1.6.8 and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24898
This commit updates the Identify Controller data to advertise the
Controller supports a single firmware slot and that firmware slot 1 is
read-only. Additionally, it returns an "Invalid Firmware Slot" error
when the host issues any Firmware Commit command (a.k.a. Firmware
Activate).
Fixes UNH Test 5.5.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24897
This adds support to bhyve's NVMe device emulation for processing Async
Event Requests but not returning them (i.e. Async Event Notifications).
Fixes UNH Test 5.5.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24896
Add checks that the combination of Starting LBA and Number of Logical
Blocks in a command will not exceed the range of the underlying storage.
Note that because NVMe specifices the Starting LBA as a uint64_t, care
must be taken when converting it and the block count to avoid an integer
overflow.
Fixes UNH Tests 2.2.3, 2.3.2, and 2.4.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24895
SMART data in NVMe includes statistics for number of read and write
commands issued as well as the number of "data units" read and written.
NVMe defines "data unit" as thousands of 512 byte blocks (e.g. 1 data
unit is 1-1,000 512 byte blocks, 3 data units are 2,001-3,000 512 byte
blocks).
This patch implements counters for:
- Data Units Read
- Data Units Written
- Host Read Commands
- Host Write Commands
and exposes the values when the guest reads the SMART/Health Log Page.
Fixes UNH Test 1.3.8
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24894
For NVMe emulation, validate the Data Set Management LBA ranges do not
exceed the capacity of the backing storage. If they do, return an "LBA
Out of Range" error.
Fixes UNH Test 2.2.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24893
NVMe controllers advertise their Max Data Transfer Size (MDTS) to limit
the number of page descriptors in an I/O request. Take advantage of this
and size the struct pci_nvme_ioreq accordingly.
Ensuring these values match both future-proofs the code and allows
removing some complexity which only exists to handle this possibility.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24891
Split the NVM I/O function (i.e. nvme_opc_write_read) into separate
functions - one for RAM based backing-store and another for disk based
backing-store for easier maintenance. No functional changes.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24890
The Format NVM command mainly allows the host to specify the block size
and protection information used for the Namespace. As the bhyve
implementation simply maps the capabilities of the backing storage
through to the guest, there isn't anything to implement. But a side
effect of the format is the NVMe Controller shall not return any data
previously written (i.e. erase previously written data). This patch
implements this later behavior to provide a compliant implementation.
Fixes UNH Test 1.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24889
Create a generic Get/Set Features by saving off the contents of CDW11
from the Set command and returning the saved value in the completion of
the Get command. Implementation allows providing optional implementation
for both Set and Get.
Add infrastructure to determine which feature ID's are namespace
specific and flag violations of this category of error.
Also adds the feature specific behavior of Set Features, Number of
Queues to only allow this command once per Controller reset.
Fixes UNH Tests 1.2, 5.4, and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24887
Fix the logic in nvme_opc_get_log_page to calculate the number of DWORDS
(uint32_t) instead of WORDS (uint16_t) for the byte length. And only
return the allowed number of Log Page bytes as determined by the user
request and actual size of the requested log page.
Fixes UNH Test 1.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24885
Consolidate the code which writes Completion Queue entries and updates
the CQ doorbell value. While in the neighborhood, convert the "toggle CQ
phase bit" code to use an XOR operation instead of an "if/else" branch.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24882
The NVMe code attempted to ensure thread safety through a combination of
using atomics and a "busy" flag. But this approach leads to unavoidable
race conditions.
Fix is to use per-queue mutex locks to ensure thread safety within the
queue processing code. While in the neighborhood, move all the queue
initialization code to a common function.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19841
This adds support for the NVMe I/O command Flush. For block-based
devices, submit a DIOCGFLUSH to the backing storage. Otherwise, command
is treated like a NOP and completes with a Successful status.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24880
This refactors the NVMe I/O command processing function to make adding
new commands easier. The main change is to move command specific
processing (i.e. Read/Write) to separate functions for each NVMe I/O
command and leave the common per-command processing in the existing
pci_nvme_handle_io_cmd() function.
While here, add checks for some common errors (invalid Namespace ID,
invalid opcode, LBA out of range).
Add myself to the Copyright holders
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24879
Convert the debug and warning logging macros to be parameterized and
correctly use bhyve's PRINTLN macro.
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24878
but in System III in the AT&T world.
Examination of the TUHS archives shows this was present in 4.3-Reno
and System III.
Reviewed by: 0mp@, allanjude@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D25479
If the interfaces on which wpa_supplicant is to run are not known or do
not exist, wpa_supplicant can match an interface when it arrives. Each
matched interface is separated with -M argument and the -i argument now
allows for pattern matching.
As an example, the following command would start wpa_supplicant for a
specific wired interface called lan0, any interface starting with wlan
and lastly any other interface. Each match has its own configuration
file, and for the wired interface a specific driver has also been given.
wpa_supplicant \
-M -c wpa_wired.conf -ilan0 -D wired \
-M -c wpa1.conf -iwlan* \
-M -c wpa2.conf
PR: 247177
Reported by: greg@unrelenting.technology
MFC after: 1 month
Related to: ports r540412
The TRB processing loop could potentially call a back-end twice
with the same status transaction. While this was generally benign,
some code paths in the tablet backend weren't set up to handle
this case, resulting in a NULL dereference.
Fix by
- returning a STALL error when an invalid request was seen in the backend
- skipping a call to the backend if the number of packets in a status
transaction was zero (this code fragment was taken from the Intel ACRN
xhci backend)
PR: 246964
Reported by: Ali Abdallah
Discussed with: Leon Dang (author)
Reviewed by: jhb (#bhyve), Leon Dang
Approved by: jhb
Obtained from: Intel ACRN (partially)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25228
Introduce -D flag that allows for the VM to be destroyed on guest initiated
power-off by the bhyve(8) process itself.
This is quality of life change that allows for simpler deployments without
the need for bhyvectl --destroy.
Requested by: swills
Reviewed by: 0mp (manpages), grehan, kib, swills
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25414
If userspace has a newer bhyve than the kernel, it may be able to decode
and emulate some instructions vmm.ko is unaware of. In this scenario,
reset decoder state and try again.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24464
Update 4.2.8p14 --> 4.2.8p15
Summary: Systems that use a CMAC algorithm in ntp.keys will not release
a bit of memory on each packet that uses a CMAC keyid, eventually causing
ntpd to run out of memory and fail. The CMAC cleanup from
https://bugs.ntp.org/3447, part of ntp-4.2.8p11, introduced a bug whereby
the CMAC data structure was no longer completely removed.
MFC after: 3 days
Security: NTP Bug 3661
The current message when bootstapping pkg fails for any reason implies that pkg
is not available. We have the error code from fetch so if bootstrap failed due
to address resolution say so.
Reviewed by: bapt, bz
Approved by: bz (co-mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D25323
fs_summary_info structure. This change was originally done
by the CheriBSD project as they need larger pointers that
do not fit in the existing superblock.
This cleanup of the superblock eases the task of the commit
that immediately follows this one.
Suggested by: brooks
Reviewed by: kib
PR: 246983
Sponsored by: Netflix
- Update synopsis to present all available arguments.
- Consistently call the argument specifying an arbitrary directory a
"directory".
- Do not put macros into -width argument to Bl. They do not expand there.
- Stylize command modifiers like "daily" with Cm instead of Pa. While
technically periodic(8) operates on directories with such names, it is
confusing from the perspective of the manual page reader as Pa and Ar are
stylized the same way. Also, I cannot recall a single manual page where
Pa would be used to describe the syntax of command-line arguments.
MFC after: 2 weeks
