While there, also fix the setting of the SYN related flag.
Reviewed by: rrs
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D35862
Originally, wtap_node_write() gets the wrong softc by iterating V_inet and
gets the ifp by string comparison, then gets softc by ifp->if_softc.
However, ifp->if_softc will not point to the correct softc owned by
ieee80211com, and thus causes a kernel panic.
Fix it by assigning softc to cdev's si_drv1 in wtap_vap_create()
and get the softc directly via dev->si_drv1 in wtap_node_write().
The cdev created by wtap_vap_create() use the name of ieee80211com
rather than the vap's name. It will cause the second vap based on
the same ieee80211com as first vap fail to create a device node
because the device node is already exists. Fix it by assigning
vap->iv_ifp->if_xname to cdev's name.
Sponsored by: Google, Inc. (GSoC 2022)
Reviewed by: adrian, cy, bz
Differential Revision: https://reviews.freebsd.org/D35752
* Make nhgrp_get_nhops() return const struct weightened_nhop to
indicate that the list is immutable
* Make nhgrp_get_group() return the actual group, instead of
group+weight.
MFC after: 2 weeks
The test was failing due to the assert on lack of MSG_TRUNC flag in the
output flags of recvmsg().
The code passed MSG_TRUNC, along with sufficient-size buffer to hold the
message to-be-received to the recvmsg(), and expected MSG_TRUNC to be
returned as well.
This is not exactly correct as a) MSG_TRUNC was not even a supported
recvmsg() flag before be1f485d7d and b) it violates POSIX, as
POSIX states it should be set only "If a message is too long to fit in
the supplied buffers,".
The test was working before as the kernel copied input flags to the
output flags. be1f485d7d changed that behaviour to clear MSG_TRUNC
if it was present on the input.
Fix the test by checking POSIX-defined behaviour.
Discussed with: glebius
Convert the last remaining pieces of old-style debug messages
to the new debugging framework.
Differential Revision: https://reviews.freebsd.org/D35994
MFC after: 2 weeks
Currently, rt_addrinfo(info) serves as a main "transport" moving
state between various functions inside the routing subsystem.
As all of the fields are filled in directly by the customers, it
is problematic to maintain consistency, resulting in repeated checks
inside many functions. Additionally, there are multiple ways of
specifying the same value (RTAX_IFP vs rti_ifp / rti_ifa) and so on.
With the upcoming nhop(9) kpi it is possible to store all of the
required state in the nexthops in the consistent fashion, reducing the
need to use "info" in the KPI calls.
Finally, rt_addrinfo structure format was derived from the rtsock wire
format, which is different from other kernel routing users or netlink.
This cleanup simplifies upcoming nhop(9) kpi and netlink introduction.
Reviewed by: zlei.huang@gmail.com
Differential Revision: https://reviews.freebsd.org/D35972
MFC after: 2 weeks
Mark dst/mask public API functions fields as const to clearly
indicate that these parameters are not modified or stored in
the datastructure.
Differential Revision: https://reviews.freebsd.org/D35971
MFC after: 2 weeks
Expiration time is actually a path property, not a route property.
Move its storage to nexthop to simplify upcoming nhop(9) KPI changes
and netlink introduction.
Differential Revision: https://reviews.freebsd.org/D35970
MFC after: 2 weeks
Identify each of the superblock validation checks as either a
warning or a fatal error. Any integrity check that can cause a
system hang or crash is marked as fatal. Those that may simply
lead to poor file layoutor other less good operating conditions
are marked as warning.
Normally both fatal and warning are treated as errors and prevent
the superblock from being loaded. A new flag, UFS_NOWARNFAIL, is
added. When passed to ffs_sbget() it will note warnings that it
finds, but will still proceed with loading the superblock. Note
that when UFS_NOWARNFAIL is used, it also includes UFS_NOHASHFAIL.
No legitimate superblocks should fail as a result of these changes.
Further updates based on analysis of the way the fields are used
in the various filesystem macros defined in fs.h.
Eliminate several checks for non-negative values where the fields
are checked for specific values. Since these specific values are
non-negative, if the value is a verified positive value then it
cannot be negative and such a check is redundant and unnecessary.
No legitimate superblocks should fail as a result of these changes.
- new sentence, new line
- unknown AT&T UNIX version: At v7
- no blank before trailing delimiter
- reference the ASCII(8) manual page
MFC after: 5 days
Rather than trying to shoehorn flags into the requested superblock
address, create a separate flags parameter to the ffs_sbget()
function in sys/ufs/ffs/ffs_subr.c. The ffs_sbget() function is
used both in the kernel and in user-level utilities through export
to the sbget() function in the libufs(3) library (see sbget(3)
for details). The kernel uses ffs_sbget() when mounting UFS
filesystems, in the glabel(8) and gjournal(8) GEOM utilities,
and in the standalone library used when booting the system
from a UFS root filesystem.
The ffs_sbget() function reads the superblock located at the byte
offset specified by its sblockloc parameter. The value UFS_STDSB
may be specified for sblockloc to request that the standard
location for the superblock be read.
The two existing options are now flags:
UFS_NOHASHFAIL will note if the check hash is wrong but will still
return the superblock. This is used by the bootstrap code to
give the system a chance to come up so that fsck can be run to
correct the problem.
UFS_NOMSG indicates that superblock inconsistency error messages
should not be printed. It is used by programs like fsck that
want to print their own error message and programs like glabel(8)
that just want to know if a UFS filesystem exists on a partition.
One additional flag is added:
UFS_NOCSUM causes only the superblock itself to be returned, but does
not read in any auxiliary data structures like the cylinder group
summary information. It is used by clients like glabel(8) that
just want to check for possible filesystem types. Using UFS_NOCSUM
skips the superblock checks for csum data which allows superblocks
that have corrupted csum data to be read and used.
The validate_sblock() function checks that the superblock has not
been corrupted in a way that can crash or hang the system. Unless
the UFS_NOMSG flag is specified, it will print out any errors that
it finds. Prior to this commit, validate_sblock() returned as soon
as it found an inconsistency so would print at most one message.
It now does all its checks so when UFS_NOMSG has not been specified
will print out everything that it finds inconsistent.
Sponsored by: The FreeBSD Foundation
The single line comment indicator '//' is only detected at the
beginning of a line or when following white space to allow URLs
in calendar entries.
MFC after: 3 days
Reorder a few checks to ensure fields have been checked before
using them to check other fields.
Add eight new checks mostly checking for non-negative values.
No legitimate superblocks should fail as a result of these changes.
Update iwlwifi 22000 firmware to -73 and rebuilds for 9000/9260.
Update the driver to accept the newer version.
Firmware was obtained from linux-firmware at
150864a4d73e8c448eb1e2c68e65f07635fe1a66.
Sponsored by: The FreeBSD Foundation
MFC after: 23 days
By convention, kernel threads must call kthread_exit() instead of
blindly returning from the thread function. We have some safety measure
in fork_exit(), which checks for the P_KPROC p_flag and does
kthread_exit() for kernel thread that forgot to do it itself.
But this workaround only works for kernel threads belonging to the
kernel process. If a kernel thread is attached to the normal process
with live userspace, and does not call kthread_exit(), then the
workaround is not activated, and for amd64 at least, the return from the
thread function/fork_exit() results in the return to userspace with the
copy of frame from the thread that did kthread_add().
Practically for smrstress, this destroys the user stack of the still
active frame in the other thread, which was the caller of kthread_add().
Fix it by adding kthread_exit() to the thread function.
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D35999
Since IOMMU map entries store a reference to the domain in which they
reside, there is no need to pass the domain to iommu_gas_free_entry(),
iommu_gas_free_space(), and iommu_gas_free_region().
Push down the acquisition and release of the IOMMU domain lock into
iommu_gas_free_space() and iommu_gas_free_region().
Both of these changes allow for simplifications in the callers of the
functions without really complicating the functions themselves.
Moreover, the latter change eliminates the direct use of the IOMMU
domain lock from the x86-specific DMAR code.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35995
Implement Linux-variant of MSG_TRUNC input flag used in recv(), recvfrom() and recvmsg().
Posix defines MSG_TRUNC as an output flag, indicating packet/datagram truncation.
Linux extended it a while (~15+ years) ago to act as input flag,
resulting in returning the full packet size regarless of the input
buffer size.
It's a (relatively) popular pattern to do recvmsg( MSG_PEEK | MSG_TRUNC) to get the
packet size, allocate the buffer and issue another call to fetch the packet.
In particular, it's popular in userland netlink code, which is the primary driving factor of this change.
This commit implements the MSG_TRUNC support for SOCK_DGRAM sockets (udp, unix and all soreceive_generic() users).
PR: kern/176322
Reviewed by: pauamma(doc)
Differential Revision: https://reviews.freebsd.org/D35909
MFC after: 1 month
Add the missing implementation of linuxkpi_cfg80211_bss_flush().
without this we get unresolved symbols and drivers won't load.
Reported by: eduardo, Berislav Purgar (bpurgar gmail.com)
MFC after: 3 days
X-MFC-Squash: b0f7376822
Add a shortcut for invokging ${SRCTOP}/tools/boot/universe.sh by
creating a 'universe' target in src/stand. This will make it easier to
test out all the different combinations of boot loaders that we build.
Sponsored by: Netflix
Since both EFI and the future kboot will benefit from a 'quit' command,
move it from efi/loader/main.c to common/commands.c. In EFI this command
exits back to the boot loader (which will cause the next BootXXXX in the
BootOrder list to be attempted). In kboot, this will exit back to
whatever called loader.kboot. In uboot this will cause a reset (which
will restart uboot, not quite a simple exit, but will look similar)
and in OFW it will execute OF_exit which should return to the
openfirmware prompt.
Sponsored by: Netflix
Sometimes we need to reset a PCIe bus, but sometimes it breaks the
downstream device(s). Since, from my testing, this is only needed for
Radeon cards installed in the AmigaOne machines because the card was
already initialized by firmware, make the reset dependent on a device
hint (hint.pcib.X.reset=1). With this, AmigaOne X5000 machines can have
other devices in the secondary PCIe slots.
Summary:
This is based on the Linux kernel commit
922bfd001d1ac02111ebbe0524aaab6ca7925521.
Reviewed by: mav (src)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35996
The reported problem is that some geli commands exit with a
success status when they should exit with a failed status.
The gctl_error() function is defined differently in the kernel
(in sys/geom/geom_ctl.c) versus in the geom user facilities (in
sbin/geom/misc/subr.c). In the kernel, calling gctl_error() causes
an error return to be set while in the user version it does not.
It was only by a quirk that had been added to the user geom return
processing that I "cleaned up" that the lack of the user implementaion
to set the error return showed up.
This patch adds the missing setting of the error code when calling
the user facility gctl_error().
Reported by: Jenkins
Debugging by: Alan Somers
Debugging by: Cy Schubert
Debugging by: Li-Wen Hsu
While working on new and updates to drivers more structs, fields,
functions, .. were found, had to be shuffled around, ..
Some of these are (so far still dummy) functions or not properly
typed fields. The IEEE80211_HE_ constants are all still dummy.
This was msotly as a start to make new (out-of-tree) things compile.
Sponsored by: The FreeBSD Foundation (minor VHT/chan width bits)
MFC after: 1 week
While working on new and updates to drivers more skbuff changes
came up. Sort out the list/prev/next header problem and add more
(so far dummy) functions needed.
MFC after: 1 week
While 80P80 is less likely to be used, VHT160 (a single contiguous
width) is harder to acquire but also preferable so return that first.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D35977
In ieee80211_vht_adjust_channel() we have to check for all possible
IEEE80211_FVHT_VHT* options using the mask rather than just checking
for IEEE80211_FVHT_VHT; ieee80211_vhtchanflags() (contrary to its
HT counterpart) only returns the "highest" flag nor or-ing them together
with the base flag. For the moment this seems to make sense as with
more width options we'd add a pyramid.
Later on, in the same function when we get VHT160 actually go and look
for VHT160 and not VHT80.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D35977
Add the fields for VHT (2Ghz and 5Ghz) to report back by media_status
so we actually have a chance to get the right information.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D35977
Start adding more fields to DDB output related to VHT (11ac) and
mark COM, VAP, and STA more explicitly to make show all vaps /..
more readable.
Sponsored by: The FreeBSD Foundaton
MFC after: 1 week
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D35977
