Commit Graph

1363 Commits

Author SHA1 Message Date
Peter Wemm
5915fb72fb Prototype (but functional) Linux-ish /dev/nvram interface to the extra
114 bytes of cmos ram in the PC clock chip.  The big difference between
this and the Linux version is that we do not recalculate the checksums
for bytes 16..31.

We use this at work when cloning identical machines - we can copy the
bios settings as well.  Reading /dev/nvram gives 114 bytes of data but
you can seek/read/write whichever bytes you like.

Yes, this is a "foot, gun, fire!" type of device.
2007-06-15 22:58:14 +00:00
David Malone
041b706b2f Despite several examples in the kernel, the third argument of
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.

Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.

In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported.  In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
2007-06-04 18:25:08 +00:00
John Baldwin
90dea4f9a7 When trying to allocate a PnP BIOS memory resource, the code loops trying
to move up the start address until the allocation succeeds.  If the
alignment of the resource was 0, then the code would keep trying the same
request in an infinite loop and hang.  Force the request to always move
start up by at least 1 byte each time through the loop.
2007-04-17 15:14:23 +00:00
Bruce Evans
d78180f8f5 Partial fix for a bug in rev.1.231. If suspend/resume clobbers the
RTC state, then it may clobber the RTC index register, so the index
register must be restored before using it to restore control registers
in rtc_restore().

The following problems remain:
- rtc_restore() is only called if pmtimer is configured.  Buggy
  suspend/resumes are more likely to clobber the index register than
  a control register, so pmtimer is more needed than it used to be.
- pmtimer doesn't exist for amd64.
- Restoring of the RTC state may race with rtcintr().  If an RTC
  interrupt is handled before the state is restored, then rtcin(RTC_INTR)
  in rtcintr() may read from the wrong register, so rtcintr() may spin
  forever.  This may be mitigated by the most common state clobbering
  being to turn off RTC interrupts.
2007-03-05 09:10:17 +00:00
Yoshihiro Takahashi
de038d5ffc style(9). 2007-03-04 04:55:19 +00:00
John Baldwin
84d37a463a Use pause() rather than tsleep() on explicit global dummy variables. 2007-02-27 17:22:30 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Bruce Evans
71799af2d5 Cleaned up declaration and initialization of clock_lock. It is only
used by clock code, so don't export it to the world for machdep.c to
initialize.  There is a minor problem initializing it before it is
used, since although clock initialization is split up so that parts
of it can be done early, the first part was never done early enough
to actually work.  Split it up a bit more and do the first part as
late as possible to document the necessary order.  The functions that
implement the split are still bogusly exported.

Cleaned up initialization of the i8254 clock hardware using the new
split.  Actually initialize it early enough, and don't work around it
not being initialized in DELAY() when DELAY() is called early for
initialization of some console drivers.

This unfortunately moves a little more code before the early debugger
breakpoint so that it is harder to debug.  The ordering of console and
related initialization is delicate because we want to do as little as
possible before the breakpoint, but must initialize a console.
2007-01-23 08:01:20 +00:00
Ceri Davies
18929073b9 Be consistent with the spelling of "dependent" in user-visible places.
PR:		kern/27429
Submitted by:	T. William Wells
2006-12-30 11:55:47 +00:00
Bruce Evans
b73057227b Optimized RTC accesses by avoiding null writes to the index register
and by only delaying when an RTC register is written to.  The delay
after writing to the data register is now not just a workaround.

This reduces the number of ISA accesses in the usual case from 4 to
1.  The usual case is 2 rtcin()'s for each RTC interrupt.  The index
register is almost always RTC_INTR for this.  The 3 extra ISA accesses
were 1 for writing the index and 2 for delays.  Some delays are needed
in theory, but in practice they now just slow down slow accesses some
more since almost eveyone including us does them wrong so modern systems
enforce sufficient delays in hardware.  I used to have the delays ifdefed
out, but with the index register optimization the delays are rarely
executed so the old magic ones can be kept or even implemented non-
magically without significant cost.

Optimizing RTC interrupt handling is more interesting than it used to
be because RTC interrupts are currently needed to fix the more efficient
apic timer interrupts on some systems.  apic_timer_hz is normally 2000
so the RTC interrupt rate needs to be 2048 to keep the apic timer
firing on such systems.  Without these changes, each RTC interrupt
normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC
accesses).  Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz
takes 2-3% of a CPU.  Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
Poul-Henning Kamp
e4c9547050 Use calendaric calculation support from subr_clock.c instead of home-rolled.
Eventually, this RTC should probably use subr_rtc.c as well
2006-10-02 16:18:40 +00:00
Poul-Henning Kamp
b69f71eb29 Second part of a little cleanup in the calendar/timezone/RTC handling.
Split subr_clock.c in two parts (by repo-copy):
   subr_clock.c contains generic RTC and calendaric stuff. etc.
   subr_rtc.c contains the newbus'ified RTC interface.

Centralize the machdep.{adjkerntz,disable_rtc_set,wall_cmos_clock}
sysctls and associated variables into subr_clock.c.  They are
not machine dependent and we have generic code that relies on being
present so they are not even optional.
2006-10-02 15:42:02 +00:00
Poul-Henning Kamp
f645b0b51c First part of a little cleanup in the calendar/timezone/RTC handling.
Move relevant variables to <sys/clock.h> and fix #includes as necessary.

Use libkern's much more time- & spamce-efficient BCD routines.
2006-10-02 12:59:59 +00:00
Warner Losh
ddebcb409b Eliminate one set of XBOX #ifdefs. The Xbox code just needs to set a
different TIMER_FREQ value than default.  Accomplish this via the
config file rather than via an #ifdef.
2006-08-09 23:47:38 +00:00
Warner Losh
360de69338 (apply '(lambda (reformat-region 'style-9-parens)) (read-file isahint.c))
remove redundant parens, per style(9) to reduce that limp, lispy feeling.
2006-07-08 16:50:10 +00:00
Warner Losh
3c7c9eb558 Remove old GENERIC kludge. We no longer need to skip devices named
atkbd.  Version 1.162 of GENERIC fixed this problem in April of 1999.
Subsequent to that, the hints data was removed from GENERIC and move
to hints files.  All the hints file ever created have atkbd at the
right location.  This should have been removed just after RELENG_4 was
branched (and likely around 4.5 in RELENG_4).

MFC After: 3 days
2006-07-08 15:51:55 +00:00
Marius Strobl
acb8c14985 Make the ISAPNP code optional and only enable it on i386 and pc98 (used
for CBUS-PNP cards there) by default, as there are no amd64 and sparc64
machines with ISA slots and which therefore could make use of this code
known to exist. For sparc64 this additionally allows to get rid of the
compat shims for in{b,w,l}()/out{b,w,l}() etc and the associated hacks.

OK'ed by:	imp, peter
2006-06-12 21:07:13 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Rink Springer
5fa7c51ff6 Committed the xbox syscons(8)-able console driver.
Reviewed by:    arch@ (no comments)
Approved by:    imp (mentor)
2006-03-03 14:52:57 +00:00
John Baldwin
b439e431bf Tweak how the MD code calls the fooclock() methods some. Instead of
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly.  In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures.  Basically,
  all the archs were taking a trapframe and converting it into a clockframe
  one way or another.  Now they can just extract the PC and usermode values
  directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
  accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
  the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
  timecounter, call hardclock() directly.  This removes an extra
  conditional check from every clock interrupt on Alpha on the BSP.
  There is probably room for even further pruning here by changing Alpha
  to use the simplified timecounter we use on x86 with the lapic timer
  since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
  is false, so add a KASSERT() to that affect and remove a condition
  to slightly optimize the non-lapic case.
- Change prototypeof  arm_handler_execute() so that it's first arg is a
  trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.

Tested on:	alpha, amd64, arm, i386, ia64, sparc64
Reviewed by:	bde (mostly)
2005-12-22 22:16:09 +00:00
Peter Wemm
737429bc96 MFamd64 rev 1.223: Use the TSC to implement DELAY() if not marked broken
and it has been calibrated.
2005-12-13 19:08:55 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Warner Losh
51ef421d92 Add support for XBOX to the FreeBSD port. The xbox architecture is
nearly identical to wintel/ia32, with a couple of tweaks.  Since it is
so similar to ia32, it is optionally added to a i386 kernel.  This
port is preliminary, but seems to work well.  Further improvements
will improve the interaction with syscons(4), port Linux nforce driver
and future versions of the xbox.

This supports the 64MB and 128MB boxes.  You'll need the most recent
CVS version of Cromwell (the Linux BIOS for the XBOX) to boot.

Rink will be maintaining this port, and is interested in feedback.
He's setup a website http://xbox-bsd.nl to report the latest
developments.

Any silly mistakes are my fault.

Submitted by: Rink P.W. Springer rink at stack dot nl and
	Ed Schouten ed at fxq dot nl
2005-11-09 03:55:40 +00:00
Marius Strobl
c7974ff135 Fix an endianness issue in pnp_eisaformat(). This corrects printing PnP IDs
on big-endian archs like sparc64, e.g.:
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 pnpid @HEd041 on isa0
is now correctly printed as:
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 pnpid PNP0501 on isa0

There are probably other endianness issues lurking in the PnP code which
however aren't exhibited on sparc64 as the PnP devices there are sort of
PnP BIOS devices rather than ISA PnP devices.

Tested on:	i386, sparc64
MFC after:	1 week
2005-09-28 15:01:58 +00:00
Warner Losh
a81804d94f Add pnp and location info for the ISA bus. The pnp info is the
primary vendor id for this device.  The location is empty because ISA
doesn't give one a way to generally locate a card.  PNP BIOS entries
do provide a way to locate cards, as do isa pnp cards.  These
locations will be added as soon as the code to remember them is
written.
2005-08-01 07:03:10 +00:00
John Baldwin
db015a9153 Fixup some more fallout from the lapic/i8254 changes:
- Make sure timer0_max_count is set to a correct value in the lapic case.
- Revert i8254_restore() to explicitly reprogram timer 0 rather than
  calling set_timer_freq() to do it.  set_timer_freq() only reprograms
  the counter if the max count changes which it never does on resume.  This
  unbreaks suspend/resume for several people.

Tested by:	marks, others
Reviewed by:	bde
MFC after:	3 days
2005-07-13 15:43:21 +00:00
John Baldwin
623b1a868e Remove a || 1 that crept into the i8254 commit and was subsequently
copied and pasted.  I had actually tested without this change in my
trees as had the other testers.

Reported by:	bde, Rostislav Krasny rosti dot bsd at gmail dot com
Approved by:	re (scottl)
Pointy hat to:	jhb
2005-07-05 20:13:12 +00:00
John Baldwin
7df0015945 Use a simpler implementation for the i8254 timecounter when using the lapic
timer since irq0 isn't being driven at hz in that case and we don't need to
try to handle edge cases with rollover, etc. that require irq0 to be firing
for the timecounter to actually work.

Submitted by:	phk
Tested by:	schweikh
Approved by:	re (scottl)
2005-07-01 15:47:27 +00:00
Marius Strobl
520b635320 - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source
files after they were repo-copied to sys/dev/atkbdc. The sources of
  atkbdc(4) and its children were moved to the new location in preparation
  for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in
  order to not further scatter them over the whole tree which would have
  been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another
  reason for the repo-copies was that some of the sources were misfiled,
  e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging
  atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly.
  Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't
  ISA-specific.
- Separate the parts of atkbdc_isa.c which aren't actually ISA-specific
  but are shareable between different atkbdc(4) bus front-ends into
  atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use
  bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource()
  respectively in atkbdc_isa.c instead of rolling own versions.
- Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for
  atkbdc(4). PS/2 controllers and input devices are used on a couple of
  Sun OEM boards and occur on either the EBus or the ISA bus. Depending on
  the board it's either the only on-board mean to connect a keyboard and
  mouse or an alternative to either RS232 or USB devices.
- Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled
  without isa(4) (e.g. for EBus-only machines). This ISA-specific part
  isn't separated into its own source file, yet, as it requires more work
  than was feasible for 6.0 in order to do it in a clean way. Actually
  philip@ is working on a rewrite of psm(4) so a more comprehensive
  clean-up and separation of hardware dependent and independent parts is
  expected to happen after 6.0.

Tested on:	i386, sparc64 (AX1105, AXe and AXi boards)
Reviewed by:	philip
2005-06-10 20:56:38 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Yoshihiro Takahashi
b22bf66063 - Move bus dependent defines to {isa,cbus}_dmareg.h.
- Use isa/isareg.h rather than <arch>/isa/isa.h.

Tested on: i386, pc98
2005-05-14 10:14:56 +00:00
Yoshihiro Takahashi
24072ca35b - Move timerreg.h to <arch>/include and split i8253 specific defines into
i8253reg.h, and add some defines to control a speaker.
- Move PPI related defines from i386/isa/spkr.c into ppireg.h and use them.
- Move IO_{PPI,TIMER} defines into ppireg.h and timerreg.h respectively.
- Use isa/isareg.h rather than <arch>/isa/isa.h.

Tested on: i386, pc98
2005-05-14 09:10:02 +00:00
Yoshihiro Takahashi
d6c331a30d Remove unused IO_NPX* defines. 2005-05-12 12:36:31 +00:00
Matthew N. Dodd
2ca94fca7e Add ISACFGATTR_HINTS flag to allow detection of a device that was created
as a result of the hints mechanism.
2005-04-13 03:26:24 +00:00
Matthew N. Dodd
93fa9a8d72 Replace spl protection in rtcin() and writertc() with spinlocks
using the existing clock_lock mutex.
2005-04-12 20:49:31 +00:00
John Baldwin
d336ab43c6 - Don't enable periodic interrupts from the RTC by default in rtc_statusb.
Instead, explicitly enable them when we setup the interrupt handler.
  Also, move the setting of stathz and profhz down to the same place so
  that the code flow is simpler and easier to follow.
- Don't setup an interrupt handler for IRQ0 if we are using the lapic timer
  as it doesn't do anything productive in that case.
2005-03-24 21:34:16 +00:00
Warner Losh
36fed96550 Use STAILQ in preference to SLIST for the resources. Insert new resources
last in the list rather than first.

This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x).  This
also means that the pci code will once again print the resources in BAR
ascending order.
2005-03-18 05:19:50 +00:00
Peter Wemm
0cd202bb09 Whitespace sync with amd64. (Rather than re-add the extra blank lines
on amd64, I'm removing them here)
2005-03-11 22:10:25 +00:00
John Baldwin
dd1d2889f2 - Remove the BURN_BRIDGES marked support for hooking into the ISA timer 0
interrupt.
- Remove the timer_func variable as it now has a static value of
  hardclock() and is only used in one place.

Axe borrowed from:	phk
2005-03-09 15:33:58 +00:00
Ian Dowse
528433ba71 Save and restore the VGA state across a suspend-resume cycle. This
is particularly useful when VESA is available (either `options VESA'
or load the vesa module), as BIOSes in some notebooks may correctly
save and restore LCD panel settings using VESA in cases where calling
the video BIOS POST is not effective. On some systems it may also
be necessary to set the hw.acpi.reset_video sysctl to 0.
2005-02-28 21:06:14 +00:00
Poul-Henning Kamp
e70377df79 Use dynamic major number allocation. 2005-02-27 22:16:30 +00:00
John Baldwin
e8ce55117b Use the local APIC timer to drive the various kernel clocks on SMP machines
rather than forwarding interrupts from the clock devices around using IPIs:
- Add an IDT vector that pushes a clock frame and calls
  lapic_handle_timer().
- Add functions to program the local APIC timer including setting the
  divisor, and setting up the timer to either down a periodic countdown
  or one-shot countdown.
- Add a lapic_setup_clock() function that the BSP calls from
  cpu_init_clocks() to setup the local APIC timer if it is going to be
  used.  The setup uses a one-shot countdown to calibrate the timer.  We
  then program the timer on each CPU to fire at a frequency of hz * 3.
  stathz is defined as freq / 23 (hz * 3 / 23), and profhz is defined as
  freq / 2 (hz * 3 / 2).  This gives the clocks relatively prime divisors
  while keeping a low LCM for the frequency of the clock interrupts.
  Thanks to Peter Jeremy for suggesting this approach.
- Remove the hardclock and statclock forwarding code including the two
  associated IPIs.  The bitmap IPI handler has now effectively degenerated
  to just IPI_AST.
- When the local APIC timer is used we don't turn the RTC on at all, but
  we still enable interrupts on the ISA timer 0 (i8254) for timecounting
  purposes.
2005-02-08 20:25:07 +00:00
Poul-Henning Kamp
0c3c54da63 Since we are quite unlikely to ever face another platform which
uses the i8237 without trying to emulate the PC architecture move
the register definitions for the i8237 chip into the central include
file for the chip, except for the PC98 case which is magic.

Add new isa_dmatc() function which tells us as cheaply as possible
if the terminal count has been reached for a given channel.
2005-02-06 13:46:39 +00:00
John Baldwin
aa96fcdb61 Anytime we write to the RTC's status B register to possibly enable
interrupts, read from the interrupt status register to clear any pending
interrupts.  Otherwise in some rare cases the RTC would never fire any
interrupts as it constantly thinks it has an interrupt pending.

PR:		i386/17800
PR:		kern/76776
Submitted by:	Jose M. Alcaide jose at we dot lc dot ehu dot es
MFC after:	2 weeks
2005-02-03 19:06:03 +00:00
Warner Losh
784d07b40d Protect against wrapping. This appaers to fix some hangs that people
have seen in the isa pnp case where a resource buts up against
0xffffffff.  This would only impact when the board was booted without
ACPI.

Submitted by: Ed Maste (freebsd-stable <20050103145720.GA90754@sandvine.com>)
MFC After: 5 days
2005-01-23 03:03:58 +00:00
Philip Paeps
df616c9022 Make life for owners of Synaptics Touchpads more pleasant :-)
o Implement a shiny new algorithm to keep track of finger movement at
   slow speeds.  This dramatically reduces the level of questionable
   language from users trying to resize windows.

 o Properly catch the many extra buttons and dials which manufacturers
   are known to screw onto Synaptics touchpad controllers.  Currently,
   up to seven buttons are known to work, more should work too.

 o Add a number of sysctls allowing one to tune the driver to taste in
   a simple way:

     # Should the extra buttons act as axes or as middle button
     hw.psm.synaptics.directional_scrolls

     # These control the 'stickiness' at low speeds
     hw.psm.synaptics.low_speed_threshold
     hw.psm.synaptics.min_movement
     hw.psm.synaptics.squelch_level

PR:		kern/75725
Submitted by:	Jason Kuri <jay@oneway.com>
MFC after:	1 month
2005-01-10 13:05:58 +00:00
Warner Losh
86cb007f9f /* -> /*- for copyright notices, minor format tweaks as necessary 2005-01-06 22:18:23 +00:00
Philip Paeps
9fd851bb17 Reduce diffs to work in progress before checking in serious changes.
o Move the sysctls under debug.psm.* and hw.psm.* making them a bit
   clearer and more consistent with other drivers.

 o Remove the debug.psm_soft_timeout sysctl.  It was introduced many
   moons ago in r1.64 but never referenced anywhere.

 o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control
   the behaviour of taps on touchpads.  People might like to fiddle
   with these if tapping seems to slow or too fast for them.

 o Add debug.psm.loglevel as a tunable so that verbosity can be set
   easily at boot-time (to watch probes and such) without having to
   compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
Warner Losh
9b01161ec3 Formatting nits 2004-12-27 18:18:38 +00:00
Warner Losh
812fb8f294 Get rid of #ifdef for legacy system. Move that into the MD code.
Export minimal symbols to allow this to happen.
2004-12-24 23:03:17 +00:00