but assumes that a thread reference was already obtained on the passed
device. Use the function from physio(), to avoid two extra dev_mtx
lock and unlock. Note that physio() is always used as the cdevsw
method, or is called from a cdevsw method, and the caller already owns
the reference.
dev_strategy() is left to keep KPI intact, but now it is implemented
as a wrapper around dev_strategy_csw().
Do some style cleanup in physio().
Requested and reviewed by: kan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
maxbcache size fixed, the auto-tuned transient map is too small for
real-world load on i386.
Tested by: David Wolfskill
Sponsored by: The FreeBSD Foundation
bufobj counter of the writes in progress is incremented. Other thread
inspecting the bufobj would consider it clean.
For the regular vnodes, the vnode lock is typically held both by the
thread performing the bufwrite() and an other thread doing syncing,
which prevents the situation. On the other hand, writes to the VCHR
vnodes are done without holding vnode lock.
Increment the write ref counter for the buffer object before calling
bundirty().
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks
buffer, transparently handling mapped or unmapped buffers. Its intent
is to replace the use of bzero(bp->b_data) in cases where the buffer
might be unmapped, to avoid unneeded upgrades.
Sponsored by: The FreeBSD Foundation
Tested by: pho
do not map the b_pages pages into buffer_map KVA. The use of the
unmapped buffers eliminate the need to perform TLB shootdown for
mapping on the buffer creation and reuse, greatly reducing the amount
of IPIs for shootdown on big-SMP machines and eliminating up to 25-30%
of the system time on i/o intensive workloads.
The unmapped buffer should be explicitely requested by the GB_UNMAPPED
flag by the consumer. For unmapped buffer, no KVA reservation is
performed at all. The consumer might request unmapped buffer which
does have a KVA reserve, to manually map it without recursing into
buffer cache and blocking, with the GB_KVAALLOC flag.
When the mapped buffer is requested and unmapped buffer already
exists, the cache performs an upgrade, possibly reusing the KVA
reservation.
Unmapped buffer is translated into unmapped bio in g_vfs_strategy().
Unmapped bio carry a pointer to the vm_page_t array, offset and length
instead of the data pointer. The provider which processes the bio
should explicitely specify a readiness to accept unmapped bio,
otherwise g_down geom thread performs the transient upgrade of the bio
request by mapping the pages into the new bio_transient_map KVA
submap.
The bio_transient_map submap claims up to 10% of the buffer map, and
the total buffer_map + bio_transient_map KVA usage stays the
same. Still, it could be manually tuned by kern.bio_transient_maxcnt
tunable, in the units of the transient mappings. Eventually, the
bio_transient_map could be removed after all geom classes and drivers
can accept unmapped i/o requests.
Unmapped support can be turned off by the vfs.unmapped_buf_allowed
tunable, disabling which makes the buffer (or cluster) creation
requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped
buffers are only enabled by default on the architectures where
pmap_copy_page() was implemented and tested.
In the rework, filesystem metadata is not the subject to maxbufspace
limit anymore. Since the metadata buffers are always mapped, the
buffers still have to fit into the buffer map, which provides a
reasonable (but practically unreachable) upper bound on it. The
non-metadata buffer allocations, both mapped and unmapped, is
accounted against maxbufspace, as before. Effectively, this means that
the maxbufspace is forced on mapped and unmapped buffers separately.
The pre-patch bufspace limiting code did not worked, because
buffer_map fragmentation does not allow the limit to be reached.
By Jeff Roberson request, the getnewbuf() function was split into
smaller single-purpose functions.
Sponsored by: The FreeBSD Foundation
Discussed with: jeff (previous version)
Tested by: pho, scottl (previous version), jhb, bf
MFC after: 2 weeks
cluster_write() and cluster_wbuild() functions. The flags to be
allowed are a subset of the GB_* flags for getblk().
Sponsored by: The FreeBSD Foundation
Tested by: pho
buffers directly, use pmap_zero_page_area(9) for each zeroing page
region instead.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
intact if getblk() is done on the already owned buffer. Exit from
brelse() early when the lock recursion is detected, otherwise brelse()
might prematurely destroy the buffer under some circumstances.
Sponsored by: The FreeBSD Foundation
Noted by: mckusick
Tested by: pho
MFC after: 2 weeks
write is a disk write request that tells the disk that the buffer
being written must be committed to the media along with any writes
that preceeded it before any future blocks may be written to the drive.
Barrier writes are provided by adding the functions bbarrierwrite
(bwrite with barrier) and babarrierwrite (bawrite with barrier).
Following a bbarrierwrite the client knows that the requested buffer
is on the media. It does not ensure that buffers written before that
buffer are on the media. It only ensure that buffers written before
that buffer will get to the media before any buffers written after
that buffer. A flush command must be sent to the disk to ensure that
all earlier written buffers are on the media.
Reviewed by: kib
Tested by: Peter Holm
When kern_yield() was introduced with the possibility to specify
a new priority, the behaviour changed by not lowering priority at all
in the consumers, making the yielding mechanism highly ineffective for
high priority kthreads like bufdaemon, syncer, vlrudaemon, etc.
There are no evidences that consumers could bear with such change in
semantic and this situation could finally lead to bugs similar to the
ones fixed in r244240.
Re-specify userland pri for kthreads involved.
Tested by: pho
Reviewed by: kib, mdf
MFC after: 1 week
call. The function indicates a failure by the TRUE return value. To
be extra safe, assert that the return value from the following
vm_map_insert() indicates success.
Fix style issues in the nearby lines, reformulate the comment.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
snapshots on UFS filesystems running with journaled soft updates.
This is the first of several bugs that need to be fixed before
removing the restriction added in -r230250 to prevent the use
of snapshots on filesystems running with journaled soft updates.
The deadlock occurs when holding the snapshot lock (snaplk)
and then trying to flush an inode via ffs_update(). We become
blocked by another process trying to flush a different inode
contained in the same inode block that we need. It holds the
inode block for which we are waiting locked. When it tries to
write the inode block, it gets blocked waiting for the our
snaplk when it calls ffs_copyonwrite() to see if the inode
block needs to be copied in our snapshot.
The most obvious place that this deadlock arises is in the
ffs_copyonwrite() routine when it updates critical metadata
in a snapshot and tries to write it out before proceeding.
The fix here is to write the data and indirect block pointer
for the snapshot, but to skip the call to ffs_update() to
write the snapshot inode. To ensure that we will never have
to update a pointer in the inode itself, the ffs_snapshot()
routine that creates the snapshot has to ensure that all the
direct blocks are allocated as part of the creation of the
snapshot.
A less obvious place that this deadlock occurs is when we hold
the snaplk because we are deleting a snapshot. In the course of
doing the deletion, we need to allocate various soft update
dependency structures and allocate some journal space. If we
hit a resource limit while doing this we decrease the resources
in use by flushing out an existing dirty file to get it to give
up the soft dependency resources that it holds. The flush can
cause an ffs_update() to be done on the inode for the file that
we have selected to flush resulting in the same deadlock as
described above when the inode that we have chosen to flush
resides in the same inode block as the snapshot inode that we hold.
The fix is to defer cleaning up any time that the inode on which
we are operating is a snapshot.
Help and review by: Jeff Roberson
Tested by: Peter Holm
MFC (to 9 only) after: 2 weeks
- Axe out the SHOW_BUSYBUFS option and uses a tunable for selectively
enable/disable it, which is defaulted for not printing anything (0
value) but can be changed for printing (1 value) and be verbose (2
value)
- Improves the informations outputed: right now, there is no track of
the actual struct buf object or vnode which are referenced by the
shutdown process, but it is printed the related struct bufobj object
which is not really helpful
- Add more verbosity about the state of the struct buf lock and the
vnode informations, with the latter to be activated separately by the
sysctl
Sponsored by: Sandvine Incorporated
Reviewed by: emaste, kib
Approved by: re (ksmith)
MFC after: 10 days
should not change. Fetch the td_user_pri under the thread lock. This
is probably not necessary but a magic number also seems preferable to
knowing the implementation details here.
Requested by: Jason Behmer < jason DOT behmer AT isilon DOT com >
KASSERT()s and eliminate the rest.
Replace excessive printf()s and a panic() in bufdone_finish() with a
KASSERT() in vm_page_io_finish().
Reviewed by: kib
- entirely eliminate some calls to uio_yeild() as being unnecessary,
such as in a sysctl handler.
- move should_yield() and maybe_yield() to kern_synch.c and move the
prototypes from sys/uio.h to sys/proc.h
- add a slightly more generic kern_yield() that can replace the
functionality of uio_yield().
- replace source uses of uio_yield() with the functional equivalent,
or in some cases do not change the thread priority when switching.
- fix a logic inversion bug in vlrureclaim(), pointed out by bde@.
- instead of using the per-cpu last switched ticks, use a per thread
variable for should_yield(). With PREEMPTION, the only reasonable
use of this is to determine if a lock has been held a long time and
relinquish it. Without PREEMPTION, this is essentially the same as
the per-cpu variable.
consumer of the flag, and it used the flag because OBJ_MIGHTBEDIRTY
was cleared early in vm_object_page_clean, before the cleaning pass
was done. This is no longer true after r216799.
Moreover, since OBJ_CLEANING is a flag, and not the counter, it could
be reset too prematurely when parallel vm_object_page_clean() are
performed.
Reviewed by: alc (as a part of the bigger patch)
MFC after: 1 month (after r216799 is merged)
bufobj lock. If b_bufobj is not NULL, then bufobj lock should be
held when manipulating the flags. Not doing this sometimes leaves
BV_BKGRDINPROG to be erronously set, causing softdep' getdirtybuf() to
stuck indefinitely in "getbuf" sleep, waiting for background write to
finish which is not actually performed.
Add BO_LOCK() in the cases where it was missed.
In collaboration with: pho
Tested by: bz
Reviewed by: jeff
MFC after: 1 month
cdev will never be destroyed. Propagate the flag to devfs vnodes as
VV_ETERNVALDEV. Use the flags to avoid acquiring devmtx and taking a
thread reference on such nodes.
In collaboration with: pho
MFC after: 1 month
machines which can clearly afford the memory.
This is a somewhat conservative version of the patch - more fine tuning may be
necessary.
Idea from: Thread on hackers@
Discussed with: alc
most one call to pmap_qremove(), and thus one TLB shootdown, instead of one
call and TLB shootdown per page.
Simplify the interface to vm_hold_free_pages().
MFC after: 3 weeks
the maintenance of vm_pageout_deficit can be localized to just two places:
vm_page_alloc() and vm_pageout_scan().
This change also corrects an off-by-one error in the maintenance of
vm_pageout_deficit. Historically, the buffer cache functions, allocbuf()
and vm_hold_load_pages(), have not taken into account that vm_page_alloc()
already increments vm_pageout_deficit by one.
Reviewed by: kib
specify the increment of vm_pageout_deficit when sleeping due to page
shortage. Then, in allocbuf(), the code to allocate pages when extending
vmio buffer can be replaced by a call to vm_page_grab().
Suggested and reviewed by: alc
MFC after: 2 weeks
one or more mappings to the bogus page must be replaced, call pmap_qenter()
just once. Previously, pmap_qenter() was called for each mapping to the
bogus page.
MFC after: 3 weeks
per-buf flag to catch if a buf is double-counted in the free count.
This code was useful to debug an instance where a local patch at Isilon
was incorrectly managing numfreebufs for a new buf state.
Reviewed by: jeff
Approved by: zml (mentor)
from the buffer pages to buffer. Combine the code to set buffer
dirty range (previously in vfs_setdirty()) and to clean the pages
(vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now
the vm object lock is acquired only once.
Drain the VPO_BUSY bit of the buffer pages before setting valid
and clean bits in vfs_clean_pages_dirty_buf() with new helper
vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not
busy.
In vfs_busy_pages(), move the wait for draining of VPO_BUSY before
the dirtyness handling, to follow the structure of
vfs_clean_pages_dirty_buf().
Reported and tested by: pho
Suggested and reviewed by: alc
MFC after: 2 weeks
independent code. Move this code into mincore(), and eliminate the
page queues lock from pmap_mincore().
Push down the page queues lock into pmap_clear_modify(),
pmap_clear_reference(), and pmap_is_modified(). Assert that these
functions are never passed an unmanaged page.
Eliminate an inaccurate comment from powerpc/powerpc/mmu_if.m:
Contrary to what the comment says, pmap_mincore() is not simply an
optimization. Without a complete pmap_mincore() implementation,
mincore() cannot return either MINCORE_MODIFIED or MINCORE_REFERENCED
because only the pmap can provide this information.
Eliminate the page queues lock from vfs_setdirty_locked_object(),
vm_pageout_clean(), vm_object_page_collect_flush(), and
vm_object_page_clean(). Generally speaking, these are all accesses
to the page's dirty field, which are synchronized by the containing
vm object's lock.
Reduce the scope of the page queues lock in vm_object_madvise() and
vm_page_dontneed().
Reviewed by: kib (an earlier version)
eliminate it.
Assert that the object containing the page is locked in
vm_page_test_dirty(). Perform some style clean up while I'm here.
Reviewed by: kib
vm_page_try_to_free(). Consequently, push down the page queues lock into
pmap_enter_quick(), pmap_page_wired_mapped(), pmap_remove_all(), and
pmap_remove_write().
Push down the page queues lock into Xen's pmap_page_is_mapped(). (I
overlooked the Xen pmap in r207702.)
Switch to a per-processor counter for the total number of pages cached.
to unconditionally set PG_REFERENCED on a page before sleeping. In many
cases, it's perfectly ok for the page to disappear, i.e., be reclaimed by
the page daemon, before the caller to vm_page_sleep() is reawakened.
Instead, we now explicitly set PG_REFERENCED in those cases where having
the page persist until the caller is awakened is clearly desirable. Note,
however, that setting PG_REFERENCED on the page is still only a hint,
and not a guarantee that the page should persist.
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
brings in support for an optional intent log which eliminates the need
for background fsck on unclean shutdown.
Sponsored by: iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
In r205860 I missed the fact that there is code that strongly assumes
that devvp bo_bsize is equal to underlying provider's sectorsize.
In those places it is hard to obtain the sectorsize in an alternative
way if devvp bo_bsize is set to something else.
So, I am reverting bo_bsize assigment in g_vfs_open.
Instead, in getblk I use DEV_BSIZE block size for b_offset calculation
if vp is a disk vp as reported by vn_isdisk. This should coinside with
vp being a devvp.
Reported by: Mykola Dzham <i@levsha.me>
Tested by: Mykola Dzham <i@levsha.me>
Pointyhat to: avg
MFC after: 2 weeks
X-ToDo: convert bread(devvp) in all fs to use bo_bsize-d blocks
portion of the page that was written. Among other problems, this
page might be picked up by pagedaemon, with failed assertion in
vm_pageout_flush() about validity of the page.
Reported and tested by: pho
Approved by: re (kensmith)
MFC after: 3 weeks
Add support for kernel fault injection using KFAIL_POINT_* macros and
fail_point_* infrastructure. Add example fail point in vfs_bio.c to
simulate VM buf pressure.
Approved by: dfr (mentor)
Provide a more descriptive comment.
Eliminate dead code. The page cannot possibly have PG_ZERO set.
Eliminate unnecessary blank lines.
Reviewed by: tegge
following changes:
Rename vfs_page_set_valid() to vfs_page_set_validclean() to reflect
what this function actually does. Suggested by: tegge
Introduce a new version of vfs_page_set_valid() that does no more than
what the function's name implies. Specifically, it does not update
the page's dirty mask, and thus it does not require the page queues
lock to be held.
Update two of the three callers to the old vfs_page_set_valid() to
call vfs_page_set_validclean() instead because they actually require
the page's dirty mask to be cleared.
Introduce vm_page_set_valid().
Reviewed by: tegge
suffer from the race condition that motivated revision 1.94. Consequently,
the work-around that was implemented by revision 1.94 is no longer needed.
Moreover, reverting this work-around eliminates the need for
vfs_busy_pages() to acquire the page queues lock when preparing a buffer
for read.
Reviewed by: tegge
B_DELWRI cleanup and vnode disassociation should happen just before to
assign the buffer to a queue.
Reported by: miwi, Volker <volker at vwsoft dot com>,
Ben Kaduk <minimarmot at gmail dot com>,
Christopher Mallon <christoph dot mallon at gmx dot de>
Tested by: lulf, miwi
the "nbufkv" sleep.
First, ffs background cg group block write requests a new buffer for
the shadow copy. When ffs_bufwrite() is called from the bufdaemon due
to buffers shortage, requesting the buffer deadlock bufdaemon.
Introduce a new flag for getnewbuf(), GB_NOWAIT_BD, to request getblk
to not block while allocating the buffer, and return failure
instead. Add a flag argument to the geteblk to allow to pass the flags
to getblk(). Do not repeat the getnewbuf() call from geteblk if buffer
allocation failed and either GB_NOWAIT_BD is specified, or geteblk()
is called from bufdaemon (or its helper, see below). In
ffs_bufwrite(), fall back to synchronous cg block write if shadow
block allocation failed.
Since r107847, buffer write assumes that vnode owning the buffer is
locked. The second problem is that buffer cache may accumulate many
buffers belonging to limited number of vnodes. With such workload,
quite often threads that own the mentioned vnodes locks are trying to
read another block from the vnodes, and, due to buffer cache
exhaustion, are asking bufdaemon for help. Bufdaemon is unable to make
any substantial progress because the vnodes are locked.
Allow the threads owning vnode locks to help the bufdaemon by doing
the flush pass over the buffer cache before getnewbuf() is going to
uninterruptible sleep. Move the flushing code from buf_daemon() to new
helper function buf_do_flush(), that is called from getnewbuf(). The
number of buffers flushed by single call to buf_do_flush() from
getnewbuf() is limited by new sysctl vfs.flushbufqtarget. Prevent
recursive calls to buf_do_flush() by marking the bufdaemon and threads
that temporarily help bufdaemon by TDP_BUFNEED flag.
In collaboration with: pho
Reviewed by: tegge (previous version)
Tested by: glebius, yandex ...
MFC after: 3 weeks
address space sizes to be longs instead of ints. Specifically, the follow
values are now longs: runningbufspace, bufspace, maxbufspace,
bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace,
hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a
relatively small number (~ 44000) of buffers set in kern.nbuf would result
in integer overflows resulting either in hangs or bogus values of
hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see
such problems. There was a check for a nbuf setting that would cause
overflows in the auto-tuning of nbuf. I've changed it to always check and
cap nbuf but warn if a user-supplied tunable would cause overflow.
Note that this changes the ABI of several sysctls that are used by things
like top(1), etc., so any MFC would probably require a some gross shims
to allow for that.
MFC after: 1 month
- Align the fifo output in fifo_print() with other vn_printf() output.
- Remove the leading space from lockmgr_printinfo() so its output lines up
in vn_printf().
- lockmgr_printinfo() now ends with a newline, so remove an extra newline
from vn_printf().
In particular following functions KPI results modified:
- bufobj_invalbuf()
- bufsync()
and BO_SYNC() "virtual method" of the buffer objects set.
Main consumers of bufobj functions are affected by this change too and,
in particular, functions which changed their KPI are:
- vinvalbuf()
- g_vfs_close()
Due to the KPI breakage, __FreeBSD_version will be bumped in a later
commit.
As a side note, please consider just temporary the 'curthread' argument
passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP
Reviewed by: kib
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Show the b_dep value for the buffer in the show buffer command.
Add a comand to dump the dirty/clean buffer list for vnode.
Reviewed by: tegge
Tested and used by: pho
MFC after: 1 month
dropped after the call to lockmgr() so just revert this approach using
something similar to the precedent one:
BUF_LOCKWAITERS() just checks if there are waiters (not the actual number
of them) and it is based on newly introduced lockmgr_waiters() which
returns if the lockmgr has waiters or not. The name has been choosen
differently by old lockwaiters() in order to not confuse them.
KPI results enriched by this commit so __FreeBSD_version bumping and
manpage update will be happening soon.
'struct buf' also changes, so kernel ABI is disturbed.
Bug found by: jeff
Approved by: jeff, kib
BO_LOCK/UNLOCK/MTX when manipulating the bufobj.
- Create a new lock in the bufobj to lock bufobj fields independently.
This leaves the vnode interlock as an 'identity' lock while the bufobj
is an io lock. The bufobj lock is ordered before the vnode interlock
and also before the mnt ilock.
- Exploit this new lock order to simplify softdep_check_suspend().
- A few sync related functions are marked with a new XXX to note that
we may not properly interlock against a non-zero bv_cnt when
attempting to sync all vnodes on a mountlist. I do not believe this
race is important. If I'm wrong this will make these locations easier
to find.
Reviewed by: kib (earlier diff)
Tested by: kris, pho (earlier diff)
around the check for the BV_BKGRDINPROG in the brelse() and bqrelse().
See the comment for the explanation why it is safe.
Tested by: pho
Submitted by: jeff
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
than rely on the lockmgr support [1]:
* bump the waiters only if the interlock is held
* let brelvp() return the waiters count
* rely on brelvp() instead than BUF_LOCKWAITERS() in order to check
for the waiters number
- Remove a namespace pollution introduced recently with lockmgr.h
including lock.h by including lock.h directly in the consumers and
making it mandatory for using lockmgr.
- Modify flags accepted by lockinit():
* introduce LK_NOPROFILE which disables lock profiling for the
specified lockmgr
* introduce LK_QUIET which disables ktr tracing for the specified
lockmgr [2]
* disallow LK_SLEEPFAIL and LK_NOWAIT to be passed there so that it
can only be used on a per-instance basis
- Remove BUF_LOCKWAITERS() and lockwaiters() as they are no longer
used
This patch breaks KPI so __FreBSD_version will be bumped and manpages
updated by further commits. Additively, 'struct buf' changes results in
a disturbed ABI also.
[2] Really, currently there is no ktr tracing in the lockmgr, but it
will be added soon.
[1] Submitted by: kib
Tested by: pho, Andrea Barberio <insomniac at slackware dot it>
A couple of notes for this:
* WITNESS support, when enabled, is only used for shared locks in order
to avoid problems with the "disowned" locks
* KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order
to assert for a generic thread (not curthread) owning or not the
lock. Really, this kind of check is bogus but it seems very
widespread in the consumers code. So, for the moment, we cater this
untrusted behaviour, until the consumers are not fixed and the
options could be removed (hopefully during 8.0-CURRENT lifecycle)
* Implementing KA_HELD and KA_UNHELD (not surported natively by
WITNESS) made necessary the introduction of LA_MASKASSERT which
specifies the range for default lock assertion flags
* About other aspects, lockmgr_assert() follows exactly what other
locking primitives offer about this operation.
- Build real assertions for buffer cache locks on the top of
lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp)
paradigm.
- Add checks at lock destruction time and use a cookie for verifying
lock integrity at any operation.
- Redefine BUF_LOCKFREE() in order to not use a direct assert but
let it rely on the aforementioned destruction time check.
KPI results evidently broken, so __FreeBSD_version bumping and
manpage update result necessary and will be committed soon.
Side note: lockmgr_assert() will be used soon in order to implement
real assertions in the vnode namespace replacing the legacy and still
bogus "VOP_ISLOCKED()" way.
Tested by: kris (earlier version)
Reviewed by: jhb
lockmgr lkp, when held in exclusive mode, is recursed
- Introduce the function BUF_RECURSED() which does the same for bufobj
locks based on the top of lockmgr_recursed()
- Introduce the function BUF_ISLOCKED() which works like the counterpart
VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj
BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus
BUF_REFCNT() in a more explicative and SMP-compliant way.
This allows us to axe out BUF_REFCNT() and leaving the function
lockcount() totally unused in our stock kernel. Further commits will
axe lockcount() as well as part of lockmgr() cleanup.
KPI results, obviously, broken so further commits will update manpages
and freebsd version.
Tested by: kris (on UFS and NFS)
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
mounted FS' problems. These are more along the lines of 'avoiding an
avoidable panic' than a complete solution to removable devices. We
now close the barn door after the horse has gotten lose and has been
hit by a truck, as it were. The barn no longer catches fire in this
case, but the horse is still dead :-).
The vfs_bio.c fix causes us not to put a failed write back into the
dirty pool if the error returned was ENXIO. In that case, the buffer
is treated like any other clean buffer that's being retured. ENXIO
means the device isn't there anymore and will never be there again in
the future, so retrying is futile.
The vfs_mount.c fix treats 'ENXIO' as success for unmounting a file
system. If the device is gone, retrying later won't help and we'll
never be able to unmount the device.
These two are part of a larger patch set submitted by the author. The
other patches will be forth coming. I added comments to these two
patches.
Submitted by: Henrik Gulbrandsen
Reviewed by: phk@
PR: usb/46176 (partial)
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
ways:
(1) Cached pages are no longer kept in the object's resident page
splay tree and memq. Instead, they are kept in a separate per-object
splay tree of cached pages. However, access to this new per-object
splay tree is synchronized by the _free_ page queues lock, not to be
confused with the heavily contended page queues lock. Consequently, a
cached page can be reclaimed by vm_page_alloc(9) without acquiring the
object's lock or the page queues lock.
This solves a problem independently reported by tegge@ and Isilon.
Specifically, they observed the page daemon consuming a great deal of
CPU time because of pages bouncing back and forth between the cache
queue (PQ_CACHE) and the inactive queue (PQ_INACTIVE). The source of
this problem turned out to be a deadlock avoidance strategy employed
when selecting a cached page to reclaim in vm_page_select_cache().
However, the root cause was really that reclaiming a cached page
required the acquisition of an object lock while the page queues lock
was already held. Thus, this change addresses the problem at its
root, by eliminating the need to acquire the object's lock.
Moreover, keeping cached pages in the object's primary splay tree and
memq was, in effect, optimizing for the uncommon case. Cached pages
are reclaimed far, far more often than they are reactivated. Instead,
this change makes reclamation cheaper, especially in terms of
synchronization overhead, and reactivation more expensive, because
reactivated pages will have to be reentered into the object's primary
splay tree and memq.
(2) Cached pages are now stored alongside free pages in the physical
memory allocator's buddy queues, increasing the likelihood that large
allocations of contiguous physical memory (i.e., superpages) will
succeed.
Finally, as a result of this change long-standing restrictions on when
and where a cached page can be reclaimed and returned by
vm_page_alloc(9) are eliminated. Specifically, calls to
vm_page_alloc(9) specifying VM_ALLOC_INTERRUPT can now reclaim and
return a formerly cached page. Consequently, a call to malloc(9)
specifying M_NOWAIT is less likely to fail.
Discussed with: many over the course of the summer, including jeff@,
Justin Husted @ Isilon, peter@, tegge@
Tested by: an earlier version by kris@
Approved by: re (kensmith)
td_ru. This removes the requirement for per-process synchronization in
statclock() and mi_switch(). This was previously supported by
sched_lock which is going away. All modifications to rusage are now
done in the context of the owning thread. reads proceed without locks.
- Aggregate exiting threads rusage in thread_exit() such that the exiting
thread's rusage is not lost.
- Provide a new routine, rufetch() to fetch an aggregate of all rusage
structures from all threads in a process. This routine must be used
in any place requiring a rusage from a process prior to it's exit. The
exited process's rusage is still available via p_ru.
- Aggregate tick statistics only on demand via rufetch() or when a thread
exits. Tick statistics are kept in the thread and protected by sched_lock
until it exits.
Initial patch by: attilio
Reviewed by: attilio, bde (some objections), arch (mostly silent)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
a thread is an idle thread, just see if it has the IDLETD
flag set. That flag will probably move to the pflags word
as it's permenent and never chenges for the life of the
system so it doesn't need locking.
file are after snaplock, while other ffs device buffers are before
snaplock in global lock order. By itself, this could cause deadlock
when bdwrite() tries to flush dirty buffers on snapshotted ffs. If,
during the flush, COW activity for snapshot needs to allocate block
and ffs_alloccg() selects the cylinder group that is being written
by bdwrite(), then kernel would panic due to recursive buffer lock
acquision.
Avoid dealing with buffers in bdwrite() that are from other side of
snaplock divisor in the lock order then the buffer being written. Add
new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in
the bdwrite(). Default implementation, bufbdflush(), refactors the code
from bdwrite(). For ffs device buffers, specialized implementation is
used.
Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes)
Tested by: Peter Holm
X-MFC after: 3 weeks (if ever: it changes ABI)
vnode v_flag. For cluster buffers this would result in dereferencing NULL
b_vp. To prevent the panic, cache relevant vnode flag before calling
bstrategy.
Reported by: Peter Holm, kris
Tested by: Peter Holm
Reviewed by: tegge
Pointy hat to: kib
by vnode. Allow for md thread and the thread that owns lock on vnode
backing the md device to do the write even when runningbufspace is
exhausted.
Tested by: Peter Holm
Reviewed by: tegge
MFC after: 2 weeks
Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of
vfs_setdirty(), thereby eliminating a second acquisition and release
of the same vm object lock.
queues lock to BIO_READ operations. Recent changes to the implementation
of the per-page flags have eliminated the need for the page queues lock
in the other cases.
synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
requires Giant. It is set in bgetvp and cleared in brelvp.
- Create QUEUE_DIRTY_GIANT for dirty buffers that require giant.
- In the buf daemon, only grab giant when processing QUEUE_DIRTY_GIANT and
only if we think there are buffers in that queue.
Sponsored by: Isilon Systems, Inc.
the system when brelse() was called with B_RELBUF set on the buffer. This
could be a problem when the system was low on memory, had many buffers on
QUEUE_EMPTYKVA and started to traverse directories. For each getnewbuf(),
pages were allocated from the system, driving the free reserve downwards.
For each brelse(), the system put the buffer on QUEUE_CLEAN, with B_INVAL
set.
This commit changes the semantics of B_RELBUF to also free pages from
non-VMIO buffers.
Reviewed by: alc
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
Add a new private thread flag to indicate that the thread should
not sleep if runningbufspace is too large.
Set this flag on the bufdaemon and syncer threads so that they skip
the waitrunningbufspace() call in bufwrite() rather than than
checking the proc pointer vs. the known proc pointers for these two
threads. A way of preventing these threads from being starved for
I/O but still placing limits on their outstanding I/O would be
desirable.
Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from
blocking on the runningbufspace check while holding snaplk. This
prevents snaplk from being held for an arbitrarily long period of
time if runningbufspace is high and greatly reduces the contention
for snaplk. The disadvantage is that ffs_copyonwrite() can start
a large amount of I/O if there are a large number of snapshots,
which could cause a deadlock in other parts of the code.
Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace
before attempting to grab snaplk so that I/O requests waiting on
snaplk are not counted in runningbufspace as being in-progress.
Increment runningbufspace again before actually launching the
original I/O request.
Prior to the above two changes, the system could deadlock if enough
I/O requests were blocked by snaplk to prevent runningbufspace from
falling below lorunningspace and one of the bawrite() calls in
ffs_copyonwrite() blocked in waitrunningbufspace() while holding
snaplk.
See <http://www.holm.cc/stress/log/cons143.html>
bio may have been freed and reassigned by the wakeup before being
tested after releasing the bdonelock.
There's a non-zero chance this is the cause of a few of the crashes
knocking around with biodone() sitting in the stack backtrace.
Reviewed By: phk@
make the b_iodone callback responsible for setting it if it is needed.
Previously, it was set unconditionally by bufdone() without holding
whichever lock is shared by the b_iodone callback and the corresponding
top-half function. Consequently, in a race, the top-half function could
conclude that operation was done before the b_iodone callback finished.
See, for example, aio_physwakeup() and aio_fphysio().
Note: I don't believe that the other, more widely-used b_iodone callbacks
are affected.
Discussed with: jeff
Reviewed by: phk
MFC after: 2 weeks
atomic write request, it can fill the buffer cache with the entirety
of that write in order to handle retries. However, it never drops
the vnode lock, or else it wouldn't be atomic, so it ends up waiting
indefinitely for more buf memory that cannot be gotten as it has it
all, and it waits in an uncancellable state.
To fix this, hibufspace is exported and scaled to a reasonable
fraction. This is used as the limit of how much of an atomic write
request by the NFS client will be handled asynchronously. If the
request is larger than this, it will be turned into a synchronous
request which won't deadlock the system. It's possible this value is
far off from what is required by some, so it shall be tunable as soon
as mount_nfs(8) learns of the new field.
The slowdown between an asynchronous and a synchronous write on NFS
appears to be on the order of 2x-4x.
General nod by: gad
MFC after: 2 weeks
More testing: wes
PR: kern/79208
milliseconds due to what is essentially n^2 algorithmic complexity. This
change makes the algorithm N*2 instead. This heavy processing manifested
itself as skipping in audio and video playback due to the long scheduling
latencies and contention on giant by pcm.
- flushbufqueues() is now responsible for flushing multiple buffers
rather than one at a time. This allows us to save our progress in the
list by using a sentinal. We must do the numdirtywakeup() and
waitrunningbufspace() here now rather than in buf_daemon().
- Also add a uio_yield() after we have processed the list once for bufs
without deps and again for bufs with deps. This is to release Giant
and allow any other giant locked code to proceed.
Tested by: Many users on current@
Revealed by: schedgraph traces sent by Emil Mikulic & Anthony Ginepro
Give FFS vnodes a specific bufwrite method which contains all the
background write stuff and then calls into the default bufwrite()
for the rest of the job.
Remove all the background write related stuff from the normal bufwrite.
This drags the softdep_move_dependencies() back into FFS.
Long term, it is worth looking at simply copying the data into
allocated memory and issuing the bio directly and not create the
"shadow buf" in the first place (just like copy-on-write is done
in snapshots for instance). I don't think we really gain anything
but complexity from doing this with a buf.
- Remove some KASSERTs which are invalid if the appropriate lock is
not held.
- Slightly restructure bremfree() so that it is more sane.
- Change the flush code in bdwrite() to avoid acquiring a mutex
whenever possible.
- Change the flush code in bdwrite() to avoid holding the bufobj mutex
while calling buf_countdeps(). This introduces a lock-order
relationship with the softdep lock that can not otherwise be resolved.
- Don't set B_DONE until bufdone() is complete, otherwise another
processor may believe the buf is done before it is.
- Only acquire Giant if the caller has set b_iodone. Don't grab giant
around normal bufdone() calls.
Sponsored By: Isilon Systems, Inc.
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
setting the B_REMFREE flag in the buf. This is done to prevent lock order
reversals with code that must call bremfree() with a local lock held.
This also reduces overhead by removing two lock operations per buf for
fsync() and similar.
- Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock
has been acquired so that we may remove ourself from the free-list.
- Provide a bremfreef() function to immediately remove a buf from a
free-list for use only by NFS. This is done because the nfsclient code
overloads the b_freelist queue for its own async. io queue.
- Simplify the numfreebuffers accounting by removing a switch statement
that executed the same code in every possible case.
- getnewbuf() can encounter locked bufs on free-lists once Giant is removed.
Remove a panic associated with this condition and delay asserts that
inspect the buf until after it is locked.
Reviewed by: phk
Sponsored by: Isilon Systems, Inc.
need for most calls to vm_page_busy(). Specifically, most calls to
vm_page_busy() occur immediately prior to a call to vm_page_remove().
In such cases, the containing vm object is locked across both calls.
Consequently, the setting of the vm page's PG_BUSY flag is not even
visible to other threads that are following the synchronization
protocol.
This change (1) eliminates the calls to vm_page_busy() that
immediately precede a call to vm_page_remove() or functions, such as
vm_page_free() and vm_page_rename(), that call it and (2) relaxes the
requirement in vm_page_remove() that the vm page's PG_BUSY flag is
set. Now, the vm page's PG_BUSY flag is set only when the vm object
lock is released while the vm page is still in transition. Typically,
this is when it is undergoing I/O.
buf->b-dev.
Put a bio between the buf passed to dev_strategy() and the device driver
strategy routine in order to not clobber fields in the buf.
Assert copyright on vfs_bio.c and update copyright message to canonical
text. There is no legal difference between John Dysons two-clause
abbreviated BSD license and the canonical text.
Give ffs it's own bufobj->bo_ops vector and create a private strategy
routine, (currently misnamed for forwards compatibility), which is
just a copy of the generic bufstrategy routine except we call
softdep_disk_prewrite() directly instead of through the buf_prewrite()
indirection.
Teach UFS about the need for softdep_disk_prewrite() and call the
function directly in FFS.
Remove buf_prewrite() from the default bufstrategy() and from the
global bio_ops method vector.
We keep si_bsize_phys around for now as that is the simplest way to pull
the number out of disk device drivers in devfs_open(). The correct solution
would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth
when filesystems sit on GEOM, so don't bother for now.
and release of the global page queues lock required to make the call.
Remove GIANT_REQUIRED from vm_hold_free_pages(). All of its VM operations
are properly synchronized.
Extend it with a strategy method.
Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY
song and dance.
Rename ibwrite to bufwrite().
Move the two NFS buf_ops to more sensible places, add bufstrategy
to them.
Add inlines for bwrite() and bstrategy() which calls through
buf->b_bufobj->b_ops->b_{write,strategy}().
Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
Initialize b_bufobj for all buffers.
Make incore() and gbincore() take a bufobj instead of a vnode.
Make inmem() local to vfs_bio.c
Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj)
also VI_MTX() to BO_MTX(),
Make buf_vlist_add() take a bufobj instead of a vnode.
Eliminate other uses of bp->b_vp where bp->b_bufobj will do.
Various minor polishing: remove "register", turn panic into KASSERT,
use new function declarations, TAILQ_FOREACH_SAFE() etc.
Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write
count on a bufobj. Bufobj_wdrop() replaces vwakeup().
Use these functions all relevant places except in ffs_softdep.c where
the use if interlocked_sleep() makes this impossible.
Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
of the number of threads which are inside whatever is behind the
cdevsw for this particular cdev.
Make the device mutex visible through dev_lock() and dev_unlock().
We may want finer granularity later.
Replace spechash_mtx use with dev_lock()/dev_unlock().
preparation for integration of p4::phk_bufwork. In the future,
local filesystems will talk to GEOM directly and they will consequently
be able to issue BIO_DELETE directly. Since the removal of the fla
driver, BIO_DELETE has effectively been a no-op anyway.
When avoiding the zeroing of "bogus_page" when it appears in a buf,
be sure to advance the pointers into the data for successive pages.
The bug caused file corruption when read(2)ing from a "hole" in a
file where a previous page of the read block had already been faulted
in: fsx tripped up on this pretty quickly. The particular access
pattern is probably pretty unusual, so other applications probably
wouldn't have had problems, but you'd never know.
Reviewed By: alc@
around in the vnodes surroundings when we allocate a block.
Assign a blocksize when we create a vnode, and yell a warning (and ignore it)
if we got the wrong size.
Please email all such warnings to me.
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
allocation and deallocation. This flag's principal use is shortly after
allocation. For such cases, clearing the flag is pointless. The only
unusual use of PG_ZERO is in vfs_bio_clrbuf(). However, allocbuf() never
requests a prezeroed page. So, vfs_bio_clrbuf() never sees a prezeroed
page.
Reviewed by: tegge@
silences an annoying warning in getblk() when VMIO'ing on a directory
vnode, which can happen when vfs.vmiodirenable is 1.
Bring the warning message in line with reality at the same time.
Submitted by: hmp
were a rather overwhelming task. I soon learned that if you don't know
where you're going to store something, at least try to pile it next to
something slightly related in the hope that a pattern emerges.
Apply the same principle to the ffs/snapshot/softupdates code which have
leaked into specfs: Add yet a buf-quasi-method and call it from the
only two places I can see it can make a difference and implement the
magic in ffs_softdep.c where it belongs.
It's not pretty, but at least it's one less layer violated.
This is what we came here for: Hang dev_t's from their cdevsw,
refcount cdevsw and dev_t and generally keep track of things a lot
better than we used to:
Hold a cdevsw reference around all entrances into the device driver,
this will be necessary to safely determine when we can unload driver
code.
Hold a dev_t reference while the device is open.
KASSERT that we do not enter the driver on a non-referenced dev_t.
Remove old D_NAG code, anonymous dev_t's are not a problem now.
When destroy_dev() is called on a referenced dev_t, move it to
dead_cdevsw's list. When the refcount drops, free it.
Check that cdevsw->d_version is correct. If not, set all methods
to the dead_*() methods to prevent entrance into driver. Print
warning on console to this effect. The device driver may still
explode if it is also incompatible with newbus, but in that case
we probably didn't get this far in the first place.
accurate reporting of multi-terabyte filesystem sizes.
You should build and boot a new kernel BEFORE doing a `make world'
as the new kernel will know about binaries using the old statfs
structure, but an old kernel will not know about the new system
calls that support the new statfs structure. Running an old kernel
after a `make world' will cause programs such as `df' that do a
statfs system call to fail with a bad system call.
Reviewed by: Bruce Evans <bde@zeta.org.au>
Reviewed by: Tim Robbins <tjr@freebsd.org>
Reviewed by: Julian Elischer <julian@elischer.org>
Reviewed by: the hoards of <arch@freebsd.org>
Sponsored by: DARPA & NAI Labs.
consistency initialized. Consequently, a number of conditionals that
checked the validity of b_object before passing it to VM_OBJECT_LOCK()
and VM_OBJECT_UNLOCK() are no longer needed.
waitrunningbufspace() calls so that they are always able to
proceed and clean up buffer space.
Submitted by: Brian Fundakowski Feldman <green@freebsd.org>
the point where it being a macro is no longer sensible, and it will
only be more so in days to come.
BIO_STRATEGY() is now only used from DEV_STRATEGY() and should not
be used directly anymore.
Put the contents of both in the new function dev_strategy() and
make DEV_STRATEGY() call that function.
In addition, this allows us to make the rather magic bufdonebio()
helper function static.
This alse saves hunderedandsome bytes of code in a typical kernel.
caused snapshot related problems.
- The vp can not be NULL here or we would panic in vfs_bio_awrite(). Stop
confusing the logic by checking for it in several places.
Submitted by: kirk and then rototilled by me to remove vp == NULL checks.
freed belong to the kernel object.)
- Increase the granularity of the vm object locking in vm_hold_load_pages()
in order to reduce the number of times that we acquire and release the
same lock.
pmap_extract_and_hold(). Note, however, that GIANT_REQUIRED should not be
removed until all platforms fully implement the "prot" parameter to
pmap_extract_and_hold().
Reviewed by: tegge
bail out if the buffer is not already present.
- The buffer returned by incore() is not locked and should not be sent to
brelse(). Use getblk() with the new GB_NOCREAT flag to preserve the
desired semantics.
- Surround all accesses of the BKGRD{WAIT,INPROG} flags with the vnode
interlock.
- Don't use the B_LOCKED flag and QUEUE_LOCKED for background write
buffers. Check for the BKGRDINPROG flag before recycling or throwing
away a buffer. We do this instead because it is not safe for us to move
the original buffer to a new queue from the callback on the background
write buffer.
- Remove the B_LOCKED flag and the locked buffer queue. They are no longer
used.
- The vnode interlock is used around checks for BKGRDINPROG where it may
not be strictly necessary. If we hold the buf lock the a back-ground
write will not be started without our knowledge, one may only be
completed while we're not looking. Rather than remove the code, Document
two of the places where this extra locking is done. A pass should be
done to verify and minimize the locking later.
