remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
_rtld_debug_postinit(). [1]
- Use __compiler_membar() instead of inline asm in _r_debug_state() and
_r_debug_postinit(). [2]
Pointy hat to: markj [1]
Reported by: attilio [2]
Discussed with: kib
X-MFC-With: r265456
the victim process before its entry point is called, at which point probes
and DOF data are registered with the kernel. The r_debug_state hook cannot
be used for this purpose, as it is called before the program's init routines
are invoked and in particular before DOF data is registered (via drti.o).
Reviewed by: kib
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
first calls mmap() with the arguments PROT_NONE and MAP_ANON to reserve a
single, contiguous range of virtual addresses for the entire shared library.
Later, rtld calls mmap() with the the shared library's file descriptor
and the argument MAP_FIXED to place the text and data sections within the
reserved range. The rationale for mapping shared libraries in this way is
explained in the commit message for Revision 190885. However, this approach
does have an unintended, negative consequence. Since the first call to
mmap() specifies MAP_ANON and not the shared library's file descriptor, the
kernel has no idea what alignment the vm object backing the file prefers.
As a result, the reserved range's alignment is unlikely to be the same as
the vm object's, and so mapping with superpages becomes impossible. To
address this problem, this revision adds the argument MAP_ALIGNED_SUPER to
the first call to mmap() if the text section is larger than the smallest
superpage size.
To determine if the text section is larger than the smallest superpage
size, rtld must always fetch the page size information. As a result, the
private code for fetching the base page size in rtld's builtin malloc is
redundant. Eliminate it. Requested by: kib
Tested by: zbb (on arm)
Reviewed by: kib (an earlier version)
Discussed with: jhb
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
as possible. This does not change the wording in any way.
Remove the 3rd clause ("advertising clause") of the BSD license as
permitted by the University of Berkeley on July 22, 1999. While the
clause itself mentions Lawrence Berkeley Laboratory, UCB is the sole
copyright holder of this file.
Reviewed by: imp, emaste, eadler
MFC after: 2 weeks
Some modules do not align data at least to size of pointer, they uses a
smaller alignment, but our pointer should be aligned to its native
boundary, otherwise on some platforms, hardware alignment checking
will cause bus error.
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
saving the pointer will overwrite bytes belongs to another memory block
unexpectly, to fix the problem, use (allocated address + sizeof(void *)) as
initial value, and slip to next aligned address, so maximum extra bytes is
sizeof(void *) + align - 1.
Tested by: Andre Albsmeier < mail at ma17 dot ata dot myota dot orgndre >
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
the max required alignment for the static tls segments, and honor it
when carving the pieces for next module, from the static space. Use
aligned allocator to get properly-aligned dynamic blocks.
Reported by: dt71@gmx.com
Reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
used by auditing tools to determine the userland patch level when it
differs from what `uname -r` reports. This can happen when the system
is kept up-to-date using freebsd-update and the last SA did not touch
the kernel, or when a new kernel has been installed but the system has
not yet rebooted.
Approved by: re (glebius)
On MIPS the .dynamic section is read-only, so the pointer to rtld
information for debuggers cannot be stored there (in DT_DEBUG).
Instead, a special section .rld_map is used.
Sponsored by: DARPA, AFRL
Approved by: re (delphij)
available in 32-bit compatibility mode, unconditional.
Overhaul the man page, which had evolved more by accretion than by design.
Approved by: re (gjb)
MFC after: 3 weeks
PATH_MAX after the token substitution. This is wrong, because
origin_subst_one() performs the substitution on the whole rpath and
similar strings, which contain several pathes separated by colon. As
result, long (but correct) rpath consisting of many path elements is
rejected by the function.
Correct the problem by rewriting the origin_subst_one() to perform two
passes, first pass to calculate the number of substitutions to be
performed, and second pass to generate the resulting string. Second
pass allocates the memory for the result based on the count from the
first pass, without enforcing a limit.
Reported and tested by: pgj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Normal libraries have base address 0 and are unaffected by this change.
PR: 176216
Submitted by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: kib
MFC after: 1 week
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
instead of /libexec/ld-elf.so.1. Below in the Makefile we execute
'chflags noschg ${DESTDIR}/usr/libexec/ld-elf.so.1', which follows
symlink and removes 'schg' flag from system's /libexec/ld-elf.so.1
instead of the one in DESTDIR. It is also more friendly to use
replative paths in symlink in case of jail/chroot environments.
Obtained from: WHEEL Systems
MFC after: 2 weeks
Rtld did not set FD_CLOEXEC on its internal file descriptors; therefore,
such a file descriptor may be passed to a process created by another thread
running in parallel to dlopen() or fdlopen().
No other threads are expected to be running during parsing of the hints
and libmap files but the file descriptors need not be passed to child
processes so add O_CLOEXEC there as well.
This change will break fdlopen() (as used by OpenPAM) on kernels without
F_DUPFD_CLOEXEC (added in July). Note that running new userland on old
kernels is not supported.
Reviewed by: kib
Previously atrun refused to run jobs if load average was not below fixed limit of 1.5.
PR: 173175
Reviewed by: peterj
Approved by: trasz (mentor)
MFC after: 2 weeks
current version of FreeBSD, this isn't guarenteed by the API.
Custom security modules, or future implementations of the setuid and
setgid may fail.
Submitted by: Erik Cederstrand
Approved by: cperciva
MFC after: 3 days
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
In addition to adding missing `static' keywords:
- bin/dd: Pull in `extern.h' to guarantee consistency with source file.
- libexec/rpc.rusersd: Move shared globals into an extern.h.
- libexec/talkd: Move `debug' and `hostname' into extern.h.
- usr.bin/cksum: Put counters in extern.h, as they are used by ckdist/mtree.
- usr.bin/m4: Move `end_result' into extern.h.
- usr.sbin/services_mkdb: Move shared globals into an extern.h.
In addition to adding `static' where possible:
- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
The reserved space for fmt was exactly sufficient for a two-digit value of
MAXLOGNAME - 1.
PR: bin/171815
Submitted by: Jeremy Huddleston Sequoia
MFC after: 1 week
all in one command, with no permissions race.
2. Simplify the rotation logic by cd'ing into the directory, with a test
to make sure that it succeeds.
3. Remove any files numbered higher than entropy_save_num. This helps when
the user reduces the number, and may be useful for other purposes down
the road.
4. Simplify the rotation logic by first testing the common case (it's a
regular file) then testing if something else exists with the same name
using elif. Also switch from using jot to simpler countdown format.
5. Fix logger lines and error messages to be more consistent, and wrap the
code more consistently in the 80 column range. The "not a regular file"
error message was mistakenly wrapped entirely in "quotes" which caused
logger to include line-wrapping whitespace. Change that to wrap only
the variables in quotes, which is both consistent and works better.
6. Update copyright to reflect the fact that changes were made this year.
Parts of 2-4 were taken from etc/periodic/daily/310.accounting
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
The place where the function is called can be reached if object loading
and relocation fails too, in which case obj pointer will be NULL. Do not
call process_nodelete then, or crash will follow.
Pointy hat to: kan
Trying to up the reference from the load loop risks missing dependencies
that have not been loaded yet.
MFC afer: 1 week
Reported by: nox
Reviewd by: kib
This is not strictly required with the current ABI but will be when we
switch to the ARM EABI. The aapcs requires the stack to be 4 byte aligned
at all times and 8 byte aligned when calling a public subroutine where the
current ABI only requires sp to be a multiple of 4.
by John Marino <draco@marino.st>, with the following (edited) commit
message
Date: Sat, 24 Mar 2012 06:40:50 +0100
Subject: [PATCH 1/1] rtld: Implement DT_RUNPATH and -z nodefaultlib
DT_RUNPATH is incorrectly being considered as an alias of DT_RPATH. The
purpose of DT_RUNPATH is to have two different types of rpath: one that
can be overridden by the environment variable LD_LIBRARY_PATH and one that
can't. With the currently implementation, LD_LIBRARY_PATH will always
trump any embedded rpath or runpath tags.
Current path search order by rtld:
==================================
LD_LIBRARY_PATH
DT_RPATH / DT_RUNPATH (always the same)
ldconfig hints file (default: /var/run/ld-elf.so.hints)
/usr/lib
New path search order by rtld:
==============================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file
/usr/lib
The new path search matches how the linux runtime loader works. The other
major added feature is support for linker flag "-z nodefaultlib". When
this flag is passed to the linker, rtld will skip all references to the
standard library search path ("/usr/lib" in this case but it could handle
more color delimited paths) except in DT_RPATH and DT_RUNPATH.
New path search order by rtld with -z nodefaultlib flag set:
============================================================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file (skips all references to /usr/lib)
FreeBSD notes:
- we fixed some bugs which were submitted to DragonFly and merged there
as commit 1ff8a2bd3eb6e5587174c6a983303ea3a79e0002;
- we added LD_LIBRARY_PATH_RPATH environment variable to switch to
the previous behaviour of considering DT_RPATH a synonym for DT_RUNPATH;
- the FreeBSD default search path is /lib:/usr/lib and not /usr/lib.
Reviewed by: kan
MFC after: 1 month
MFC note: flip the ld_library_path_rpath default value for stable/9
relocations are performed before the object's initializer is called.
When dlopen()ing an object, relocate the whole DAG rooted in the
object instead of only relocating the object itself and list of newly
loaded dependencies.
Reversed sequence currently can occur if the same object is a
dependency for both filtee and filter, since filtees are loaded
typically during the relocation processing, when some filter
dependencies might be already loaded but not relocated yet.
Reported and tested by: swills
Reviewed by: kan
MFC after: 1 week
object, and eliminate the pread(2) call as well [1]. Mmap the first
page of the object temporaly, and unmap it on error or last use.
Potentially, this leaves one-page gap between succeeding dlopen(3),
but there are other mmap(2) consumers as well.
Fix several cases were the whole mapping of the object leaked on error.
Use MAP_PREFAULT_READ for mmap(2) calls which map real object pages [2].
Insipired by the patch by: Ian Lepore <freebsd damnhippie dyndns org> [1]
Suggested by: alc [2]
MFC after: 2 weeks
object for which digest_dynamic1() was not done yet. Just return
EINVAL and do not try to dereference NULL buckets hash array.
This seems to happen on ia64 for rtld object itself, where the
R_IA_64_FPTR64LSB relocations require symbol lookup. The dynamic
linker itself does not rely on identity of the C-level function
pointers (i.e. function descriptors).
Reported and reviewed by: marcel
MFC after: 8 days
include <file>:
Parse the contents of file before continuing with the current file.
includedir <dir>:
Parse the contents of every file in dir that ends in .conf before continuing
with the current file.
Any file or directory encountered while processing include or includedir
directives will be parsed exactly once, even if it is encountered multiple
times.
Reviewed by: kib, des
Approved by: des (mentor)
MFC after: 1 month
hash elements, and a helper matched_symbol() which match the given hash
entry and request, performing needed type and version checks.
Based on dragonflybsd support for GNU hash by John Marino <draco marino st>
Reviewed by: kan
Tested by: bapt
MFC after: 2 weeks
When multiple users share the same UID, the old code will simply pick an
arbitrary username to attach to the utmpx entries. Make the code a bit
more accurate by first checking whether getlogin() returns a username
which corresponds to the uid of the calling process. If this fails,
simply fall back to picking an arbitrary username.
Reported by: saurik on GitHub
MFC after: 2 weeks
through the filter loading call chain. This fixes attempts to
write-lock the already locked rtld_bind_lock when filter loading is
initiated by relocation of dlopening dso.
Reported and tested by: Taku YAMAMOTO <taku tackymt homeip net>
MFC after: 1 week
for the same object. This can happen when object is a dependency of the
dlopen()ed dso. When called several times, we waste time due to unneeded
processing, and memory, because obj->vertab is allocated anew on each
iteration.
Reviewed by: kan
MFC after: 2 weeks
are assumed to not fail.
Make the xcalloc() calling conventions follow the calloc(3) calling
conventions and replace unchecked calls to calloc() with calls to
xcalloc().
Remove redundand declarations from xmalloc.c, which are already
present in rtld.h.
Reviewed by: kan
Discussed with: bde
MFC after: 2 weeks
Do not relocate twice an object which happens to be needed by loaded
binary (or dso) and some filtee opened due to symbol resolution when
relocating need objects. Record the state of the relocation
processing in Obj_Entry and short-circuit relocate_objects() if
current object already processed.
Do not call constructors for filtees loaded during the early
relocation processing before image is initialized enough to run
user-provided code. Filtees are loaded using dlopen_object(), which
normally performs relocation and initialization. If filtee is
lazy-loaded during the relocation of dso needed by the main object,
dlopen_object() runs too earlier, when most runtime services are not
yet ready.
Postpone the constructors call to the time when main binary and
depended libraries constructors are run, passing the new flag
RTLD_LO_EARLY to dlopen_object(). Symbol lookups callers inform
symlook_* functions about early stage of initialization with
SYMLOOK_EARLY. Pass flags through all functions participating in
object relocation.
Use the opportunity and fix flags argument to find_symdef() in
arch-specific reloc.c to use proper name SYMLOOK_IN_PLT instead of
true, which happen to have the same numeric value.
Reported and tested by: theraven
Reviewed by: kan
MFC after: 2 weeks
Stop using strerror(3) in rtld, which brings in msgcat and stdio.
Directly access sys_errlist array of errno messages with private
rtld_strerror() function.
Now,
$ size /libexec/ld-elf.so.1
text data bss dec hex filename
96983 2480 8744 108207 1a6af /libexec/ld-elf.so.1
Reviewed by: dim, kan
MFC after: 2 weeks
Provide rtld-private implementations of __stack_chk_guard,
__stack_chk_fail() and __chk_fail() symbols, to be used by functions
linked from libc_pic.a. This avoids use of libc stack_protector.c,
which pulls in syslog(3) and stdio as dependency.
Also, do initialize rtld-private copy __stack_chk_guard, previously
libc-provided one was not initialized, since we do not call rtld
object _init() methods.
Reviewed by: kan
MFC after: 3 weeks
yet, and object segments are not yet mapped. Only parse the notes that
appear in the first page of the dso (as it should be anyway), and use
the preloaded page content.
Reported and tested by: stass
MFC after: 20 days
particular on ARM, do require working init arrays.
Traditional FreeBSD crt1 calls _init and _fini of the binary, instead
of allowing runtime linker to arrange the calls. This was probably
done to have the same crt code serve both statically and dynamically
linked binaries. Since ABI mandates that first is called preinit
array functions, then init, and then init array functions, the init
have to be called from rtld now.
To provide binary compatibility to old FreeBSD crt1, which calls _init
itself, rtld only calls intializers and finalizers for main binary if
binary has a note indicating that new crt was used for linking. Add
parsing of ELF notes to rtld, and cache p_osrel value since we parsed
it anyway.
The patch is inspired by init_array support for DragonflyBSD, written
by John Marino.
Reviewed by: kan
Tested by: andrew (arm, previous version), flo (sparc64, previous version)
MFC after: 3 weeks
for TLS microbenchmark using global-dynamic TLS model on amd64 (which is
default for PIC dso objects).
Split the slow path into tls_get_addr_slow(), for which inlining is
disabled. This prevents the registers spill on tls_get_addr_common()
entry.
Provide static branch hint to the compiler, indicating that slow path
is not likely to be taken.
While there, do some minimal style adjustments.
Reported and tested by: davidxu
MFC after: 1 week
Since after r232498 the ctype macros require working access to
thread-local variables, rtld crashes when libmap.conf is present.
Use hand-made isspace1() macro which is enough to detect spaces in
libmap.conf.
Reported by: alc, lme, many on current@
Tested by: lme
Reviewed by: dim, kan
MFC after: 1 week
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.
Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang (disables -Werror)
- NO_WCAST_ALIGN.clang (disables -Wcast-align)
- NO_WFORMAT.clang (disables -Wformat and friends)
- CLANG_NO_IAS (disables integrated assembler)
- CLANG_OPT_SMALL (adds flags for extra small size optimizations)
As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf! For clang, use the following:
CC=clang
CXX=clang++
CPP=clang-cpp
MFC after: 2 weeks
A number of tftp clients, including the one in Intel's pxe boot loader,
may intentionally stop a transfer using error code 0 (i.e., EUNDEF).
These are not real errors. Avoid spamming log files with these by
logging them at level LOG_DEBUG instead.
Discussed on -hackers with an initial patch proposal; this change is an
improved approach suggested by kan@.
relocations until tls is initialized and stacks permissions correctly
set. This allows the ifunc to call malloc(3) and some other heavy
services.
Add debug banner.
MFC after: 3 days
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
Add an API for alerting internal libc routines to the presence of
"unsafe" paths post-chroot, and use it in ftpd. [11:07]
Fix a buffer overflow in telnetd. [11:08]
Make pam_ssh ignore unpassphrased keys unless the "nullok" option is
specified. [11:09]
Add sanity checking of service names in pam_start. [11:10]
Approved by: so (cperciva)
Approved by: re (bz)
Security: FreeBSD-SA-11:06.bind
Security: FreeBSD-SA-11:07.chroot
Security: FreeBSD-SA-11:08.telnetd
Security: FreeBSD-SA-11:09.pam_ssh
Security: FreeBSD-SA-11:10.pam
messy way, so as to not disrupt other yp programs: just add casts to
convert the incompatible enums, as the numerical values are the same
(either by accident, design, or the phase of the moon at that time).
MFC after: 1 week
from the dispatcher would also acquire bind lock in read mode, which
is the supported operation. plt is explicitely designed to allow safe
multithreaded updates, so the shared lock do not cause problems.
The error in r228435 is that it allows read lock acquisition after the
write lock for the bind block. If we dlopened the shared object that
contains IRELATIVE or jump slot which target is STT_GNU_IFUNC, then
possible recursive plt resolve from the dispatcher would cause it.
Postpone the resolution for irelative/ifunc right before initializers
are called, and drop bind lock around calls to dispatcher. Use
initlist to iterate over the objects instead of the ->next, due to
drop of the bind lock in iteration.
For i386/reloc.c:reloc_iresolve(), fix calculation of the dispatch
function address for dso, by taking into account possible non-zero
relocbase.
MFC after: 3 weeks
rtld on 386 and amd64. This adds runtime bits neccessary for the use
of the dispatch functions from the dynamically-linked executables and
shared libraries.
To allow use of external references from the dispatch function, resolution
of the R_MACHINE_IRESOLVE relocations in PLT is postponed until GOT entries
for PLT are prepared, and normal resolution of the GOT entries is finished.
Similar to how it is done by GNU, IRELATIVE relocations are resolved in
advance, instead of normal lazy handling for PLT.
Move the init_pltgot() call before the relocations for the object are
processed.
MFC after: 3 weeks
relocations are processed, since tls initialization section might be
itself subject for relocations. Only set up of the block is postponed,
the tls block offsets are allocated before relocation processing, since
TLS-related relocations may need offsets ready.
Reported by: ale
PR: threads/161344
Reviewed by: kan
MFC after: 1 week
executable) after r190885. The whole region for the dso is mmaped with
MAP_NOCORE flag, doing only mprotect(2) over .bss prevented it from
writing .bss to core files.
Revert the optimization of using mprotect(2) to establish .bss, overlap
the section with mmap(2).
Reported by: attilio
Reviewed by: attilio, emaste
Approved by: re (bz)
MFC after: 2 weeks
functions. The _rtld_error() function might be called early during the rtld
bootstrap, in which case function pointers are not yet functional on ia64
due to required relocations not yet performed.
Reported, reviewed and tested by: marcel
Approved by: re (bz)
function (a hook necessary for gdb support), is inlined, but since the
function contains no code, no calls to it are generated. When gdb is
debugging a dynamically linked program, this causes backtraces to be
corrupted.
Fix it by marking the function __noinline, and inserting an empty asm
statement, that pretends to clobber memory. This forces the compiler to
emit calls to r_debug_state() throughout rtld.c.
Approved by: re (kib)
C runtime services, like printf(). Unfortunately, the multithread-safeness
measures in the libc do not work in rtld environment.
Rip the kernel printf() implementation and use it in the rtld instead of
libc version. This printf does not require any shared global data and thus
is mt-safe. Systematically use rtld_printf() and related functions, remove
the calls to err(3).
Note that stdio is still pulled from libc due to libmap implementaion using
fopen(). This is safe but unoptimal, and can be changed later.
Reported and tested by: pgj
Diagnosed and reviewed by: kan (previous version)
Approved by: re (bz)
from NetBSD, with some slight changes:
=========================================================================================
http://cvsweb.netbsd.org/bsdweb.cgi/src/libexec/tftpd/tftpd.8?only_with_tag=MAIN#rev1.22
Revision 1.22 or diffs], Fri Jan 8 21:05:14 2010 UTC (18 months, 2 weeks ago) by christos
Patrick Welche <prlw1@cam.ac.uk>
- add -p pathsep option
- make wrap to zero work, but produce a warning
While here:
- fix gcc warnings, in particular variable clobbered warnings
(compiling with fewer warnings does not really fix the problem)
=========================================================================================
These wording changes clarify the default rollover behavior
as a "kludge". Also, the block numbers and octet counts for 65535 blocks
and 32767 blocks are more accurate than the existing documented numbers.
Requested by: Pawan Gupta <pawang at juniper dot net>
Obtained from: Juniper Networks
Approved by: re (kib)
the block counter would rollover to 0 if a file larger
than 65535 blocks was transferred. With the default block size
of 512 octets per block, this is a file size of approximately 32 megabytes.
The new TFTP server code would report an error and stop transferring
the file if a file was larger than 65535 blocks.
This patch restores the old TFTP server's behavior to the new
TFTP server code. If a TFTP client transfers a file larger
than 65535 blocks, and does *not* specify the "rollover" option,
then automatically rollover the block counter to 0 every time
we reach 65535 blocks.
This restores interoperability with the FreeBSD 6 TFTP client.
Without this change, if a FreeBSD 6 TFTP client tried to
retrieve a file larger than 65535 blocks from a FreeBSD 9 TFTP server
, the transfer would fail.
The same file could be retrieved successfully if the same FreeBSD 6
TFTP client was used against a FreeBSD 6 TFTP server.
Approved by: re (kib)
Tested by: Pawan Gupta <pawang at juniper dot net>,
Obtained from: Juniper Networks
tftp implementation. The synchnet() function
was converted to a no-op when the new TFTP implementation
was committed to FreeBSD. However, this function, as it was
in the older code, is needed
in order to synchronize between the tftpd server and tftp clients,
which may be buggy.
Specifically, we had a buggy TFTP client which would send
TFTP ACK packets for non-TFTP packets, which would cause
the count of packets to get out of whack, causing transfers
to fail with the new TFTPD implementation.
Obtained from: Juniper Networks
Submitted by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
- Remove unneeded linking against libmd. libulog depends on this
library, but the ulog-helper tool itself does not.
- Change the comment at the top to mention utmpx instead of utmp, wtmp
and lastlog.
- Simply use user_from_uid() to translate to a username string.
- Put variable declarations together.
